Top

Arabian Journal for Science and Engineering

Published in:

15-02-2020 | Research Article-Electrical Engineering

Battery’s Life-Time Estimation of Industrial WirelessHART Sensor Actuator Node

Published in: Arabian Journal for Science and Engineering | Issue 8/2020

Activate our intelligent search to find suitable subject content or patents.

search-config

AI-assisted search

Off

Abstract

In industrial applications of wireless technologies, very common, wireless sensor and actuator nodes are installed at fields. Therefore, it is critical to extend battery’s lifetime for ensuring continuous servicing period of field instruments over years. Apart from periodic battery status update during operations of the nodes, at planning stage, plant management team can estimate batteries’ lifetime at field wireless instruments for operational budget estimation and preventive maintenance planning. This work proposes a framework to estimate the battery’s lifetime taken into consideration of periodic update periods and devices’ operational frequencies. The framework is based on the knowledge of wireless node, microcontroller’s power consumption, and battery specifications. Based on the analysis, at particular operational conditions (i.e., update period of 512 s, low-power mode with voltage of 1.8 V), the estimated battery’s lifetime of a wireless node can reach up to 9 years.

previous article A Probabilistic Tabu Search State Assignment Algorithm for Area and Power Optimization of Sequential Circuits

next article Adaptive Detection of Islanding and Power Quality Disturbances in a Grid-Integrated Photovoltaic System

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

inform now

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

inform now

Rerkratn, A.; Laosuwan, I.; Tammaruckwattana, S.; Parnklang, J.: Integration of WirelessHART devices into mitsubishi PLC for plant monitoring. In: 2018 3rd International Conference on Control and Robotics Engineering (ICCRE), pp. 209–212 (2018). https://doi.org/10.1109/ICCRE.2018.8376466

Verma, V.K.; Singh, S.; Pathak, N.: Optimized battery models observations for static, distance vector and on-demand based routing protocols over 802.11 enabled wireless sensor networks. Wirel. Pers. Commun. 81(2), 503–517 (2015)CrossRef

Raza, M.; Aslam, N.; Le-Minh, H.; Hussain, S.; Cao, Y.; Khan, N.M.: A critical analysis of research potential, challenges, and future directives in industrial wireless sensor networks. IEEE Commun. Surv. Tutor. 20(1), 39–95 (2018). https://doi.org/10.1109/COMST.2017.2759725 CrossRef

Amzucu, D.M.; Li, H.; Fledderus, E.: Indoor radio propagation and interference in 2.4 ghz wireless sensor networks: measurements and analysis. Wirel. Pers. Commun. 76(2), 245–269 (2014)CrossRef

Chen, G.; Cao, X.; Liu, L.; Sun, C.; Cheng, Y.: Joint scheduling and channel allocation for end-to-end delay minimization in industrial wirelesshart networks. IEEE Internet Things J. 6(2), 2829–2842 (2019). https://doi.org/10.1109/JIOT.2018.2875508 CrossRef

Tran, C.D.; Ibrahim, R.; Asirvadam, V.S.; Saad, N.; Miya, H.S.: Internal model control for industrial wireless plant using wirelesshart hardware-in-the-loop simulator. ISA Trans. 75, 236–246 (2018). https://doi.org/10.1016/j.isatra.2017.12.010 CrossRef

Maass, A.I.; Nešić, D.: Stabilization of non-linear networked control systems closed over a lossy wirelesshart network. IEEE Control Syst. Lett. 3(4), 996–1001 (2019). https://doi.org/10.1109/LCSYS.2019.2920435 CrossRef

Blevins, T.; Chen, D.; Nixon, M.; Wojsznis, W.: Wireless Control Foundation: Continuous and Discrete Control for the Process Industry. International Society of Automation, Triangle Park (2015)

Nawaz, F.; Jeoti, V.: Performance assessment of wirelesshart technology for its implementation in dense reader environment. Computing 98(3), 257–277 (2016)MathSciNetCrossRef

10.

Chung, T.D.; Ibrahim, R.; Asirvadam, V.S.; Saad, N.; Hassan, S.M.: Wireless HART: Advanced EWMA Filter Design for Industrial Wireless Networked Control Systems, 1st edn. Taylor & Francis Group, LLC, Abingdon (2017)

11.

Saifullah, A.; Xu, Y.; Lu, C.; Chen, Y.: End-to-end communication delay analysis in industrial wireless networks. IEEE Trans. Comput. 64(5), 1361–1374 (2015)MathSciNetCrossRef

12.

Yang, D.; Ma, J.; Xu, Y.; Gidlund, M.: Safe-wirelesshart: a novel framework enabling safety-critical applications over industrial wsns. IEEE Trans. Ind. Inform. 14(8), 3513–3523 (2018). https://doi.org/10.1109/TII.2018.2829899 CrossRef

13.

Collotta, M.; Ferrero, R.; Rebaudengo, M.: A fuzzy approach for reducing power consumption in wireless sensor networks: A testbed with IEEE 802.15.4 and WirelessHart. IEEE Access 7, 64866–64877 (2019). https://doi.org/10.1109/ACCESS.2019.2917783 CrossRef

14.

Chung, T.D.; Ibrahim, R.B.; Asirvadam, V.S.; Saad, N.B.; Hassan, S.M.: Simulation of WirelessHart networked control system with packet dropout. In: Control Conference (ASCC), 2015 10th Asian, pp. 1–6. IEEE (2015)

15.

Duc Chung, T.; Ibrahim, R.B.: Building ambient temperature measurement using industrial wireless mesh technology. In: 2019 IEEE Student Conference on Research and Development (SCOReD), pp. 146–151 (2019). https://doi.org/10.1109/SCORED.2019.8896316

16.

