Skip to main content
Top
Published in: Mechanics of Composite Materials 1/2022

17-03-2022

A Review on Drilling of Fiber-Reinforced Polymer Composites

Authors: A. Mohan Kumar, R. Parameshwaran, R. Rajasekar, C. Moganapriya, R. Manivannan

Published in: Mechanics of Composite Materials | Issue 1/2022

Log in

Activate our intelligent search to find suitable subject content or patents.

search-config
loading …

Abstract

The drilling is a very important machining process to increase the joining efficiency of assembled parts. In this review, the consolidation of various composite materials with different fibers are discussed. Different drill tools, their materials and geometries, and drilling methods, such as conventional, vibration-assisted, and high-speed ones, are considered, and various numerical models for determining the critical thrust force and delamination are analyzed. It is concluded that unconventional geometries and materials give better results in reducing the thrust force and delamination compared than the traditional materials and geometrical shapes of drill tools

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

  • über 102.000 Bücher
  • über 537 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Finance + Banking
  • Management + Führung
  • Marketing + Vertrieb
  • Maschinenbau + Werkstoffe
  • Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

  • über 67.000 Bücher
  • über 390 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Maschinenbau + Werkstoffe




 

Jetzt Wissensvorsprung sichern!

Literature
1.
go back to reference R. Mishra, J. Malik, I. Singh, and J. P. Davim, “Neural network approach for estimating the residual tensile strength after drilling in uni-directional glass fiber reinforced plastic laminates,” Materials & Design, 31, No. 6, 2790-2795 (2010).CrossRef R. Mishra, J. Malik, I. Singh, and J. P. Davim, “Neural network approach for estimating the residual tensile strength after drilling in uni-directional glass fiber reinforced plastic laminates,” Materials & Design, 31, No. 6, 2790-2795 (2010).CrossRef
2.
go back to reference A. Hrechuk, V. Bushlya, and J.-E. Ståhl, “Hole-quality evaluation in drilling fiber-reinforced composites,” Composite Structures, 204, 378-387 (2018).CrossRef A. Hrechuk, V. Bushlya, and J.-E. Ståhl, “Hole-quality evaluation in drilling fiber-reinforced composites,” Composite Structures, 204, 378-387 (2018).CrossRef
3.
go back to reference A. M. Kumar, R. Parameshwaran, V. Krishnaraj, and R. Rajasekar, “Effects of thrust force variation during the drilling of pure and chemically treated Kevlar based polymer composites,” Materials Testing, 61, No. 9, 907-913 (2019).CrossRef A. M. Kumar, R. Parameshwaran, V. Krishnaraj, and R. Rajasekar, “Effects of thrust force variation during the drilling of pure and chemically treated Kevlar based polymer composites,” Materials Testing, 61, No. 9, 907-913 (2019).CrossRef
4.
go back to reference R. Parameshwaran, R. Rajasekar, V. H. Ragavendra, and N. Praveenraj, “Effect of thrust force, torque, and induced temperature on Kevlar reinforced composites during drilling process,” Materials Today: Proceedings (2020). R. Parameshwaran, R. Rajasekar, V. H. Ragavendra, and N. Praveenraj, “Effect of thrust force, torque, and induced temperature on Kevlar reinforced composites during drilling process,” Materials Today: Proceedings (2020).
5.
go back to reference S. Angadi, H. Ashrith, V. Gaitonde, S. Karnik, and M. Doddamani, “Experimental investigations on hole quality in drilling of cenosphere reinforced epoxy composite,” IOP Conference Series: Materials Science and Engineering (2019) IOP Publishing. S. Angadi, H. Ashrith, V. Gaitonde, S. Karnik, and M. Doddamani, “Experimental investigations on hole quality in drilling of cenosphere reinforced epoxy composite,” IOP Conference Series: Materials Science and Engineering (2019) IOP Publishing.
6.
go back to reference A. Lotfi, H. Li, D. V. Dao, and G. Prusty, “Natural fiber–reinforced composites: A review on material, manufacturing, and machinability,” Journal of Thermoplastic Composite Materials, 0892705719844546 (2019). A. Lotfi, H. Li, D. V. Dao, and G. Prusty, “Natural fiber–reinforced composites: A review on material, manufacturing, and machinability,” Journal of Thermoplastic Composite Materials, 0892705719844546 (2019).
7.
go back to reference I. Shyha, S. L. Soo, D. Aspinwall, and S. Bradley, “Effect of laminate configuration and feed rate on cutting performance when drilling holes in carbon fibre reinforced plastic composites,” Journal of Materials Processing Technology, 210, No. 8, 1023-1034 (2010).CrossRef I. Shyha, S. L. Soo, D. Aspinwall, and S. Bradley, “Effect of laminate configuration and feed rate on cutting performance when drilling holes in carbon fibre reinforced plastic composites,” Journal of Materials Processing Technology, 210, No. 8, 1023-1034 (2010).CrossRef
8.
go back to reference P. Rahmé, Y. Landon, F. Lachaud, R. Piquet, and P. Lagarrigue, “Analytical models of composite material drilling,” The International Journal of Advanced Manufacturing Technology, 52, Nos. 5-8, 609-617 (2011).CrossRef P. Rahmé, Y. Landon, F. Lachaud, R. Piquet, and P. Lagarrigue, “Analytical models of composite material drilling,” The International Journal of Advanced Manufacturing Technology, 52, Nos. 5-8, 609-617 (2011).CrossRef
9.
go back to reference S. Madhavan and S. B. Prabu, “Experimental investigation and analysis of thrust force in drilling of carbon fibre reinforced plastic composites using response surface methodology,” International Journal of Modern Engineering Research, 2, No. 4, 2719-2723 (2012). S. Madhavan and S. B. Prabu, “Experimental investigation and analysis of thrust force in drilling of carbon fibre reinforced plastic composites using response surface methodology,” International Journal of Modern Engineering Research, 2, No. 4, 2719-2723 (2012).
10.
go back to reference S. Lin and I. Chen, “Drilling carbon fiber-reinforced composite material at high speed,” Wear, 194, Nos. 1-2, 156-162 (1996). S. Lin and I. Chen, “Drilling carbon fiber-reinforced composite material at high speed,” Wear, 194, Nos. 1-2, 156-162 (1996).
11.
