Skip to main content
main-content
Top

Journal

Arabian Journal for Science and Engineering

Arabian Journal for Science and Engineering 12/2021

Issue 12/2021

Table of Contents ( 82 Articles )

10-07-2021 | Review--Mechanical Engineering | Issue 12/2021

Review on Spray-Assisted Solar Desalination: Concept, Performance and Modeling

Anil Kumar, Ravi Kant, Samsher

02-08-2021 | Review--Mechanical Engineering | Issue 12/2021

Review of Natural Convection Within Various Shapes of Enclosures

Ammar Abdulkadhim, Isam Mejbel Abed, Nejla Mahjoub Said

02-08-2021 | Review-Mechanical Engineering | Issue 12/2021

Recent Advancements of Micro-Lattice Structures: Application, Manufacturing Methods, Mechanical Properties, Topologies and Challenges

SakshiKokil-Shah, Anirban Sur, Sanjay Darvekar, Mohanish Shah

23-03-2021 | Research Article-Mechanical Engineering | Issue 12/2021

Effect of Spherical Joint Symmetry Axis Orientation on the Kinematic Performance of Lower Mobility Parallel Manipulators

H. M. El-Wehishy, M. Nemat-Alla, R. F. Abo-Shanab

24-03-2021 | Research Article-Mechanical Engineering | Issue 12/2021

Shape and Orientation Effect on Natural Convection Around a Heated Vertical Cone, Which Loses Heat from All Its Surfaces

Shibajee Behera, Sukanta K. Dash

28-03-2021 | Research Article-Mechanical Engineering | Issue 12/2021

Energy and Exergy Analyses of a Refrigerant Pump Integrated Dual-Ejector Refrigeration (DER) System

Barış Kavasoğulları, Ertuğrul Cihan, Hasan Demir

08-04-2021 | Research Article-Mechanical Engineering | Issue 12/2021

Enhancing the Productivity of Tubular Solar Still by Using the Phase Change Material

Qahtan A. Abed, Dhafer M. Hachim

17-04-2021 | Research Article-Mechanical Engineering | Issue 12/2021

Effect of Horizontal Plate Length on Cutting Resistance of Blade Under Different Cutting Depths in a Sandy Soil

Yutian He, Jianbing Zhang, Longlong Guo, Cuihong Zhang, Pengmin Lu

20-04-2021 | Research Article-Mechanical Engineering | Issue 12/2021

Multi-variable Optimization of the Shot Blasting of Additively Manufactured AlSi10Mg Plates for Surface Roughness Using Response Surface Methodology

Navdeep Minhas, Ankit Thakur, Sumit Mehlwal, Rajeev Verma, Vishal S. Sharma, Varun Sharma

22-04-2021 | Research Article-Mechanical Engineering | Issue 12/2021

Three-Dimensional CFD Modeling of Serpentine Flow Field Configurations for PEM Fuel Cell Performance

Venkateswarlu Velisala, Gandhi Pullagura, Naresh Yarramsetty, Srinivas Vadapalli, Murali Krishna Boni, Kiran Kumar Gorantla

23-04-2021 | Research Article-Mechanical Engineering | Issue 12/2021

Experimental Comparison of Response for Healthy and Cracked Overhung Rotor System

Rohit Tamrakar, Narain Das Mittal, Raj Kumar Singh

26-04-2021 | Research Article-Mechanical Engineering | Issue 12/2021

Optimization of Parameters Affecting the Performance and Emissions of a Spark Ignition Engine Fueled with n-Pentanol/Gasoline Blends Using Taguchi Method

Samet Uslu, Hayri Yaman, Murat Kadir Yesilyurt

29-04-2021 | Research Article-Mechanical Engineering | Issue 12/2021

Experimental Researches of Turning Hardened 9CrSi Alloy Tool Steel with Laser-Assisted Machining

Nguyen Thanh-Huan, Nguyen Duc-Toan

04-05-2021 | Research Article-Mechanical Engineering | Issue 12/2021

A New Method for Measuring the Attitude and Straightness of Hydraulic Support Groups Based on Point Clouds

