Skip to main content
Top
Published in: Mechanics of Composite Materials 2/2022

19-05-2022

Characterization of Polylactic Acid Parts Produced Using the Fused Deposition Modelling

Authors: E. Zīle, D. Zeleniakiene, A. Aniskevich

Published in: Mechanics of Composite Materials | Issue 2/2022

Log in

Activate our intelligent search to find suitable subject content or patents.

search-config
loading …

Abstract

This work is devoted to studying the mechanical behavior of a polylactic acid (PLA) material produced by the fused deposition modelling. The influence of mesostructure on their macro-scale mechanical properties is characterized by porosity. The dependence of its longitudinal and transverse properties on the porosity is found experimentally. It is shown that, due to the crystallization after melting and extrusion, the properties of a single PLA fiber increase in time. The results obtained show that the classical lamination theory and the Tsai–Hill failure criterion can predict the modulus and strength of PLA printed materials.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

  • über 102.000 Bücher
  • über 537 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Finance + Banking
  • Management + Führung
  • Marketing + Vertrieb
  • Maschinenbau + Werkstoffe
  • Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

  • über 67.000 Bücher
  • über 390 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Maschinenbau + Werkstoffe




 

Jetzt Wissensvorsprung sichern!

Literature
1.
go back to reference M. Jamshidian, E. A. Tehrany, M. Imran, M. Jacquot, and S. Desobry, “Poly-lactic acid: production, applications, nanocomposites, and release studies,” Compr. Rev. Food Sci. Food Saf., 9, No. 5, 552-571 (2010).CrossRef M. Jamshidian, E. A. Tehrany, M. Imran, M. Jacquot, and S. Desobry, “Poly-lactic acid: production, applications, nanocomposites, and release studies,” Compr. Rev. Food Sci. Food Saf., 9, No. 5, 552-571 (2010).CrossRef
2.
go back to reference B. M. Tymrak, M. Kreiger, and J. M. Pearce, “Mechanical properties of components fabricated with open-source 3-D printers under realistic environmental conditions,” Materials & Design, 58, 242-246 (2014).CrossRef B. M. Tymrak, M. Kreiger, and J. M. Pearce, “Mechanical properties of components fabricated with open-source 3-D printers under realistic environmental conditions,” Materials & Design, 58, 242-246 (2014).CrossRef
3.
go back to reference G. W. Melenka, D. Eujin Pei, J. S. Schofield, M. R. Dawson, and J. P. Carey, “Evaluation of dimensional accuracy and material properties of the MakerBot 3D desktop printer,” Rapid Prototyping Journal,“ 21, No. 5, 618-627 (2015).CrossRef G. W. Melenka, D. Eujin Pei, J. S. Schofield, M. R. Dawson, and J. P. Carey, “Evaluation of dimensional accuracy and material properties of the MakerBot 3D desktop printer,” Rapid Prototyping Journal,“ 21, No. 5, 618-627 (2015).CrossRef
4.
go back to reference C. Casavola, A. Cazzato, V. Moramarco, and C. Pappalettere, “Orthotropic mechanical properties of fused deposition modelling parts described by classical laminate theory,” Materials & Design, 90, 453-458 (2016).CrossRef C. Casavola, A. Cazzato, V. Moramarco, and C. Pappalettere, “Orthotropic mechanical properties of fused deposition modelling parts described by classical laminate theory,” Materials & Design, 90, 453-458 (2016).CrossRef
5.
go back to reference Y. Zhao, Y. Chen, and Y. Zhou, “Novel mechanical models of tensile strength and elastic property of FDM AM PLA materials: Experimental and theoretical analyses,” Materials & Design, 181 (2019). Y. Zhao, Y. Chen, and Y. Zhou, “Novel mechanical models of tensile strength and elastic property of FDM AM PLA materials: Experimental and theoretical analyses,” Materials & Design, 181 (2019).
6.