go back to reference W.-C. Chen, “Some experimental investigations in the drilling of carbon fiber-reinforced plastic (CFRP) composite laminates,” International Journal of Machine Tools and Manufacture, 37, No. 8, 1097-1108 (1997).CrossRef W.-C. Chen, “Some experimental investigations in the drilling of carbon fiber-reinforced plastic (CFRP) composite laminates,” International Journal of Machine Tools and Manufacture, 37, No. 8, 1097-1108 (1997).CrossRef
12.
go back to reference R. Piquet, B. Ferret, F. Lachaud, and P. Swider, “Experimental analysis of drilling damage in thin carbon/epoxy plate using special drills,” Composites Part A: Applied Science and Manufacturing, 31, No. 10, 1107-1115 (2000).CrossRef R. Piquet, B. Ferret, F. Lachaud, and P. Swider, “Experimental analysis of drilling damage in thin carbon/epoxy plate using special drills,” Composites Part A: Applied Science and Manufacturing, 31, No. 10, 1107-1115 (2000).CrossRef
13.
go back to reference L. Durao, M. De Moura, and A. T. Marques, “Numerical simulation of the drilling process on carbon/epoxy composite laminates,” Composites Part A: Applied Science and Manufacturing, 37, No. 9, 1325-1333 (2006).CrossRef L. Durao, M. De Moura, and A. T. Marques, “Numerical simulation of the drilling process on carbon/epoxy composite laminates,” Composites Part A: Applied Science and Manufacturing, 37, No. 9, 1325-1333 (2006).CrossRef
14.
go back to reference L. M. P. Durão, A. Magalhães, A. T. Marques, A. Baptista, and M. Figueiredo, “Drilling of fibre reinforced plastic laminates,” in Materials Science Forum, Trans. Tech. Publ. (2008). L. M. P. Durão, A. Magalhães, A. T. Marques, A. Baptista, and M. Figueiredo, “Drilling of fibre reinforced plastic laminates,” in Materials Science Forum, Trans. Tech. Publ. (2008).
15.
go back to reference R. Zitoune and F. Collombet, “Numerical prediction of the thrust force responsible of delamination during the drilling of the long-fibre composite structures,” Composites Part A: Applied Science and Manufacturing, 38, No. 3, 858-866 (2007).CrossRef R. Zitoune and F. Collombet, “Numerical prediction of the thrust force responsible of delamination during the drilling of the long-fibre composite structures,” Composites Part A: Applied Science and Manufacturing, 38, No. 3, 858-866 (2007).CrossRef
16.
go back to reference S. Rawat and H. Attia, “Characterization of the dry high speed drilling process of woven composites using Machinability Maps approach,” CIRP Annals. 58, No. 1, 105-108 (2009).CrossRef S. Rawat and H. Attia, “Characterization of the dry high speed drilling process of woven composites using Machinability Maps approach,” CIRP Annals. 58, No. 1, 105-108 (2009).CrossRef
17.
go back to reference A. S. Jahromi and B. Bahr, “An analytical method for predicting cutting forces in orthogonal machining of unidirectional composites,” Composites Science and Technology, 70, No. 16, 2290-2297 (2010).CrossRef A. S. Jahromi and B. Bahr, “An analytical method for predicting cutting forces in orthogonal machining of unidirectional composites,” Composites Science and Technology, 70, No. 16, 2290-2297 (2010).CrossRef
18.
go back to reference H. Rezghi Maleki, M. Hamedi, M. Kubouchi, and Y. Arao, “Experimental investigation on drilling of natural flax fiberreinforced composites,” Materials and Manufacturing Processes, 34, No. 3, 283-292 (2019).CrossRef H. Rezghi Maleki, M. Hamedi, M. Kubouchi, and Y. Arao, “Experimental investigation on drilling of natural flax fiberreinforced composites,” Materials and Manufacturing Processes, 34, No. 3, 283-292 (2019).CrossRef
19.
go back to reference D. Kalla, J. Sheikh-Ahmad, and J. Twomey, “Prediction of cutting forces in helical end milling fiber reinforced polymers,” International Journal of Machine Tools and Manufacture, 50, No. 10, 882-891 (2010).CrossRef D. Kalla, J. Sheikh-Ahmad, and J. Twomey, “Prediction of cutting forces in helical end milling fiber reinforced polymers,” International Journal of Machine Tools and Manufacture, 50, No. 10, 882-891 (2010).CrossRef
20.
go back to reference A. T. Marques, L. M. Durão, A. G. Magalhães, J. F. Silva, and J. M. R. Tavares, “Delamination analysis of carbon fibre reinforced laminates: evaluation of a special step drill,” Composites Science and Technology, 69, No. 14, 2376-2382 (2009).CrossRef A. T. Marques, L. M. Durão, A. G. Magalhães, J. F. Silva, and J. M. R. Tavares, “Delamination analysis of carbon fibre reinforced laminates: evaluation of a special step drill,” Composites Science and Technology, 69, No. 14, 2376-2382 (2009).CrossRef
21.
go back to reference R. Kishore, R. Tiwari, A. Dvivedi, and I. Singh, “Taguchi analysis of the residual tensile strength after drilling in glass fiber reinforced epoxy composites,” Materials & Design, 30, No. 6, 2186-2190 (2009).CrossRef R. Kishore, R. Tiwari, A. Dvivedi, and I. Singh, “Taguchi analysis of the residual tensile strength after drilling in glass fiber reinforced epoxy composites,” Materials & Design, 30, No. 6, 2186-2190 (2009).CrossRef
22.
go back to reference K. Y. Park, J. H. Choi, and D. G. Lee, “Delamination-free and high efficiency drilling of carbon fiber reinforced plastics,” Journal of Composite Materials, 29, No. 15, 1988-2002 (1995).CrossRef K. Y. Park, J. H. Choi, and D. G. Lee, “Delamination-free and high efficiency drilling of carbon fiber reinforced plastics,” Journal of Composite Materials, 29, No. 15, 1988-2002 (1995).CrossRef
23.
go back to reference N. Bhatnagar, N. Ramakrishnan, N. Naik, and R. Komanduri, “On the machining of fiber reinforced plastic (FRP) composite laminates,” International Journal of Machine Tools and Manufacture, 35, No. 5, 701-716 (1995).CrossRef N. Bhatnagar, N. Ramakrishnan, N. Naik, and R. Komanduri, “On the machining of fiber reinforced plastic (FRP) composite laminates,” International Journal of Machine Tools and Manufacture, 35, No. 5, 701-716 (1995).CrossRef
24.
go back to reference C. Murphy, G. Byrne, and M. Gilchrist, “The performance of coated tungsten carbide drills when machining carbon fibre-reinforced epoxy composite materials,” Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 216, No. 2, 143-152 (2002).CrossRef C. Murphy, G. Byrne, and M. Gilchrist, “The performance of coated tungsten carbide drills when machining carbon fibre-reinforced epoxy composite materials,” Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 216, No. 2, 143-152 (2002).CrossRef