Binbin Wang, Jiacheng Xie, Xuewen Wang, Shuguang Liu, Yimeng Liu

05-05-2021 | Research Article-Mechanical Engineering | Issue 12/2021

Sustainable Machining of Hastelloy in EDM Using Nanoparticle-Infused Biodegradable Dielectric Fluid

N. Nagabhooshanam, S. Baskar, K. Anitha, S. Arumugam

18-05-2021 | Research Article-Mechanical Engineering | Issue 12/2021

Assessing and Comparing the Characteristics of CI Engine Powered by Biodiesel–Diesel and Biodiesel–Kerosene Blends

E. A. Elsharkawy, M. M. Abou Al-sood, M. K. El-Fakharany, M. Ahmed

19-05-2021 | Research Article-Mechanical Engineering | Issue 12/2021

A New Optimization Technique in Examining the Machinability of Sverker 21 Steel: Gray Relational Analysis-Based Genetic Algorithm

Cetin Ozay, Mehmet Altug, Hasan Ballikaya

20-05-2021 | Research Article-Mechanical Engineering | Issue 12/2021

Implementation of Stochastic Optimization Method-Assisted Radial Basis Neural Network for Transport Phenomenon in Non-Newtonian Third-Grade Fluids: Assessment of Five Optimization Tools

Vijay K. Mishra, Sumanta Chaudhuri

23-05-2021 | Research Article-Mechanical Engineering | Issue 12/2021

A Multistage Cutting Tool Fault Diagnosis Algorithm for the Involute form Cutter Using Cutting Force and Vibration Signals Spectrum Imaging and Convolutional Neural Networks

Gurkan Kucukyildiz, Habibe Gursoy Demir

24-05-2021 | Research Article-Mechanical Engineering | Issue 12/2021

Optimization of Injection Molding Process of Transparent Complex Multi-Cavity Parts Based on Kriging Model and Various Optimization Techniques

Sai Li, Xi Ying Fan, Yong Huan Guo, Xin Liu, Hai Yue Huang, Yan Li Cao, Lu Lu Li

25-05-2021 | Research Article-Mechanical Engineering | Issue 12/2021

Investigation of Texture and Process Optimization for 3xxx Alloys with Different Magnesium Ratios

Ali Ulas Malcioglu, Mediha İpek

25-05-2021 | Research Article-Mechanical Engineering | Issue 12/2021

Investigation of Damping Characteristics on Copper-Based Shape Memory Alloy Frictional Damper in Boring Process

Chockalingam Singaravelu, Prasannavenkadesan Varatharajan, Ganesan Ramu, Karthikeyan Alagappan

27-05-2021 | Research Article-Mechanical Engineering | Issue 12/2021

Supersonic Several Bells Design of Minimum Length Nozzle Contours for More Altitudes Level Adaptations

Toufik Yahiaoui, Toufik Zebbiche

06-06-2021 | Research Article-Mechanical Engineering | Issue 12/2021

Realistic Availability Assessment of Energy System Behavior Patterns by Monte Carlo Method

Mahyar Momen, Ali Behbahaninia

07-06-2021 | Research Article-Mechanical Engineering | Issue 12/2021

Numerical Analysis of the Combustion in Micro Gas Turbine with Methane/Biogas Fuels

Xiaoyu Chen, Weiguo Zhou, Yunfei Jia, Junying Tang

08-06-2021 | Research Article-Mechanical Engineering | Issue 12/2021

Process Parameters Effect Investigations on Viscosity of Water-ethylene Glycol-based α-alumina Nanofluids: An Ultrasonic Experimental and Statistical Approach

R. Prakash, L. Chilambarasan, K. Rajkumar

09-06-2021 | Research Article-Mechanical Engineering | Issue 12/2021

Comparison of Coupled Eulerian–Lagrangian and Coupled Smoothed Particle Hydrodynamics–Lagrangian in Fluid–Structure Interaction Applied to Metal Cutting

Haithem Khochtali, Ikram BenBelgacem, Farhat Zemzemi, Wacef Bensalem

09-06-2021 | Research Article-Mechanical Engineering | Issue 12/2021

Application of Higher-Order Alcohols (1-Hexanol-C6 and 1-Heptanol-C7) in a Spark-Ignition Engine: Analysis and Assessment

