Top

Metallurgist

Published in:

28-09-2022

Assessment of the Adequacy of the Model for Determining the Composition and Properties of Final Slag in a Blast Furnace

Authors: A. V. Pavlov, N. A. Spirin, V. V. Lavro, I. A. Gurin, V. A. Beginyu

Published in: Metallurgist | Issue 5-6/2022

Activate our intelligent search to find suitable subject content or patents.

search-config

AI-assisted search

Off

Abstract

The correctness of the calculated composition and characteristics of the final slag at a blast-furnace engineer’s workstation is assessed. The developed model accounts for the combined effect of the components of the slag on its properties by calculating the viscosity polytherms in the range of temperatures in the blast furnace. The use of the model is extended to slags with widely varying composition and content such as Al₂O₃ 3–17%; MgO 5–20%; SiO₂ ≥33%; СаО ≥ 33%, TiO₂ <2.0% with slag basicity CaO/SiO₂ = 0.8–1.2. The results of statistical processing of more than 111 thousand iron tappings and about 300 periods of the slag conditions for eight MMK blast furnaces are presented. The coefficients of pair correlation between the actual performance of the blast furnace during individual tappings and the performance predicted by the process model were calculated. The pair correlation coefficient between the actual and calculated (from the chemical composition of the charge materials) contents of individual components in the final slag was from 0.85 to 0.97. Comparison of the viscosity of slags of different compositions and at different temperatures showed that the experimental data and the calculated values are in agreement with a relative error of no higher than 5.4%.

previous article Extraction of Nickel from Oxidized Nickel Ores by Heap Leaching

next article Simulation of the Heat-Transfer Conditions in a CCM Mold

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

inform now

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

inform now

G. G. Efimenko, A. A. Gimmel’farb, and V. E. Levchenko, Metallurgy of Pig Iron [in Russian], Vyshcha Shkola, Kiev (1981).

N. N. Babarykin, Theory and Technology of the Blast-Furnace Process [in Russian], MGTU im. G. I. Nosova, Magnitogorsk (2009).

E. F. Vegman, B. N. Zherebin, A. N. Pokhvisnev, et al., Metallurgy of Pig Iron, Akademkniga, Moscow (2004).

P. Azadi, J. Winz, E. Leo, R. Klock, and S. Engell, “A hybrid dynamic model for the prediction of molten iron and slag quality indices of a large-scale blast furnace,” Computers and Chemical Engineering, 156, 107573 (2022); https://doi.org/10.1016/j.compchemeng.2021.107573; https://www.scopus.com/record/display.uri?eid = 2-s2.0-85117698713&origin=resultslist.

J. Zhang, C. Wang, K. Jiao, J. Zhang, Z. Liu, H. Ma, X. Fan, and Z. Guo, “Effect of BaO and MnO on high-temperature properties and structure of blast furnace slag,” J. of NonCrystalline Solids, 5711, 121066 (2021); https://doi.org/10.1016/j.jnoncrysol.2021.121066; https://doi.org/10.1016/j.jnoncrysol.2021.121066; https://www.scopus.com/record/display.uri?eid=2-s2.0-85110738208&origin=resultslist.

W. Deng, W. Deng, L. Zhang, and D. Cang, “Study on distribution of sulfur element in blast furnace (BF) process with different pellet proportions,” Metalurgija, 60, No. 3–4, 185–187 (2021); https://www.scopus.com/record/display.uri?eid=2-s2.0-85105296173&origin=resultslist.

Z. Pang, X. Lv, Y. Jiang, J. Ling, and Z. Yan, “Blast furnace ironmaking process with super-high TiO₂ in the slag: viscosity and melting properties of the slag,” Metallurgical and Materials Trans. B: Proc. Metallurgy and Materials Proc. Sci., 51, No. 2, 722–731 (2020); https://doi.org/10.1007/s11663-019-01756-0; https://www.scopus.com/record/display.uri?eid=2-s2.0-85077031296&origin=resultslist.

K.-X. Jiao, J.-L. Zhang, H.-B. Zuo, and Z.-J. Liu, “Calculation analysis of zinc dissolution behaviors of the slag-iron in blast furnaces,” Dongbei Daxue Xuebao, J. of Northeastern University, 35, No. 3, 383–387 (2014); https://doi.org/10.3969/j.issn.1005e-3026.2014.03.018; https://www.scopus.com/record/display.uri?eid=2-s2.0-84897510515&origin=resultslist.

