Skip to main content
Disciplines
Automotive Business IT + Informatics Construction + Real Estate Electrical Engineering + Electronics Energy + Sustainability Insurance + Risk Finance + Banking Management + Leadership Marketing + Sales Mechanical Engineering + Materials
Events
DE
EN
Books
Journals
Topic Page
Marketing
Start single access now
Access for companies
EXTENDED SEARCH
Log in
Top
Published in:
Cover of the book

2012 | OriginalPaper | Chapter

Advances in Numerical Modelling of Adhesive Joints

Authors : Lucas F. M. da Silva, Raul D. S. G. Campilho

Published in: Advances in Numerical Modeling of Adhesive Joints

Publisher: Springer Berlin Heidelberg

Log in

Activate our intelligent search to find suitable subject content or patents.

search-config
loading …

Abstract

The analysis of adhesively bonded joints started in 1938 with the closed-form model of Volkersen. The equilibrium equation of a single lap joint led to a simple governing differential equation with a simple algebraic equation. However, if there is yielding of the adhesive and/or the adherends and substantial peeling is present, a more complex model is necessary. The more complete is an analysis, the more complicated it becomes and the more difficult it is to obtain a simple and effective solution. The finite element (FE) method, the boundary element (BE) method and the finite difference (FD) method are the three major numerical methods for solving differential equations in science and engineering. These methods have also been applied to adhesive joints, especially the FE method. This book deals with the most recent numerical modelling of adhesive joints. Advances in damage mechanics and extended finite element method are described in the context of the FE method with examples of application. The classical continuum mechanics and fracture mechanics approach are also introduced. The BE method and the FD method are also discussed with indication of the cases they are most adapted to. There is not at the moment a numerical technique that can solve any problem and the analyst needs to be aware of the limitations involved in each case.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

  • über 102.000 Bücher
  • über 537 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Finance + Banking
  • Management + Führung
  • Marketing + Vertrieb
  • Maschinenbau + Werkstoffe
  • Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

inform now

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

  • über 67.000 Bücher
  • über 390 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Maschinenbau + Werkstoffe




 

Jetzt Wissensvorsprung sichern!