25.
go back to reference Z. Linbo, W. Lijiang, and W. Xin, “Study on vibration drilling of fiber reinforced plastics with hybrid variation parameters method,” Composites Part A: Applied Science and Manufacturing, 34, No. 3, 237-244 (2003).CrossRef Z. Linbo, W. Lijiang, and W. Xin, “Study on vibration drilling of fiber reinforced plastics with hybrid variation parameters method,” Composites Part A: Applied Science and Manufacturing, 34, No. 3, 237-244 (2003).CrossRef
26.
go back to reference X. Wang, L. Wang, and J. Tao, “Investigation on thrust in vibration drilling of fiber-reinforced plastics,” Journal of Materials Processing Technology, 148, No. 2, 239-244 (2004).CrossRef X. Wang, L. Wang, and J. Tao, “Investigation on thrust in vibration drilling of fiber-reinforced plastics,” Journal of Materials Processing Technology, 148, No. 2, 239-244 (2004).CrossRef
27.
go back to reference R. Zitoune, F. Collombet, F. Lachaud, R. Piquet, and P. Pasquet, “Experiment–calculation comparison of the cutting conditions representative of the long fiber composite drilling phase,” Composites Science and Technology, 65, Nos. 3-4, 455-466 (2005).CrossRef R. Zitoune, F. Collombet, F. Lachaud, R. Piquet, and P. Pasquet, “Experiment–calculation comparison of the cutting conditions representative of the long fiber composite drilling phase,” Composites Science and Technology, 65, Nos. 3-4, 455-466 (2005).CrossRef
28.
go back to reference L. Durão, M. De Moura, and A. Marques, “Numerical prediction of delamination onset in carbon/epoxy composites drilling,” Engineering Fracture Mechanics, 75, No. 9, 2767-2778 (2008).CrossRef L. Durão, M. De Moura, and A. Marques, “Numerical prediction of delamination onset in carbon/epoxy composites drilling,” Engineering Fracture Mechanics, 75, No. 9, 2767-2778 (2008).CrossRef
29.
go back to reference L. M. P. Durão, D. J. Gonçalves, J. M. R. Tavares, V. H. C. de Albuquerque, and A. T. Marques, “Comparative analysis of drills for composite laminates,” Journal of Composite Materials, 46, No. 14, 1649-1659 (2012).CrossRef L. M. P. Durão, D. J. Gonçalves, J. M. R. Tavares, V. H. C. de Albuquerque, and A. T. Marques, “Comparative analysis of drills for composite laminates,” Journal of Composite Materials, 46, No. 14, 1649-1659 (2012).CrossRef
30.
go back to reference G. V. G. Rao, P. Mahajan, and N. Bhatnagar, “Micro-mechanical modeling of machining of FRP composites–Cutting force analysis,” Composites Science and Technology, 67, Nos. 3-4, 579-593 (2007).CrossRef G. V. G. Rao, P. Mahajan, and N. Bhatnagar, “Micro-mechanical modeling of machining of FRP composites–Cutting force analysis,” Composites Science and Technology, 67, Nos. 3-4, 579-593 (2007).CrossRef
31.
go back to reference D. Iliescu, D. Gehin, M. Gutierrez, and F. Girot, “Modeling and tool wear in drilling of CFRP,” International Journal of Machine Tools and Manufacture, 50, No. 2, 204-213 (2010).CrossRef D. Iliescu, D. Gehin, M. Gutierrez, and F. Girot, “Modeling and tool wear in drilling of CFRP,” International Journal of Machine Tools and Manufacture, 50, No. 2, 204-213 (2010).CrossRef
32.
go back to reference S. Amini, M. Baraheni, and M. Moeini Afzal, “Statistical study of the effect of various machining parameters on delamination in drilling of carbon fiber reinforced composites,” Journal of Science and Technology of Composites, 5, No. 1, 41-50 (2018). S. Amini, M. Baraheni, and M. Moeini Afzal, “Statistical study of the effect of various machining parameters on delamination in drilling of carbon fiber reinforced composites,” Journal of Science and Technology of Composites, 5, No. 1, 41-50 (2018).
33.
go back to reference S. Rawat and H. Attia, “Wear mechanisms and tool life management of WC–Co drills during dry high speed drilling of woven carbon fibre composites,” Wear, 267, Nos. 5-8, 1022-1030 (2009).CrossRef S. Rawat and H. Attia, “Wear mechanisms and tool life management of WC–Co drills during dry high speed drilling of woven carbon fibre composites,” Wear, 267, Nos. 5-8, 1022-1030 (2009).CrossRef
34.
go back to reference D. Liu, H.H. Xu, C.Y. Zhang, and H. J. Yan, “Drilling force in high speed drilling carbon fibre reinforced plastics (CFRP) using half core drill, ” in Advanced Materials Research, Trans. Tech. Publ. (2010). D. Liu, H.H. Xu, C.Y. Zhang, and H. J. Yan, “Drilling force in high speed drilling carbon fibre reinforced plastics (CFRP) using half core drill, ” in Advanced Materials Research, Trans. Tech. Publ. (2010).
35.
go back to reference M.-B. Lazar and P. Xirouchakis, “Experimental analysis of drilling fiber reinforced composites,” International Journal of Machine Tools and Manufacture, 51, No. 12, 937-946 (2011).CrossRef M.-B. Lazar and P. Xirouchakis, “Experimental analysis of drilling fiber reinforced composites,” International Journal of Machine Tools and Manufacture, 51, No. 12, 937-946 (2011).CrossRef
36.
go back to reference A. Sadek, M. Meshreki, and M. Attia, “Characterization and optimization of orbital drilling of woven carbon fiber reinforced epoxy laminates,” CIRP annals, 61, No. 1, 123-126 (2012).CrossRef A. Sadek, M. Meshreki, and M. Attia, “Characterization and optimization of orbital drilling of woven carbon fiber reinforced epoxy laminates,” CIRP annals, 61, No. 1, 123-126 (2012).CrossRef
37.
go back to reference C. Tsao, H. Hocheng, and Y. Chen, “Delamination reduction in drilling composite materials by active backup force,” CIRP annals, 61, No. 1, 91-94 (2012).CrossRef C. Tsao, H. Hocheng, and Y. Chen, “Delamination reduction in drilling composite materials by active backup force,” CIRP annals, 61, No. 1, 91-94 (2012).CrossRef
38.
go back to reference V. A. Phadnis, F. Makhdum, A. Roy, and V. V. Silberschmidt, “Drilling in carbon/epoxy composites: experimental investigations and finite element implementation,” Composites Part A: Applied Science and Manufacturing, 47, 41-51 (2013).CrossRef V. A. Phadnis, F. Makhdum, A. Roy, and V. V. Silberschmidt, “Drilling in carbon/epoxy composites: experimental investigations and finite element implementation,” Composites Part A: Applied Science and Manufacturing, 47, 41-51 (2013).CrossRef
39.
