Skip to main content
Top
Published in: Mechanics of Composite Materials 1/2022

17-03-2022

Adhesive Bond Strength Calculation of Reinforcing Fibers with Polymers by the “Loop” Method

Authors: S. V. Kotomin, I. M. Obidin, E. A. Pavluchkova

Published in: Mechanics of Composite Materials | Issue 1/2022

Log in

Activate our intelligent search to find suitable subject content or patents.

search-config
loading …

Abstract

The method of evaluation the adhesion strength for the fiber-polymer bond by pulling out a thread from the adhesion cell formed by a loop tightened into a knot allows one to determine the adhesion of different types of reinforcing fibers to various thermosetting and thermoplastic polymer matrices. When tightening a knot from the loop covering the tested thread, the contact pressure required in the area of adhesion joint is ensured. The geometric model was developed to determine the contact area in the adhesion cell of this type. When calculating the contact area, the thickness (linear density) of the threads forming the adhesion cell, as well as the density of the material is taken into account. The influence of pressure and time of the contact of the fiber surface with the thermoplastic melt, as well as the melt temperature and content of nanodispersed fillers on the adhesive strength is shown.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

  • über 102.000 Bücher
  • über 537 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Finance + Banking
  • Management + Führung
  • Marketing + Vertrieb
  • Maschinenbau + Werkstoffe
  • Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

  • über 67.000 Bücher
  • über 390 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Maschinenbau + Werkstoffe




 

Jetzt Wissensvorsprung sichern!

