Skip to main content
Disciplines
Automotive Business IT + Informatics Construction + Real Estate Electrical Engineering + Electronics Energy + Sustainability Insurance + Risk Finance + Banking Management + Leadership Marketing + Sales Mechanical Engineering + Materials
Events
DE
EN
Books
Journals
Topic Page
Marketing
Start single access now
Access for companies
EXTENDED SEARCH
Log in
Top
Published in:
Introduction Read chapter Read first chapter

2022 | OriginalPaper | Chapter

4. Characterization of Primary Defects and Quality Evaluation of Coatings

Authors : Guozheng Ma, Shuying Chen, Haidou Wang

Published in: Micro Process and Quality Control of Plasma Spraying

Publisher: Springer Nature Singapore

Log in

Activate our intelligent search to find suitable subject content or patents.

search-config
loading …

Abstract

Although coatings that are fabricated with supersonic plasma spraying technology have many advantageous properties, coating is in essence a heterogeneous material formed after sprayed particles are heated and melted at high temperature then spread and solidified on a substrate with the help of high-speed air flow acceleration, and this process inevitably leads to some internal and contact surface problems for the coating.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

  • über 102.000 Bücher
  • über 537 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Finance + Banking
  • Management + Führung
  • Marketing + Vertrieb
  • Maschinenbau + Werkstoffe
  • Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

inform now

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

  • über 67.000 Bücher
  • über 390 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Maschinenbau + Werkstoffe




 

Jetzt Wissensvorsprung sichern!

