Skip to main content
main-content
Top

Journal

Arabian Journal for Science and Engineering

Arabian Journal for Science and Engineering 8/2021

Issue 8/2021

Table of Contents ( 71 Articles )

23-02-2021 | Review-Mechanical Engineering | Issue 8/2021

Influence of Higher Alcohol Additives in Methanol–Gasoline Blends on the Performance and Emissions of an Unmodified Automotive SI Engine: A Review

Bhavin K. Bharath, V. Arul Mozhi Selvan

01-03-2021 | Review-Mechanical Engineering | Issue 8/2021

A Comprehensive Review on Machining of Titanium Alloys

Mehdi Hourmand, Ahmed A. D. Sarhan, Mohd Sayuti, Mohd Hamdi

24-04-2021 | Review-Mechanical Engineering | Issue 8/2021

Review on Surface Quality Improvement of Additively Manufactured Metals by Laser Polishing

Tolgahan Ermergen, Fatih Taylan

25-01-2021 | Research Article-Mechanical Engineering | Issue 8/2021

A Micromechanics-Based Hierarchical Analysis of Thermal Conductivity of Metallic Nanocomposites with Agglomerated Ceramic Nanoparticles

M. K. Hassanzadeh-Aghdam, R. Ansari

27-01-2021 | Research Article-Mechanical Engineering | Issue 8/2021

Numerical Simulations of Heat Transfer Performance of Taylor–Couette Flow in Slit Model

Si-liang Sun, Dong Liu, Wei-Dong Shi, Ying-Ze Wang, Hyoung-Bum Kim

27-01-2021 | Research Article-Mechanical Engineering | Issue 8/2021

Macro to Atomic Scale Characterization of 3 mol% Yttria-Stabilized Tetragonal Zirconia Polycrystalline (3Y-TZP) Ceramics for Welding Pin Applications

Arife Yurdakul, Hasan Gocmez, Hilmi Yurdakul

28-01-2021 | Research Article-Mechanical Engineering | Issue 8/2021

Effect of Growth in Turbine Size on Rotor Aerodynamic Performance of Modern Commercial Large-Scale Wind Turbines

Mehmet Bilgili, Sergen Tumse, Mehmet Tontu, Besir Sahin

01-02-2021 | Research Article-Mechanical Engineering | Issue 8/2021

Impact of Process Parameters on Solid Particle Erosion Behavior of Waste Marble Dust-Filled Polyester Composites

Sandip Kumar Nayak, Alok Satapathy, Sisir Mantry

01-02-2021 | Research Article-Mechanical Engineering | Issue 8/2021

Thermosyphon Flat Plate Collector with Nanodiamond-Water Nanofluids: Properties, Friction Factor, Heat Transfer, Thermal Efficiency, and Cost Analysis

B. Saleh, L. Syam Sundar

02-02-2021 | Research Article-Mechanical Engineering | Issue 8/2021

New Application of Abrasive Slurry Jet in Coal Rocks Breaking and Prediction Model of Its Rock Breaking Ability

Wang Fengchao, Li Liucan, Zhou Xin, Lin Jie, Guo Chuwen

02-02-2021 | Research Article-Mechanical Engineering | Issue 8/2021

Simulation of Pool and Compartment Fire Using Flamelet Generated Manifold With/Without Radiation Coupling

Mohammad Safarzadeh, Ghassem Heidarinejad, Hadi Pasdarshahri

03-02-2021 | Research Article-Mechanical Engineering | Issue 8/2021

A Novel Smooth Super-Twisting Control Method for Perturbed Nonlinear Double-Pendulum-Type Overhead Cranes

Muhammad A. Shehu, Aijun Li

05-02-2021 | Research Article-Mechanical Engineering | Issue 8/2021 Open Access

Psychophysics Experiment to Check the Temperature Impacts Over Human Fingertips for the Application of Textural Applications in Haptics Technology

Dadi Ravikanth, P. Hariharan

07-02-2021 | Research Article-Mechanical Engineering | Issue 8/2021

Sustainable Electrical Discharge Machining of Nimonic C263 Superalloy

Renu K. Shastri, Chinmaya P. Mohanty

08-02-2021 | Research Article-Mechanical Engineering | Issue 8/2021

Flow over a Needle Moving in a Stream of Dissipative Fluid Having Variable Viscosity and Thermal Conductivity

