Top

Published in:

2020 | OriginalPaper | Chapter

A Review on the Recent Development of Ambient Cured Geopolymer Composites

Authors : Mayank Gupta, N. H. Kulkarni

Published in: International Conference on Emerging Trends in Engineering (ICETE)

Publisher: Springer International Publishing

Activate our intelligent search to find suitable subject content or patents.

search-config

AI-assisted search

Off

Abstract

Geopolymer composite is synthesized with aggregates and industrial by-products materials those are thriving in alumina and silica, energized using a powerful alkali solution. Geopolymer composites required high temperature curing for achieving higher strength which restricted the use in cast-in-situ work. This literature provides a condensed explanation on the recent development of the ambient cured Geopolymer composites. It has been observed that geopolymer composites contributed better physical properties viz. workability and mechanical parameters viz. compressive, split tensile and flexural strength along with the superior durability properties like sulfate and acid resistance, resistance to freezing and thawing, shrinkage, corrosion and water absorptions etc. compared to the cement composites in the ambient cured condition and also reduces the greenhouse gas production. In general, production of high strength geopolymer composites in the ambient cured condition requires concentration of sodium hydroxide 10–12 Molarity, alkali to binder ratio 0.35–0.5 and the ratio between sodium silicate and sodium hydroxides 1.5–2.5.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

inform now

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

inform now

previous chapter Earthquake Analysis of High-Rise Building with Floating Column

next chapter A Case Study on Structural Assessment of Dudhgaon Grampanchayat Building by Using Non Destructive Testing

Shafigh P, Mahmud HB, Jumaat MZ, Zargar M (2014) Agricultural wastes as aggregate in concrete mixtures - a review. Constr Build Mater 53:110–117. https://doi.org/10.1016/j.conbuildmat.2013.11.074CrossRef

Mehta A, Siddique R (2016) An overview of geopolymers derived from industrial by-products. Constr Build Mater 127:183–198. https://doi.org/10.1016/j.conbuildmat.2016.09.136CrossRef

Hardjito D, Wallah SE, Sumajouw DMJ, Rangan BV (2015) On the development of fly ash-based geopolymer concrete 467–472

Davidovits J (1999) Chemistry of geopolymeric systems, terminology. In: 99 International Conference, France, pp 9–40

Turner LK, Collins FG (2013) Carbon dioxide equivalent (CO2-e) emissions: a comparison between geopolymer and OPC cement concrete. Constr Build Mater 43:125–130. https://doi.org/10.1016/j.conbuildmat.2013.01.023CrossRef

Islam A, Alengaram UJ, Jumaat MZ, Bashar II, Kabir SMA (2015) Engineering properties and carbon footprint of ground granulated blast-furnace slag-palm oil fuel ash-based structural geopolymer concrete. Constr Build Mater 101:503–521. https://doi.org/10.1016/j.conbuildmat.2015.10.026CrossRef

Ng C, Alengaram UJ, Wong LS, Mo KH, Jumaat MZ, Ramesh S (2018) A review on microstructural study and compressive strength of geopolymer mortar, paste and concrete. Constr Build Mater 186:550–576. https://doi.org/10.1016/j.conbuildmat.2018.07.075CrossRef

Mehta A, Siddique R (2017) Properties of low-calcium fly ash based geopolymer concrete incorporating OPC as partial replacement of fly ash. Constr Build Mater 150:792–807. https://doi.org/10.1016/j.conbuildmat.2017.06.067CrossRef

Olivia M, Nikraz H (2012) Properties of fly ash geopolymer concrete designed by Taguchi method. Mater Des 36:191–198. https://doi.org/10.1016/j.matdes.2011.10.036CrossRef

10.

Albitar M, Ali MSM, Visintin P, Drechsler M (2017) Durability evaluation of geopolymer and conventional concretes. Constr Build Mater 136:374–385. https://doi.org/10.1016/j.conbuildmat.2017.01.056CrossRef

11.