Hayri Yaman, Battal Doğan, Murat Kadir Yeşilyurt, Derviş Erol

10-06-2021 | Research Article-Mechanical Engineering | Issue 12/2021

Numerical Investigation on the Influence of Geometrical Parameters on the Aerodynamic Performance of a Small-Scale Ducted Fans System

Chengxiang Zhu, Zhancang Hu, Zejun Cai, Junning Sun, Tianyang Wang, Zhenqi Sun, Yancheng You

11-06-2021 | Research Article-Mechanical Engineering | Issue 12/2021

Dry Sliding Wear Behaviour of T6-Aluminium Alloy Composites Compared with Existing Aircraft Brake Pads

P. Ashwath, M. Anthony Xavior

12-06-2021 | Research Article-Mechanical Engineering | Issue 12/2021

Influence of Friction Stir Welding Parameters on Dissimilar Joints AA6061-T6 and AA5052-H32

S. Balamurugan, K. Jayakumar, K. Subbaiah

12-06-2021 | Research Article-Mechanical Engineering | Issue 12/2021

Detection of Local Gear Tooth Defects on a Multistage Gearbox Operating Under Fluctuating Speeds Using DWT and EMD Analysis

Vamsi Inturi, A. S. Pratyush, G. R. Sabareesh

18-06-2021 | Research Article-Mechanical Engineering | Issue 12/2021

Performance Assessment of a Refrigeration System Charged with Different Refrigerants Using Infrared Image Processing Techniques

Ferzan Katircioğlu, Zafer Cingiz, Yusuf Çay, Ali Etem Gürel, Ahmet Kolip

19-06-2021 | Research Article-Mechanical Engineering | Issue 12/2021

Flow Boiling Performance Analysis of Copper–Titanium Oxide Micro-/Nanostructured Surfaces Developed by Single-Step Forced Convection Electrodeposition Technique

Sanjay Kumar Gupta, Rahul Dev Misra

23-06-2021 | Research Article-Mechanical Engineering | Issue 12/2021

Prediction of Dry Sliding Wear Response of AlMg1SiCu/Silicon Carbide/Molybdenum Disulphide Hybrid Composites Using Adaptive Neuro-Fuzzy Inference System (ANFIS) and Response Surface Methodology (RSM)

K. Ragupathy, C. Velmurugan, D. S. Ebenezer Jacob Dhas, N. Senthilkumar, K. Leo Dev Wins

23-06-2021 | Research Article-Mechanical Engineering | Issue 12/2021

Enhancement of Ceramic Slurry Rheology in Investment Casting Process

Sarojrani Pattnaik, Mihir Kumar Sutar

23-06-2021 | Research Article-Mechanical Engineering | Issue 12/2021

Assessment of Wind Fin Performance Run by Mixed Flows: Experimental and Numerical Investigation

Hasanain A. Abdul Wahhab, Sattar Aljabair, Sadoon K. Ayed

23-06-2021 | Research Article-Mechanical Engineering | Issue 12/2021

Enhancement of Mechanical Properties of 6061/6082 Dissimilar Aluminium Alloys Through Ultrasonic-Assisted Cold Metal Transfer Welding

Yashwant Koli, N. Yuvaraj, S. Aravindan, Vipin

23-06-2021 | Research Article-Mechanical Engineering | Issue 12/2021

Investigation of Ring Rolling Key Parameters for Decreasing Geometrical Ring Defects by 3D Finite Element and Experiments

Hosein Zayadi, Ali Parvizi, Hamid Reza Farahmand, Davood Rahmatabadi

24-06-2021 | Research Article-Mechanical Engineering | Issue 12/2021

On Designing Mixed Nonparametric Control Chart for Monitoring the Manufacturing Processes

Saber Ali, Zameer Abbas, Hafiz Zafar Nazir, Muhammad Riaz, Xingfa Zhang, Yuan Li

25-06-2021 | Research Article-Mechanical Engineering | Issue 12/2021

Experimental Investigation of Roughness Transfer with Skin-Pass Rolling to High Strength Low Alloy (HSLA) Material

Batuhan Özakın, Naci Kurgan

27-06-2021 | Research Article-Mechanical Engineering | Issue 12/2021

Comparison of the Performance of the Methods Used to Find the Weibull Parameters at Different Heights