M. Qasim, N. Riaz, Dianchen Lu, M. I. Afridi

08-02-2021 | Research Article-Mechanical Engineering | Issue 8/2021

Flow Behaviour and Aerodynamic Loading on a Stand-Alone Heliostat: Wind Incidence Effect

Sulaiman O. Fadlallah, Timothy N. Anderson, Roy J. Nates

10-02-2021 | Research Article-Mechanical Engineering | Issue 8/2021

Meta-Heuristic Tuning of the LQR Weighting Matrices Using Various Objective Functions on an Experimental Flexible Arm Under the Effects of Disturbance

Hasan Huseyin Bilgic, Muhammed Arif Sen, Ahmet Yapici, Hakan Yavuz, Mete Kalyoncu

12-02-2021 | Research Article-Mechanical Engineering | Issue 8/2021

Numerical Investigation of Producer Gas Combustion Under Different Mixing Patterns of Air–Fuel Injections in a Cyclone Combustor

Lemthong Chanphavong, Keophousone Phonhalath

13-02-2021 | Research Article-Mechanical Engineering | Issue 8/2021

A Study on Prediction of Process Parameters of Shot Peen Forming Using Artificial Neural Network Optimized by Genetic Algorithm

T. Wang, J. B. Wang, X. J. Zhang, C. Liu

15-02-2021 | Research Article-Mechanical Engineering | Issue 8/2021

Analytical Modeling and Vibration Analysis of the Last-Stage LP Steam Turbine Blade Made of Functionally Graded Material

Keshav Alias Deepesh Ramesh Shetkar, J. Srinivas

15-02-2021 | Research Article-Mechanical Engineering | Issue 8/2021

Impacts of the Variable Properties of a Porous Medium on the Entropy Analysis Within Odd-Shaped Enclosures Filled by Hybrid Nanofluids

Sameh E. Ahmed, Zehba A. S. Raizah, Abdelraheem M. Aly

15-02-2021 | Research Article-Mechanical Engineering | Issue 8/2021

Optimization of Welding Process Parameters for Activated Tungsten Inert Welding of Inconel 625 Using the Technique for Order Preference by Similarity to Ideal Solution Methodology

J. Sivakumar, Nanda Naik Korra

18-02-2021 | Research Article-Mechanical Engineering | Issue 8/2021

Aerodynamic Performance Optimization of Multiple Slat Airfoil based on Multi-Objective Genetic Algorithm

Krishanu Kumar, Pankaj Kumar, Santosh Kumar Singh

19-02-2021 | Research Article-Mechanical Engineering | Issue 8/2021

Dynamic Model and Intelligent Optimal Controller of Flexible Link Manipulator System with Payload Uncertainty

Esmail Ali Alandoli, T. S. Lee, Y. J. Lin, V. Vijayakumar

20-02-2021 | Research Article-Mechanical Engineering | Issue 8/2021

Estimation of Optimal Cone Index by Using Neural Networks

Sajjad Derafshpour, Morteza Valizadeh, Aref Mardani

25-02-2021 | Research Article-Mechanical Engineering | Issue 8/2021

Improvement and Fusion of A* Algorithm and Dynamic Window Approach Considering Complex Environmental Information

Xianyou Ji, Shuo Feng, Qidong Han, Huangfei Yin, Shaowei Yu

22-02-2021 | Research Article-Mechanical Engineering | Issue 8/2021

Determination of Fracture Toughness and KIC-CVN Correlations for BM, HAZ, and WB in API 5L X60 Pipeline

S. Capula-Colindres, G. Terán, D. Angeles-Herrera, J. C. Velázquez, E. Torres-Santillán

26-02-2021 | Research Article-Mechanical Engineering | Issue 8/2021

Effect of Leading and Trailing Spark Plugs on Combustion, Fuel Consumption and Exhaust Emission in a Wankel Engine

Ömer Cihan, Osman Akın Kutlar

27-02-2021 | Research Article-Mechanical Engineering | Issue 8/2021

Thermal-Transient Analysis for Cooling Time on New Formulation of Metal Epoxy Composite (MEC) as Mold Inserts

