Skip to main content
Top

2022 | OriginalPaper | Chapter

Activated CFRP NSMR Ductile Strengthening System

Authors : Jacob Wittrup Schmidt, Christian Overgaard Christensen, Per Goltermann, José Sena-Cruz

Published in: Proceedings of the 3rd RILEM Spring Convention and Conference (RSCC 2020)

Publisher: Springer International Publishing

Activate our intelligent search to find suitable subject content or patents.

search-config
loading …

Abstract

This paper presents some of the initial results from an ongoing research project which concerns a new NSMR strengthening method, expected to provide high ductility and strengthening effect as well as increased response consistency. A prestress of 1100 MPa activation was applied to the ductile NSMR system and compared to a reference beam. Ductility in this system is provided by a response controlling anchorage system, which interacts with the adhesively bonded NSMR. The proposed adhesive has a low E-modulus which is expected to reduce stress concentration issues of adhesively bonded joints when compared to stiffer epoxy adhesives are used, where IC-debonding seems to be the dominating failure mode. A beam deflection increase of approximately 105% has been observed when using the low E-modulus adhesive compared to the the epoxy adhesive. Change in the failure modes were furthermore observed, where the brittle de-bonding failure modes were mitigated thus extending the yielding regime with approximately 150%.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

  • über 102.000 Bücher
  • über 537 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Finance + Banking
  • Management + Führung
  • Marketing + Vertrieb
  • Maschinenbau + Werkstoffe
  • Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

  • über 67.000 Bücher
  • über 390 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Maschinenbau + Werkstoffe




 

Jetzt Wissensvorsprung sichern!

Springer Professional "Wirtschaft"

Online-Abonnement

Mit Springer Professional "Wirtschaft" erhalten Sie Zugriff auf:

  • über 67.000 Bücher
  • über 340 Zeitschriften

aus folgenden Fachgebieten:

  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Finance + Banking
  • Management + Führung
  • Marketing + Vertrieb
  • Versicherung + Risiko




Jetzt Wissensvorsprung sichern!