Yusuf Alper Kaplan

27-06-2021 | Research Article-Mechanical Engineering | Issue 12/2021

Impacts of Viscous Dissipation and Thermal Radiation on Rabinowitsch Fluid Model Obeying Peristaltic Mechanism with Wall Properties

M. Y. Rafiq, Z. Abbas

30-06-2021 | Research Article-Mechanical Engineering | Issue 12/2021

Torsional Vibration for Rolling Mill with the Drive System Shaft Axis Deviations

Yan Peng, Jinxing Cui, Jianliang Sun, Ming Zhang

02-07-2021 | Research Article-Mechanical Engineering | Issue 12/2021

Jib Vibration and Payload Swing of Tower Cranes in the Case of Trolley Motion

Runhui Feng, En Zhang, Mingxiao Dong

02-07-2021 | Research Article-Mechanical Engineering | Issue 12/2021

Experimental Evaluation of a New Compact Design Multistage Water-Gap Membrane Distillation Desalination System

Suhaib M. Alawad, Atia E. Khalifa, Mohamed A. Antar, Mohamed A. Abido

05-07-2021 | Research Article-Mechanical Engineering | Issue 12/2021

SPIF Manufacture of a Dome Part Made of AA1060-H14 Aluminum Alloy Using CNC Lathe Machine: Numerical and Experimental Investigations

L. Ben Said, A. Bouhamed, M. Wali, B. Ayadi, S. A. Betrouni, H. Hajji, F. Dammak

05-07-2021 | Research Article-Mechanical Engineering | Issue 12/2021

Detection of Gear Wear and Faults in Spur Gear Systems Using Statistical Parameters and Univariate Statistical Process Control Charts

Sinan Maraş, Hakan Arslan, Burak Birgören

07-07-2021 | Research Article-Mechanical Engineering | Issue 12/2021

Multi-objective Optimization of Thermodynamic and Economic Performances of Natural Refrigerants for Cascade Refrigeration

Kaushalendra Kumar Singh, Rajesh Kumar, Anjana Gupta

07-07-2021 | Research Article-Mechanical Engineering | Issue 12/2021

Flow Field Structure, Characteristics of Thermo-Hydraulic and Heat Transfer Performance Analysis in a Three Dimensions Circular Tube with Different Ball Turbulators Configurations

Ahmed Ramadhan Al-Obaidi, Issa Chaer

10-07-2021 | Research Article-Mechanical Engineering | Issue 12/2021

Effect of Shrinkage in Convective Drying of Spherical Food Material: A Numerical Solution

Mukul Kumar Goyal, Saurabh Avinash Ture, V. P. Chandramohan

13-07-2021 | Research Article-Mechanical Engineering | Issue 12/2021

Experimental and Numerical Study of Cutting Force Performance of Wave Form End Mills on Gray Cast Iron

Kutay Aydın, Ali Akgün, Çağlar Yavaş, Arif Gök, Ulvi Şeker

13-07-2021 | Research Article-Mechanical Engineering | Issue 12/2021

Modeling of Time-Varying Surface Roughness Considering Wear Overlap Per Tooth in Ball End Finish Milling

De-Jun Cheng, Hong-Jie Quan, Su-Jin Kim, Sheng-Wen Zhang, Chun-Yan Zhang

14-07-2021 | Research Article-Mechanical Engineering | Issue 12/2021

Motion Control of a Spatial Elastic Manipulator in the Presence of Measurement Noises

Sinan Kilicaslan, S. Kemal Ider, M. Kemal Ozgoren

14-07-2021 | Research Article-Mechanical Engineering | Issue 12/2021

Crushed Rubber from Used Tires for Thermal Insulation of Walls and Flat Roofs: Modeling, Validation and Comparison with Conventional Technology

Ubiraci Silva Nascimento, Kamal Abdel Radi Ismail, Fatima A. M. Lino, Cláudia R. E. S. Nóbrega

15-07-2021 | Research Article-Mechanical Engineering | Issue 12/2021

Computational Erosion Wear Model Validation of Particulate Flow Through Mitre Pipe Bend