H. Radhwan, S. Sharif, Z. Shayfull, M. A. Suhaimi, Abdellah l-hadj, M. T. M. Khushairi

06-03-2021 | Research Article-Mechanical Engineering | Issue 8/2021

Comparisons of Using Ternary and Dual Gasoline–Alcohol Blends in Performance and Releases of SI Engines

Ashraf Elfasakhany

08-03-2021 | Research Article-Mechanical Engineering | Issue 8/2021

A Spectral Relaxation Approach for Boundary Layer Flow of Nanofluid Past an Exponentially Stretching Surface with Variable Suction in the Presence of Heat Source/Sink with Viscous Dissipation

A. Srinivasa Rao, K. Dasaradha Ramaiah, Gangadhar Kotha, M Venkata Subba Rao, Ali J. Chamkha

08-03-2021 | Research Article-Mechanical Engineering | Issue 8/2021

Effect of post-reaction ultrasonic treatment on synthesis, microstructural evolution and mechanical behaviour of Al 4043/TiB2 in situ nanocomposites

S. Ramani, K. Leo Dev Wins, Jayakrishnan Nampoothiri, K. R. Ravi, D. S. Ebenezer Jacob Dhas

09-03-2021 | Research Article-Mechanical Engineering | Issue 8/2021

Numerical Simulation of a Single-compartment Household Refrigerator During Start-up Transient and Stationary Cyclic Operation with Different Refrigerant Charges

Matheus dos Santos Guzella, Luben Cabezas-Gómez, Luiz Gustavo Monteiro Guimarães

10-03-2021 | Research Article-Mechanical Engineering | Issue 8/2021

Numerical and Experimental Thermal–Hydraulic Performance Analysis of a Supercritical CO2 Brayton Cycle PCHE Recuperator

Feyyaz Arslan, Bülent Güzel

10-03-2021 | Research Article-Mechanical Engineering | Issue 8/2021

Investigation of Micro-Hole Quality in Drilled CFRP Laminates Through CO2 Laser

N. Ramanujam, S. Dhanabalan, D. Raj Kumar, N. Jeyaprakash

16-03-2021 | Research Article-Mechanical Engineering | Issue 8/2021

Flow Rate Optimization for Thermal-FSI of Minichannel Heat Sink: A Numerical approach

Ahmad Adnan Shoukat, Umer Masood Chaudry, Muhammad Shaban, M. Anwar, Talha Irfan Khan, Hafiz Waqar Ahmad, Rana Mujahid

17-03-2021 | Research Article-Mechanical Engineering | Issue 8/2021

Modeling and Experimental Verification of a Semi-rotary Fluid Damper Based on an Improved Kelvin Model

Xiaoyan Cao, Min Yu, Jin Zhou, Xinxing Guo

17-03-2021 | Research Article-Mechanical Engineering | Issue 8/2021

Modelling and Performance Analysis of an Electric Vehicle Powered by a PEM Fuel Cell on New European Driving Cycle (NEDC)

Fırat Işıklı, Ali Sürmen, Ayetül Gelen

17-03-2021 | Research Article-Mechanical Engineering | Issue 8/2021

An Analysis on Tool-Chip Interaction During Dry Machining of SS316 Using Textured Carbide Tools

Hargovind Soni, P. M. Mashinini

17-03-2021 | Research Article-Mechanical Engineering | Issue 8/2021

Evaluation of Vital Factors Effecting 4S CI Engine with Altered IT Using Calophyllum Inophyllum Blends with H2 Enrichment

Abdullah AlGhafis, M. Shameer Basha, Sarap Raghavendra, Syed Azam Pasha

18-03-2021 | Research Article-Mechanical Engineering | Issue 8/2021

Influence of Projectile-Barrel Coupling on Gun Vibration of the Moving Tank Under the Influence of a Stabilizer

Yu Chen, Guolai Yang, Honggen Zhou, Jinfeng Liu

18-03-2021 | Research Article-Mechanical Engineering | Issue 8/2021

Modelling of Heat Flow When Thermal Conductivity, Specific Heat Capacity and Density All are a Function of Temperature

Debtanay Das, Vidyut Dey, Bidyut Bhattacharyya

18-03-2021 | Research Article-Mechanical Engineering | Issue 8/2021

CPSM Simulation of the Variable Properties’ Role in MHD Non-Newtonian Micropolar Nanofluid Flow Over a Stretching Porous Sheet (Flow Filtration)

