Top

Journal of Material Cycles and Waste Management

Published in:

23-03-2020 | ORIGINAL ARTICLE

Alite and Belite obtained from the sludge of a paper recycling process

Authors: Crivian Pelisser, Giovana Pelisser, Gustavo Lopes Colpani, Eduardo Roberto Batiston, Luciano Luiz Silva, Márcio Antônio Fiori, Josiane Maria Muneron de Mello

Published in: Journal of Material Cycles and Waste Management | Issue 4/2020

Activate our intelligent search to find suitable subject content or patents.

search-config

AI-assisted search

Off

Abstract

In this work, the feasibility of obtaining Alite and Belite with possible applications in the cement industry from the primary sludge generated by a paper recycling industry in the State of Santa Catarina, Brazil was studied. The effect of the heat treatment on the physical and chemical properties of the primary sludge was studied, when treated at 800 °C, 875 °C and 950 °C, and defined by studies using the dilatometry technique. The treated sludge at these temperatures was characterized by X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), thermogravimetric analysis (TGA), thermal dilatometry (TD), X-ray fluorescence spectroscopy (XRF), surface analysis by the method of Brunauer, Emmett, Teller (BET), scanning electron microscopy (SEM), and energy-dispersive X-ray spectroscopy (EDS). The results showed the appearance of the Alite and Belite phases with different proportions, depending on the temperatures used during the heat treatment processes and with sufficient quality for application in the cement industry, since the optimal condition to obtain Alite is the heat treatment at 950 °C. In addition, the temperatures used were lower than those used in the conventional processes of Alite and Belite.

previous article Integrated anaerobic digestion and photodegradation of slaughterhouse wastewater: Energy analysis and degradation of aromatic compounds

next article Chemical recycling of waste tire in high-temperature organic fluid

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

inform now

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

inform now

Available only for authorised users

Kong L, Hasanbeigi A, Price L (2016) Assessment of emerging energy-efficiency technologies for the pulp and paper industry: a technical review. J Clean Prod 122:5–28

Toczylowska-Mamińska R (2017) Limits and perspectives of pulp and paper industry wastewater treatment—a review. Renew Sustain Energy Rev 78:764–772

Priti A, Mandal K (2019) Review on evolution of municipal solid waste management in India: practices, challenges and policy implications. J Mater Cycles Waste Manag 21:1263–1279

Pokhrel D, Viraraghavan T (2004) Treatment of pulp and paper mill wastewater—a review. Sci Total Environ 333:37–58

Bhatnagar A, Minocha AK, Jeon BH, Park JM, Lee G (2007) Adsorption of orange G dye on paper mill sludge: equilibrium and kinetic modeling. Fresenius Environ Bull 16:99–103

Mongkhonsiri G, Gani R, Malakul P, Assabumrungrat S (2018) Integration of the biorefinery concept for the development of sustainable processes for pulp and paper industry. Comput Chem Eng 1:1–25

Zhang X, Tang D, Jiang G (2013) Synthesis of zeolite NaA at room temperature: the effect of synthesis parameters on crystal size and its size distribution. Adv Powder Technol 24:689–696

Wu QU, Cui Y, Li Q, Sun J (2014) Effective removal of heavy metals from industrial sludge with the aid of a biodegradable chelating ligand GLDA. J Hazard Mater 283:748–754

Pivnenko K, Eriksson E, Astrup TF (2015) Waste paper for recycling: Overview and identification of potentially critical substances. Waste Manag 45:134–142

10.

Gottumukkala LD, Haigh K, Collard FX, Rensburg EV, Görgens J (2016) Opportunities and prospects of biorefinery-based valorisation of pulp and paper sludge. Biores Technol 215:37–49

11.

Chen PC, Chiu MC, Hwong-Wen M (2016) Measuring the reduction limit of repeated recycling and a case study of the paper flow system. J Clean Prod 132:98–107

12.

