Top

Published in:

2018 | OriginalPaper | Chapter

6. Cold Spray Additive Manufacture and Component Restoration

Authors : Shuo Yin, Barry Aldwell, Rocco Lupoi

Published in: Cold-Spray Coatings

Publisher: Springer International Publishing

Activate our intelligent search to find suitable subject content or patents.

search-config

AI-assisted search

Off

Abstract

Cold spray, originally developed as a coating technique, is now applied as an additive manufacturing process to fabricate freestanding components and restore damaged components. Having low working temperature, cold spray additive manufacturing (CSAM) and cold spray restoration (CSR) have the ability to retain the original feedstock properties and prevent adverse influence on the underlying substrate materials. These superior merits are not achievable through conventional high-temperature additive manufacturing processes, thereby CSAM and CSR are attracting great attentions from both scientific and industrial communities. During the past decade, investigations of CSAM and CSR have been widely conducted. Existing works mainly focused on applications, product properties, processing parameters optimization, spray strategy, and robot control. Despite having a large number of reports, a systematic summarization and review on these works has yet to be carried out. Therefore, in this chapter, the existing CSAM and CSR works were summarized and reviewed for the purpose of systematically introducing the progress of CSAM and CSR techniques.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

inform now

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

inform now

previous chapter Structure–Properties Relations in High-Pressure Cold-Sprayed Deposits

next chapter Advances in Titanium on Aluminium Alloys Cold Spray Coatings

Abolghasemi Fakhri M, Bordatchev EV, Tutunea-Fatan OR (2012) An image-based methodology to establish correlations between porosity and cutting force in micromilling of porous titanium foams. Int J Adv Manuf Technol 60:841–851. https://doi.org/10.1007/s00170-011-3647-1 CrossRef

Abreeza M, Yuji I, Kazuhiro O (2011) Computational simulation for cold sprayed deposition. ELyT Laboratory Workshop, Sendai

Aziz MSA, Ueda T, Furumoto T, Abe S, Hosokawa A, Yassin A (2012) Study on machinability of laser sintered materials fabricated by layered manufacturing system: influence of different hardness of sintered materials. Procedia CIRP 4:79–83. https://doi.org/10.1016/j.procir.2012.10.015 CrossRef

Barnett B, Trexler M, Champagne V (2015) Cold sprayed refractory metals for chrome reduction in gun barrel liners. Int J Refract Met Hard Mater 53:139–143. https://doi.org/10.1016/j.ijrmhm.2015.07.007 CrossRef

Bierk B, Mgr G, Addison G, Elmquist B (2011) Repair Technology Development Projects, In: CSAT Workshop. Worcester, USA

Binder K, Gottschalk J, Kollenda M, Gärtner F, Klassen T (2011) Influence of impact angle and gas temperature on mechanical properties of titanium cold spray deposits. J Therm Spray Technol 20:234–242. https://doi.org/10.1007/s11666-010-9557-1 CrossRef

Birtch W (2010) Practical cold spray. https://www.supersonicspray.com. Accessed 3 June 2014

Blose RE, Walker BH, Walker RM, Froes SH (2006) New opportunities to use cold spray process for applying additive features to titanium alloys. Met Powder Rep 61:30–37. https://doi.org/10.1016/S0026-0657(06)70713-5 CrossRef

Boeing Standards D6-51343 (2006) Thermal spray repair of exterior clad aluminum. USA

Bordin A, Ghiotti A, Bruschi S, Facchini L, Bucciotti F (2014) Machinability characteristics of wrought and EBM CoCrMo alloys. Procedia CIRP 14:89–94. https://doi.org/10.1016/j.procir.2014.03.082 CrossRef

Briefing T (2013) Metal coated particles and defense applications. In: CSAT Workshop. Worcester, USA

Cai Z, Deng S, Liao H, Zeng C, Montavon G (2014) The effect of spray distance and scanning step on the coating thickness uniformity in cold spray process. J Therm Spray Technol 23:354–362. https://doi.org/10.1007/s11666-013-0002-0 CrossRef

Cai Z, Liang H, Quan S, Deng S, Zeng C, Zhang F (2015) Computer-aided robot trajectory auto-generation strategy in thermal spraying. J Therm Spray Technol 24:1235–1245. https://doi.org/10.1007/s11666-015-0282-7 CrossRef

Cai Z, Chen T, Zeng C, Guo X, Lian H, Zheng Y, Wei X (2016) A global approach to the optimal trajectory based on an improved ant Colony algorithm for cold spray. J Therm Spray Technol 25:1631–1637. https://doi.org/10.1007/s11666-016-0468-7 CrossRef

Candel A, Gadow R (2009) Trajectory generation and coupled numerical simulation for thermal spraying applications on complex geometries. J Therm Spray Technol 18:981–987. https://doi.org/10.1007/s11666-009-9338-x CrossRef

Chad H (2014) CSIRO Titanium Technologies and Additive Manufacturing, Future Manufacturing Flagship. https://www.atse.org.au/Documents/Events/SA%20Manufacturing/chad-henry-titanium-technologies.pdf. Accessed 13 Nov 2016

Champagne V, Helfritch D (2016) The unique abilities of cold spray deposition. Int Mater Rev 6608:1–19. https://doi.org/10.1080/09506608.2016.1194948

Champagne VK, Helfritch D, Leyman PF (2008) Magnesium repair by cold spray. Plat Surf Finish 95:19–28

