Top

Metal Science and Heat Treatment

Published in:

10-05-2016

Causes of Formation and Ways of Elimination of Defects on the Internal Surface of Upset Tube Ends

Authors: A. A. Bogatov, M. V. Erpalov

Published in: Metal Science and Heat Treatment | Issue 1-2/2016

Activate our intelligent search to find suitable subject content or patents.

search-config

AI-assisted search

Off

Abstract

Causes of formation of defects on the internal surface of oil tubes with ends formed by upsetting in SMS Meer hydraulic presses are considered. Interrelated requirements on billets and calibration of the equipment aimed at intensifying the upsetting process in one pass with growth of the wall thickening factor to about 1.85 are formulated.

previous article New Approach to Synthesis of Powder and Composite Materials by Electron Beam. Part 1. Technological Features of the Process

next article Structural Engineering of Vacuum-ARC Multiperiod Coatings

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

inform now

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

inform now

Licensed by the Department of Pressure Treatment of Metals of the Ural Federal University.

V. I. Tazetdinov, M. V. Erpalov, G. N. Kondrat’eva, et al., “Conversion of the process of upsetting of tube ends of the oil extraction range at the PNTZ Company,” in: OMD 2014. Fundamental Problems. Innovation Materials and Technologies, Mater. Int. Sci.-Eng. Congress [in Russian], Izd. “Belyi Veter” OOO, Moscow (2014), Vol. 2, pp. 64 – 69.

M. V. Erpalov, G. N. Kondrat’eva, and A. A. Bogatov, “Updating the process of tube ends upsetting with the aim to raise the efficiency of SMS Meer hydraulic press,” in: Innovation Processes in Metallurgy and Machine Building, Mater. Int. Conf. [in Russian], Izd. Uralsk. Univer., Ekaterinburg (2014), pp. 581 – 592.

V. Ya. Osterenko and E. I. Ermolov, “Forces and rates of deformation in upsetting of tube ends in a horizontal forging machine and a hydraulic press,” in: Production of Pipes. Selected Works on the Theory and Practice of Pipe Production [in Russian], Metallurgiya, Moscow (1987), Issue 18, pp. 122 – 128.

I. Ya. Tarnovskii, A. A. Pozdeev, O. A. Gonago et al., in: I. Ya. Tarnovskii (ed.), The Theory of Pressure Treatment of Metals. Variational Methods for Computing the Forces and Deformations [in Russian], Metallurgizdat, Moscow (1963), 672 p.

API 5CT. Liner Pipes and Tubing, 9th Ed., Intr. 2012-01-01, American Petroleum Institute (2011).

GOST R 50278–92. Drill Pipes with Welded-on Locks. Performance Specification, Intr. 1994-01-01 [in Russian], Izd. Standartinform, Moscow (2010).

V. A. Tkachenko, A. A. Shevchenko, V. P. Strizhak, et al., Pipes for the Petroleum Industry [in Russian], Metallurgiya, Moscow (1986), 256 p.

V. Ya. Ostrenko, “Technological features of upsetting in closed dies,” Metallurg. Gornorud. Prom-st’, No. 1, 33 – 35 (1965).

V. Ya. Ostrenko, “Analytical method for determining the force and power parameters of upsetting of tube ends,” in: Production of Tubes, Coll. Works of VNTITI [in Russian], Metallurgiya, Moscow (1968), No. 20, pp. 223 – 230.

Title: Causes of Formation and Ways of Elimination of Defects on the Internal Surface of Upset Tube Ends
Authors: A. A. Bogatov
M. V. Erpalov
Publication date: 10-05-2016
Publisher: Springer US
Published in: Metal Science and Heat Treatment / Issue 1-2/2016
Print ISSN: 0026-0673
Electronic ISSN: 1573-8973
DOI: https://doi.org/10.1007/s11041-016-9960-4

Springer Professional

Abstract

Please log in to get access to your license.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Other articles of this Issue 1-2/2016

Prediction of the Properties of Heat-Affected Zone of Welded Joints of Sheets from Aluminum Alloys with Structured Surface

Application of Pulse Processes in Fabrication of Metal Matrix Composites

Layer Structure of a Refractory Multilayer Ti/Al Composite After Pressure Diffusion Welding

New Approach to Synthesis of Powder and Composite Materials by Electron Beam. Part 1. Technological Features of the Process

Morphological Characteristics of Chromium Carbides in HP40NbTi Refractory Alloys in Cast Condition and after High-Temperature Holds

Complex Deformation and Thermochemical Treatment of System-Alloyed Low-Carbon Steel 10Kh3G3MF

Premium Partners