Ervasti I, Miranda R, Kauranen I (2016) A global, comprehensive review of literature related to paper recycling: a pressing need for a uniform system of terms and definitions. Waste Manag 48:64–71

13.

Koshikawa M, Isogai A (2004) Analyses of incinerated ash of paper sludge: comparison with incinerated ash of municipal solid waste. J Mater Cycles Waste Manag 6:64

14.

Shafeek A, Salah H, Shehata N, Saddek AB (2017) The impact of cooling water types on the cement clinker properties. Egypt J Petrol 27:1–8

15.

Jeong J, Takaoka M, Ichiura H, Oshita K, Fujimori F (2016) Evaluation of metals in the residue of paper sludge after recovery of pulp components using an ionic liquid. J Mater Cycles Waste Manag 18:215–221

16.

Conesa JA, Gálvez A, Fullana A (2008) Decomposition of paper wastes in presence of ceramics and cement raw material. Chemosphere 72:306–311

17.

Pera J, Ambroise J (1998) Pozzolanic properties of metakaolin obtained from paper sludge. ACI Spec Publ 178:1007–1020

18.

Pera J, Amrouz A (1998) Development of highly reactive metakaolin from paper sludge. Adv Cem Based Mater 7:49–56

19.

Yan S, Sagoe-Crentsil K, Shapiro G (2011) Reuse of de-inking sludge from wastepaper recycling in cement mortar products. J Environ Manag 92:2085–2090

20.

Vigil De La Villa R, Frias M, Sánchez De Rojas MI, Vegas I, Garcia R (2007) Mineralogical and morphological changes of calcined paper sludge at different temperatures and retention in furnace. Appl Clay Sci 36:279–286

21.

Rodriguez OL, Vigil De La Villa R, Rojas MIS, Frias M (2009) Novel use of kaolin wastes in blended cements. J Am Ceram Soc 92:2443–2446

22.

Frías M, Rodríguez O, Rojas S (2015) Paper sludge, an environmentally sound alternative source of MK-based cementitious materials. A review. Constr Build Mater 74:37–48

23.

Calace N, Nardi E, Petronio BM, Pietroletti M, Tosti G (2003) Metal ion removal from water by sorption on paper mill sludge. Chemosphere 51:797–803

24.

Modolo R, Ferreira VM, Machado LM, Rodrigues M, Coelho I (2011) Construction materials as a waste management solution for cellulose sludge. Waste Manag 31:370–377

25.

Gomes D, Domingues L, Gama M (2016) Valorizing recycled paper sludge by a bioethanol production process with cellulase recycling. Biores Technol 216:637–644

26.

Orlandi G, Cavasotto J, Machado Junior FRS, Colpani GL, Dal Magro J, Dalcanton F, Fiori MA, Mello JMM (2017) An adsorbent with a high adsorption capacity obtained from the cellulose sludge of industrial residues. Chemosphere 169:171–180

27.

Cademartori PHG, Claro FC, Marinho NP, Zanoni PRS, Magalhães WLE (2017) Co-production of thermoplastic composites with solid residue from enzymatic hydrolysis of recycled paper sludge. J Clean Prod 162:27–33

28.

Vieira CMF, Pinheiro RM, Rodriguez RJS, Candido VS, Monteiro SN (2016) Clay bricks added with effluent sludge from paper industry: technical, economical and environmental benefits. Appl Clay Sci 133:753–759

29.

Buruberri LH, Seabra MP, Labrincha JA (2015) Preparation of clinker from paper pulp industry wastes. J Hazard Mater 286:252–260

30.

Oliveira KA, Nazário BI, Oliveira APN, Hotza D, Pereira FR (2017) Industrial wastes as alternative mineral addition in portland cement and as aggregate in coating mortars. Mater Res 1:1–7

31.

Vashistha P, Singh SK, Dutt D, Kumar V (2019) Sustainable utilization of paper mill solid wastes via synthesis of nano silica for production of belite based clinker. J Clean Prod 224(1):557–565

32.