inform now
previous chapter Impact Spread Behavior of Flying Droplets and Properties of Splats
next chapter Coating Quality Control Based on Traditional Process Measures
Literature
1.
Stewart S, Ahmed R, Itsukaichi T (2005) Rolling contact fatigue of post-treated WC-NiCrBSi thermal spray coatings. Surf Coat Technol 190(2–3):171–189CrossRef
2.
Piao Z, Xu B, Wang H et al (2011) Investigation of fatigue failure prediction of Fe-Cr alloy coatings under rolling contact based on acoustic emission technique. Appl Surf Sci 257:2581–2586CrossRef
3.
Masakazu O, Satoshi Y, Yasuhiro Y et al (2013) Adhesion strength of ceramic top coat in thermal barrier coatings subjected to thermal cycles: effects of thermal cycle testing method and environment. Int J Fatigue 53:33–39CrossRef
4.
Wang H (2006) Q&A on thermal spraying technology. National Defense Industry Press
5.
Nakamura T, Qian G, Berndt CC (2010) Effects of pores on mechanical properties of plasma-sprayed ceramic coatings. J Am Ceram Soc 83(3):578–584CrossRef
6.
Chen S, Wang H, Ma G et al (2015) Fractal and statistical properties of the geometrical structure of natural pores within plasma sprayed coatings. Acta Phys Sin-Chin Ed 64(24):240504CrossRef
7.
Li JF, Ding CX (2000) Fractal character of circumferences of polishing-induced pull outs of plasma sprayed Cr3C2 NiCr coatings. Thin Solid Films 376(1–2):179–182CrossRef
8.
Zhu H, Ji CC (2011) Fractal theory and its application (in Chinese). Science Press, Beijing
9.
Piao Z, Xu B, Wang H et al (2010) Influence of undercoating on rolling contact fatigue performance of Fe-based coating. Tribol Int 43(1):252–258CrossRef
10.
Zhang Z, Wang H, Xu B et al (2015) Characterization of microstructure and rolling contact fatigue performance of NiCrBSi/WC–Ni composite coatings prepared by plasma spraying. Surf Coat Technol 261:60–68CrossRef
11.
Zhang SD, Zhang WL, Wang S et al. (2015) Characterisation of three-dimensional porosity in an Fe-based amorphous coating and its correlation with corrosion behaviour. Corros Sci 93:211–221
12.
Agrawal DC, Raj R (1989) Measurement of the ultimate shear strength of a metal-ceramic interface. Acta Metall 37(4):1265–1270CrossRef
13.
Chen S, Wang H, Xu B et al (2014) Investigation on the binding behavior of the interface within the supersonic plasma sprayed coating system based fractal theory. Acta Phys Sin-Chin Ed 63(15):156801CrossRef
14.
Xu Z, Yang Y, Huang P et al (2010) Determination of interfacial properties of thermal barrier coatings by shear test and inverse finite element method. Acta Mater 58(18):5972–5979CrossRef
15.
Zhang H, Li DY (2002) Determination of interfacial bonding strength using a cantilever bending method with in situ monitoring acoustic emission. Surf Coat Technol 155(2–3):190–194CrossRef
16.
Yang B, Chen G, Zhang K et al (2007) A review on measurement methods for interfacial bonding strength between coating and substrate. Adv Mech 37(1):67–79
17.
Beydon R, Bernhart G, Segui Y (2000) Measurement of metallic coatings adhesion to fibre reinforced plastic materials. Surf Coat Technol 126(1):39–47CrossRef
18.
Song Y, Xu B, Wang H et al (2011) Research status on measurement methods for spraying coating bonding strength. Eng Test 51(4):1–8
19.
Elizalde MR, Sánchez JM, Martínez-Esnaola JM et al. (2003) Interfacial fracture induced by cross-sectional nanoindentation in metal–ceramic thin film structures. Acta Mater 51(14):4295–4305
20.
Chicot D, Araujo P, Horny N et al (2005) Application of the interfacial indentation test for adhesion toughness determination. Surf Coat Technol 200(1–4):174–177CrossRef
21.
Hohlfelder RJ (1999) Bulge and blister testing of thin films and their interfaces [D]. Standford University, USA
22.
Bull SJ, Berasetegui EG (2006) An overview of the potential of quantitative coating adhesion measurement by scratch testing—ScienceDirect. Tribol Int 39(2):99–114
23.
Ang ASM, Berndt CC (2014) A review of testing methods for thermal spray coatings. Int Mater Rev 59(4):179–223CrossRef
24.
Oladijo OP, Venter AM, et al. (2012) X-ray diffraction measurement of residual stress in WC-Co thermally sprayed coatings onto metal substrates. Surf Coat Technol 206: 4725–4729
25.
Chen Q, Mao W, Zhou YC et al. (2010) Effect of Young's modulus evolution on residual stress measurement of thermal barrier coatings by X-ray diffraction. Appl Surf Sci 256(23):7311–7315
26.
Chen Y, Zhao X, Dang Y et al (2015) Characterization and understanding of residual stresses in a NiCoCrAlY bond coat for thermal barrier coating application. Acta Mater 94:1–14CrossRef
27.
Rogante M, Mikula P, Vrana M (2009) Through-the-thickness residual stress analysis by neutron diffraction in inoxidizable martensitic steel samples with and without tungsten carbide coating. Surf Coat Technol 204(5):650–656CrossRef
28.
Amanov A, Karimbaev R, Berkebile SP (2021) Effect of ultrasonic nanocrystal surface modification on wear mechanisms of thermally-sprayed WC-Co coating. Wear 477(18):203873
29.
