Top

Wireless Personal Communications

Published in:

15-10-2016

A Wireless On-line Temperature Monitoring System for Rotating Electrical Machine

Authors: Sonia Ben Brahim, Ridha Bouallegue, Jacques David, Tan Hoa Vuong, Maria David

Published in: Wireless Personal Communications | Issue 2/2017

Activate our intelligent search to find suitable subject content or patents.

search-config

AI-assisted search

Off

Abstract

Wireless communication can be a useful method to monitor the electrical machine as it provides the main characteristics of online signal processing. Our contribution in this current paper consists in studying a new system to monitor the rotating electrical machines based on wireless communication. The main objective of this system is to detect the temperature value of the squirrel cage induction machine’s rotor, using the IEEE 802.11 protocol. However, the application of wireless communication inside the rotating electrical machines is not self-evident due to the fact that the electromagnetic compatibility problems between devices isn’t obviously guaranteed. So, in order to obtain a good reliability for wireless communication, the study of the electromagnetic field inside rotating electrical machine is essential. As a first step in this paper, we are going to focus mainly on the flux effect of the rotating electrical machine through the finite element method which offers so much information on the phenomena characterizing the electrical machine operation. This method proves that the high frequency domain transmitter won’t be disturbed by the low frequency existing flux inside the machine. As a second step in this study, the proposed network system design is presented. Then, the communication protocol, the hardware design based on the transmitting chip Roving Networks (RN-171) as well as the software design are illustrated. Finally, the experimental results of the proposed system are investigated to validate its feasibility.

previous article Efficient Lattice Reduction Aided Detectors Under Realistic MIMO Channels

next article Design and Performance Evaluation of Metamaterial Inspired MIMO Antennas for Wireless Applications

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

inform now

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

inform now

Springer Professional "Wirtschaft"

Online-Abonnement

Mit Springer Professional "Wirtschaft" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 340 Zeitschriften

aus folgenden Fachgebieten:

Bauwesen + Immobilien
Business IT + Informatik
Finance + Banking
Management + Führung
Marketing + Vertrieb
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

inform now

Hubert, C. I. (1991). Electric machines: Theory, operational, applications, adjustment, and control. New York: Macmillan Publishing Company.

Habetler, T. G., Harley, R. G., Tallam, R. M., Lee, S. B., Obaid, R., & Stack, J. (2002). Complete current-based induction motor condition monitoring: Stator, rotor, bearings, and load. In 8th IEEE international power electronics congress CIEP.

Tavner, P. J. (2008). Reviw of condition monitoring of rotating electrical machines. The Institution of Engineering and Technology (IET) in Electric Power Applications, 2(4), 215–247.CrossRef

Khalid, A., & Nawaz, A. (2014). Sensor less control of DC motor using Kalman filter for low cost CNC machine. In The first international conference on robotics and emerging allied technologies in engineering (iCREATE), Islamabad.

Tashakori, A., & Ektesabi, M. (2013). A simple fault tolerant control system for hall effect sensors failure of BLDC motor. In 8th IEEE conference on industrial electronics and applications (ICIEA).

Mahulkar, V., McKay, S., Adams, D. E., & Chaturvedi, A. R. (2009). System-of-systems modeling and simulation of a ship environment with wireless and intelligent maintenance technologies. IEEE Transaction on Systems, Man and Cybernetics, Part A, Systems and Humans, 39(6), 1255–1270.CrossRef

Larios, D., Barbancho, J., Rodriguez, G., Sevillano, J. L., Molina, F. J., & Leon, C. (2012). Energy efficient wireless sensor network communications based on computational intelligent data fusion for environmental monitoring. The Institution of Engineering and Technology (IET) in Communications, 6(14), 2189–2197.

Yang, Y., Marina, M., & Bagrodia, R. (2006). Experimental evaluation of application performance with 802.11 PHY rate adaptation mechanisms in diverse environments. In International conference on wireless communication and networking conferece (WCNC).

Ganchev, M., Umschaden, H., & Kappeler, H. (2011). Rotor temperature distribution measuring system. In 37th Annual conference on IEEE Industrial Electronics Society (IECON).

10.

Pande, D. C. (1999). Electromagnetic compatibility problems in mobile communication systems. In International conference on electromagnetic interference and compatibility.

11.

Leng, Y., Dong, W., Peng, S., Ge, X., Nga, G. J., & Sheng, L. (2012). Study on electromagnetic wave propagation characteristics in rotating environments and its application in tire pressure monitoring. IEEE Transaction on Instrumentation and Measurement, 61(6), 1765–1777.CrossRef

12.

Ben Brahim, S., Bouallegue R., David J., & Vuong, T. H. (2015). Wireless communication to monitor the rotating electrical machines. In 23rd International conference on Software Telecommunications and Computer Networks (SoftCOM).

13.

Ben Brahim, S., Vuong, T. H., David, J., Bouallegue, R., & David, M. (2015). Feasibility study of wireless communication for the double fed inductin machine. In 12th International conference on fuzzy systems and knowledge discovery (FSKD).

14.

Aileen, J., Nagarajan, S., & Rama Reddy, S. (2011). Detection of broken bars in three phase squirrel cage induction motor using finite element method. In International conference on emrging trends in electrical and computer technology (ICETECT).

15.