go back to reference A. Krishnamoorthy, S. R. Boopathy, and K. Palanikumar, “Delamination prediction in drilling of CFRP composites using artificial neural network,” Journal of Engineering Science and Technology, 6, No. 2, 191-203 (2011). A. Krishnamoorthy, S. R. Boopathy, and K. Palanikumar, “Delamination prediction in drilling of CFRP composites using artificial neural network,” Journal of Engineering Science and Technology, 6, No. 2, 191-203 (2011).
40.
go back to reference V. Gaitonde, S. Karnik, J. C. Rubio, A. E. Correia, A. Abrao, and J. P. Davim, “Analysis of parametric influence on delamination in high-speed drilling of carbon fiber reinforced plastic composites,” Journal of Materials Processing Technology, 203, Nos. 1-3, 431-438 (2008).CrossRef V. Gaitonde, S. Karnik, J. C. Rubio, A. E. Correia, A. Abrao, and J. P. Davim, “Analysis of parametric influence on delamination in high-speed drilling of carbon fiber reinforced plastic composites,” Journal of Materials Processing Technology, 203, Nos. 1-3, 431-438 (2008).CrossRef
41.
go back to reference A. Faraz, D. Biermann, and K. Weinert, “Cutting edge rounding: An innovative tool wear criterion in drilling CFRP composite laminates,” International Journal of Machine Tools and Manufacture, 49, No. 15, 1185-1196 (2009).CrossRef A. Faraz, D. Biermann, and K. Weinert, “Cutting edge rounding: An innovative tool wear criterion in drilling CFRP composite laminates,” International Journal of Machine Tools and Manufacture, 49, No. 15, 1185-1196 (2009).CrossRef
42.
go back to reference I. Shyha, D. Aspinwall, S. L. Soo, and S. Bradley, “Drill geometry and operating effects when cutting small diameter holes in CFRP,” International Journal of Machine Tools and Manufacture, 49, Nos. 12-13, 1008-1014 (2009).CrossRef I. Shyha, D. Aspinwall, S. L. Soo, and S. Bradley, “Drill geometry and operating effects when cutting small diameter holes in CFRP,” International Journal of Machine Tools and Manufacture, 49, Nos. 12-13, 1008-1014 (2009).CrossRef
43.
go back to reference J. P. Davim and P. Reis, “Drilling carbon fiber reinforced plastics manufactured by autoclave—experimental and statistical study,” Materials & Design, 24, No. 5, 315-324 (2003).CrossRef J. P. Davim and P. Reis, “Drilling carbon fiber reinforced plastics manufactured by autoclave—experimental and statistical study,” Materials & Design, 24, No. 5, 315-324 (2003).CrossRef
44.
go back to reference J. P. Davim and P. Reis, “Study of delamination in drilling carbon fiber reinforced plastics (CFRP) using design experiments,” Composite Structures, 59, No. 4, 481-487 (2003).CrossRef J. P. Davim and P. Reis, “Study of delamination in drilling carbon fiber reinforced plastics (CFRP) using design experiments,” Composite Structures, 59, No. 4, 481-487 (2003).CrossRef
45.
go back to reference J. P. Davim and P. Reis, “Damage and dimensional precision on milling carbon fiber-reinforced plastics using design experiments,” Journal of Materials Processing Technology, 160, No. 2, 160-167 (2005).CrossRef J. P. Davim and P. Reis, “Damage and dimensional precision on milling carbon fiber-reinforced plastics using design experiments,” Journal of Materials Processing Technology, 160, No. 2, 160-167 (2005).CrossRef
46.
go back to reference J. P. Davim, J. C. Rubio, and A. Abrao, “A novel approach based on digital image analysis to evaluate the delamination factor after drilling composite laminates,” Composites Science and Technology, 67, No. 9, 1939-1945 (2007).CrossRef J. P. Davim, J. C. Rubio, and A. Abrao, “A novel approach based on digital image analysis to evaluate the delamination factor after drilling composite laminates,” Composites Science and Technology, 67, No. 9, 1939-1945 (2007).CrossRef
47.
go back to reference C. Tsao and H. Hocheng, “Taguchi analysis of delamination associated with various drill bits in drilling of composite material,” International Journal of Machine Tools and Manufacture, 44, No. 10, 1085-1090 (2004).CrossRef C. Tsao and H. Hocheng, “Taguchi analysis of delamination associated with various drill bits in drilling of composite material,” International Journal of Machine Tools and Manufacture, 44, No. 10, 1085-1090 (2004).CrossRef
48.
go back to reference L. Lasri, M. Nouari, and M. El Mansori, “Modelling of chip separation in machining unidirectional FRP composites by stiffness degradation concept,” Composites Science and Technology, 69, No. 5, 684-692 (2009).CrossRef L. Lasri, M. Nouari, and M. El Mansori, “Modelling of chip separation in machining unidirectional FRP composites by stiffness degradation concept,” Composites Science and Technology, 69, No. 5, 684-692 (2009).CrossRef
49.
go back to reference E. Kilickap, “Optimization of cutting parameters on delamination based on Taguchi method during drilling of GFRP composite,” Expert Systems with Applications, 37, No. 8, 6116-6122 (2010).CrossRef E. Kilickap, “Optimization of cutting parameters on delamination based on Taguchi method during drilling of GFRP composite,” Expert Systems with Applications, 37, No. 8, 6116-6122 (2010).CrossRef
50.
go back to reference G. Baskaran, S. Gowri, and R. Krishnamurthy, “Study on vital static properties of fine blanking of GFRP composites with that of conventional drilling,” The International Journal of Advanced Manufacturing Technology, 50, Nos. 5-8, 659-666 (2010).CrossRef G. Baskaran, S. Gowri, and R. Krishnamurthy, “Study on vital static properties of fine blanking of GFRP composites with that of conventional drilling,” The International Journal of Advanced Manufacturing Technology, 50, Nos. 5-8, 659-666 (2010).CrossRef
51.
go back to reference N. Z. Karimi, H. Heidary, G. Minak, and M. Ahmadi, “Effect of the drilling process on the compression behavior of glass/epoxy laminates,” Composite Structures, 98, 59-68 (2013).CrossRef N. Z. Karimi, H. Heidary, G. Minak, and M. Ahmadi, “Effect of the drilling process on the compression behavior of glass/epoxy laminates,” Composite Structures, 98, 59-68 (2013).CrossRef
52.
go back to reference J. Mathew, N. Ramakrishnan, and N. Naik, “Investigations into the effect of geometry of a trepanning tool on thrust and torque during drilling of GFRP composites,” Journal of Materials Processing Technology, 91, Nos. 1-3, 1-11 (1999).CrossRef J. Mathew, N. Ramakrishnan, and N. Naik, “Investigations into the effect of geometry of a trepanning tool on thrust and torque during drilling of GFRP composites,” Journal of Materials Processing Technology, 91, Nos. 1-3, 1-11 (1999).CrossRef