inform now
Literature
Abaqus® Documentation (2009) Dassault Systèmes, Vélizy-Villacoublay
A. Abdul-Baqi, P.J.G. Schreurs, M.G.D. Geers, Fatigue damage modeling in solder interconnects using a cohesive zone approach. Int. J. Solids Struct. 42, 927–942 (2005)MATH
R.D. Adams, R. Davies, Strength of joints involving composites. J. Adhesion 59, 171–182 (1996)
R.D. Adams, R. Davies, Strength of lap shear joints, in The Mechanics of Adhesion, ed. by D.A. Dillard, A.V. Pocius (Elsevier, Amsterdam, 2002)
R.D. Adams, J.A. Harris, Strength prediction of bonded single lap joints by nonlinear finite element methods. Int J Adhes Adhes 4, 65–78 (1984)
R.D. Adams, J.A. Harris, The influence of local geometry on the strength of adhesive joints. Int. J. Adhes. Adhes. 7, 69–80 (1987)
R.D. Adams, V. Mallick, A method for the stress analysis of lap joints. J. Adhesion 38, 199–217 (1992)
R.D. Adams, N.A. Peppiatt, Effects of Poisson’s ratio strains in adherend on stresses of an idealized lap joint. J. Strain Anal. 8, 134–139 (1973)
R.D. Adams, N.A. Peppiatt, Stress analysis of adhesive-bonded lap joints. J. Strain Anal. 9, 185–196 (1974)
R.D. Adams, R.W. Atkins, J.A. Harris, A.J. Kinloch, Stress analysis and failure properties of carbon-fibre-reinforced-plastic/steel double-lap joints. J. Adhesion 20, 29–53 (1986)
R.D. Adams, J. Comyn, W.C. Wake, Structural Adhesive Joints in Engineering, 2nd edn. (Chapman & Hall, London, 1997)
G. Alfano, On the influence of the shape of the interface law on the application of cohesive-zone models. Compos. Sci. Technol. 66, 723–730 (2006)
G. Alfano, M.A. Crisfield, Finite element interface models for the delamination analysis of laminated composites: mechanical and computational issues. Int. J. Numer. Methods Eng. 50, 1701–1736 (2001)MATH
O. Allix, A. Corigliano, Modeling and simulation of crack propagation in mixed-modes interlaminar fracture specimens. Int. J. Fract. 77, 111–140 (1996)
T. Andersson, U. Stigh, The stress-elongation relation for an adhesive layer loaded in peel using equilibrium of energetic forces. Int. J. Solids Struct. 41, 413–434 (2004)
I. Ashcroft, Fatigue Load Conditions, in Handbook of Adhesion Technology, ed. by L.M.F. da Silva, A. Öchsner, R.D. Adams (Springer, Heidelberg, 2011)
ASTM D3433-99 Standard, Standard Test Method for Fracture Strength in Cleavage of Adhesives in Bonded Metal Joints. ASTM International, West Conshohocken (2005)
ASTM D4501-01, Standard Test Method for Shear Strength of Adhesive Bonds Between Rigid Substrates by The Block Shear Method (ASTM International, West Conshohocken, 2009)
M.G. Bader, I. Hamerton, J.N. Hay, M. Kemp, S. Winchester, Double cantilever beam of repaired carbon fibre composites. Compos Part A 31, 603–608 (2000)
M.D. Banea, L.F.M. da Silva, Adhesively bonded joints in composite materials: an overview. J. Mater. Design Appl. 223, 1–18 (2009)
M.D. Banea, L.F.M. da Silva, R.D.S.G. Campilho, Temperature dependence of the fracture toughness of adhesively bonded joints. J. Adhesion Sci. Technol. 24, 2011–2026 (2010)
M.D. Banea, L.F.M. da Silva, R.D.S.G. Campilho, Mode I fracture toughness of adhesively bonded joints as a function of temperature: experimental and numerical study. Int. J. Adhes. Adhes. 31, 273–279 (2011)
G.I. Barenblatt, The formation of equilibrium cracks during brittle fracture. General ideas and hypothesis. Axisymmetrical cracks. J. Appl. Math. Mech. 23, 622–636 (1959)MathSciNetMATH
G.I. Barenblatt, The mathematical theory of equilibrium cracks in brittle fracture. Adv. Appl. Mech. 7, 55–129 (1962)MathSciNet
W.D. Bascom, R.L. Cottingham, Effect of temperature on the adhesive fracture behavior of an elastomer–epoxy resin. J. Adhesion 7, 333–346 (1976)
W.D. Bascom, R.L. Cottingham, R.L. Jones, P. Peyser, The fracture of epoxy- and elastomer-modified epoxy polymers in bulk and as adhesives. J. Appl. Polymer Sci. 19, 2545–2562 (1975)
A.J. Bell, A.J. Kinlock, The effect of the substrate material on the value of the adhesive fracture energy, G(c). J. Mater. Sci. Lett. 16, 150–1453 (1997)
T. Belytschko, T. Black, Elastic crack growth in finite elements with minimal remeshing. Int. J. Fract. Mech. 45, 601–620 (1999)MATH
M.L. Benzeggagh, M. Kenane, Measurement of mixed-mode delamination fracture toughness of unidirectional glass/epoxy composites with mixed-mode bending apparatus. Compos. Sci. Technol. 56, 439–449 (1996)
B. Bhattacharya, B. Ellingwood, Continuum damage mechanics analysis of fatigue crack initiation. Int. J. Fatigue 20, 631–639 (1998)
A. Biel, Constitutive behaviour and fracture toughness of an adhesive layer. Licentiate of Engineering Dissertation, Chalmers University of Technology (2005)
A. Biel, U. Stigh, Effects of constitutive parameters on the accuracy of measured fracture energy using the DCB-specimen. Eng. Fract. Mech. 75, 2968–2983 (2008)
D.A. Bigwood, A.D. Crocombe, Non linear adhesive bonded joint design analysis. Int. J. Adhes. Adhes. 10, 31–41 (1990)
B.R.K. Blackman, H. Hadavinia, A.J. Kinloch, J.G. Williams, The use of a cohesive zone model to study the fracture of fibre composites and adhesively-bonded joints. Int. J. Fract. 119, 25–46 (2003)
B.R.K. Blackman, A.J. Kinloch, M. Paraschi, The determination of the mode II adhesive fracture resistance, GIIC, of structural adhesive joints: an effective crack length approach. Eng. Fract. Mech. 72, 877–897 (2005)