Literature
1.
go back to reference Yu. A. Gorbatkina, Adhesion Strength in Systems of Polymer–Fiber, Khimiya, Moscow (1987). Yu. A. Gorbatkina, Adhesion Strength in Systems of Polymer–Fiber, Khimiya, Moscow (1987).
2.
go back to reference R. A. Turusov, Adhesion Mechanics, NRU MGSU, Moscow 2016. R. A. Turusov, Adhesion Mechanics, NRU MGSU, Moscow 2016.
3.
go back to reference S. Zhandarov and E. Mader, “Characterization of fiber/matrix interface strength: applicability of different tests, approaches and parameters,” Compos. Sci. Technol., 65, 149-160 (2005).CrossRef S. Zhandarov and E. Mader, “Characterization of fiber/matrix interface strength: applicability of different tests, approaches and parameters,” Compos. Sci. Technol., 65, 149-160 (2005).CrossRef
5.
go back to reference Baoying Liu, Zhao Liu, Xiaojun Wang Gang Zhang, Shengru Long, and Jie Yang, “Interfacial shear strength of carbon fiber reinforced polyphenylene sulfide measured by the microbond test,” Polym. Testing, 32, 724-730 (2013).CrossRef Baoying Liu, Zhao Liu, Xiaojun Wang Gang Zhang, Shengru Long, and Jie Yang, “Interfacial shear strength of carbon fiber reinforced polyphenylene sulfide measured by the microbond test,” Polym. Testing, 32, 724-730 (2013).CrossRef
6.
go back to reference L. Yang, and J. L. Thomason, “Development and application of micromechanical techniques for characterising interfacial shear strength in fibre-thermoplastic composites,” Polym. Testing, 31, 895-903 (2012).CrossRef L. Yang, and J. L. Thomason, “Development and application of micromechanical techniques for characterising interfacial shear strength in fibre-thermoplastic composites,” Polym. Testing, 31, 895-903 (2012).CrossRef
7.
go back to reference E. V. Pisanova, S. F. Zhandarov, and V. A. Dovgyalo, “Adhesive strength in thermoplastic polymer-thin fiber systems. Measured value as a function of the testing method,” Mech. Compos. Mater., 29, No. 2, 175-180 (1993).CrossRef E. V. Pisanova, S. F. Zhandarov, and V. A. Dovgyalo, “Adhesive strength in thermoplastic polymer-thin fiber systems. Measured value as a function of the testing method,” Mech. Compos. Mater., 29, No. 2, 175-180 (1993).CrossRef
8.
go back to reference Russian Patent 2683106. Sample for determining the adhesive bond strength of the reinforcing threads and a polymer binder and a method for its manufacture / P. M. Khavalkin, A. M. Kul’kov, and Yu. V. Antipov, Declared 12.13.2018 // Discoveries. Inventions, No. 9 (2019). Russian Patent 2683106. Sample for determining the adhesive bond strength of the reinforcing threads and a polymer binder and a method for its manufacture / P. M. Khavalkin, A. M. Kul’kov, and Yu. V. Antipov, Declared 12.13.2018 // Discoveries. Inventions, No. 9 (2019).
9.
go back to reference J. Jager, M. G. R. Sause, F. Burkert, J. Moosburger-Will, M. Greisel, and S. Horn, “Influence of plastic deformation on single-fiber push-out tests of carbon fiber reinforced epoxy resin,” Composites, Part A, 71, 157-167 (2015).CrossRef J. Jager, M. G. R. Sause, F. Burkert, J. Moosburger-Will, M. Greisel, and S. Horn, “Influence of plastic deformation on single-fiber push-out tests of carbon fiber reinforced epoxy resin,” Composites, Part A, 71, 157-167 (2015).CrossRef
10.
go back to reference V. V. Kudinov, I. K. Krylov, I. Sh. Abdullin, N. V. Korneeva, V. I. Mamonov, and M. V. Gerov, “Investigation by the full pull-out method of the mutual influence and properties of fibers on the strength of their bond with the polymer matrix of a composite material,” Physics and Chemistry of Materials Processing, No. 6, 77-80 (2010). V. V. Kudinov, I. K. Krylov, I. Sh. Abdullin, N. V. Korneeva, V. I. Mamonov, and M. V. Gerov, “Investigation by the full pull-out method of the mutual influence and properties of fibers on the strength of their bond with the polymer matrix of a composite material,” Physics and Chemistry of Materials Processing, No. 6, 77-80 (2010).
12.
go back to reference Certificate of Authorship. 1280499 USSR. Sample for determining the adhesion of the fiber to the binder / S. V. Kotomin and L. P. Shevlyakov, Declared 23.08.85 // Discoveries. Inventions, No. 48 (1986). Certificate of Authorship. 1280499 USSR. Sample for determining the adhesion of the fiber to the binder / S. V. Kotomin and L. P. Shevlyakov, Declared 23.08.85 // Discoveries. Inventions, No. 48 (1986).
13.
go back to reference Yu. G. Bogdanova, Adhesion and its Role in Ensuring the Strength of Polymer Composites / Textbook for students in the specialty “non-composite nanomaterials,” MGU, Moscow (2010). Yu. G. Bogdanova, Adhesion and its Role in Ensuring the Strength of Polymer Composites / Textbook for students in the specialty “non-composite nanomaterials,” MGU, Moscow (2010).
14.
go back to reference S. O. Ilyin, T. V. Brantseva, S. V Kotomin., and S. V Antonov, “Epoxy nanocomposites as matrices for aramid fiber-reinforced plastics,”/ Polym. Compos., 39, No. 4, E2167-E2174 (2018). S. O. Ilyin, T. V. Brantseva, S. V Kotomin., and S. V Antonov, “Epoxy nanocomposites as matrices for aramid fiber-reinforced plastics,”/ Polym. Compos., 39, No. 4, E2167-E2174 (2018).
15.