Om Parkash, Arvind kumar, Basant Singh Sikarwar

16-07-2021 | Research Article-Mechanical Engineering | Issue 12/2021

Theoretical Exploration of Thermal Transportation with Lorentz Force for Fourth-Grade Fluid Model Obeying Peristaltic Mechanism

M. Y. Rafiq, Zaheer Abbas, Jafar Hasnain

17-07-2021 | Research Article-Mechanical Engineering | Issue 12/2021

Boundary layer flow of magneto-nanomicropolar liquid over an exponentially elongated porous plate with Joule heating and viscous heating: a numerical study

Puneet Rana, B. Mahanthesh, Kottakkaran Sooppy Nisar, K. Swain, Manisha Devi

17-07-2021 | Research Article-Mechanical Engineering | Issue 12/2021

Engineering of Novel Fe-Based Bulk Metallic Glasses Using a Machine Learning-Based Approach

Tzu-Chia Chen, Rajiman Rajiman, Marischa Elveny, John William Grimaldo Guerrero, Adedoyin Isola Lawal, Ngakan Ketut Acwin Dwijendra, Aravindhan Surendar, Svetlana Dmitrievna Danshina, Yu Zhu

25-07-2021 | Research Article-Mechanical Engineering | Issue 12/2021

Impact of Inclined Lorentz Force and Schmidt Number on Chemically Reactive Newtonian Fluid Flow on a Stretchable Surface When Stefan Blowing and Thermal Radiation are Significant

U. S. Mahabaleshwar, T. Anusha, P. H. Sakanaka, Suvanjan Bhattacharyya

26-07-2021 | Research Article-Mechanical Engineering | Issue 12/2021

Effect of Dual Particle Size Corundum Particles on the Tribological Properties of LM30 Aluminium Alloy Composites for Brake Rotor Applications

Vikasdeep Singh Mann, O. P. Pandey

26-07-2021 | Research Article-Mechanical Engineering | Issue 12/2021

Development of a New Cost Performance Index (CPI) for Selecting the Most Suitable Wire Electrode in Wire-EDM Machining

Ahmed A. D. Sarhan, Ibrahem Maher, M. Hamdi

26-07-2021 | Research Article-Mechanical Engineering | Issue 12/2021

Investigating the Mechanical Properties of Polyvinyl Alcohol Nanofibers Based on Aligned and Random Orientations

Iraj Rezaei, Ali Sadeghi

27-07-2021 | Research Article-Mechanical Engineering | Issue 12/2021

Evaluation of Cell Parameter Variation on Energy Absorption Characteristic of Thermoplastic Honeycomb Sandwich Structure

Santosh Kumar Sahu, Nitesh Dhar Badgayan, Sutanu Samanta, P. S. Rama Sreekanth

31-07-2021 | Research Article-Mechanical Engineering | Issue 12/2021

A Study on Cost-Effective Electric Vehicle Charging Infrastructure in India Through Open Access Power Procurement

Sajan Jerome, M. Udayakumar

03-08-2021 | Research Article-Mechanical Engineering | Issue 12/2021

Experimental Verification of Numerical Computation with Evolved Material Property Model and Sensitivity Analysis on WAAM Distortion using P-GMAW

Keval P. Prajadhiana, Yupiter H. P. Manurung, Mohd Shahriman Adenan, Mohamed Ackiel Mohamed, Alexander Bauer

03-08-2021 | Research Article-Mechanical Engineering | Issue 12/2021

Determination of Warm Deep Drawing Behavior of DP590 Steel Using Numerical Modeling and Experimental Process Window

Sandeep Pandre, Ayush Morchhale, Nitin Kotkunde, Swadesh Kumar Singh, Navneet Khanna, Ambuj Saxena

05-08-2021 | Research Article-Mechanical Engineering | Issue 12/2021

Numerical Simulation of Thermal and Mass Behaviors During Pyrolysis Homogeneous Reaction Within a Screw Reactor

Amal Masmoudi, Moez Hammami, Mounir Baccar

09-08-2021 | Research Article-Mechanical Engineering | Issue 12/2021

Magnetohydrodynamics Natural Convection of a Triangular Cavity Involving Ag-MgO/Water Hybrid Nanofluid and Provided with Rotating Circular Barrier and a Quarter Circular Porous Medium at its Right-Angled Corner