D. Bushnell, B.O. Almroth, F. Brogan, Finite-difference energy method for nonlinear shell analysis. Comput. Struct. 1, 361–387 (1971)
R.D.S.G. Campilho, M.F.S.F. de Moura, J.J.M.S. Domingues, Modelling single and double-lap repairs on composite materials. Compos. Sci. Technol. 65, 1948–1958 (2005)
R.D.S.G. Campilho, M.F.S.F. de Moura, J.J.M.S. Domingues, Stress and failure analyses of scarf repaired CFRP laminates using a cohesive damage model. J. Adhes. Sci. Technol. 21, 855–970 (2007)
R.D.S.G. Campilho, M.F.S.F. de Moura, J.J.M.S. Domingues, Using a cohesive damage model to predict the tensile behaviour of CFRP single-strap repairs. Int. J. Solids Struct. 45, 1497–1512 (2008a)MATH
R.D.S.G. Campilho, M.F.S.F. de Moura, J.J.M.S. Domingues, J.J.L. Morais, Computational modelling of the residual strength of repaired composite laminates using a cohesive damage model. J. Adhes. Sci. Technol. 22, 1565–1591 (2008b)
R.D.S.G. Campilho, M.F.S.F. de Moura, J.J.M.S. Domingues, Numerical prediction on the tensile residual strength of repaired CFRP under different geometric changes. Int. J. Adhes. Adhes. 29, 195–205 (2009a)
R.D.S.G. Campilho, M.F.S.F. de Moura, A.M.G. Pinto, J.J.L. Morais, J.J.M.S. Domingues, Modelling the tensile fracture behaviour of CFRP scarf repairs. Compos. Part B 40, 149–157 (2009b)
R.D.S.G. Campilho, M.F.S.F. de Moura, D.A. Ramantani, J.J.L. Morais, J.J.M.S. Domingues, Tensile behaviour of three-dimensional carbon-epoxy adhesively bonded single- and double-strap repairs. Int. J. Adhes. Adhes. 29, 678–686 (2009c)
R.D.S.G. Campilho, M.F.S.F. de Moura, D.A. Ramantani, J.J.L. Morais, A.M.J.P. Barreto, J.J.M.S. Domingues, Adhesively-bonded repair proposal for wood members damaged by horizontal shear using carbon-epoxy patches. J. Adhesion 86, 649–670 (2010)
R.D.S.G. Campilho, M.D. Banea, A.M.G. Pinto, L.F.M. da Silva, A.M.P. de Jesus, Strength prediction of single- and double-lap joints by standard and extended finite element modelling. Int. J. Adhes. Adhes. 31, 363–372 (2011a)
R.D.S.G. Campilho, A.M.G. Pinto, M.D. Banea, L.F.M. da Silva, Optimization study of hybrid spot welded-bonded single-lap joints. Int. J. Adhes. Adhes. (2011b) (accepted)
R.D.S.G. Campilho, M.D. Banea, F.J.P. Chaves, L.F.M. da Silva, Modelling of single-lap joints using cohesive zones models: effect of the cohesive parameters on the output of the simulations. J. Adhesion (2011c) (accepted)
R.D.S.G. Campilho, M.D. Banea, F.J.P. Chaves, L.F.M. da Silva, eXtended Finite Element Method for fracture characterization of adhesive joints in pure mode I. Comput. Mater. Sci. 50, 1543–1549 (2011d)
R.D.S.G. Campilho, Modelação da Execução de Reparações em Materiais Compósitos. M.Sc. Dissertation, Engineering Faculty of Porto University (2005)
R.D.S.G. Campilho, Repair of composite and wood structures. Ph.D. Dissertation, Engineering Faculty of Porto University (2009)
T. Carlberger, U. Stigh, An explicit FE-model of impact fracture in an adhesive joint. Eng. Fract. Mech. 74, 2247–2262 (2007)
T. Carlberger, U. Stigh, Influence of layer thickness on cohesive properties of an epoxy-based adhesive—an experimental study. J. Adhesion 86, 814–833 (2010)
T. Carlberger, A. Biel, U. Stigh, Influence of temperature and strain rate on cohesive properties of a structural epoxy adhesive. Int. J. Fract. 155, 155–166 (2009)
M.N. Cavalli, M.D. Thouless, The effect of damage nucleation on the toughness of an adhesive joint. J. Adhesion 76, 75–92 (2001)
G. Cavallini, G. Davi, A. Milazzo, Boundary element modeling and analysis of adhesive bonded structural joints. Electron. J. Bound Elem. 4, 31–48 (2006)MathSciNet
H. Chai, Bond thickness effect in adhesive joints and its significance for mode I interlaminar fracture of composites. ASTM STP 893, 209–231 (1986a)
H. Chai, On the correlation between the mode I failure of adhesive joints and laminated composites. Eng. Fract. Mech. 24, 413–431 (1986b)
H. Chai, Shear fracture. Int. J. Fract. 37, 137–159 (1988)
H. Chai, Experimental evaluation of mixed-mode fracture in adhesive bonds. Experimental Mech. 32, 296–303 (1992)
N. Chandra, H. Li, C. Shet, H. Ghonem, Some issues in the application of cohesive zone models for metal–ceramic interfaces. Int. J. Solids Struct. 39, 2827–2855 (2002)MATH
M. Charalambides, A.J. Kinloch, Y. Wang, J.G. Williams, On the analysis of mixed mode failure. Int. J. Fracture 54, 269–291 (1992)
J. Chen, Predicting progressive delamination of stiffened fibre-composite panel and by decohesion models. J. Thermopl. Compos. Mater. 15, 429–441 (2002)
Z. Chen, R.D. Adams, L.F.M. da Silva, The use of the J-integral to analyse adhesive bonds with and without a crack. Int. J. Adhes. Adhes. 31, 48–55 (2011a)
Z. Chen, R.D. Adams, L.F.M. da Silva, Prediction of crack initiation and propagation of adhesive lap joints using an energy failure criterion. Eng. Fract. Mech. 78, 990–1007 (2011b)
P.T. Cheuk, L. Tong, A.N. Rider, J. Wang, Analysis of energy release rate for fatigue cracked metal-to-metal double-lap shear joints. Int. J. Adhes. Adhes. 25, 181–191 (2005)
J.Y. Choi, H.J. Kim, J.K. Lim, Y.W. Mai, Numerical analysis of adhesive thickness effect on fracture toughness in adhesive-bonded joints. Key Eng. Mat. 270–273, 1200–1205 (2004)