Xiaolei L, Zhengmao Y, Shuxian W, Peng D, Chuanhai L, Xin C (2018) Study on the preparation and properties of Belite-ye’elimite-Alite cement. Constr Build Mater 182:399–405

33.

Poulsen SL, Kocaba V, Saouˆt GL, Jakobsen HJ, Scrivener KL, Skibsted J (2009) Improved quantification of Alite and Belite in anhydrous Portland cements by 29Si MAS NMR: Effects of paramagnetic ions. Solid State Nucl Magn Reson 6:32–44

34.

Choudhary HK, Anupama AV, Kumar R, Panzi ME, Matteppanavar S, Sherikar BN, Sahoo B (2015) Observation of phase transformations in cement during hydration. Constr Build Mater 101:122–129

35.

Salas DA, Ramirez AD, Rodríguez CR, Petroche DM, Boero AJ, Duque-Rivera J (2016) Environmental Impacts, life cycle assessment and potential improvement measures for cement production: a literature review. J Clean Prod 113:114–122

36.

Boughanmi S, Labidi I, Megriche A, Maaoui ME, Nonat A (2018) Natural fluorapatite as a raw material for Portland clínquer. Cem Concr Res 105:72–80

37.

Da Costa EB, Nobre TRS, Guerreiro AQ, Kirchheim AP, Mancio M (2013) Portland cement clinker with reduced environmental impact. Ambiente Construído 13:75–86

38.

Barbosa W, Portella KF (2019) Síntese e caracterização das fases minerais C3S, C2S, C3A e C4AF para utilização em cimento tipo Portland (Synthesis and characterization of mineral phases C3S, C2S, C3A and C4AF for use in Portland cement). Cerâmica 65:54–62

39.

Mehta PK, Monteiro PJM (2008) Evolução em tecnologia do concreto: concreto, microestrutura, propriedades e materiais, 3rd edn. Instituto Brasileiro do Concreto Ibracon, São Paulo (Cha. 12)

40.

Fang S, Yu Z, Ma X, Lin Y, Chen L, Liao Y (2017) Analysis of catalytic pyrolysis of municipal solid waste and paper sludge using TG-FTIR, PyGC/MS and DAEM (distributed activation energy model). Energy 143:517–532

41.

Furlani AE, Bruckner S, Maschio S (2008) Production and characterization of sintered ceramics from paper mill sludge and glass cullet. Chemosphere 71:83–89

42.

Bernal SA, Provis JL, Walkley B, Nicolas RS, Gehman JD, Brice DG, Kilcullen AR, Duxson P, Van Deventer JSJ (2013) Gel nanostructure in alkali-activated binders based on slag and fly ash, and effects of accelerated carbonation. Cem Concr Res 53:127–144

43.

He M, Cho BU, Won JM (2016) Effect of precipitated calcium carbonate - Cellulose nanofibrils composite filler on paper properties. Carbohyd Polym 136:820–825

44.

Sadik C, Amrani I, Albizanea A (2014) Recent advances in silica–alumina refractory: a review. J Asian Ceram Soc 2:83–96

45.

Mostofinejad D, Hosseini S, Nosouhian F, Ozbakkaloglu T, Tehrani BN (2020) Durability of concrete containing recycled concrete coarse and fine aggregates and milled waste glass in magnesium sulfate environment. J Build Eng 29:101182

46.

Li X, Xu W, Wang S, Tang M, Shen X (2014) Effect of SO₃ and MgO on Portland cement clinker: formation of clinker phases and Alite polymorphism. Constr Build Mater 58:182–192

47.

Gartner E, Sui T (2017) Alternative cement clinkers. Cem Concr Res 91:24–37

48.

Silverstein RM, Webster FX, Kiemle DJ (2007) Identificação espectrométrica de compostos orgânicos, 7th edn. LTC, Rio de Janeiro, p 29

49.