Literature
1.
go back to reference Rashid, R., Oehlers, D.J., Seracino, R.I.C.: Debonding of FRP NSM and EB retrofitted concrete: plate and cover interaction tests. J. Comp. for Const. 12(2), 160–167 (2008)CrossRef Rashid, R., Oehlers, D.J., Seracino, R.I.C.: Debonding of FRP NSM and EB retrofitted concrete: plate and cover interaction tests. J. Comp. for Const. 12(2), 160–167 (2008)CrossRef
2.
go back to reference El-Hacha, R., Rizkalla, S.H.: Near-surface-mounted fiber-reinforced polymer reinforcement for flexural strengthening of concrete structures. ACI Struct. J. 101(5), 717–726 (2004) El-Hacha, R., Rizkalla, S.H.: Near-surface-mounted fiber-reinforced polymer reinforcement for flexural strengthening of concrete structures. ACI Struct. J. 101(5), 717–726 (2004)
4.
go back to reference Sabau, C., Popescu, C., Sas, G., Schmidt, J.W., Blanksvärd, T., Täljsten, B.: Strengthening of RC beams using bottom and side NSM reinforcement. Comp. Part B 149, 82–91 (2018)CrossRef Sabau, C., Popescu, C., Sas, G., Schmidt, J.W., Blanksvärd, T., Täljsten, B.: Strengthening of RC beams using bottom and side NSM reinforcement. Comp. Part B 149, 82–91 (2018)CrossRef
5.
go back to reference Nordin, H., Täljsten, B.: Concrete beams strengthened with pre-stressed near surface mounted CFRP. J. Comp. Const. 10(1), 60–68 (2006)CrossRef Nordin, H., Täljsten, B.: Concrete beams strengthened with pre-stressed near surface mounted CFRP. J. Comp. Const. 10(1), 60–68 (2006)CrossRef
6.
go back to reference Smith, S.T.: Modeling debonding failure in FRP flexurally strengthened RC members using a local deformation model. J. Comp. Const. 11(2), 184–191 (2007)CrossRef Smith, S.T.: Modeling debonding failure in FRP flexurally strengthened RC members using a local deformation model. J. Comp. Const. 11(2), 184–191 (2007)CrossRef
7.
go back to reference Teng, J.G.: Intermediate crack-induced debonding in RC beams and slabs. J. Constr. Build. Mater. 17(6), 447–462 (2003)CrossRef Teng, J.G.: Intermediate crack-induced debonding in RC beams and slabs. J. Constr. Build. Mater. 17(6), 447–462 (2003)CrossRef
8.
go back to reference Said, H., Wu, Z.: Evaluating and proposing models of predicting IC debonding failure. J. Comp. Const. 12(3), 284–299 (2008)CrossRef Said, H., Wu, Z.: Evaluating and proposing models of predicting IC debonding failure. J. Comp. Const. 12(3), 284–299 (2008)CrossRef
9.
go back to reference Täljsten, B.: Strengthening of beams by plate bonding. J. Mater. Civil Eng. 9(4), 206–212 (1997)CrossRef Täljsten, B.: Strengthening of beams by plate bonding. J. Mater. Civil Eng. 9(4), 206–212 (1997)CrossRef
10.
go back to reference Corden, G., Ibell, T., Darby, A.: Concrete cover separation failure in near-surface mounted CFRP strengthened concrete structures. Struct. Eng. 86(4), 19–21 (2008) Corden, G., Ibell, T., Darby, A.: Concrete cover separation failure in near-surface mounted CFRP strengthened concrete structures. Struct. Eng. 86(4), 19–21 (2008)
11.
go back to reference Cuntze, R.G., Freund, A.: The predictive capability of failure mode concept-based strength criteria for multidirectional laminates. J. Comp. Scien. Techn. 64, 343–377 (2004)CrossRef Cuntze, R.G., Freund, A.: The predictive capability of failure mode concept-based strength criteria for multidirectional laminates. J. Comp. Scien. Techn. 64, 343–377 (2004)CrossRef
12.
go back to reference Schmidt, J.W. Bennitz, A., Goltermann, P., Ravn, D.L.: External post-tensioning of CFRP tendons using integrated sleeve wedge anchorage. In: Proceedings of 6th International Conference on FRP Composites In Civil Engineering Rome, pp. 13–15 (2012) Schmidt, J.W. Bennitz, A., Goltermann, P., Ravn, D.L.: External post-tensioning of CFRP tendons using integrated sleeve wedge anchorage. In: Proceedings of 6th International Conference on FRP Composites In Civil Engineering Rome, pp. 13–15 (2012)
13.
go back to reference Smith, S.T., Hua, S., Kima, S.J., Seracino, R.: FRP-strengthened RC slabs anchored with FRP anchors. Eng. Struct. 33(4), 1075–1087 (2011)CrossRef Smith, S.T., Hua, S., Kima, S.J., Seracino, R.: FRP-strengthened RC slabs anchored with FRP anchors. Eng. Struct. 33(4), 1075–1087 (2011)CrossRef
14.
go back to reference Kalfat, R., Al-Mahaidi, R., Smith. S.T.: Anchorage devices used to improve the performance of reinforced concrete beams retrofitted with FRP composites: state-of-the-art review. J. Comp. Const. 17(1), 14–33 (2013) Kalfat, R., Al-Mahaidi, R., Smith. S.T.: Anchorage devices used to improve the performance of reinforced concrete beams retrofitted with FRP composites: state-of-the-art review. J. Comp. Const. 17(1), 14–33 (2013)
15.
go back to reference Schmidt J.W.: External strengthening of building structures with prestressed CFRP. Ph.D. report. Kgs. Lyngby, Denmark: Technical University of Denmark (DTU) (2011) Schmidt J.W.: External strengthening of building structures with prestressed CFRP. Ph.D. report. Kgs. Lyngby, Denmark: Technical University of Denmark (DTU) (2011)
16.
go back to reference PTI, Acceptance Standards for Post-Tensioning Systems, Post-Tensioning Institute (1998) PTI, Acceptance Standards for Post-Tensioning Systems, Post-Tensioning Institute (1998)
17.
go back to reference EOTA, Post-Tensioning Kits for Prestressing of Structures - Guideline for European technical approval, EOTA (2002) EOTA, Post-Tensioning Kits for Prestressing of Structures - Guideline for European technical approval, EOTA (2002)
18.
go back to reference Schmidt, J.W., Christensen, C.O., Goltermann, P.: Ductile response controlled EW CFRP anchor system. Compos. Part B Eng. 201, 108371 (2020)CrossRef Schmidt, J.W., Christensen, C.O., Goltermann, P.: Ductile response controlled EW CFRP anchor system. Compos. Part B Eng. 201, 108371 (2020)CrossRef
Metadata
Title
Activated CFRP NSMR Ductile Strengthening System
Authors
Jacob Wittrup Schmidt
Christian Overgaard Christensen
Per Goltermann
José Sena-Cruz
Copyright Year
2022
DOI
https://doi.org/10.1007/978-3-030-76465-4_31