53.
go back to reference J. Ramkumar, S. Aravindan, S. Malhotra, and R. Krishnamurthy, “An enhancement of the machining performance of GFRP by oscillatory assisted drilling,” The International Journal of Advanced Manufacturing Technology, 23, Nos. 3-4, 240-244 (2004).CrossRef J. Ramkumar, S. Aravindan, S. Malhotra, and R. Krishnamurthy, “An enhancement of the machining performance of GFRP by oscillatory assisted drilling,” The International Journal of Advanced Manufacturing Technology, 23, Nos. 3-4, 240-244 (2004).CrossRef
54.
go back to reference J. Ramkumar, S. Malhotra, and R. Krishnamurthy, “Effect of workpiece vibration on drilling of GFRP laminates,” Journal of Materials Processing Technology, 152, No. 3, 329-332 (2004).CrossRef J. Ramkumar, S. Malhotra, and R. Krishnamurthy, “Effect of workpiece vibration on drilling of GFRP laminates,” Journal of Materials Processing Technology, 152, No. 3, 329-332 (2004).CrossRef
55.
go back to reference E. Capello, “Workpiece damping and its effect on delamination damage in drilling thin composite laminates,” Journal of Materials Processing Technology, 148, No. 2, 186-195 (2004).CrossRef E. Capello, “Workpiece damping and its effect on delamination damage in drilling thin composite laminates,” Journal of Materials Processing Technology, 148, No. 2, 186-195 (2004).CrossRef
56.
go back to reference G. V. G. Rao, P. Mahajan, and N. Bhatnagar, “Machining of UD-GFRP composites chip formation mechanism,” Composites Science and Technology, 67, Nos. 11-12, 2271-2281 (2007).CrossRef G. V. G. Rao, P. Mahajan, and N. Bhatnagar, “Machining of UD-GFRP composites chip formation mechanism,” Composites Science and Technology, 67, Nos. 11-12, 2271-2281 (2007).CrossRef
57.
go back to reference A. Mkaddem, I. Demirci, and M. El Mansori, “A micro–macro combined approach using FEM for modelling of machining of FRP composites: Cutting forces analysis,” Composites Science and Technology, 68, Nos. 15-16, 3123-3127 (2008).CrossRef A. Mkaddem, I. Demirci, and M. El Mansori, “A micro–macro combined approach using FEM for modelling of machining of FRP composites: Cutting forces analysis,” Composites Science and Technology, 68, Nos. 15-16, 3123-3127 (2008).CrossRef
58.
go back to reference F. A. Ghasemi, A. Hyvadi, G. Payganeh, and N. B. M. Arab, “Effects of drilling parameters on delamination of glassepoxy composites,” Australian Journal of Basic and Applied Sciences, 5, No. 12, 1433-1440 (2011). F. A. Ghasemi, A. Hyvadi, G. Payganeh, and N. B. M. Arab, “Effects of drilling parameters on delamination of glassepoxy composites,” Australian Journal of Basic and Applied Sciences, 5, No. 12, 1433-1440 (2011).
59.
go back to reference U. Khashaba, I. El-Sonbaty, A. Selmy, and A. Megahed, “Machinability analysis in drilling woven GFR/epoxy composites: Part I–Effect of machining parameters,” Composites Part A: Applied Science and Manufacturing, 41, No. 3, 391-400 (2010). U. Khashaba, I. El-Sonbaty, A. Selmy, and A. Megahed, “Machinability analysis in drilling woven GFR/epoxy composites: Part I–Effect of machining parameters,” Composites Part A: Applied Science and Manufacturing, 41, No. 3, 391-400 (2010).
60.
go back to reference B. Işık and E. Ekici, “Experimental investigations of damage analysis in drilling of woven glass fiber-reinforced plastic composites,” The International Journal of Advanced Manufacturing Technology, 49, Nos. 9-12, 861-869 (2010).CrossRef B. Işık and E. Ekici, “Experimental investigations of damage analysis in drilling of woven glass fiber-reinforced plastic composites,” The International Journal of Advanced Manufacturing Technology, 49, Nos. 9-12, 861-869 (2010).CrossRef
61.
go back to reference P. Mehbudi, V. Baghlani, J. Akbari, A. Bushroa, and N. Mardi, “Applying ultrasonic vibration to decrease drillinginduced delamination in GFRP laminates,” Procedia Cirp. 6, No. 577-582 (2013).CrossRef P. Mehbudi, V. Baghlani, J. Akbari, A. Bushroa, and N. Mardi, “Applying ultrasonic vibration to decrease drillinginduced delamination in GFRP laminates,” Procedia Cirp. 6, No. 577-582 (2013).CrossRef
62.
go back to reference N. D. Chakladar, S. K. Pal, and P. Mandal, “Drilling of woven glass fiber-reinforced plastic—an experimental and finite element study,” The International Journal of Advanced Manufacturing Technology, 58, Nos. 1-4, 267-278 (2012).CrossRef N. D. Chakladar, S. K. Pal, and P. Mandal, “Drilling of woven glass fiber-reinforced plastic—an experimental and finite element study,” The International Journal of Advanced Manufacturing Technology, 58, Nos. 1-4, 267-278 (2012).CrossRef
63.
go back to reference A. Kentli, “Experimental study on peck drilling of GFRP and prediction of drilling-induced damage using ANN,” Scientific Research and Essays, 6, No. 7, 1546-1554 (2011). A. Kentli, “Experimental study on peck drilling of GFRP and prediction of drilling-induced damage using ANN,” Scientific Research and Essays, 6, No. 7, 1546-1554 (2011).
64.
go back to reference S. Jayabal and U. Natarajan, “Influence of cutting parameters on thrust force and torque in drilling of E-glass/polyester composites,” Indian J. Eng. and Mater. Sci., 17, No. 6, 463-470 (2010). S. Jayabal and U. Natarajan, “Influence of cutting parameters on thrust force and torque in drilling of E-glass/polyester composites,” Indian J. Eng. and Mater. Sci., 17, No. 6, 463-470 (2010).
65.
go back to reference K. Palanikumar, “Experimental investigation and optimisation in drilling of GFRP composites,” Measurement, 44, No. 10, 2138-2148 (2011).CrossRef K. Palanikumar, “Experimental investigation and optimisation in drilling of GFRP composites,” Measurement, 44, No. 10, 2138-2148 (2011).CrossRef
66.
go back to reference A. Velayudham, R. Krishnamurthy, and T. Soundarapandian, “Evaluation of drilling characteristics of high volume fraction fibre glass reinforced polymeric composite,” International Journal of Machine Tools and Manufacture, 45, Nos. 4-5, 399-406 (2005).CrossRef A. Velayudham, R. Krishnamurthy, and T. Soundarapandian, “Evaluation of drilling characteristics of high volume fraction fibre glass reinforced polymeric composite,” International Journal of Machine Tools and Manufacture, 45, Nos. 4-5, 399-406 (2005).CrossRef