Nasser S. Elgazery

18-03-2021 | Research Article-Mechanical Engineering | Issue 8/2021

A Review on Advancement in Friction Stir Welding Considering the Tool and Material Parameters

Vijay Kumar Mahakur, Krushna Gouda, Promod Kumar Patowari, Sumit Bhowmik

20-03-2021 | Research Article-Mechanical Engineering | Issue 8/2021

Effects of SiO2-Al2O3-ZrO2 Tri-hybrid Nanofluids on Surface Roughness and Cutting Temperature in End Milling Process of Aluminum Alloy 6061-T6 Using Uncoated and Coated Cutting Inserts with Minimal Quantity Lubricant Method

W. Safiei, M. M. Rahman, A. R. Yusoff, M. N. Arifin, W. Tasnim

22-03-2021 | Research Article-Mechanical Engineering | Issue 8/2021

Energy Efficiency Improvement of the Split Air Conditioner Through Condensate Assisted Evaporative Cooling

Majid Ramzan, Muhammad Sajid Kamran, Muhammad Wajid Saleem, Hassan Ali, Mudather Ibrahim Mudather Zeinelabdeen

23-03-2021 | Research Article-Mechanical Engineering | Issue 8/2021

Experimental and Numerical Investigations of Multi-leaks Detection in a Nonhomogenous Pipeline System

Lazhar Ayed, Zahreddine Hafsi

24-03-2021 | Research Article-Mechanical Engineering | Issue 8/2021

Free Vibrational Behaviour of Multi-Directional Porous Functionally Graded Structures

Prashik Malhari Ramteke, Subrata Kumar Panda

25-03-2021 | Research Article-Mechanical Engineering | Issue 8/2021

Experimental Investigation and Comparative Study of Sintering of Microcrystalline Nickel Using Microwave and Conventional Method

Md Izhar Hussain, Manowar Hussain, Ankit Gupta, Gulshad Nawaz Ahmad

26-03-2021 | Research Article-Mechanical Engineering | Issue 8/2021

Assessment of Tool Wear and Surface Integrity in Ductile Cutting Using a Developed Tool

Seyed Hasan Musavi, Behnam Davoodi, Mohammad Nankali

30-03-2021 | Research Article-Mechanical Engineering | Issue 8/2021

Thermodynamic Parameters and Adsorption Mechanism of Corrosion Inhibition in Mild Steel Using Jatropha Leaf Extract in Hydrochloric Acid

S. C. Ikpeseni, G. O. Odu, H. I. Owamah, P. U. Onochie, D. C. Ukala

30-03-2021 | Research Article-Mechanical Engineering | Issue 8/2021

Analysis of Weight loss in Reciprocating Wear Test of Cylinder Liner and Piston Ring Coated with Molybdenum

Ferit Ficici, Sezer Kurgun

31-03-2021 | Research Article-Mechanical Engineering | Issue 8/2021

Mechanical and Corrosion Properties of Low-Carbon Steel Processed by Cryorolling: Effect of Different Initial Microstructures

S. A. Zakaria, M. P. Lew, A. S. Anasyida, M. N. Idris, H. Zuhailawati, A. Ismail

01-04-2021 | Research Article-Mechanical Engineering | Issue 8/2021

Intelligent Fault Diagnosis of Reciprocating Compressor Based on Attention Mechanism Assisted Convolutional Neural Network Via Vibration Signal Rearrangement

Dongfang Zhao, Shulin Liu, Hongli Zhang, Xin Sun, Lu Wang, Yuan Wei

04-04-2021 | Research Article-Mechanical Engineering | Issue 8/2021

Theoretical and Experimental Investigation of the Performance of an Atkinson Cycle Engine

Can Cinar, Abdullah Onur Ozdemir, Halil Erdi Gulcan, Tolga Topgül

08-04-2021 | Research Article-Mechanical Engineering | Issue 8/2021

A New Saturated Two-Phase Flow Boiling Correlation Based on Propane (R290) Data

Oguz Emrah Turgut, Mustafa Turhan Coban

08-04-2021 | Research Article-Mechanical Engineering | Issue 8/2021

Mechanical Property and Prediction Model for FDM-3D Printed Polylactic Acid (PLA)

