Skip to main content
Top
Published in: Journal of Materials Engineering and Performance 2/2017

22-12-2016

A Study on Deformation Behavior of 304L Stainless Steel During and After Plate Rolling at Elevated Temperatures

Authors: P. Pourabdollah, S. Serajzadeh

Published in: Journal of Materials Engineering and Performance | Issue 2/2017

Log in

Activate our intelligent search to find suitable subject content or patents.

search-config
loading …

Abstract

In this work, microstructural evolutions and mechanical properties of AISI 304L stainless steel were studied after rolling operations at elevated temperatures. Rolling experiments were conducted under warm and hot rolling conditions in the range of 600-1000 °C employing different reductions. Then, the developed microstructures and the mechanical properties of the steel were evaluated by means of uniaxial tensile testing, metallographic observations, and x-ray diffraction method. Besides, two-dimensional finite element analysis coupled with artificial neural network modeling was developed to assess thermo-mechanical behavior of the steel during and after rolling. The results show that inhomogeneities in strain and temperature distributions are reduced under warm rolling conditions. Static recrystallization can be operative under hot rolling conditions and relatively low reduction, i.e., reduction of 25%. However, for the case of higher reductions, the rate of recrystallization decreases considerably owing to severe temperature drop in the plate being rolled. Furthermore, the rolled plates show negative strain rate sensitivity while this phenomenon is affected by the rolling temperature.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

  • über 102.000 Bücher
  • über 537 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Finance + Banking
  • Management + Führung
  • Marketing + Vertrieb
  • Maschinenbau + Werkstoffe
  • Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

  • über 67.000 Bücher
  • über 390 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Maschinenbau + Werkstoffe




 

Jetzt Wissensvorsprung sichern!