N. Choupani, Interfacial mixed-mode fracture characterization of adhesively bonded joints. Int. J. Adhes. Adhes. 28, 267–282 (2008)
J.D. Clarke, I.J. Mcgregor, Ultimate tensile stress over a zone: a new failure criterion for adhesive joints. J. Adhes. 42, 227–245 (1993)
L. Collatz, The Numerical Treatment of Differential Equations (Springer, Berlin, 1966)
R.D. Cook, Finite Element Modeling for Stress Analysis (Wiley, New York, 1995)MATH
R. Courant, Variational methods for the solution of problems of equilibrium and vibrations. Bull. Am. Math. Soc. 49, 1–23 (1943)MathSciNetMATH
J.H. Crews, K.N. Shivakumar, I.S. Raju, Factors influencing elastic stresses in double cantilever beam specimens. ASTM STP 981, 119–132 (1988)
A.D. Crocombe, Global yielding as a failure criteria for bonded joints. Int. J. Adhes. Adhes. 9, 145–153 (1989)
A.D. Crocombe, R.D. Adams, Influence of the spew fillet and other parameters on the stress distribution in the single lap joint. J. Adhes. 13, 141–155 (1981)
A.D. Crocombe, D.A. Bigwood, Development of a full elasto-plastic adhesive joint design. J. Strain Anal. Eng. Des. 27, 211–218 (1992)
A.D. Crocombe, Y.X. Hua, W.K. Loh, M.A. Wahab, I.A. Ashcroft, Predicting the residual strength for environmentally degraded adhesive lap joints. Int. J. Adhes. Adhes. 26, 325–336 (2006)
R.W. Clough, Second ASCE Conference on Electronic Computation, Pittsburgh, PA (1960)
W. Cui, M.R. Wisnom, A combined stress-based and fracture-mechanics-based model for predicting delamination in composites. Composites 24, 467–474 (1993)
L.F.M. da Silva, G.W. Critchlow, M.A.V. Figueiredo, Parametric study of adhesively bonded single lap joints by the Taguchi method. J. Adhes. Sci. Technol. 22(13), 1477–1494 (2008)
L.F.M. da Silva, R.J.C. Carbas, G.W. Critchlow, M.A.V. Figueiredo, K. Brown, Effect of material, geometry, surface treatment and environment on the shear strength of single lap joints. Int. J. Adhes. Adhes. 29, 621–632 (2009a)
L.F.M. da Silva, P.J.C. das Neves, R.D. Adams, J.K. Spelt, Analytical models of adhesively bonded joints—Part I: literature survey. Int. J. Adhes. Adhes. 29, 319–330 (2009b)
L.F.M. da Silva, P.J.C. das Neves, R.D. Adams, A. Wang, J.K. Spelt, Analytical models of adhesively bonded joints—part II: comparative study. Int. J. Adhes. Adhes. 29, 331–341 (2009c)
L.F.M. da Silva, R.F.T. Lima, R.M.S. Teixeira, Development of a software for the design of adhesive joints. J. Adhes. 85, 889–918 (2009d)
L.F.M. da Silva, A. Öchsner, R.D. Adams (eds.), Handbook of Adhesion Technology (Springer, Heidelberg, 2011)
L. Daudeville, P. Ladeveze, A damage mechanics tool for laminate delamination. Compos. Struct. 25, 547–555 (1993)
C. Daux, N. Moës, J. Dolbow, N. Sukumark, T. Belytschko, Arbitrary branched and intersecting cracks with the extended finite element method. Int. J. Numer. Meth. Eng. 48, 1741–1760 (2000)MATH
M.F.S.F. de Moura, R.D.S.G. Campilho, J.P.M. Gonçalves, Crack equivalent concept applied to the fracture characterization of bonded joints under pure mode I loading. Compos. Sci. Technol. 68, 2224–2230 (2008)
M.F.S.F. de Moura, R.D.S.G. Campilho, J.P.M. Gonçalves, Pure mode II fracture characterization of composite bonded joints. Int. J. Solids Struct. 46, 1589–1595 (2009)
D.A. Dillard, H.K. Singh, D.J. Pohlit, Observations of decreased fracture toughness for mixed mode fracture testing of adhesively bonded joints. J. Adhes. Sci. Technol. 23, 515–1530 (2009)
J. Dolbow, N. Moës, T. Belytschko, An extended finite element method for modeling crack growth with frictional contact. Finite Elem. Anal. Des. 36, 235–260 (2000)MATH
K. Duan, X.Z. Hu, F.H. Wittmann, Explanation of size effect in concrete fracture using non-uniform energy distribution. Mater. Struct. 35, 326–331 (2002)
K. Duan, X.Z. Hu, F.H. Wittmann, Boundary effect on concrete fracture and non-constant fracture energy distribution. Eng. Fract. Mech. 70, 2257–2268 (2003)
K. Duan, X. Hu, Y.W. Mai, Substrate constraint and adhesive thickness effects on fracture toughness of adhesive joints. J. Adhes. Sci. Technol. 18, 39–53 (2004)
P.A. DuBois, Crashworthiness Engineering Course Notes (Livermore Software Technology Corporation, Livermore, 2004)
F. Ducept, P. Davies, D. Gamby, Mixed mode failure criteria for a glass/epoxy composite and an adhesively bonded composite/composite joint. Int. J. Adhes. Adhes. 20, 233–244 (2000)
D.S. Dugdale, Yielding of steel sheets containing slits. J. Mech. Phys. Solids 8, 100–104 (1960)
T. Elguedj, A. Gravouil, A. Combescure, Appropriate extended functions for X-FEM simulation of plastic fracture mechanics. Comput. Methods Appl. Mech. Eng. 195, 501–515 (2006)MATH
Engineering Sciences Data Unit, Inelastic shear stresses and strains in adhesive bonding lap joints loaded in tension or shear (Computer Program). Engineering Sciences Data Item Number 79016 (1979)
M. Fagerström, R. Larsson, Theory and numerics for finite deformation fracture modelling using strong discontinuities. Int. J. Numer. Methods Eng. 66, 911–948 (2006)MATH
P. Feraren, H.M. Jensen, Cohesive zone modelling of interface fracture near flaws in adhesive joints. Eng. Fract. Mech. 71, 2125–2142 (2004)
G. Fernlund, J.K. Spelt, Failure load prediction. Int. J. Adhes. Adhes. 11, 213–227 (1991)
G. Fernlund, M. Papini, D. McCammond, J.K. Spelt, Fracture load predictions for adhesive joints. Compos. Sci. Technol. 51, 587–600 (1994)