Zaabi, W., Bensalem, Y., & Trabelsi, H. (2014). Fault analysis of induction machine using Finite Element Method (FEM). In 15th International conference on sciences and techniques of automatic control and computer engineering (STA).

16.

Daviu, J. A., Rodriguez, P. J., Guasp, M. R., Sanchez, M. P., & Arkkio, A. (2009). Detection of combined faults in induction machines with stator parallel branches through the DWT on the startup current. Elsevier on Mechanical Systems and Signal Processing, 23(7), 2336–2351.CrossRef

17.

Riera, G. M., Antonino, D. J. A., Pineda, S. M., Puche, P. R., & Perez, C. J. (2008). A general approach for the transient detection of slip-dependent fault components based on the discrete wavelet transform. IEEE Transactions on Industrial Electronics, 55(12), 4167–4180.CrossRef

18.

Salah, M., Bacha, K., & Chaari, A. (2013). Stator current analysis of a squirrel cage motor running under mechanical unbalance condition. In 10th International conference on systems, signals and devices (SSD).

19.

Gomez, F. A. J., Sobczyk, T. J., & Weinreb, K. (2015). Influence on rotor broken bar fault diagnosis of mechanical torque pulsations by means of FFT. In 10th International symposium on diagnostics for electrical machines, power electronics and drives (SDEMPED).

20.

Cupertino, F., Vanna, E., Salvatore, L., & Stasi, S. (2004). Analysis techniques for detection of Induction Motor broken rotor bars after supply disconnection. IEEE Transactions on Industry Applications, 40(2), 526–533.CrossRef

21.

Korkua, S. K., & Lee, W. J. (2009). Wireless sensor network for performance monitoring of electrical machine. In ON north american power symposium (NAPS).

22.

Omar, M. Q., Widad, I., Mokhtar, M., Inzarulfaisham, A. R., & Miskam, M. A. (2013). Embedded active RFID with WSN for machine condition monitoring. In IEEE conference on wireless sensor (ICWISE).

23.

Brzeska, M., Pontes, J., Chakam, G. A., & Wiesbeck, W. (2007). RF Design characterization and modeling of tire pressure sensors. In The second European conference on antennas and propagation.

24.

Cheikh, M., David, J., Tartarin, J. G., Kessler, S., & Morin, A. (2009). RF source characterization of Tire Pressure Monitorng System. In European conference on wireless technology (EuWIT).

25.

Tartarin, J. G., Cheikh, M., Kessler, S., Morin, A., & David, J. (2010). Efficient time diversity evaluation for direct tire pressure monitoring system. In 71st Conference on vehicular technology(VTC-Spring).

26.

Zaabi, W., Bensalem, Y., & Trabelsi, H. (2015). Analysis of induction motor with stator winding short-circuit fault by finite element model. International Journal of Scientific Research and Engineering Technology, 3(3), 53–58.

27.

Sprooten, J., & Maun, J. C. (2009). Influence of saturation level on the effect of broken bars in induction motors using fundamental electromagnetic laws and finite element simulations. IEEE Transactions on Energy Conversion, 24(3), 557–564.CrossRef

28.

Microchip. RN-171 Data Sheet (2014).

29.

Microchip. RN-171-EK Data Sheet (2014).

30.

Liu, C., Ren, W., Zhang, B., & Lv, C. (2011). The application of soil temperature measurement by lm35 temperature sensors. In International conference on electronic and mechanical engineering and information technology (EMEIT).

31.

Villegas, E. G. (2009). Self-optimization of radio resources on IEEE 802.11 networks. Thesis in Telematics Department Universitat Politecnica de Catalunya (UPC).

32.

Microchip. (2014). WiFly command reference, advanced features and applications.

33.

Ben Brahim, S., Bouallegue, R., David, J., & Vuong, T. H. (2015). Electromagnetic wave propagation characteristics of rotating antenna in electrical machine. In 11th International conference on wireless communication and mobile computing (WiCOM).

34.

Ben Brahim, S., Bouallegue, R., David, J., Vuong, T. H., & David, M. (2016). Design and implementation of wireless sensor network node for rotating electrical machine. In The twenty-first IEEE symposium on computers and communications (ISCC).

Title: A Wireless On-line Temperature Monitoring System for Rotating Electrical Machine
Authors: Sonia Ben Brahim
Ridha Bouallegue
Jacques David
Tan Hoa Vuong
Maria David
Publication date: 15-10-2016
Publisher: Springer US
Published in: Wireless Personal Communications / Issue 2/2017
Print ISSN: 0929-6212
Electronic ISSN: 1572-834X
DOI: https://doi.org/10.1007/s11277-016-3808-5

Springer Professional

Abstract

Please log in to get access to your license.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Technik"

Springer Professional "Wirtschaft+Technik"

Springer Professional "Wirtschaft"

Other articles of this Issue 2/2017

Wearable Ultra Wide Dual Band Flexible Textile Antenna for WiMax/WLAN Application

Resource Matching in Carrier Aggregation Enabling 5G Networks

Understanding 5G Wireless Cellular Network: Challenges, Emerging Research Directions and Enabling Technologies

Optimal Switching Strategy for Heterogeneous Energy Supplying Energy-efficient Two-tier Femtocell Networks

An Efficient Method for Investigating and Optimizing Near Field Characteristics of Planar Antenna Arrays

Experimental Characterization of Multipath Channels for Ultra-Wideband Systems in Indoor Environment Based on Time Dispersion Parameters