Literature
1.
go back to reference W.L. Roberts, Hot Rolling of Steels, Marcel Dekker Inc., New York, 1983 W.L. Roberts, Hot Rolling of Steels, Marcel Dekker Inc., New York, 1983
2.
go back to reference S.L. Semiatin and J.H. Holbrook, Plastic Flow Phenomenology of 304L Stainless Steel, Metall. Trans. A, 1983, 14, p 1681–1695CrossRef S.L. Semiatin and J.H. Holbrook, Plastic Flow Phenomenology of 304L Stainless Steel, Metall. Trans. A, 1983, 14, p 1681–1695CrossRef
3.
go back to reference P. Dadras, Flow Stress Equations for Type 304 Stainless and AISI, 1055 Steel, ASME Trans. J. Eng. Mater. Technol., 1055, 107(1985), p 97–100 P. Dadras, Flow Stress Equations for Type 304 Stainless and AISI, 1055 Steel, ASME Trans. J. Eng. Mater. Technol., 1055, 107(1985), p 97–100
4.
go back to reference H.J. McQueen, S. Yue, N.D. Ryan, and E. Fry, Hot Working Characteristics of Steels in Austenitic State, Mater. Sci. Eng., 1995, 83, p 293–310 H.J. McQueen, S. Yue, N.D. Ryan, and E. Fry, Hot Working Characteristics of Steels in Austenitic State, Mater. Sci. Eng., 1995, 83, p 293–310
5.
go back to reference M. El Wahabi, J.M. Cabrera, and J.M. Prado, Hot Working of Two AISI, 304 Steels: A Comparative Study, Mater. Sci. Eng. A, 2003, 343, p 116–125CrossRef M. El Wahabi, J.M. Cabrera, and J.M. Prado, Hot Working of Two AISI, 304 Steels: A Comparative Study, Mater. Sci. Eng. A, 2003, 343, p 116–125CrossRef
6.
go back to reference K.J.R. Rasmussen, T. Burns, P. Bezkorovainy, and M.R. Bambach, Numerical Modelling of Stainless Steel Plates in Compression, J. Constr. Steel Res., 2003, 59, p 1345–1362CrossRef K.J.R. Rasmussen, T. Burns, P. Bezkorovainy, and M.R. Bambach, Numerical Modelling of Stainless Steel Plates in Compression, J. Constr. Steel Res., 2003, 59, p 1345–1362CrossRef
7.
go back to reference D. Samantaray, S. Mandal, C. Phaniraj, and A.K. Bhaduri, Flow Behavior and Microstructural Evolution During Hot Deformation of AISI, Type 316 L(N) Austenitic Stainless Steel, Mater. Sci. Eng. A, 2011, 528, p 8565–8572CrossRef D. Samantaray, S. Mandal, C. Phaniraj, and A.K. Bhaduri, Flow Behavior and Microstructural Evolution During Hot Deformation of AISI, Type 316 L(N) Austenitic Stainless Steel, Mater. Sci. Eng. A, 2011, 528, p 8565–8572CrossRef
8.
go back to reference G.Q. Hou and L. Zhu, Influence of Strain Rate on Hot Ductility of Austenitic Stainless Steel Slab, Mater. Sci. Technol., 2013, 29, p 568–572CrossRef G.Q. Hou and L. Zhu, Influence of Strain Rate on Hot Ductility of Austenitic Stainless Steel Slab, Mater. Sci. Technol., 2013, 29, p 568–572CrossRef
9.
go back to reference A.J. McLaren and C.M. Sellars, Modelling Distribution of Microstructure During Hot Rolling of Stainless Steel, Mater. Sci. Technol., 1992, 8, p 1090–1094CrossRef A.J. McLaren and C.M. Sellars, Modelling Distribution of Microstructure During Hot Rolling of Stainless Steel, Mater. Sci. Technol., 1992, 8, p 1090–1094CrossRef
10.
go back to reference S. Venugopal, S. Venugopal, P.V. Sivaprasad, M. Vasudevan, S.L. Mannan, S.K. Jha, P. Pandey, and Y.V.R.K. Prasad, Validation of Processing Maps for 304L Stainless Steel Using Hot Forging, Rolling and Extrusion, J. Mater. Process. Technol., 1995, 59, p 343–350CrossRef S. Venugopal, S. Venugopal, P.V. Sivaprasad, M. Vasudevan, S.L. Mannan, S.K. Jha, P. Pandey, and Y.V.R.K. Prasad, Validation of Processing Maps for 304L Stainless Steel Using Hot Forging, Rolling and Extrusion, J. Mater. Process. Technol., 1995, 59, p 343–350CrossRef
11.
go back to reference S. Cho and Y. Loo, Hot Rolling Simulations of Austenitic Stainless Steel, J. Mater. Sci, 2001, 36, p 4267–4272CrossRef S. Cho and Y. Loo, Hot Rolling Simulations of Austenitic Stainless Steel, J. Mater. Sci, 2001, 36, p 4267–4272CrossRef