67.
go back to reference A. Velayudham, R. Krishnamurthy, and T. Soundarapandian, “Acoustic emission based drill condition monitoring during drilling of glass/phenolic polymeric composite using wavelet packet transform,” Materials Science and Engineering: A, 412, Nos. 1-2, 141-145 (2005).CrossRef A. Velayudham, R. Krishnamurthy, and T. Soundarapandian, “Acoustic emission based drill condition monitoring during drilling of glass/phenolic polymeric composite using wavelet packet transform,” Materials Science and Engineering: A, 412, Nos. 1-2, 141-145 (2005).CrossRef
68.
go back to reference S. Arul, L. Vijayaraghavan, S. Malhotra, and R. Krishnamurthy, “Influence of tool material on dynamics of drilling of GFRP composites,” The International Journal of Advanced Manufacturing Technology, 29, Nos. 7-8, 655-662 (2006).CrossRef S. Arul, L. Vijayaraghavan, S. Malhotra, and R. Krishnamurthy, “Influence of tool material on dynamics of drilling of GFRP composites,” The International Journal of Advanced Manufacturing Technology, 29, Nos. 7-8, 655-662 (2006).CrossRef
69.
go back to reference S. Arul, L. Vijayaraghavan, S. Malhotra, and R. Krishnamurthy, “The effect of vibratory drilling on hole quality in polymeric composites,” International Journal of Machine Tools and Manufacture, 46, Nos. 3-4, 252-259 (2006).CrossRef S. Arul, L. Vijayaraghavan, S. Malhotra, and R. Krishnamurthy, “The effect of vibratory drilling on hole quality in polymeric composites,” International Journal of Machine Tools and Manufacture, 46, Nos. 3-4, 252-259 (2006).CrossRef
70.
go back to reference J. C. Rubio, A. Abrao, P. Faria, A. E. Correia, and J. P. Davim, “Effects of high speed in the drilling of glass fibre reinforced plastic: evaluation of the delamination factor,” International Journal of Machine Tools and Manufacture, 48, No. 6, 715-720 (2008).CrossRef J. C. Rubio, A. Abrao, P. Faria, A. E. Correia, and J. P. Davim, “Effects of high speed in the drilling of glass fibre reinforced plastic: evaluation of the delamination factor,” International Journal of Machine Tools and Manufacture, 48, No. 6, 715-720 (2008).CrossRef
71.
go back to reference B. Murthy, L. Rodrigues, and A. Devineni, “Process parameters optimization in GFRP drilling through integration of Taguchi and response surface methodology,” Research Journal of Recent Sciences ISSN. 2277, 2502 (2012). B. Murthy, L. Rodrigues, and A. Devineni, “Process parameters optimization in GFRP drilling through integration of Taguchi and response surface methodology,” Research Journal of Recent Sciences ISSN. 2277, 2502 (2012).
72.
go back to reference T. Panneerselvam, S. Raghuraman, and A. Vidyasundar, “A study to minimise delamination value during drilling chopped strand mat GFRP material,” International Journal of Machining and Machinability of Materials. 15, Nos. 3-4, 136-146 (2014).CrossRef T. Panneerselvam, S. Raghuraman, and A. Vidyasundar, “A study to minimise delamination value during drilling chopped strand mat GFRP material,” International Journal of Machining and Machinability of Materials. 15, Nos. 3-4, 136-146 (2014).CrossRef
73.
go back to reference K.-H. Park, A. Beal, P. Kwon, and J. Lantrip, “Tool wear in drilling of composite/titanium stacks using carbide and polycrystalline diamond tools,” Wear, 271, No. 11-12, 2826-2835 (2011).CrossRef K.-H. Park, A. Beal, P. Kwon, and J. Lantrip, “Tool wear in drilling of composite/titanium stacks using carbide and polycrystalline diamond tools,” Wear, 271, No. 11-12, 2826-2835 (2011).CrossRef
74.
go back to reference M. Ramulu, T. Branson, and D. Kim, “A study on the drilling of composite and titanium stacks,” Composite Structures, 54, No. 1, 67-77 (2001).CrossRef M. Ramulu, T. Branson, and D. Kim, “A study on the drilling of composite and titanium stacks,” Composite Structures, 54, No. 1, 67-77 (2001).CrossRef
75.
go back to reference D. Kim and M. Ramulu, “Drilling process optimization for graphite/bismaleimide–titanium alloy stacks,” Composite Structures, 63, No. 1, 101-114 (2004).CrossRef D. Kim and M. Ramulu, “Drilling process optimization for graphite/bismaleimide–titanium alloy stacks,” Composite Structures, 63, No. 1, 101-114 (2004).CrossRef
76.
go back to reference B. Denkena, D. Boehnke, and J. Dege, “Helical milling of CFRP–titanium layer compounds,” CIRP Journal of Manufacturing Science and Technology, 1, No. 2, 64-69 (2008).CrossRef B. Denkena, D. Boehnke, and J. Dege, “Helical milling of CFRP–titanium layer compounds,” CIRP Journal of Manufacturing Science and Technology, 1, No. 2, 64-69 (2008).CrossRef
77.
go back to reference K. Giasin and S. Ayvar-Soberanis, “An investigation of burrs, chip formation, hole size, circularity and delamination during drilling operation of GLARE using ANOVA,” Composite Structures, 159, 745-760 (2017).CrossRef K. Giasin and S. Ayvar-Soberanis, “An investigation of burrs, chip formation, hole size, circularity and delamination during drilling operation of GLARE using ANOVA,” Composite Structures, 159, 745-760 (2017).CrossRef
78.
go back to reference S. Y. Park, W. J. Choi, C. H. Choi, and H. S. Choi, “Effect of drilling parameters on hole quality and delamination of hybrid GLARE laminate,” Composite Structures, 185, 684-698 (2018).CrossRef S. Y. Park, W. J. Choi, C. H. Choi, and H. S. Choi, “Effect of drilling parameters on hole quality and delamination of hybrid GLARE laminate,” Composite Structures, 185, 684-698 (2018).CrossRef
79.
go back to reference O. A. Pawar, Y. S. Gaikhe, A. Tewari, R. Sundaram, and S. S. Joshi, “Analysis of hole quality in drilling GLARE metal fiber laminates,” Composite Structures, 123, 350-365 (2015).CrossRef O. A. Pawar, Y. S. Gaikhe, A. Tewari, R. Sundaram, and S. S. Joshi, “Analysis of hole quality in drilling GLARE metal fiber laminates,” Composite Structures, 123, 350-365 (2015).CrossRef
80.
go back to reference P. Tyczynski, J. Lemanczyk, and R. Ostrowski, “Drilling of CFRP, GFRP, glare type composites,” Aircraft Engineering and Aerospace Technology: An International Journal, 86, No. 4, 312-322 (2014).CrossRef P. Tyczynski, J. Lemanczyk, and R. Ostrowski, “Drilling of CFRP, GFRP, glare type composites,” Aircraft Engineering and Aerospace Technology: An International Journal, 86, No. 4, 312-322 (2014).CrossRef