Belhadj Mahammed Amine, Fares Redouane, Lounis Mourad, Wasim Jamshed, Mohamed R. Eid, Wael Al-Kouz

10-08-2021 | Research Article-Mechanical Engineering | Issue 12/2021

Non-gradient Robust Topology Optimization Method Considering Loading Uncertainty

Hui Wang, Wenming Cheng, Min Zhang, Run Du, Wei Xiang

11-08-2021 | Research Article-Mechanical Engineering | Issue 12/2021

The Effect of TIG Welding Parameters and Automatization for Non-Heat Treated Inconel 718 Sheets

Akay Nevcanoğlu, Yahya Bozkurt, Serdar Salman

12-08-2021 | Research Article-Mechanical Engineering | Issue 12/2021

An Implicit Integration Algorithm for Non-smooth Dynamic Models Based on Linear Complementarity Problems

Hongming Zhang, Xiaohui Gu, Li Sun

18-08-2021 | Research Article-Mechanical Engineering | Issue 12/2021

Nonlinear Static Analysis of a Bi-directional Functionally Graded Microbeam Based on a Nonlinear Elastic Foundation Using Modified Couple Stress Theory

Mojtaba Gorji Azandariani, Mohammad Gholami, Ehsan Vaziri, Akbar Nikzad

19-08-2021 | Research Article-Mechanical Engineering | Issue 12/2021

Impact of Hall Current on a 3D Casson Nanofluid Flow Past a Rotating Deformable Disk with Variable Characteristics

Naila Shaheen, Muhammad Ramzan, M. Kbiri Alaoui

22-08-2021 | Research Article-Mechanical Engineering | Issue 12/2021

CFD of Flow Dynamic and Heat Transfer Characteristics of Dual Step Cylinders at Re = 2100

D Siva Krishna Reddy, Pankaj Kumar, Jai Makhija, Amjad Ali Pasha, Abdul Zubar Hameed

01-09-2021 | Research Article-Mechanical Engineering | Issue 12/2021

A High Magnetic Flux Density Lorentz Force Magnetic Bearing Design Method with Suction and Combined Magnetic Steel

Yin Zengyuan, Cai Yuanwen, Ren Yuan, Wang Weijie, Xiaocen Chen

02-09-2021 | Research Article-Mechanical Engineering | Issue 12/2021

Effect of Virtual Reality-Based Training on Complex Industrial Assembly Task Performance

Ömür Kaya Kalkan, Şener Karabulut, Gürhan Höke

03-09-2021 | Research Article-Mechanical Engineering | Issue 12/2021

Impact and Shear Behavior of PLA/12%Cu Reinforced Composite Filament Printed at Different FDM Conditions

M. Venkata Pavan, K. Balamurugan, V. Srinivasadesikan, Shyi-Long Lee

04-09-2021 | Research Article-Mechanical Engineering | Issue 12/2021 Open Access

Artificial Neural Network–Particle Swarm Optimization (ANN-PSO) Approach for Behaviour Prediction and Structural Optimization of Lightweight Sandwich Composite Heliostats

Sulaiman O. Fadlallah, Timothy N. Anderson, Roy J. Nates

06-09-2021 | Research Article-Mechanical Engineering | Issue 12/2021

Research on Numerical Simulation of Wind Kinetic Energy Recovery Power Generation at Mine Return Air Wellhead

Xiaohong Gui

23-06-2021 | Correction | Issue 12/2021

Correction to: Investigation of Damping Characteristics on Copper-Based Shape Memory Alloy Frictional Damper in Boring Process

Chockalingam Singaravelu, Prasannavenkadesan Varatharajan, Ganesan Ramu, Karthikeyan Alagappan

21-09-2021 | Correction | Issue 12/2021

Correction to: Engineering of Novel Fe-Based Bulk Metallic Glasses Using a Machine Learning-Based Approach

Tzu-Chia Chen, Rajiman Rajiman, Marischa Elveny, John William Grimaldo Guerrero, Adedoyin Isola Lawal, Ngakan Ketut Acwin Dwijendra, Aravindhan Surendar, Svetlana Dmitrievna Danshina, Yu Zhu

Current Publications

Premium Partners

    Image Credits