go back to reference I. M. Karzov, “Influence of polyamic acid on the adhesive properties of epoxy novolac binder and the strength of polymer composites based on it,” Cand. Chemistry Sci. Thesis, MGU, Moscow (2011). I. M. Karzov, “Influence of polyamic acid on the adhesive properties of epoxy novolac binder and the strength of polymer composites based on it,” Cand. Chemistry Sci. Thesis, MGU, Moscow (2011).
16.
go back to reference S. V. Kotomin, T. N. Filippova, T. I. Barankova, and I. Y. Gorbunova, “Strength and adhesion of microplastics based on polysulfone and montmorillonite with polysulfone and a composite matrix,” Polym. Sci. Ser. D, 9, No. 3, 341-345 (2016).CrossRef S. V. Kotomin, T. N. Filippova, T. I. Barankova, and I. Y. Gorbunova, “Strength and adhesion of microplastics based on polysulfone and montmorillonite with polysulfone and a composite matrix,” Polym. Sci. Ser. D, 9, No. 3, 341-345 (2016).CrossRef
19.
go back to reference S. V .Kotomin, P. P. Romanov, E. I. Sapozhnikov, and A. V. Tokarev, “Comparison of phisico-mechanical properties of unidirectional organoplastics based on epoxy and on polyamide binders,” Fiber Chem., No. 5, 389-392 (1992). S. V .Kotomin, P. P. Romanov, E. I. Sapozhnikov, and A. V. Tokarev, “Comparison of phisico-mechanical properties of unidirectional organoplastics based on epoxy and on polyamide binders,” Fiber Chem., No. 5, 389-392 (1992).
20.
go back to reference E. A. Pavlyuchkova, A. Ya. Malkin, S. V. Kotomin, E. I. Frenkin, and I. D. Simonov-Emel’yanov, “Melt rheology of acrylonitrile-styrene copolymer modified with montmorillonite,” Polymer Science, Ser. А, 60, No. 4, 321-328 (2018). E. A. Pavlyuchkova, A. Ya. Malkin, S. V. Kotomin, E. I. Frenkin, and I. D. Simonov-Emel’yanov, “Melt rheology of acrylonitrile-styrene copolymer modified with montmorillonite,” Polymer Science, Ser. А, 60, No. 4, 321-328 (2018).
21.
go back to reference S. V. Kotomin, “Polymer molecular composites: expectations and results,” Nanoengineering, 4, 30-37 (2011). S. V. Kotomin, “Polymer molecular composites: expectations and results,” Nanoengineering, 4, 30-37 (2011).
22.
go back to reference E. S. Zelenskii, A. M. Kuperman, Yu. A. Gorbatkina, V. G. Ivanova-Mumzhieva, and A. A. Berlin, “Reinforced plastics — advanced structural materials,” Rossiiskii Khimicheskii Zhurnal, 45, No. 2, 57-71 (2001). E. S. Zelenskii, A. M. Kuperman, Yu. A. Gorbatkina, V. G. Ivanova-Mumzhieva, and A. A. Berlin, “Reinforced plastics — advanced structural materials,” Rossiiskii Khimicheskii Zhurnal, 45, No. 2, 57-71 (2001).
23.
go back to reference K. E. Perepelkin, Reinforcing Fibers and Fibrous Polymer Composites, Pubsish. HOT, Sankt Petersburg (2009). K. E. Perepelkin, Reinforcing Fibers and Fibrous Polymer Composites, Pubsish. HOT, Sankt Petersburg (2009).
24.
go back to reference Fiber Technology for Processing Thermoplastic Composite Materials / Ed. G. S. Golovkin, MAI, Moscow (1993). Fiber Technology for Processing Thermoplastic Composite Materials / Ed. G. S. Golovkin, MAI, Moscow (1993).
25.
go back to reference L. M. Bolotina, Yu. A. Gorbatkina, V. G. Ivanova-Mumzhieva, and N. V. Korneeva, “Influence of the molecular weight of polysulfones on their adhesion to fibers,” Polymer Science, Ser. B, 44, No. 8, 1427-1432 (2002). L. M. Bolotina, Yu. A. Gorbatkina, V. G. Ivanova-Mumzhieva, and N. V. Korneeva, “Influence of the molecular weight of polysulfones on their adhesion to fibers,” Polymer Science, Ser. B, 44, No. 8, 1427-1432 (2002).
26.
go back to reference T. V Brantseva., S. V Antonov., and I. Yu. Gorbunova, “Adhesion properties of the nanocomposites filled with aluminosilicates and factors affecting them: A review,” Int. J. Adhes. Adhes., 82, 263-281 (2018). T. V Brantseva., S. V Antonov., and I. Yu. Gorbunova, “Adhesion properties of the nanocomposites filled with aluminosilicates and factors affecting them: A review,” Int. J. Adhes. Adhes., 82, 263-281 (2018).
27.
go back to reference Yu. A. Gorbatkina, V. G. Ivanova-Mumzhieva, and A. M. Kuperman, “Adhesion of modified epoxy matrices to reinforcing fibers,” Polymer Science, Ser. А, 58, No. 5, 439-447 (2016). Yu. A. Gorbatkina, V. G. Ivanova-Mumzhieva, and A. M. Kuperman, “Adhesion of modified epoxy matrices to reinforcing fibers,” Polymer Science, Ser. А, 58, No. 5, 439-447 (2016).
29.
go back to reference A. V. Azarov, F. K. Antonov, M. V. Golubev, A. R. Khaziev, and S. A. Ushanov, “Composite 3D printing for the small size unmanned aerial vehicle structure,” Composites, Part B, 169, 157-163 (2019).CrossRef A. V. Azarov, F. K. Antonov, M. V. Golubev, A. R. Khaziev, and S. A. Ushanov, “Composite 3D printing for the small size unmanned aerial vehicle structure,” Composites, Part B, 169, 157-163 (2019).CrossRef
Metadata
Title
Adhesive Bond Strength Calculation of Reinforcing Fibers with Polymers by the “Loop” Method
Authors
S. V. Kotomin
I. M. Obidin
E. A. Pavluchkova
Publication date
17-03-2022
Publisher
Springer US
Published in
Mechanics of Composite Materials / Issue 1/2022
Print ISSN: 0191-5665
Electronic ISSN: 1573-8922
DOI
https://doi.org/10.1007/s11029-022-10017-2

Other articles of this Issue 1/2022

Mechanics of Composite Materials 1/2022 Go to the issue

Premium Partners