go back to reference T. Yao, Z. Deng, K. Zhang, and S. Li, “A method to predict the ultimate tensile strength of 3D printing polylactic acid (PLA) materials with different printing orientations,” Composites Part B: Engineering, 163, 393-402 (2019).CrossRef T. Yao, Z. Deng, K. Zhang, and S. Li, “A method to predict the ultimate tensile strength of 3D printing polylactic acid (PLA) materials with different printing orientations,” Composites Part B: Engineering, 163, 393-402 (2019).CrossRef
7.
go back to reference T. Yao, J. Ye, Z. Deng, K. Zhang, Y. Ma, H. Ouyang, “Tensile failure strength and separation angle of FDM 3D printing PLA material: Experimental and theoretical analyses,” Composites Part B: Engineering, 188 (2020). T. Yao, J. Ye, Z. Deng, K. Zhang, Y. Ma, H. Ouyang, “Tensile failure strength and separation angle of FDM 3D printing PLA material: Experimental and theoretical analyses,” Composites Part B: Engineering, 188 (2020).
8.
go back to reference T. Yao, K. Zhang, Z. Deng, and J. Ye, “A novel generalized stress invariant-based strength model for inter-layer failure of FFF 3D printing PLA material,” Materials & Design, 193 (2020). T. Yao, K. Zhang, Z. Deng, and J. Ye, “A novel generalized stress invariant-based strength model for inter-layer failure of FFF 3D printing PLA material,” Materials & Design, 193 (2020).
9.
go back to reference S. Dai, Z. C. Deng, Y. J. Yu, K. Zhang, S. H. Wang, and J. Ye, “Orthotropic elastic behaviors and yield strength of fused deposition modeling materials: Theory and experiments,” Polymer Testing, 87 (2020). S. Dai, Z. C. Deng, Y. J. Yu, K. Zhang, S. H. Wang, and J. Ye, “Orthotropic elastic behaviors and yield strength of fused deposition modeling materials: Theory and experiments,” Polymer Testing, 87 (2020).
10.
go back to reference R. Chen, A. F. Kaplan, and D. G. Senesky, “Closed-form orthotropic constitutive model for aligned square array mesostructure,” Additive Manufacturing, 36 (2020). R. Chen, A. F. Kaplan, and D. G. Senesky, “Closed-form orthotropic constitutive model for aligned square array mesostructure,” Additive Manufacturing, 36 (2020).
11.
go back to reference X. Wang, L. Zhao, J. Y. H. Fuh, and H. P. Lee, “Effect of porosity on mechanical properties of 3D printed polymers: experiments and micromechanical modeling based on X-ray computed tomography analysis,” Polymers (Basel), 11 (2019). X. Wang, L. Zhao, J. Y. H. Fuh, and H. P. Lee, “Effect of porosity on mechanical properties of 3D printed polymers: experiments and micromechanical modeling based on X-ray computed tomography analysis,” Polymers (Basel), 11 (2019).
12.
13.
go back to reference J. F. Rodríguez, J. P. Thomas, and J. E. Renaud, “Mechanical behavior of acrylonitrile butadiene styrene fused deposition materials modeling,” Rapid Prototyping Journal, 9, No. 4, 219-230 (2003).CrossRef J. F. Rodríguez, J. P. Thomas, and J. E. Renaud, “Mechanical behavior of acrylonitrile butadiene styrene fused deposition materials modeling,” Rapid Prototyping Journal, 9, No. 4, 219-230 (2003).CrossRef
14.
go back to reference L. Li, Q. Sun, C. Bellehumeur, and P. Gu, “Composite modeling and analysis for fabrication of FDM prototypes with locally controlled properties,” Journal of Manufacturing Processes, 4, No. 2, 129-141 (2002).CrossRef L. Li, Q. Sun, C. Bellehumeur, and P. Gu, “Composite modeling and analysis for fabrication of FDM prototypes with locally controlled properties,” Journal of Manufacturing Processes, 4, No. 2, 129-141 (2002).CrossRef
15.
go back to reference V. D. Azzi and S. W. Tsai, “Anisotropic strength of composites,” Experimental Mechanics, 5, No. 9, 283-288 (1965).CrossRef V. D. Azzi and S. W. Tsai, “Anisotropic strength of composites,” Experimental Mechanics, 5, No. 9, 283-288 (1965).CrossRef
Metadata
Title
Characterization of Polylactic Acid Parts Produced Using the Fused Deposition Modelling
Authors
E. Zīle
D. Zeleniakiene
A. Aniskevich
Publication date
19-05-2022
Publisher
Springer US
Published in
Mechanics of Composite Materials / Issue 2/2022
Print ISSN: 0191-5665
Electronic ISSN: 1573-8922
DOI
https://doi.org/10.1007/s11029-022-10021-6

Other articles of this Issue 2/2022

Mechanics of Composite Materials 2/2022 Go to the issue

Premium Partners