Veluchamy C, Kalamdhad AS (2017) Enhancement of hydrolysis of lignocellulose waste pulp and paper mill sludge through different heating processes on thermal pretreatment. J Clean Prod 168:219–226

50.

Omari MMH, Rashid IS, Qinna NA, Jaber AM, Badwan AA (2016) Chapter two—calcium carbonate. In: Profiles of drug substances, excipients and related methodology, vol 41, pp 31–132. https://doi.org/10.1016/bs.podrm.2015.11.003

51.

Goel G, Kalamdhad AS (2017) An investigation on use of paper mill sludge in brick manufacturing. Constr Build Mater 148:334–343

52.

Huo Z, Xu X, Lv A, Song J, He M, Li Z, Wang Q, Yan L, Li Y (2013) Thermal study of nap zeolite with diferent morphologies. J Therm Anal Calorim 111:365–369

53.

Wesolowski M (1984) Thermal decomposition of talc: a review. Thermochem Acta 78:395–421

54.

Li G, Li Z, Ma H (2013) Comprehensive use of dolomite-talc ore to prepare talc, nano-MgO and lightweight CaCO₃ using an acid leaching method. Appl Clay Sci 86:145–152

55.

Mahfouz M, Miranda MS, Oliveira MBR, Cassiola F, Rodrigues FA (2008) Biogenic cements from rice hull ash doped with aluminum and iron. Chemosphere 73:832–836

56.

Costa EB, Rodríguez ED, Bernal SA, Provis JL, Gobbo LA (2016) Production and hydration of calcium sulfoaluminate-belite cements derived from aluminium anodising sludge. Constr Build Mater 122(2016):373–383

57.

El Gendy A, Khiarib R, Bettaiebb F, Marlinc N, Dufresnec A (2014) Preparation and application of chemically modified kaolin as fillers in Egyptian kraft bagasse pulp. Appl Clay Sci 101:626–631

58.

Kowalczyk P, Balzer C, Reichenauer G, Terzyk AP, Gauden PA, Neimark AV (2016) Using in-situ adsorption dilatometry for assessment of micropore size distribution in monolithic carbons. Carbon 103:263–272

59.

Ludwig HM, Zhang W (2015) Research review of cement clinker chemistry. Cem Concr Res 78:24–37

60.

Gandolfi MG, Van Landuyt K, Taddei P, Modena E, Van Meerbeek B, Prati C (2010) Environmental scanning electron microscopy connected with energy dispersive x-ray analysis and Raman techniques to study ProRoot mineral trioxide aggregate and calcium silicate cements in wet conditions and in real time. Basic Res Technol 36:851–857

Title: Alite and Belite obtained from the sludge of a paper recycling process
Authors: Crivian Pelisser
Giovana Pelisser
Gustavo Lopes Colpani
Eduardo Roberto Batiston
Luciano Luiz Silva
Márcio Antônio Fiori
Josiane Maria Muneron de Mello
Publication date: 23-03-2020
Publisher: Springer Japan
Published in: Journal of Material Cycles and Waste Management / Issue 4/2020
Print ISSN: 1438-4957
Electronic ISSN: 1611-8227
DOI: https://doi.org/10.1007/s10163-020-01016-3

Springer Professional

Abstract

Please log in to get access to your license.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Other articles of this Issue 4/2020

Application of micro-scale correlation analysis to estimate metal speciation and the matrix in municipal solid waste incineration fly ash

Modeling methane potential yield and chemical composition of bedded pack barn cattle manure: Influence of cattle, season, growth stage, its retention time and particle distribution

Principles and methods of bio detoxification of cyanide contaminants

Biofuel production from pyrolysis of waste cooking oil fried sludge in a fixed bed

Low-toxic zeolite fabricated from municipal solid waste incineration fly ash via microwave-assisted hydrothermal process with fusion pretreatment

Conversion of waste algae from biodiesel production to valuable gas, liquid and solid products