Saha S, Rajasekaran C (2017) Enhancement of the properties of fly ash based geopolymer paste by incorporating ground granulated blast furnace slag. Constr Build Mater 146:615–620. https://doi.org/10.1016/j.conbuildmat.2017.04.139CrossRef

12.

Nath P, Sarker PK (2015) Use of OPC to improve setting and early strength properties of low calcium fly ash geopolymer concrete cured at room temperature. Cem Concr Compos 55:205–214. https://doi.org/10.1016/j.cemconcomp.2014.08.008CrossRef

13.

Dep PS, Nath P, Sarker K (2014) The effects of ground granulated blast-furnace slag blending with fly ash and activator content on the workability and strength properties of geopolymer concrete cured at ambient temperature. J Mater 62:32–39. https://doi.org/10.1016/j.matdes.2014.05.001CrossRef

14.

Suwan T, Fan M (2014) Influence of OPC replacement and manufacturing procedures on the properties of self-cured geopolymer. Constr Build Mater 73:551–561. https://doi.org/10.1016/j.conbuildmat.2014.09.065CrossRef

15.

Atiş CD, Görür EB, Karahan O, Bilim C, Ilkentapar S, Luga E (2015) Very high strength (120 MPa) class F fly ash geopolymer mortar activated at different NaOH amount, heat curing temperature and heat curing duration. Constr Build Mater 96:673–678. https://doi.org/10.1016/j.conbuildmat.2015.08.089CrossRef

16.

Albitar M, Ali MSM, Visintin P (2017) Experimental study on fly ash and lead smelter slag-based geopolymer concrete columns. Constr Build Mater 141:104–112. https://doi.org/10.1016/j.conbuildmat.2017.03.014CrossRef

17.

Abdulkareem OA, Al Bakri AMM, Kamarudin H, Nizar IK, Ala’eddin AS (2014) Effects of elevated temperatures on the thermal behavior and mechanical performance of fly ash geopolymer paste, mortar and lightweight concrete. Constr Build Mater 50:377–387. https://doi.org/10.1016/j.conbuildmat.2013.09.047CrossRef

18.

Joseph B, Mathew G (2012) Influence of aggregate content on the behavior of fly ash based geopolymer concrete. Sci Iran 19:1188–1194. https://doi.org/10.1016/j.scient.2012.07.006CrossRef

19.

Hadi MNS, Farhan NA, Sheikh MN (2017) Design of geopolymer concrete with GGBFS at ambient curing condition using Taguchi method. Constr Build Mater 140:424–431. https://doi.org/10.1016/j.conbuildmat.2017.02.131CrossRef

20.

Boonserm K, Sata V, Pimraksa K, Chindaprasirt P (2012) Improved geopolymerization of bottom ash by incorporating fly ash and using waste gypsum as additive. Cem Concr Compos 34:819–824. https://doi.org/10.1016/j.cemconcomp.2012.04.001CrossRef

21.

Ahmari S, Zhang L (2013) Utilization of cement kiln dust (CKD) to enhance mine tailings-based geopolymer bricks. Constr Build Mater 40:1002–1011. https://doi.org/10.1016/j.conbuildmat.2012.11.069CrossRef

22.

Adak D, Sarkar M, Mandal S (2014) Effect of nano-silica on strength and durability of fly ash based geopolymer mortar. Constr Build Mater 70:453–459. https://doi.org/10.1016/j.conbuildmat.2014.07.093CrossRef

23.

Ash RH, Patel YJ, Shah N (2018) Enhancement of the properties of ground granulated blast furnace slag based self compacting geopolymer concrete by incorporating. Constr Build Mater 171:654–662. https://doi.org/10.1016/j.conbuildmat.2018.03.166CrossRef

24.

Sun Z, Lin X, Vollpracht A (2018) Pervious concrete made of alkali activated slag and geopolymers. Constr Build Mater 189:797–803. https://doi.org/10.1016/j.conbuildmat.2018.09.067CrossRef

25.

Alanazi H, Hu J, Kim Y (2019) Effect of slag, silica fume, and metakaolin on properties and performance of alkali-activated fly ash cured at ambient temperature. Constr Build Mater 197:747–756. https://doi.org/10.1016/j.conbuildmat.2018.11.172CrossRef

26.