81.
go back to reference R. Zitoune, V. Krishnaraj, and F. Collombet, “Study of drilling of composite material and aluminium stack,” Composite Structures, 92, No. 5, 1246-1255 (2010).CrossRef R. Zitoune, V. Krishnaraj, and F. Collombet, “Study of drilling of composite material and aluminium stack,” Composite Structures, 92, No. 5, 1246-1255 (2010).CrossRef
82.
go back to reference E. Brinksmeier and R. Janssen, “Drilling of multi-layer composite materials consisting of carbon fiber reinforced plastics (CFRP), titanium and aluminum alloys,” CIRP Annals, 51, No. 1, 87-90 (2002).CrossRef E. Brinksmeier and R. Janssen, “Drilling of multi-layer composite materials consisting of carbon fiber reinforced plastics (CFRP), titanium and aluminum alloys,” CIRP Annals, 51, No. 1, 87-90 (2002).CrossRef
83.
go back to reference G.W. Kim and K.Y. Lee, “Critical thrust force at propagation of delamination zone due to drilling of FRP/metallic strips,” Composite Structures, 69, No. 2, 137-141 (2005).CrossRef G.W. Kim and K.Y. Lee, “Critical thrust force at propagation of delamination zone due to drilling of FRP/metallic strips,” Composite Structures, 69, No. 2, 137-141 (2005).CrossRef
84.
go back to reference M. Sánchez Carrilero, M. Álvarez, E. Ares, J. Astorga, M. Cano, and M. Marcos Bárcena. Dry drilling of metal fiber laminates CF/AA2024. A preliminary study. in Materials science Forum, Trans. Tech. Publ. (2006). M. Sánchez Carrilero, M. Álvarez, E. Ares, J. Astorga, M. Cano, and M. Marcos Bárcena. Dry drilling of metal fiber laminates CF/AA2024. A preliminary study. in Materials science Forum, Trans. Tech. Publ. (2006).
85.
go back to reference K. Giasin, S. Ayvar-Soberanis, and A. Hodzic, “An experimental study on drilling of unidirectional GLARE fibre metal laminates,” Composite Structures, 133, 794-808 (2015).CrossRef K. Giasin, S. Ayvar-Soberanis, and A. Hodzic, “An experimental study on drilling of unidirectional GLARE fibre metal laminates,” Composite Structures, 133, 794-808 (2015).CrossRef
86.
go back to reference C. Kuo, Z. Li, and C. Wang, “Multi-objective optimisation in vibration-assisted drilling of CFRP/Al stacks,” Composite Structures, 173, 196-209 (2017).CrossRef C. Kuo, Z. Li, and C. Wang, “Multi-objective optimisation in vibration-assisted drilling of CFRP/Al stacks,” Composite Structures, 173, 196-209 (2017).CrossRef
87.
go back to reference I. Shyha, S. L. Soo, D. K. Aspinwall, S. Bradley, S. Dawson, and C. J. Pretorius, “Drilling of titanium/CFRP/aluminium stacks,” Key Engineering Materials, Trans. Tech. Publ., 447-448, 624-633 (2010). I. Shyha, S. L. Soo, D. K. Aspinwall, S. Bradley, S. Dawson, and C. J. Pretorius, “Drilling of titanium/CFRP/aluminium stacks,” Key Engineering Materials, Trans. Tech. Publ., 447-448, 624-633 (2010).
88.
go back to reference E. Brinksmeier, S. Fangmann, and R. Rentsch, “Drilling of composites and resulting surface integrity,” CIRP Annals, 60, No. 1, 57-60 (2011).CrossRef E. Brinksmeier, S. Fangmann, and R. Rentsch, “Drilling of composites and resulting surface integrity,” CIRP Annals, 60, No. 1, 57-60 (2011).CrossRef
89.
go back to reference L. Zheng, H. Zhou, C. Gao, and J. Yuan, “Hole drilling in ceramics/Kevlar fiber reinforced plastics double-plate composite armor using diamond core drill,” Materials & Design, 40, 461-466 (2012).CrossRef L. Zheng, H. Zhou, C. Gao, and J. Yuan, “Hole drilling in ceramics/Kevlar fiber reinforced plastics double-plate composite armor using diamond core drill,” Materials & Design, 40, 461-466 (2012).CrossRef
90.
go back to reference D. Chandramohan and S. Rajesh, “Study of machining parameters on natural fiber particle reinforced polymer composite material,” Academic Journal of Manufacturing Engineering, 12, No. 3, 72-77 (2014). D. Chandramohan and S. Rajesh, “Study of machining parameters on natural fiber particle reinforced polymer composite material,” Academic Journal of Manufacturing Engineering, 12, No. 3, 72-77 (2014).
91.
go back to reference S. Jayabal and U. Natarajan, “Drilling analysis of coir-fibre-reinforced polyester composites,” Bulletin of Materials Science, 34, No. 7, 1563-1567 (2011).CrossRef S. Jayabal and U. Natarajan, “Drilling analysis of coir-fibre-reinforced polyester composites,” Bulletin of Materials Science, 34, No. 7, 1563-1567 (2011).CrossRef
92.
go back to reference H. Rezghi Maleki, M. Hamedi, M. Kubouchi, and Y. Arao, “Experimental study on drilling of jute fiber reinforced polymer composites,” Journal of Composite Materials, 53, No. 3, 283-295 (2019).CrossRef H. Rezghi Maleki, M. Hamedi, M. Kubouchi, and Y. Arao, “Experimental study on drilling of jute fiber reinforced polymer composites,” Journal of Composite Materials, 53, No. 3, 283-295 (2019).CrossRef
93.
go back to reference M. R. Choudhury, M. S. Srinivas, and K. Debnath, “Experimental investigations on drilling of lignocellulosic fiber reinforced composite laminates,” Journal of Manufacturing Processes, 34, 51-61 (2018).CrossRef M. R. Choudhury, M. S. Srinivas, and K. Debnath, “Experimental investigations on drilling of lignocellulosic fiber reinforced composite laminates,” Journal of Manufacturing Processes, 34, 51-61 (2018).CrossRef
94.
go back to reference K. K. Panchagnula and K. Palaniyandi, “Drilling on fiber reinforced polymer/nanopolymer composite laminates: a review,” Journal of Materials Research and Technology, 7, No. 2, 180-189 (2018).CrossRef K. K. Panchagnula and K. Palaniyandi, “Drilling on fiber reinforced polymer/nanopolymer composite laminates: a review,” Journal of Materials Research and Technology, 7, No. 2, 180-189 (2018).CrossRef
95.
go back to reference C. Tsao and Y. Chiu, “Evaluation of drilling parameters on thrust force in drilling carbon fiber reinforced plastic (CFRP) composite laminates using compound core-special drills,” International Journal of Machine Tools and Manufacture, 51, No. 9, 740-744 (2011).CrossRef C. Tsao and Y. Chiu, “Evaluation of drilling parameters on thrust force in drilling carbon fiber reinforced plastic (CFRP) composite laminates using compound core-special drills,” International Journal of Machine Tools and Manufacture, 51, No. 9, 740-744 (2011).CrossRef
96.
