Skip to main content
Top

2017 | OriginalPaper | Chapter

A Review on Status of Research in Metal Additive Manufacturing

Authors : Ganesa Balamurugan Kannan, Dinesh Kumar Rajendran

Published in: Advances in 3D Printing & Additive Manufacturing Technologies

Publisher: Springer Singapore

Activate our intelligent search to find suitable subject content or patents.

search-config
loading …

Abstract

Additive manufacturing is the essential technology in present near net shape manufacturing scenario in the field of aerospace, automobiles, electronics, medical implants, robotics, biomedical, etc., where near net shape manufacturing plays a prominent role in dimensional accuracy. Additive manufacturing has undergone drastic changes from plastics, polymers to metals. Additive manufacturing plays a key role in manufacturing of required components in short span of time without any defect. In this paper, the different research aspects of additive manufacturing are discussed on basis of two broad areas like design for manufacturing and process parameter control. The field of additive manufacturing has brought the manufacturing to next level were it made production and product development easier. An analysis is made on the published research articles and the research gaps were found and finally the future scope in the field of metal additive manufacturing is provided.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

  • über 102.000 Bücher
  • über 537 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Finance + Banking
  • Management + Führung
  • Marketing + Vertrieb
  • Maschinenbau + Werkstoffe
  • Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

  • über 67.000 Bücher
  • über 390 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Maschinenbau + Werkstoffe




 

Jetzt Wissensvorsprung sichern!

Springer Professional "Wirtschaft"

Online-Abonnement

Mit Springer Professional "Wirtschaft" erhalten Sie Zugriff auf:

  • über 67.000 Bücher
  • über 340 Zeitschriften

aus folgenden Fachgebieten:

  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Finance + Banking
  • Management + Führung
  • Marketing + Vertrieb
  • Versicherung + Risiko




Jetzt Wissensvorsprung sichern!

Literature
1.
go back to reference Ponche R, Kerbrat O, Mognol P, vesHascoet J-Y (2014) A novel methodology of design for additive manufacturing applied to additive laser manufacturing process. Robot Comput-Integr Manuf 30:389–398 Ponche R, Kerbrat O, Mognol P, vesHascoet J-Y (2014) A novel methodology of design for additive manufacturing applied to additive laser manufacturing process. Robot Comput-Integr Manuf 30:389–398
2.
go back to reference Adama GAO, Zimmer D (2014) Design for additive manufacturing—element transitions and aggregated structures. CIRP J Manuf Sci Technol 7:20–28 Adama GAO, Zimmer D (2014) Design for additive manufacturing—element transitions and aggregated structures. CIRP J Manuf Sci Technol 7:20–28
3.
go back to reference Klahn C, Leutenecker B, Meboldt M (2014) Design for additive manufacturing—supporting the substitution of components in series products. Procedia CIRP 21:138–143 Klahn C, Leutenecker B, Meboldt M (2014) Design for additive manufacturing—supporting the substitution of components in series products. Procedia CIRP 21:138–143
4.
go back to reference Cooper D, Thornby J, Blundell N, Henrys R, Williams MA, Gibbons G (2015) Design and manufacture of high performance hollow engine valves by additive layer manufacturing. Mater Des 69:44–55 Cooper D, Thornby J, Blundell N, Henrys R, Williams MA, Gibbons G (2015) Design and manufacture of high performance hollow engine valves by additive layer manufacturing. Mater Des 69:44–55
5.
go back to reference Bi G, Sun C-N, Chen H, Lan Ng F, Cho Khin Ma C (2014) Microstructure and tensile properties of superalloy IN100 fabricated by micro-laser aided additive manufacturing. Mater Des 60:401–408 Bi G, Sun C-N, Chen H, Lan Ng F, Cho Khin Ma C (2014) Microstructure and tensile properties of superalloy IN100 fabricated by micro-laser aided additive manufacturing. Mater Des 60:401–408
6.
go back to reference Zhu Y, Li J, Tian X, Wang H, Liu D (2014) Microstructure and mechanical properties of hybrid fabricated Ti–6.5Al–3.5Mo–1.5Zr–0.3Si titanium alloy by laser additive manufacturing. Mater Sci Eng A 607:427–434 Zhu Y, Li J, Tian X, Wang H, Liu D (2014) Microstructure and mechanical properties of hybrid fabricated Ti–6.5Al–3.5Mo–1.5Zr–0.3Si titanium alloy by laser additive manufacturing. Mater Sci Eng A 607:427–434
7.
go back to reference Qian T, Liu D, Tian X, Liu C, Wang H (2014) Microstructure of TA2/TA15 graded structural material by laser additive manufacturing process Trans Nonferrous Met Soc China 24:2729–2736 Qian T, Liu D, Tian X, Liu C, Wang H (2014) Microstructure of TA2/TA15 graded structural material by laser additive manufacturing process Trans Nonferrous Met Soc China 24:2729–2736
8.
go back to reference Li Y, Gu D (2014) Parametric analysis of thermal behavior during selective laser melting additive manufacturing of aluminum alloy powder. Mater Des 63:856–867CrossRef Li Y, Gu D (2014) Parametric analysis of thermal behavior during selective laser melting additive manufacturing of aluminum alloy powder. Mater Des 63:856–867CrossRef
9.
go back to reference Bartkowiaka K, Ullricha S, Frick T, Schmidta M (2011) New developments of laser processing aluminium alloys via additive manufacturing technique. Phys Proc 12:393–401CrossRef Bartkowiaka K, Ullricha S, Frick T, Schmidta M (2011) New developments of laser processing aluminium alloys via additive manufacturing technique. Phys Proc 12:393–401CrossRef
10.
go back to reference Aboulkhair NT, Everitt NM, Ashcroft I, Tuck C (2014) Reducing porosity in AlSi10 Mg parts processed by selective laser melting. Add Manuf 1–4:77–86 Aboulkhair NT, Everitt NM, Ashcroft I, Tuck C (2014) Reducing porosity in AlSi10 Mg parts processed by selective laser melting. Add Manuf 1–4:77–86
Metadata
Title
A Review on Status of Research in Metal Additive Manufacturing
Authors
Ganesa Balamurugan Kannan
Dinesh Kumar Rajendran
Copyright Year
2017
Publisher
Springer Singapore
DOI
https://doi.org/10.1007/978-981-10-0812-2_8

Premium Partners