Parveen, Singhal D, Junaid MT, Jindal BB, Mehta A (2018) Mechanical and microstructural properties of fly ash based geopolymer concrete incorporating alccofine at ambient curing. Constr Build Mater 180:298–307. https://doi.org/10.1016/j.conbuildmat.2018.05.286CrossRef

27.

Patel YJ, Shah N (2018) Study on workability and hardened properties of self compacted GEOPOLYMER concrete cured at ambient temperature. 11:1–12. https://doi.org/10.17485/ijst/2018/v11i1/117698

28.

Venu Madhav T, Ramana Reddy IV, Ghorpade VG, Jyothirmai S (2018) Compressivestrength study of geopolymer mortar using quarry rock dust. Mater Lett 231:105–108. https://doi.org/10.1016/j.matlet.2018.07.133CrossRef

29.

Fang G, Ho WK, Tu W, Zhang M (2018) Workability and mechanical properties of alkali-activated fly ash-slag concrete cured at ambient temperature. Constr Build Mater 172:476–487. https://doi.org/10.1016/j.conbuildmat.2018.04.008CrossRef

30.

Askarian M, Tao Z, Adam G, Samali B (2018) Mechanical properties of ambient cured one-part hybrid OPC-geopolymer concrete 186:330–337

31.

Cao Y, Tao Z, Pan Z, Wuhrer R (2018) Effect of calcium aluminate cement on geopolymer concrete cured at ambient temperature. Constr Build Mater 191:242–252. https://doi.org/10.1016/j.conbuildmat.2018.09.204CrossRef

32.

Nath P, Sarker PK (2017) Flexural strength and elastic modulus of ambient-cured blended low-calcium fly ash geopolymer concrete. 130:22–31

33.

Babu DV (2018) Assessing the performance of molarity and alkaline activator ratio on engineering properties of self-compacting alkaline activated concrete at ambient temperature. J Build Eng 20:137–155. https://doi.org/10.1016/j.jobe.2018.07.005CrossRef

34.

Rodrigue A, Duchesne J, Fournier B, Bissonnette B (2018) Influence of added water and fly ash content on the characteristics, properties and early-age cracking sensitivity of alkali-activated slag/fly ash concrete cured at ambient temperature. 171:929–941

35.

Reddy MS, Dinakar P, Rao BH (2018) Mix design development of fl y ash and ground granulated blast furnace slag based geopolymer concrete. J. Build. Eng. 20:712–722. https://doi.org/10.1016/j.jobe.2018.09.010CrossRef

36.

Karthik A, Sudalaimani K, Vijayakumar CT (2017) Durability study on coal fly ash-blast furnace slag geopolymer concretes with bio-additives. Ceram Int 43:11935–11943. https://doi.org/10.1016/j.ceramint.2017.06.042CrossRef

37.

Karthik A, Sudalaimani K, Vijayakumar CT, Saravanakumar SS (2019) Effect of bio-additives on physico-chemical properties of fly ash-ground granulated blast furnace slag based self cured geopolymer mortars. 361:56–63

38.

Albitar M, Ali MM, Visintin P (2017) Experimental study on fly ash and lead smelter slag-based geopolymer concrete columns. 141:104–112

39.

Farhan NA, Sheikh MN, Hadi MNS (2018) Behaviour of ambient cured steel fibre reinforced geopolymer concrete columns under axial and flexural loads. Structures 15:184–195. https://doi.org/10.1016/j.istruc.2018.07.001CrossRef

Title: A Review on the Recent Development of Ambient Cured Geopolymer Composites
Authors: Mayank Gupta
N. H. Kulkarni
Publisher: Springer International Publishing
Book: International Conference on Emerging Trends in Engineering (ICETE)
Print ISBN: 978-3-030-24313-5

Electronic ISBN: 978-3-030-24314-2

Copyright Year: 2020
DOI: https://doi.org/10.1007/978-3-030-24314-2_24

Springer Professional

Abstract

Please log in to get access to your license.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Premium Partners