D.B. Flinn, C.S. Lo, W.F. Zok, A.G. Evans, Fracture resistance characteristics of a metal-toughened ceramic. J. Am. Ceram. Soc. 76, 369–375 (1993)
G.E. Forsythe, W.R. Wasow, Finite-Difference Methods for Partial Differential Equations (Wiley, New York, 1960)MATH
D.M. Gleich, M.J.L. Van Tooren, A. Beukers, Analysis and evaluation of bondline thickness effects on failure load in adhesively bonded structures. J. Adhes. Sci. Technol. 15, 1091–1101 (2001)
M. Goland, E. Reissner, The stresses in cemented joints. J. Appl. Mech. 66, A17–A27 (1944)
J.P.M. Gonçalves, M.F.S.F. de Moura, P.T. de Castro, A.T. Marques, Interface element including point-to-surface constraints for three-dimensional problems with damage propagation. Eng. Comput. 17, 28–47 (2000)MATH
J.P.M. Gonçalves, M.F.S.F. de Moura, P.M.S.T. de Castro, A three-dimensional finite element model for stress analysis of adhesive joints. Int. J. Adhes. Adhes. 22, 357–365 (2002)
L. Greenwood, The Strength of a Lap Joint, in Aspects of Adhesion-5, ed. by D. Alner (University of London Press, London, 1969)
H.L. Groth, Stress singularities and fracture at interface corners in bonded joints. Int. J. Adhes. Adhes. 8, 107–113 (1988)
A.L. Gurson, Continuum theory of ductile rupture by void nucleation and growth. Part I: yield criteria and flow rules for porous ductile media. J. Eng. Mater. Technol. 99, 2–15 (1977)
L. Hamitouche, M. Tarfaoui, A. Vautrin, An interface debonding law subject to viscous regularization for avoiding instability: application to the delamination problems. Eng. Fract. Mech. 75, 3084–3100 (2008)
L.J. Hart-Smith, Adhesive-bonded single-lap joints. NASA Contract Report, NASA CR-112236 (1973)
S. Hashemi, A.J. Kinloch, J.G. Williams, Corrections needed in double cantilever beam tests for assessing the interlaminar failure of fibre composites. J. Mater. Sci. Lett. 8, 125–129 (1989)
J.L. Högberg, U. Stigh, Specimen proposals for mixed mode testing of adhesive layer. Eng. Fract. Mech. 73, 2541–2556 (2006)
J.L. Högberg, B.F. Sørensen, U. Stigh, Constitutive behaviour of mixed mode loaded adhesive layer. Int. J. Solids Struct. 44, 8335–8354 (2007)MATH
M. Hojo, T. Ando, M. Tanaka, T. Adachi, S. Ochiai, Y. Endo, Modes I and II interlaminar fracture toughness and fatigue delamination of CF/epoxy laminates with self-same epoxy interleaf. Int. J. Fatigue 28, 1154–1165 (2006)MATH
Y. Hua, A.D. Crocombe, M.A. Wahab, I.A. Ashcroft, Continuum damage modelling of environmental degradation in joints bonded with EA9321 epoxy adhesive. Int. J. Adhes. Adhes. 28, 302–313 (2008)
D.L. Hunston, A.J. Kinloch, S.J. Shaw, S.S. Wang, Characterization of fracture behavior of adhesive joints, in Characteristics Formation Testing, Adhesive Joints, ed. by K. Mittal (Plenum Press, New York, 1984)
D.L. Hunston, A.J. Kinloch, S.S. Wang, Micromechanics of fracture in structural adhesive bonds. J. Adhes. 28, 103–114 (1989)
J.W. Hutchinson, Singular behavior at the end of a tensile crack in a hardening material. J. Mech. Phys. Solids 16, 13–31 (1968)MATH
T. Ikeda, A. Yamashita, N. Miyazaki, Elastic-plastic analysis of crack in adhesive joint by combination of boundary element and finite element methods. Comput. Mech. 21, 533–539 (1998)MATH
T. Ikeda, A. Yamashita, D. Lee, N. Miyazaki, Failure of a ductile adhesive layer constrained by hard adherends. J. Eng. Mater. Technol. 122, 80–85 (2000)
K. Ikegami, T. Takeshita, K. Matsuo, T. Sugibayashi, Strength of adhesively bonded scarf joints between glass fibre-reinforced plastics and metal. Int. J. Adhes. Adhes. 10, 199–206 (1990)
M. Imanaka, T. Hamano, A. Morimoto, R. Ashino, M. Kimoto, Fatigue damage evaluation of adhesively bonded butt joints with a rubber-modified epoxy adhesive. J. Adhes. Sci. Technol. 17, 981–994 (2003)
G. Ji, Z. Ouyang, G. Li, S. Ibekwe, S.S. Pang, Effects of adhesive thickness on global and local Mode-I interfacial fracture of bonded joints. Int. J. Solids Struct. 47, 2445–2458 (2010)MATH
J. Jing, F. Gao, J. Johnson, F.Z. Liang, R.L. Williams, J. Qu, Simulation of dynamic fracture along solder-pad interfaces using a cohesive zone model. Eng. Failure Anal. 16, 1579–1586 (2009)
S.J. John, A.J. Kinloch, F.L. Matthews, Measuring and predicting the durability of bonded fibre/epoxy composite joints. Composites 22, 121–127 (1991)
A. Karac, B.R.K. Blackman, V. Cooper, A.J. Kinloch, S.R. Sanchez, W.S. Teo, A. Ivankovic, Modelling the fracture behavior of adhesively-bonded joints as a function of test rate. Eng. Fract. Mech. 78, 973–989 (2011)
M.S. Kafkalidis, M.D. Thouless, The effects of geometry and material properties on the fracture of single lap-shear joints. Int. J. Solids Struct. 39, 4367–4383 (2002)MATH
P.I. Kattan, G.Z. Voyiadjis, Damage Mechanics with Finite Elements (Springer, Heidelberg, 2005)
A.R. Khoei, M. Nikbakht, Contact friction modeling with the extended finite element method (X-FEM). J. Mater. Process. Technol. 177, 58–62 (2006)
H. Khoramishad, A.D. Crocombe, K.B. Katnam, I.A. Ashcroft, Predicting fatigue damage in adhesively bonded joints using a cohesive zone model. Int. J. Fatigue 32, 1146–1158 (2010)
H. Kim, K.T. Kedward, Stress analysis of adhesively-bonded joints under in-plane shear loading. J. Adhesion 76, 1–36 (2001)