Yu Z, Liu C, Kong X et al (2017) Experiment and numerical simulation for laser ultrasonic measurement of residual stress. Ultrasonics 73:271–276CrossRef
30.
Wang HD, Zhu LN, Xing ZG (2013) Surface residual stress detection technology. Machinery Industry Press
31.
Yang L, Yang F, Long Y et al (2014) Evolution of residual stress in air plasma sprayed yttria stabilised zirconia thermal barrier coatings after isothermal treatment. Surf Coat Technol 251(29):98–105CrossRef
32.
Ohtsuka S, Zhu W, Tochino S, et al. (2007) In-depth analysis of residual stress in an alumina coating on silicon nitride substrate using confocal Raman piezo-spectroscopy. Acta Mater 55(4):1129–1135
33.
Ma R, Cheng X, Ye W et al (2015) SiC fiber and yttria-stabilized zirconia composite thick thermal barrier coatings fabricated by plasma spray. Appl Surf Sci J Devoted Prop Interfaces Relat Synth Behav Mater 357:407–412
34.
Lima CRC, Dosta S, Guilemany JM et al (2016) The application of photoluminescence piezospectroscopy for residual stresses measurement in thermally sprayed TBCs. Surf Coat Technol 318(318):147–156
35.
Zhu J, Xie H, Hu Z et al (2012) Cross-Sectional residual stresses in thermal spray coatings measured by moiré interferometry and nanoindentation technique. J Therm Spray Technol 21(5):810–817CrossRef
36.
Yi J, Xu B, Wang H et al (2011) Determination of residual stresses within plasma spray coating using moiré interferometry method. Appl Surf Sci 257(6):2332–2336CrossRef
37.
Santana YY, Renault PO, Sebastiani M et al (2008) Characterization and residual stresses of WC-Co thermally sprayed coatings. Surf Coat Technol 202(18):4560–4565CrossRef
38.
Ghasemi AR, Mohammadi MM (2016) Residual stress measurement of fiber metal laminates using incremental hole-drilling technique in consideration of the integral method. Int J Mech Sci 114:246–256CrossRef
39.
Santana YY, Barbera-Sosa JGL, Staia MH et al (2006) Measurement of residual stress in thermal spray coatings by the incremental hole drilling method. Surf Coat Technol 201(5):2092–2098CrossRef
40.
Bolshakov A, Oliver WC, Pharr GM (1996) Influences of stress on the measurement of mechanical properties using nanoindentation: Part II. Finite element simulations. J Mater Res 11(3):760–768
41.
Zhu L, Xu B, Wang H et al (2012) Effect of residual stress on the nanoindentation response of (100) copper single crystal. Mater Chem Phys 136(2–3):561–565CrossRef
42.
Salvati E, Korsunsky AM (2017) An analysis of macro- and micro-scale residual stresses of Type I, II and III using FIB-DIC micro-ring-core milling and crystal plasticity FE modeling. Int J Plast 98:123–138CrossRef
43.
Winiarski B, Benedetti M, Fontanari V et al (2016) High spatial resolution evaluation of residual stresses in shot peened specimens containing sharp and blunt notches by micro-hole drilling, micro-slot cutting and micro-X-ray diffraction methods. Exp Mech 56(8):1449–1463CrossRef
44.
Lunt AJG, Korsunsky AM (2015) A review of micro-scale focused ion beam milling and digital image correlation analysis for residual stress evaluation and error estimation. Surf Coat Technol 283:373–388CrossRef
45.
Sebastiani M, Eberl C, Bemporad E et al (2014) Focused ion beam four-slot milling for Poisson’s ratio and residual stress evaluation at the micron scale. Surf Coat Technol 251:151–161CrossRef
46.
Massl S, Pippan JKR (2007) A direct method of determining complex depth profiles of residual stresses in thin films on a nanoscale-mechanics of residually stressed systems. Acta Mater 55(14):4835–4844CrossRef
47.
Sebastiani M, Bolelli G, Lusvarghi L et al (2012) High resolution residual stress measurement on amorphous and crystalline plasma-sprayed single-splats. Surf Coat Technol 206(23):4872–4880CrossRef
48.
Sebastiani M, Eberl C, Bemporad E et al (2011) Depth-resolved residual stress analysis of thin coatings by a new FIB-DIC method. Mater Sci Eng A 528(27):7901–7908CrossRef
49.
Kang KJ, Yao N, He MY et al (2003) A method for in situ measurement of the residual stress in thin films by using the focused ion beam. Thin Solid Films 443(1):71–77CrossRef
50.
Sabate N, Vogel D, Gollhardt A et al (2007) Residual stress measurement on a MEMS structure with high-spatial resolution. J Microelectromech Syst 16(2):365–372CrossRef
51.
Korsunsky AM, Sebastiani M, Bemporad E (2009) Focused ion beam ring drilling for residual stress evaluation. Mater Lett 63(22):1961–1963CrossRef
52.
Krottenthaler M, Schmid C, Schaufler J et al (2013) A simple method for residual stress measurements in thin films by means of focused ion beam milling and digital image correlation. Surf Coat Technol 215(4):247–252CrossRef
Metadata
Title
Characterization of Primary Defects and Quality Evaluation of Coatings
Authors
Guozheng Ma
Shuying Chen
Haidou Wang
Copyright Year
2022
Publisher
Springer Nature Singapore
Book
Micro Process and Quality Control of Plasma Spraying

Print ISBN: 978-981-19-2741-6

Electronic ISBN: 978-981-19-2742-3

Copyright Year: 2022

DOI
https://doi.org/10.1007/978-981-19-2742-3_4

Premium Partners

    Image Credits