12.
go back to reference A. Di Schino, J.M. Kenny, I. Salvatori, and G. Abbruzzese, Modelling Primary Recrystallization and Grain Growth in a Low Nickel Austenitic Stainless Steel, J. Mater. Sci., 2001, 36, p 593–601CrossRef A. Di Schino, J.M. Kenny, I. Salvatori, and G. Abbruzzese, Modelling Primary Recrystallization and Grain Growth in a Low Nickel Austenitic Stainless Steel, J. Mater. Sci., 2001, 36, p 593–601CrossRef
13.
go back to reference S. Kim, Y. Lee, and B. Jang, Modeling of Recrystallization and Austenite Grain Size for AISI, 316 Stainless Steel and Its Application to Hot Bar Rolling, Mater. Sci. Eng. A, 2003, 357, p 235–239CrossRef S. Kim, Y. Lee, and B. Jang, Modeling of Recrystallization and Austenite Grain Size for AISI, 316 Stainless Steel and Its Application to Hot Bar Rolling, Mater. Sci. Eng. A, 2003, 357, p 235–239CrossRef
14.
go back to reference A. Belyakov, T. Sakai, and H. Miura, Grain Refinement in a 304 Stainless Steel Caused by Multiple Deformation at 0.5Tm, ISIJ Int., 2000, 40(Supplement), p SI64–SI68 A. Belyakov, T. Sakai, and H. Miura, Grain Refinement in a 304 Stainless Steel Caused by Multiple Deformation at 0.5Tm, ISIJ Int., 2000, 40(Supplement), p SI64–SI68
15.
go back to reference R.L. Higginson and C.M. Sellars, The Effect of Strain Path Reversal During Hot Rolling on Austenitic Stainless Steel, Mater. Sci. Eng. A, 2002, 338, p 323–330CrossRef R.L. Higginson and C.M. Sellars, The Effect of Strain Path Reversal During Hot Rolling on Austenitic Stainless Steel, Mater. Sci. Eng. A, 2002, 338, p 323–330CrossRef
16.
go back to reference S. Frechard, A. Redjaimia, E. Lach, and A. Lichtenberger, Mechanical Behavior of Nitrogen-Alloyed Austenitic Stainless Steel Hardened by Warm Rolling, Mater. Sci. Eng. A, 2006, 415, p 219–224CrossRef S. Frechard, A. Redjaimia, E. Lach, and A. Lichtenberger, Mechanical Behavior of Nitrogen-Alloyed Austenitic Stainless Steel Hardened by Warm Rolling, Mater. Sci. Eng. A, 2006, 415, p 219–224CrossRef
17.
go back to reference M. Tikhonova, V. Dudko, A. Belyakov, and R. Kaibyshev, The Formation of Fine-Grained Structure in S304H-Type Austenitic Stainless Steel During Hot-to-Warm Working, Mater. Sci. Forum., 2012, 715–716, p 380–385CrossRef M. Tikhonova, V. Dudko, A. Belyakov, and R. Kaibyshev, The Formation of Fine-Grained Structure in S304H-Type Austenitic Stainless Steel During Hot-to-Warm Working, Mater. Sci. Forum., 2012, 715–716, p 380–385CrossRef
18.
go back to reference A.F. Padilha and P.R. Rios, Decomposition of Austenite in Austenitic Stainless Steel, ISIJ Int., 2002, 42, p 325–337CrossRef A.F. Padilha and P.R. Rios, Decomposition of Austenite in Austenitic Stainless Steel, ISIJ Int., 2002, 42, p 325–337CrossRef
19.
go back to reference A.K. De, J.G. Speer, D.K. Matlock, D.C. Murdock, M.C. Mataya, and R.J. Comstock, Jr., Deformation-Induced Phase Transformation and Strain Hardening in Type 304 Austenitic Stainless Steel, Metall. Mater. Trans. A, 2006, 37, p 1875–1896CrossRef A.K. De, J.G. Speer, D.K. Matlock, D.C. Murdock, M.C. Mataya, and R.J. Comstock, Jr., Deformation-Induced Phase Transformation and Strain Hardening in Type 304 Austenitic Stainless Steel, Metall. Mater. Trans. A, 2006, 37, p 1875–1896CrossRef
20.
go back to reference S. Kobayashi, S. Oh, T. Altan, Metal Forming and the Finite Element Method, Oxford University Press, Oxford, 1989, Chapters 6–7. S. Kobayashi, S. Oh, T. Altan, Metal Forming and the Finite Element Method, Oxford University Press, Oxford, 1989, Chapters 6–7.
21.
go back to reference P. Tong and N. Rossettos, Finite Element Method: Basic Technique and Implementation, MIT Press, Cambridge, 1977 P. Tong and N. Rossettos, Finite Element Method: Basic Technique and Implementation, MIT Press, Cambridge, 1977