Zhu, X., Lin, T., Han, S., Mok, A., Chen, D., Nixon, M., Rotvold, E.: Measuring WirelessHart against wired fieldbus for control. In: IEEE 10th International Conference on Industrial Informatics, pp. 270–275. IEEE (2012)

17.

Talha, M.; Asghar, F.; Kim, S.H.: A neural network-based robust online SOC and SOH estimation for sealed lead-acid batteries in renewable systems. Arab. J. Sci. Eng. 44(3), 1869–1881 (2019). https://doi.org/10.1007/s13369-018-3200-8 CrossRef

18.

Kaur, A.; Sharma, S.; Mishra, A.: Performance optimization of cognitive decision engine for CR-based iots using various parameter-less meta-heuristic techniques. Arabian J. Sci. Eng. 44(11), 9499–9515 (2019). https://doi.org/10.1007/s13369-019-03787-w CrossRef

19.

Banerjee, A.; Dutta, P.; Ghosh, S.: Experience based energy efficient reactive routing protocol (EXERP) for mobile ad-hoc networks. Arabian J. Sci. Eng. 39(2), 891–901 (2014). https://doi.org/10.1007/s13369-013-0813-9 CrossRef

20.

Ferrari, P.; Flammini, A.; Rizzi, M.; Sisinni, E.: Improving simulation of wireless networked control systems based on wirelesshart. Comput. Stand. Interfaces 35(6), 605–615 (2013)CrossRef

21.

Khader, O.; Willig, A.: An energy consumption analysis of the wireless hart TDMA protocol. Comput. Commun. 36(7), 804–816 (2013)CrossRef

22.

Zand, P.; Mathews, E.; Havinga, P.; Stojanovski, S.; Sisinni, E.; Ferrari, P.: Implementation of wirelesshart in the NS-2 simulator and validation of its correctness. Sensors 14(5), 8633–8668 (2014)CrossRef

23.

Tao, M.; Lu, D.; Yang, J.: An adaptive energy-aware multi-path routing protocol with load balance for wireless sensor networks. Wirel. Pers. Commun. 63(4), 823–846 (2012)CrossRef

24.

Hou, R.; Chen, Y.; Xing, G.: Path selection for optimizing nonlinear battery energy consumption. IEICE Electron. Express 10(22), 20130689–20130689 (2013)

25.

Hou, R.; Zheng, M.: Packet-based nonlinear battery energy consumption optimizing for wsns nodes. IEICE Electron. Express 11(9), 20140167–20140167 (2014)CrossRef

26.

Zhang, L.; Zhang, X.; Qu, K.; Ren, L.; Deng, J.; Zhu, K.: Green and cooperative dash in wireless d2d networks. Wirel. Pers. Commun. 84(3), 1797–1816 (2015)CrossRef

27.

Rahhal, J.S.: Wireless MIMO sensor network with power constraint WLS/BLUE estimators. Wirel. Pers. Commun. 63(2), 447–457 (2012)CrossRef

28.

Zeng, M.; Lee, J.G.; Choi, G.S.; Lee, J.A.: Intelligent sensor node based a low power ECG monitoring system. IEICE Electron. Express 6(9), 560–565 (2009)CrossRef

29.

RF Monolithics, I.: XDM2510H 2.4 GHz Ultra-Low Power WirelessHART RF Transceiver Module. RF Monolithics, Inc, Dallas (2010)

30.

Agyei-Ntim, F.; Newman, K.E.: Lifetime estimation of wireless body area sensor networks using probabilistic analysis. Wirel. Pers. Commun. 68(4), 1745–1759 (2013). https://doi.org/10.1007/s11277-012-0548-z. CrossRef

31.

Gao, D.; Liu, Y.; Zhang, F.; Song, J.: Data aggregation routing for rechargeable wireless sensor networks in forest monitoring. Wirel. Pers. Commun. 79(1), 773–788 (2014)CrossRef

32.

STMicroelectronics: STM32L051x6 STM32L051x8 - Access line ultra-low-power 32-bit MCU ARM®-Based Cortex®-M0+, up to 64 KB Flash, 8 KB SRAM, 2 KB EEPROM, ADC, docid025938 rev 4 edn. STMicroelectronics (2014)

33.

RF Monolithics, I.: Xdm2510hdk Quick Start Guide. RF Monolithics, Inc, Dallas (2010)

34.

Corporation, A.: AwiaTech WirelessHART Evaluation Kit Manual, 4th edn. AwiaTech Corporation, Austin (2014)

Title: Battery’s Life-Time Estimation of Industrial WirelessHART Sensor Actuator Node
Publication date: 15-02-2020
Published in: Arabian Journal for Science and Engineering / Issue 8/2020
Print ISSN: 2193-567X
Electronic ISSN: 2191-4281
DOI: https://doi.org/10.1007/s13369-020-04391-z

Springer Professional

Abstract

Please log in to get access to your license.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Other articles of this Issue 8/2020

Fuzzy-based Clustering Scheme with Sink Selection Algorithm for Monitoring Applications of Wireless Sensor Networks

Identifying the Parameters of Cole Impedance Model Using Magnitude Only and Complex Impedance Measurements: A Metaheuristic Optimization Approach

Performance Analysis of Encoderless DTC of IPMSM for Wide Operating Range

Logically Optimal Novel 4:2 Compressor Architectures for High-Performance Applications

Adaptive Cooperation for Millimeter Wave Communications

Novel Asynchronous Pipeline Architectures for High-Throughput Applications

Premium Partners