go back to reference X. Qiu, P. Li, C. Li, Q. Niu, A. Chen, P. Ouyang, and T. J. Ko, “Study on chisel edge drilling behavior and step drill structure on delamination in drilling CFRP,” Composite Structures, 203, 404-413 (2018).CrossRef X. Qiu, P. Li, C. Li, Q. Niu, A. Chen, P. Ouyang, and T. J. Ko, “Study on chisel edge drilling behavior and step drill structure on delamination in drilling CFRP,” Composite Structures, 203, 404-413 (2018).CrossRef
97.
go back to reference H. Hocheng and C. Tsao, “Comprehensive analysis of delamination in drilling of composite materials with various drill bits,” Journal of Materials Processing Technology, 140, Nos. 1-3, 335-339 (2003).CrossRef H. Hocheng and C. Tsao, “Comprehensive analysis of delamination in drilling of composite materials with various drill bits,” Journal of Materials Processing Technology, 140, Nos. 1-3, 335-339 (2003).CrossRef
98.
go back to reference H. Hocheng and C. Tsao, “Effects of special drill bits on drilling-induced delamination of composite materials,” International Journal of Machine Tools and Manufacture, 46, Nos. 12-13, 1403-1416 (2006).CrossRef H. Hocheng and C. Tsao, “Effects of special drill bits on drilling-induced delamination of composite materials,” International Journal of Machine Tools and Manufacture, 46, Nos. 12-13, 1403-1416 (2006).CrossRef
99.
go back to reference A. Abrao, J. C. Rubio, P. Faria, and J. Davim, “The effect of cutting tool geometry on thrust force and delamination when drilling glass fibre reinforced plastic composite,” Materials & Design, 29, No. 2, 508-513 (2008).CrossRef A. Abrao, J. C. Rubio, P. Faria, and J. Davim, “The effect of cutting tool geometry on thrust force and delamination when drilling glass fibre reinforced plastic composite,” Materials & Design, 29, No. 2, 508-513 (2008).CrossRef
100.
go back to reference A. Krishnamoorthy, S. R. Boopathy, and K. Palanikumar, “Delamination analysis in drilling of CFRP composites using response surface methodology,” Journal of Composite Materials, 43, No. 24, 2885-2902 (2009).CrossRef A. Krishnamoorthy, S. R. Boopathy, and K. Palanikumar, “Delamination analysis in drilling of CFRP composites using response surface methodology,” Journal of Composite Materials, 43, No. 24, 2885-2902 (2009).CrossRef
101.
go back to reference M. Shunmugam and M. Kanthababu, “Advances in unconventional machining and composites,” Proceedings of AIMTDR 2018, Springer Nature (2019). M. Shunmugam and M. Kanthababu, “Advances in unconventional machining and composites,” Proceedings of AIMTDR 2018, Springer Nature (2019).
102.
go back to reference M. Meshreki, A. Sadek, and H. Attia, “High-speed drilling of thick woven carbon fiber reinforced epoxy laminates,” Canadian Aeronautics and Space Journal, 60, No. 3, 90-97 (2014). M. Meshreki, A. Sadek, and H. Attia, “High-speed drilling of thick woven carbon fiber reinforced epoxy laminates,” Canadian Aeronautics and Space Journal, 60, No. 3, 90-97 (2014).
103.
go back to reference M. Mudhukrishnan, P. Hariharan, and K. Palanikumar, “Measurement and analysis of thrust force and delamination in drilling glass fiber reinforced polypropylene composites using different drills,” Measurement, 149, 106973 (2020). M. Mudhukrishnan, P. Hariharan, and K. Palanikumar, “Measurement and analysis of thrust force and delamination in drilling glass fiber reinforced polypropylene composites using different drills,” Measurement, 149, 106973 (2020).
104.
go back to reference N. Z. Karimi, H. Heidary, and G. Minak, “Critical thrust and feed prediction models in drilling of composite laminates,” Composite Structures, 148, 19-26 (2016).CrossRef N. Z. Karimi, H. Heidary, and G. Minak, “Critical thrust and feed prediction models in drilling of composite laminates,” Composite Structures, 148, 19-26 (2016).CrossRef
105.
go back to reference L. Zhang, L. Wang, and X. Liu, “A mechanical model for predicting critical thrust forces in drilling composite laminates,” Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 215, No. 2, 135-146 (2001).CrossRef L. Zhang, L. Wang, and X. Liu, “A mechanical model for predicting critical thrust forces in drilling composite laminates,” Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 215, No. 2, 135-146 (2001).CrossRef
106.
go back to reference L. M. P. Durão, D. J. Gonçalves, J. M. R. Tavares, V. H. C. de Albuquerque, A. A. Vieira, and A. T. Marques, “Drilling tool geometry evaluation for reinforced composite laminates,” Composite Structures, 92, No. 7, 1545-1550 (2010).CrossRef L. M. P. Durão, D. J. Gonçalves, J. M. R. Tavares, V. H. C. de Albuquerque, A. A. Vieira, and A. T. Marques, “Drilling tool geometry evaluation for reinforced composite laminates,” Composite Structures, 92, No. 7, 1545-1550 (2010).CrossRef
107.
go back to reference J. Saoudi, R. Zitoune, S. Gururaja, S. Mezlini, and A. A. Hajjaji, “Prediction of critical thrust force for exit-ply delamination during drilling composite laminates: thermo-mechanical analysis,” International Journal of Machining and Machinability of Materials, 18, Nos. 1-2, 77-98 (2016).CrossRef J. Saoudi, R. Zitoune, S. Gururaja, S. Mezlini, and A. A. Hajjaji, “Prediction of critical thrust force for exit-ply delamination during drilling composite laminates: thermo-mechanical analysis,” International Journal of Machining and Machinability of Materials, 18, Nos. 1-2, 77-98 (2016).CrossRef
108.
go back to reference P. Rahme, Y. Landon, F. Lachaud, R. Piquet, and P. Lagarrigue, “Delamination-free drilling of thick composite materials,” Composites Part A: Applied Science and Manufacturing, 72, 148-159 (2015).CrossRef P. Rahme, Y. Landon, F. Lachaud, R. Piquet, and P. Lagarrigue, “Delamination-free drilling of thick composite materials,” Composites Part A: Applied Science and Manufacturing, 72, 148-159 (2015).CrossRef
Metadata
Title
A Review on Drilling of Fiber-Reinforced Polymer Composites
Authors
A. Mohan Kumar
R. Parameshwaran
R. Rajasekar
C. Moganapriya
R. Manivannan
Publication date
17-03-2022
Publisher
Springer US
Published in
Mechanics of Composite Materials / Issue 1/2022
Print ISSN: 0191-5665
Electronic ISSN: 1573-8922
DOI
https://doi.org/10.1007/s11029-022-10014-5

Other articles of this Issue 1/2022

Mechanics of Composite Materials 1/2022 Go to the issue

Premium Partners