22.
go back to reference J.G. Lenard, M. Pietrzyk, and L. Cser, Mathematical Physical Simulation, of the Properties of Hot Rolled Products, Elsevier, New York, 1999 (Chapter 5) J.G. Lenard, M. Pietrzyk, and L. Cser, Mathematical Physical Simulation, of the Properties of Hot Rolled Products, Elsevier, New York, 1999 (Chapter 5)
23.
go back to reference R.M. Golden, Mathematical Methods for Neural Network Analysis and Design, MIT Press, Cambridge, 1996 R.M. Golden, Mathematical Methods for Neural Network Analysis and Design, MIT Press, Cambridge, 1996
24.
go back to reference Y.C. Lin, J. Zhang, and J. Zhong, Application of Neural Networks to Predict the Elevated Temperature Flow Behavior of a Low Alloy Steel, Comput. Mater. Sci., 2008, 43, p 752–758CrossRef Y.C. Lin, J. Zhang, and J. Zhong, Application of Neural Networks to Predict the Elevated Temperature Flow Behavior of a Low Alloy Steel, Comput. Mater. Sci., 2008, 43, p 752–758CrossRef
25.
go back to reference K.H. Huebner and E.A. Thornton, The Finite Element Method for Engineers, 2nd ed., Wiley, New York, 1982 K.H. Huebner and E.A. Thornton, The Finite Element Method for Engineers, 2nd ed., Wiley, New York, 1982
26.
go back to reference S.J. Chen and A.A. Tseng, Spray and Jet Cooling in Steel Rolling, Int. J. Heat Fluid Flow, 1992, 13, p 358–369CrossRef S.J. Chen and A.A. Tseng, Spray and Jet Cooling in Steel Rolling, Int. J. Heat Fluid Flow, 1992, 13, p 358–369CrossRef
27.
go back to reference Y. Prasad and S. Sasidhara, Hot Working Guide: A Compendium of Processing Maps, ASM International, Materials Park, 1997 Y. Prasad and S. Sasidhara, Hot Working Guide: A Compendium of Processing Maps, ASM International, Materials Park, 1997
28.
go back to reference Y.F. Shen, X.X. Li, X. Sun, Y.D. Wang, and L. Zuo, Twinning and Martensite in a 304 Austenitic Stainless Steel, Mater. Sci. Eng. A, 2012, 552, p 514–522CrossRef Y.F. Shen, X.X. Li, X. Sun, Y.D. Wang, and L. Zuo, Twinning and Martensite in a 304 Austenitic Stainless Steel, Mater. Sci. Eng. A, 2012, 552, p 514–522CrossRef
29.
go back to reference J. Talonen, P. Nenonen, G. Pape, and H. Hanninen, Effect of Strain Rate on the Strain-Induced-Martensite Transformation and Mechanical Properties Of Austenitic Stainless Steels, Metall. Mater. Trans., 2005, 36, p 421–432CrossRef J. Talonen, P. Nenonen, G. Pape, and H. Hanninen, Effect of Strain Rate on the Strain-Induced-Martensite Transformation and Mechanical Properties Of Austenitic Stainless Steels, Metall. Mater. Trans., 2005, 36, p 421–432CrossRef
30.
go back to reference H.C. Shin, T.K. Ha, and Y.W. Chang, Kinetics of Deformation Induced Martensitic Transformation in a 304 Stainless Steel, Scripta Mater., 2001, 45, p 823–829CrossRef H.C. Shin, T.K. Ha, and Y.W. Chang, Kinetics of Deformation Induced Martensitic Transformation in a 304 Stainless Steel, Scripta Mater., 2001, 45, p 823–829CrossRef
31.
go back to reference G.E. Dieter, H.A. Kuhn, and S.L. Semiatin, Ed., Handbook of Workability and Process Design, ASM International, Materials Park, 2003 G.E. Dieter, H.A. Kuhn, and S.L. Semiatin, Ed., Handbook of Workability and Process Design, ASM International, Materials Park, 2003
Metadata
Title
A Study on Deformation Behavior of 304L Stainless Steel During and After Plate Rolling at Elevated Temperatures
Authors
P. Pourabdollah
S. Serajzadeh
Publication date
22-12-2016
Publisher
Springer US
Published in
Journal of Materials Engineering and Performance / Issue 2/2017
Print ISSN: 1059-9495
Electronic ISSN: 1544-1024
DOI
https://doi.org/10.1007/s11665-016-2475-8

Other articles of this Issue 2/2017

Journal of Materials Engineering and Performance 2/2017 Go to the issue

Premium Partners