M. Samykano

09-04-2021 | Research Article-Mechanical Engineering | Issue 8/2021

Multi-objective Soft Computing Approaches to Evaluate the Performance of Abrasive Water Jet drilling Parameters on Die Steel

Sivakumar Mahalingam, Balaji Kuppusamy, Yuvaraj Natarajan

12-04-2021 | Research Article-Mechanical Engineering | Issue 8/2021

Nonlinear dynamic analysis of the extended telescopic joints manipulator with flexible links

Mostafa Aghajari, Siavash Fathollahi Dehkordi, Moharram Habibnejad Korayem

13-04-2021 | Research Article-Mechanical Engineering | Issue 8/2021

Plasma-Assisted Hybrid Dissimilar Friction Stir Welding for Joining of DH36 Steel and AISI 1008 Steel: Thermal Modelling and Experimental Analysis

Pardeep Pankaj, Avinish Tiwari, Pankaj Biswas, A. Gourav Rao

13-04-2021 | Research Article-Mechanical Engineering | Issue 8/2021

Assessment of Optimal Parameters of Wire EDM on Ni-Coated Al2O3p/AA7075 MMCs Using PCA Coupled GRA

D. Vijay Praveen, D. Ranga Raju, M. V. Jagannadha Raju

13-04-2021 | Research Article-Mechanical Engineering | Issue 8/2021

Influence of Surfactants on the Tribological Behavior of Nanoparticle Additives Under Boundary Lubrication Conditions

Yosef Jazaa, Sriram Sundararajan

15-04-2021 | Research Article-Mechanical Engineering | Issue 8/2021

Numerical Study of Heat Transfer Characteristics of mPCM Slurry During Freezing

Rabia Shaukat, Zahid Anwar, Shahid Imran, Fahad Noor, Adnan Qamar

19-04-2021 | Research Article-Mechanical Engineering | Issue 8/2021

Influence of Module Length on Water Desalination Using Air Gap Membrane Distillation Process: An Experimental Comparative Study

M. A. E.-R. Abu-Zeid, X. Lu, S. Zhang

21-04-2021 | Research Article-Mechanical Engineering | Issue 8/2021

Smart Fiber Optics Embedding in Powder-Based Materials: Numerical and Experimental Assessment

Abba A. Abubakar, Samir Mekid, Hammam Daraghma, Nouari Saheb

22-04-2021 | Research Article-Mechanical Engineering | Issue 8/2021

Development of a Generalized Mathematical Model for Slider-Crank Mechanism Based on Multiobjective Concurrent Engineering with Application

Hoang Minh Dang, Van Phuong Bui, Van Binh Phung, Do Van Thom, Phung Van Minh, Sergey Sergeevich Gavriushin, Nguyen Viet Duc

28-04-2021 | Research Article-Mechanical Engineering | Issue 8/2021

Machinability Analysis of Inconel 718 Superalloy with AlTiN-Coated Carbide Tool Under Different Cutting Environments

Ramazan Çakıroğlu

25-05-2021 | Research Article-Mechanical Engineering | Issue 8/2021

Structural Assessment of a Cylindrical Liquid Tank due to Shape Change of Roof during Sloshing Induced by Seismic Activity

Yasir Zulfiqar, M. Javed Hyder, Ahmad Jehanzeb, Hafiz Waqar Ahmad, Asim Zulfiqar, Umer Masood Chaudry

12-06-2021 | Research Article-Mechanical Engineering | Issue 8/2021

GWO-Potential Field Method for Mobile Robot Path Planning and Navigation Control

Mohd. Nayab Zafar, J. C. Mohanta, Anupam Keshari

25-06-2021 | Research Article-Mechanical Engineering | Issue 8/2021

Entropy-Based Lean, Energy and Six Sigma Approach to Achieve Sustainability in Manufacturing System

Neha Verma, Vinay Sharma, M. Affan Badar

24-11-2020 | Correction | Issue 8/2021

Correction to: Peristaltic Transport of a Casson Fluid in a Non-uniform Inclined Tube with Rosseland Approximation and Wall Properties

Z. Abbas, M. Y. Rafiq, J. Hasnain, T. Javed

Current Publications

Premium Partners

    Image Credits