A.J. Kinloch, Adhesion and Adhesives: Science and Technology (Chapman & Hall, London, 1987)
A.J. Kinloch, S.J. Shaw, The fracture resistance of a toughened epoxy adhesive. J. Adhesion 12, 59–77 (1981)
A.J. Kinloch, J.G. Williams, Crack blunting mechanisms in polymers. J. Mater. Sci. 15, 987–996 (1980)
A.J. Kinloch, R.J. Young, Fracture Behaviour of Polymers (Applied Science Publishers, London, 1983)
L. Lammerant, I. Verpoest, Modelling of the interaction between matrix cracks and delaminations during impact of composite plates. Compos. Sci. Technol. 56, 1171–1178 (1996)
S.S. Lee, Boundary element analysis of the stress singularity at the interface corner of viscoelastic adhesive layers. Int. J. Solids Struct. 35, 1385–1394 (1998)MATH
S.J. Lee, D.G. Lee, Development of a failure model for the adhesively bonded tubular single lap joint. J. Adhes. 40, 1–14 (1992)
D.B. Lee, T. Ikeda, N. Miyazaki, N.S. Choi, Fracture behavior around a crack tip in rubber-modified epoxy adhesive joint with various bond thicknesses. J. Mater. Sci. Lett. 22, 229–233 (2003)
D.B. Lee, T. Ikeda, N. Miyazaki, N.S. Choi, Effect of bond thickness on the fracture toughness of adhesive joints. J. Eng. Mater. Technol. 126, 14–18 (2004)
M.J. Lee, T.M. Cho, W.S. Kim, B.C. Lee, J.J. Lee, Determination of cohesive parameters for a mixed-mode cohesive zone model. Int. J. Adhes. Adhes. 30, 322–328 (2010)
K. Leffler, K.S. Alfredsson, U. Stigh, Shear behaviour of adhesive layers. Int. J. Solids Struct. 44, 530–545 (2007)MATH
J. Lemaitre, Local approach of fracture. Eng. Fract. Mech. 25, 523–537 (1986)
J. Lemaitre, J.M. Chaboche, Mechanics of Solid Materials (Cambridge University Press, Cambridge, 1985)
J. Lemaitre, R. Desmorat, Engineering Damage Mechanics (Springer, Heidelberg, 2005)
S. Li, M.D. Thouless, A.M. Waas, J.A. Schroeder, P.D. Zavattieri, Use of Mode-I cohesive-zone models to describe the fracture of an adhesively-bonded polymer–matrix composite. Compos. Sci. Technol. 65, 281–293 (2005a)
S. Li, M.D. Thouless, A.M. Waas, J.A. Schroeder, P.D. Zavattieri, Use of a cohesive-zone model to analyze the fracture of a fiber reinforced polymer–matrix composite. Compos. Sci. Technol. 65, 537–549 (2005b)
C.D.M. Liljedahl, A.D. Crocombe, M.A. Wahab, I.A. Ashcroft, Damage modelling of adhesively bonded joints. Int. J. Fract. 141, 147–161 (2006)
X. Liu, G. Wang, Progressive failure analysis of bonded composite repairs. Compos. Struct. 81, 331–340 (2007)
H. Liu, X.L. Zhao, R. Al-Mahaidi, Boundary element analysis of CFRP reinforced steel plates. Compos. Struct. 91, 74–83 (2009)
A.G. Magalhães, M.F.S.F. de Moura, J.P.M. Gonçalves, Evaluation of stress concentration effects in single-lap bonded joints of laminate composite materials. Int. J. Adhes. Adhes. 25, 313–319 (2005)
S. Maiti, P.H. Geubelle, A cohesive model for fatigue failure of polymers. Eng. Fract. Mech. 72, 691–708 (2005)
A.V. Mello, K.M. Liechti, The effect of self-assembled monolayers on interfacial fracture. J. Appl. Mech. 73, 860–870 (2006)MATH
Y. Mi, M.A. Crisfield, G.A.O. Davies, H.B. Hellweg, Progressive delamination using interface elements. J. Compos. Mater. 32, 1246–1272 (1998)
A.R. Mitchell, D.F. Griffiths, The Finite Difference Method in Partial Differential Equations (Wiley, New York, 1980)MATH
N. Moës, T. Belytschko, Extended finite element method for cohesive crack growth. Eng. Fract. Mech. 69, 813–833 (2002)
N. Moës, J. Dolbow, T. Belytschko, A finite element method for crack growth without remeshing. Int. J. Numer. Meth. Eng. 46, 131–150 (1999)MATH
S. Mohammadi, Extended Finite Element Method for Fracture Analysis of Structures (Blackwell Publishing, New Jersey, 2008)MATH
F. Moroni, A. Pirondi, A procedure for the simulation of fatigue crack growth in adhesively bonded joints based on the cohesive zone model and different mixed-mode propagation criteria. Eng. Fract. Mech. 78, 1808–1816 (2011)
F. Mortensen, O.T. Thomsen, Analysis of adhesive bonded joints: a unified approach. Compos. Sci. Technol. 62, 1011–1031 (2002)
J.J. Munoz, U. Galvanetto, P. Robinson, On the numerical simulation of fatigue driven delamination with interface elements. Int. J. Fatigue 28, 1136–1146 (2006)MATH
J.A. Nairn, Energy release rate analysis for adhesive and laminate double cantilever beam specimens emphasizing the effect of residual stresses. Int. J. Adhes. Adhes. 20, 59–70 (2000)
E.P. O’Brien, T.C. Ward, S. Guo, D.A. Dillard, Strain energy release rates of a pressure sensitive adhesive measured by the shaft-loaded blister test. J. Adhes. 79, 69–97 (2003)
A. Öchsner, Special Numerical Techniques, in Handbook of Adhesion Technology, ed. by L.M.F. da Silva, A. Öchsner, R.D. Adams (Springer, Heidelberg, 2011)
K.C. Pandya, J.G. Williams, Measurement of cohesive zone parameters in tough polyethylene. Polymer Eng. Sci. 40, 1765–1776 (2000)
S.K. Panigrahi, B. Pradhan, Three dimensional failure analysis and damage propagation behavior of adhesively bonded single lap joints in laminated FRP composites. J. Reinf. Plast. Compos. 26, 183–201 (2007)
T. Pardoen, T. Ferracin, C.M. Landis, F. Delannay, Constraint effects in adhesive joint fracture. J. Mech. Phys. Solids 53, 1951–1983 (2005)MATH
A.B. Pereira, A.B. de Morais, Strength of adhesively bonded stainless steel joints. Int. J. Adhes. Adhes. 23, 315–322 (2003)