C.-L. Chen, L. Zhang, S. Wright, S.-Y. Sun, S. Jahanshahi, and T. Honeyands, “Modelling the effect of MnO on slag properties and Mn, Si and S distribution in blast furnaces,” in: 5th Int. Congr. on the Science and Technology of Ironmaking, ICSTI, 98865 (2009), pp. 1116–1120; https://www.scopus.com/record/display.uri?eid=2-s2.0-84883650785&origin=resultslist.

10.

O. P. Onorin, N. A. Spirin (ed.), V. L. Terent’ev, et al., Computer-Based Methods for the Simulation of the Blast-Furnace Process [in Russian], UGTU-UPI, Yekaterinburg (2005).

11.

N. A. Spirin, V. V. Lavrov, V. Yu. Rybolovlev, A. V. Krasnobaev, O. P. Onorin, and I. E. Kosachenko, Model Decision-Making Systems in Blast-Furnace Process Control System [in Russian], UrFU, Yekaterinburg (2011).

12.

N. A. Spirin, V. V. Lavrov, V. Yu. Rybolovlev, L. Yu. Gileva, A. V. Krasnobaev, V. S. Shvydkii, O. P. Onorin, K. A. Shchipanov, and A. A. Burykin, Mathematical Simulation of Metallurgical Processes in a Process Control System [in Russian], UrFU, Yekaterinburg (2014).

13.

A. V. Pavlov, A. A. Polinov, N. A. Spirin, O. P. Onorin, and V. V. Lavrov, “Use of model systems for solving new technological problems in blast-furnace production,” Metallurgist, 61, No. 5–6, 448–454 (2017); https://doi.org/10.1007/s11015-017-0516-7; https://www.scopus.com/record/display.uri?eid=2- s2.0-85031930818&origin=resultslist.

14.

N. A. Spirin, O. P. Onorin, V. Yu. Rybolovlev, A. I. Perminov, and K. A. Shchipanov, “Simulation of slag processes in blastfurnace smelting,” Steel in Transl., 35, No. 8, 7–11 (2005); https://www.scopus.com/record/display.uri?eid=2-s2.0-33748965584&origin=resultslist.

15.

N. A. Spirin, V. V. Lavrov, L. A. Zainullin, A. R. Bondin, and A. A. Burykin, Methods of Planning and Processing Data of an Engineering Experiment [in Russian], UINTs, Yekaterinburg (2015).

16.

Verein deutscher Eisenhüttenleuteb (editor), Schlackenatlas/Slag Atlas, Stahleisen, Düsseldorf (1981).

17.

N. L. Zhilo, Formation and Properties of Blast-Furnace Slags [in Russian], Metallurgiya, Moscow (1974).

18.

V. G. Voskoboinikov, N. E. Dunaev, and A. G. Mikhalevich, Properties of Liquid Blast-Furnace Slags [in Russian], Metallurgiya, Moscow (1975).

19.

E. F. Vegman, Ore Preparation and Blast-Furnace Process, Vol. 1 of the two-volume Blast-Furnace Practice Handbook [in Russian], Metallurgiya, Moscow (1989).

Title: Assessment of the Adequacy of the Model for Determining the Composition and Properties of Final Slag in a Blast Furnace
Authors: A. V. Pavlov
N. A. Spirin
V. V. Lavro
I. A. Gurin
V. A. Beginyu
Publication date: 28-09-2022
Publisher: Springer US
Published in: Metallurgist / Issue 5-6/2022
Print ISSN: 0026-0894
Electronic ISSN: 1573-8892
DOI: https://doi.org/10.1007/s11015-022-01365-4

Springer Professional

Abstract

Please log in to get access to your license.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Other articles of this Issue 5-6/2022

Microstructure and Elemental Composition of Powders Obtained Under Conditions of Electroerosive Metallurgy of Heat-Resistant Nickel Alloy ZhS6U Wastes in Water

Evaluating the Effects of Certain Process Parameters on the Metal Cooling Rate in a Steel Ladle

Aspects of Structure Formation in Surface Layers of Steel after Laser Alloying from Various Coatings

Structure of the Interlayer Boundary of Layered Metal Materials with an Internal Protector Obtained Via Explosion Welding

Use of Solid Slag Mixtures in a Ladle Furnace Unit

Optimization of the Slag Conditions in a Ladle Furnace