Z. Petrossian, M.R. Wisnom, Prediction of delamination initiation and growth from discontinuous plies using interface elements. Compos. Part A 29, 503–515 (1998)
A.M.G. Pinto, A.G. Magalhães, R.D.S.G. Campilho, M.F.S.F. de Moura, A.P.M. Baptista, Single-lap joints of similar and dissimilar adherends bonded with an acrylic adhesive. J. Adhes. 85, 351–376 (2009)
V.P. Premchand, K.S. Sajikumar, Fracture analysis in adhesive bonded joints with centre crack. NCTT09 10th national conference on technological trends, Trivandrum, India (2009)
M. Quaresimin, M. Ricotta, Life prediction of bonded joints in composite materials. Int. J. Fatigue 28, 1166–1176 (2006)MATH
R.S. Raghava, R. Cadell, G.S.Y. Yeh, The macroscopic yield behavior of polymers. J. Mater. Sci. 8, 225–232 (1973)
P.G.S. Raghavan, A continuum damage mechanics model for unidirectional composites undergoing interfacial de-bonding. Mech. Mater. 37, 955–977 (2005)
J.R. Rice, G.F. Rosengren, Plane strain deformation near a crack tip in a powerlaw hardening material. J. Mech. Phys. Solids 16, 1–12 (1968)MATH
M. Ridha, V.B.C. Tan, T.E. Tay, Traction-separation laws for progressive failure of a bonded scarf repair of composite panel. Compos. Struct. 93, 1239–1245 (2010)
P. Robinson, U. Galvanetto, D. Tumino, G. Bellucci, D. Violeau, Numerical simulation of fatigue-driven delamination using interface elements. Int. J. Numer. Methods Eng. 63, 1824–1848 (2005)MATH
K.L. Roe, T. Siegmund, An irreversible cohesive zone model for interface fatigue crack growth simulation. Eng. Fract. Mech. 70, 209–232 (2003)
M. Sabsabi, E. Giner, F.J. Fuenmayor, Experimental fatigue testing of a fretting complete contact and numerical life correlation using X-FEM. Int. J. Fatigue 33, 811–822 (2011)
N.K. Salgado, M.H. Aliabad, The boundary element analysis of cracked stiffened sheets, renforced by adhesively bonded patches. Int. J. Numer. Meth. Eng. 42, 195–217 (1998)MATH
E.M. Sampaio, F.L. Bastian, H.S.C. Mattos, A simple continuum damage model for adhesively bonded butt joints. Mech. Res. Commun. 31, 443–449 (2004)MATH
C. Schuecker, B.D. Davidson, Effect of friction on the perceived mode II delamination toughness from three and four point bend end notched flexure tests. ASTM STP 1383, 334–344 (2000)
K. Shahin, F. Taheri, The strain energy release rates in adhesively bonded balanced and unbalanced specimens and lap joints. Int. J. Solids Struct. 45, 6284–6300 (2008)MATH
V. Shenoy, I.A. Ashcroft, G.W. Critchlow, A.D. Crocombe, M.M. Abdel Wahab, An investigation into crack initiation and propagation behaviour of bonded single-lap joints using backface strain. Int. J. Adhes. Adhes. 29, 361–371 (2009)
V. Shenoy, I.A. Ashcroft, G.W. Critchlow, A.D. Crocombe, Unified methodology for the prediction of the fatigue behavior of adhesively bonded joints. Int. J. Fatigue 32, 1278–1288 (2010a)
V. Shenoy, I.A. Ashcroft, G.W. Critchlow, A.D. Crocombe, Fracture mechanics and damage mechanics based fatigue lifetime prediction of adhesively bonded joints subjected to variable amplitude fatigue. Eng. Fract. Mech. 77, 1073–1090 (2010b)
A.G. Solana, A.D. Crocombe, I.A. Ashcroft, Fatigue life and backface strain predictions in adhesively bonded joints. Int. J. Adhes. Adhes. 30, 36–42 (2010)
S.H. Song, G.H. Paulino, W.G. Buttlar, A bilinear cohesive zone model tailored for fracture of asphalt concrete considering viscoelastic bulk material. Eng. Fract. Mech. 73, 2829–2848 (2006)
B.F. Sørensen, Cohesive law and notch sensitivity of adhesive joints. Acta Mater. 50, 1053–1061 (2002)
B.F. Sørensen, T.K. Jacobsen, Determination of cohesive laws by the J integral approach. Eng. Fract. Mech. 70, 1841–1858 (2003)
S. Srinivas (1975) Analysis of bonded joints. NASA Technical Note, NASA TN D-7855
N. Sukumar, J.H. Prevost, Modeling quasi-static crack growth with the extended finite element method part i: computer implementation. Int. J. Solids Struct. 40, 7513–7537 (2003)MATH
N. Sukumar, N. Moës, B. Moran, T. Belytschko, Extended finite element method for three-dimensional crack modeling. Int. J. Numer. Meth. Eng. 48, 1549–1570 (2000)MATH
V. Tamuzs, S. Tarasovs, U. Vilks, Delamination properties of translaminar-reinforced composites. Compos. Sci. Technol. 63, 1423–1431 (2003)
D. Tumino, F. Cappello, Simulation of fatigue delamination growth in composites with different mode mixtures. J. Compos. Mater. 41, 2415–2441 (2007)
M.J. Turner, R.W. Clough, H.C. Martin, J.L. Topp, Stiffness and deflection analysis of complex structures. J. Aerosp. Sci. 23, 805–823 (1956)MATH
A. Turon, J. Costa, P.P. Camanho, C.G. Dàvila, Simulation of delamination in composites under high-cycle fatigue. Compos. Part A 38, 2270–2282 (2007a)
A. Turon, C.G. Dávila, P.P. Camanho, J. Costa, An engineering solution for mesh size effects in the simulation of delamination using cohesive zone models. Eng. Fract. Mech. 74, 1665–1682 (2007b)
V. Tvergaard, J.W. Hutchinson, The relation between crack growth resistance and fracture process parameters in elastic-plastic solids. J. Mech. Phys. Solids 40, 1377–1397 (1992)MATH
V. Tvergaard, J.W. Hutchinson, The influence of plasticity on the mixed-mode interface toughness. J. Mech. Phys. Solids 41, 1119–1135 (1993)MATH
V.I. Tvergaard, A. Needleman, Analysis of cup one fracture in round tensile bar. Acta Metall. 32, 157–169 (1984)
M. Vable, Stress analysis of bonded joints by boundary element method, in Modeling of Adhesively Bonded Joints, ed. by L.F.M. da Silva, A. Öchsner (Springer, Heidelberg, 2008)
M. Vable, J.R. Maddi, Boundary element analysis of adhesively bonded joints. Int. J. Adhes. Adhes. 26, 133–144 (2006)
O. Volkersen, Die nietkraftoerteilung in zubeanspruchten nietverbindungen mit konstanten loschonquerschnitten. Luftfahrtforschung 15, 41–47 (1938)
G.Z. Voyiadjis, P.I. Kattan, Damage Mechanics (Marcell Dekker, New York, 2005)MATH
M.M.A. Wahab, I.A. Ashcroft, A.D. Crocombe, S.J. Shaw, Prediction of fatigue thresholds in adhesively bonded joints using damage mechanics and fracture mechanics. J. Adhes. Sci. Technol. 15, 763–781 (2001)
M.M.A. Wahab, I.A. Ashcroft, A.D. Crocombe, P.A. Smith, Numerical prediction of fatigue crack propagation lifetime in adhesively bonded structures. Int. J. Fatigue 24, 705–709 (2002)MATH
R.X. Wang, J. Cui, A.N. Sinclair, J.K. Spelt, Strength of adhesive joints with adherend yielding: I. Analytical model. J. Adhes. 79, 23–48 (2003)
Y. Wei, J.W. Hutchinson, Nonlinear delamination mechanics for thin films. J. Mech. Phys. Solids 45, 1137–1159 (1997)MathSciNet
Y. Wei, J.W. Hutchinson, Interface strength, work of adhesion and plasticity in the peel test. Int. J. Fract. 93, 315–333 (1999)
P.H. Wen, M.H. Aliabadi, A. Young, Boundary element analysis of flat cracked panels with adhesively bonded patches. Eng. Fract. Mech. 69, 2129–2146 (2002)
P.H. Wen, M.H. Aliabadi, A. Young, Boundary element analysis of curved cracked panels with adhesively bonded patches. Int. J. Numer. Methods Eng. 58, 43–61 (2003)MATH
M.L. Williams, The stresses around a fault or crack in dissimilar media. Bull. Seism. Soc. Am. 49, 199–204 (1959)
D. Xie, A.M. Waas, Discrete cohesive zone model for mixed-mode fracture using finite element analysis. Eng. Fract. Mech. 73, 1783–1796 (2006)
D. Xie, A.G. Salvi, C. Sun, A.M. Waas, A. Caliskan, Discrete cohesive zone model to simulate static fracture in 2D triaxially braided carbon fiber composites. J. Compos. Mater. 40, 2025–2046 (2006)
W. Xu, G. Li, Finite difference three-dimensional solution of stresses in adhesively bonded composite tubular joint subjected to torsion. Int. J. Adhes. Adhes. 30, 191–199 (2010)
Y. Xu, H. Yuan, Computational analysis of mixed-mode fatigue crack growth in quasi-brittle materials using extended finite element methods. Eng. Fract. Mech. 76, 165–181 (2009)
J.Q. Xu, Y.H. Liu, X.G. Wang, Numerical methods for the determination of multiple stress singularities and related stress intensity coefficients. Eng. Fract. Mech. 63, 775–790 (1999)
C. Yan, Y.W. Mai, L. Ye, Effect of bond thickness on fracture behaviour in adhesive joints. J. Adhes. 75, 27–44 (2001a)
C. Yan, Y.W. Mai, Q. Yuan, L. Ye, J. Sun, Effects of substrate materials on fracture toughness measurement in adhesive joints. Int. J. Mech. Sci. 43, 2091–2102 (2001b)MATH
Q.D. Yang, M.D. Thouless, Mixed-mode fracture analyses of plastically deforming adhesive joints. Int. J. Fract. 110, 175–187 (2001)
Q.D. Yang, M.D. Thouless, S.M. Ward, Numerical simulations of adhesively-bonded beams failing with extensive plastic deformation. J. Mech. Phys. Solids 47, 1337–1353 (1999)MATH
Q.D. Yang, M.D. Thouless, S.M. Ward, Analysis of the symmetrical 90º peel test with extensive plastic deformation. J. Adhes. 72, 115–132 (2000)
Q.D. Yang, M.D. Thouless, S.M. Ward, Elastic-plastic mode-II fracture of adhesive joints. Int. J. Solids Struct. 38, 3251–3262 (2001)MATH
H. Yoshihara, Simple estimation of critical stress intensity factors of wood by tests with double cantilever beam and three-point end-notched flexure. Holzforschung 61, 182–189 (2007)MathSciNet
A. Young, D.J. Cartwright, D.P. Rooke, Boundary element method for analysing repair patches on cracked finite sheets. Aeronaut. J. 92, 416–421 (1988)
A. Young, D.P. Rooke, D.J. Cartwright, Analysis of patched and stiffened cracked panels using the boundary element method. Int. J. Solids Struct. 29, 2201–2216 (1992)MATH
X. Zhao, R.D. Adams, L.F.M. da Silva, Single lap joints with rounded adherend corners: Stress and strain analysis. J. Adhes. Sci. Technol. 25, 819–836 (2011a)
X. Zhao, R.D. Adams, L.F.M. da Silva, Single lap joints with rounded adherend corners: experimental results and strength prediction. J. Adhes. Sci. Technol. 25, 837–856 (2011b)
Y. Zhu, K.M. Liechti, K. Ravi-Chandar, Direct extraction of rate-dependent traction-separation laws for polyurea/steel interfaces. Int. J. Solids Struct. 46, 31–51 (2009)
O.C. Zienkiewicz, Y.K. Cheung, The Finite Element Method in Structural and Continuum Mechanics (McGraw-Hill, London, 1967)MATH
O.C. Zienkiewicz, R. Taylor, The Finite Element Method: Vol 2, Solid Mechanics, 5th edn. (Butterworth-Heinemann, Oxford, 2001)
G.P. Zou, K. Shalin, F. Taheri, An analytical solution for the analysis of symmetric composite adhesively bonded joints. Compos. Struct. 65, 499–510 (2004)
Metadata
Title
Advances in Numerical Modelling of Adhesive Joints
Authors
Lucas F. M. da Silva
Raul D. S. G. Campilho
Copyright Year
2012
Publisher
Springer Berlin Heidelberg
Book
Advances in Numerical Modeling of Adhesive Joints

Print ISBN: 978-3-642-23607-5

Electronic ISBN: 978-3-642-23608-2

Copyright Year: 2012

DOI
https://doi.org/10.1007/978-3-642-23608-2_1

Premium Partners

    Image Credits