Champagne VK, Helfritch DJ, Dinavahi SPG, Leyman PF (2011) Theoretical and experimental particle velocity in cold spray. J Therm Spray Technol 20:425–431. https://doi.org/10.1007/s11666-010-9530-z CrossRef

Chen C, Gojon S, Xie Y, Yin S, Verdy C, Ren Z, Liao H, Deng S (2016a) A novel spiral trajectory for damage component recovery with cold spray. Surf Coat Technol. https://doi.org/10.1016/j.surfcoat.2016.10.096

Chen C, Xie Y, Verdy C, Liao H, Deng S (2016b) Modelling of coating thickness distribution and its application in offline programming software. Surf Coat Technol. https://doi.org/10.1016/j.surfcoat.2016.10.044

Choi HJ, Lee M, Lee JY (2010) Application of a cold spray technique to the fabrication of a copper canister for the geological disposal of CANDU spent fuels. Nucl Eng Des 240:2714–2720. https://doi.org/10.1016/j.nucengdes.2010.06.038 CrossRef

Cormier Y, Dupuis P, Jodoin B, Corbeil A (2013) Net shape fins for compact heat exchanger produced by cold spray. J Therm Spray Technol 22:1210–1221. https://doi.org/10.1007/s11666-013-9968-x CrossRef

Cormier Y, Dupuis P, Farjam A, Corbeil A, Jodoin B (2014a) Additive manufacturing of pyramidal pin fins: height and fin density effects under forced convection. Int J Heat Mass Transf 75:235–244. https://doi.org/10.1016/j.ijheatmasstransfer.2014.03.053 CrossRef

Cormier Y, Dupuis P, Jodoin B, Corbeil A (2014b) Mechanical properties of cold gas dynamic-sprayed near-net-shaped fin arrays. J Therm Spray Technol 24:476–488. https://doi.org/10.1007/s11666-014-0203-1 CrossRef

Cormier Y, Dupuis P, Jodoin B, Ghaei A (2015) Finite element analysis and failure mode characterization of pyramidal fin arrays produced by masked cold gas dynamic spray. J Therm Spray Technol 24:1549–1565. https://doi.org/10.1007/s11666-015-0317-0 CrossRef

Cormier Y, Dupuis P, Jodoin B, Corbeil A (2016) Pyramidal fin arrays performance using streamwise anisotropic materials by cold spray additive manufacturing. J Therm Spray Technol 25:170–182. https://doi.org/10.1007/s11666-015-0267-6 CrossRef

Czampa M, Markos S, Szalay T (2013) Improvement of drilling possibilities for machining powder metallurgy materials. Procedia CIRP 7:288–293. https://doi.org/10.1016/j.procir.2013.05.049 CrossRef

DeForce B, Eden T, Potter J, Champagne V, Leyman P, Helfritch D (2007) Application of aluminum coatings for the corrosion protection of magnesium by cold spray. In: Tri-Service Corrosion Conference. Denver, USA

Deng S, Chen C (2015) Generation of robot trajectory for thermal spray. In: Adams W (ed) Robot kinematics and motion planning. Nova Science Publishers, New York

Deng S, Cai Z, Fang D, Liao H, Montavon G (2012) Application of robot offline programming in thermal spraying. Surf Coat Technol 206:3875–3882. https://doi.org/10.1016/j.surfcoat.2012.03.038 CrossRef

Deng S, Liang H, Cai Z, Liao H, Montavon G (2014) Kinematic optimization of robot trajectories for thermal spray coating application. J Therm Spray Technol 23:1382–1389. https://doi.org/10.1007/s11666-014-0137-7 CrossRef

Dupuis P, Cormier Y, Fenech M, Corbeil A, Jodoin B (2016a) Flow structure identification and analysis in fin arrays produced by cold spray additive manufacturing. Int J Heat Mass Transf 93:301–313. https://doi.org/10.1016/j.ijheatmasstransfer.2015.10.019 CrossRef

Dupuis P, Cormier Y, Fenech M, Jodoin B (2016b) Heat transfer and flow structure characterization for pin fins produced by cold spray additive manufacturing. Int J Heat Mass Transf 98:650–661. https://doi.org/10.1016/j.ijheatmasstransfer.2016.03.069 CrossRef

Fang D, Deng S, Liao H, Coddet C (2010) The effect of robot kinematics on the coating thickness uniformity. J Therm Spray Technol 19:796–804. https://doi.org/10.1007/s11666-010-9470-7 CrossRef

Farjam A, Cormier Y, Dupuis P, Jodoin B, Corbeil A (2015) Influence of alumina addition to Aluminum fins for compact heat exchangers produced by cold spray additive manufacturing. J Therm Spray Technol 24:1256–1268. https://doi.org/10.1007/s11666-015-0305-4 CrossRef

Gilmore DL, Dykhuizen RC, Neiser RA, Roemer TJ, Smith MF (1999) Particle velocity and deposition efficiency in the cold spray process. J Therm Spray Technol 8:576–582. https://doi.org/10.1361/105996399770350278 CrossRef

Goldbaum D, Manimuda P, Kamath G, Descartes S, Klemberg-Sapieha JE, Chromik RR (2016) Tribological behavior of TiN and Ti (Si,C)N coatings on cold sprayed Ti substrates. Surf Coat Technol 291:264–275. https://doi.org/10.1016/j.surfcoat.2016.02.044 CrossRef

Han T, Zhao Z, Gillispie BA, Smith JR (2005) Effects of spray conditions on coating formation by the kinetic spray process. J Therm Spray Technol 14:373–383. https://doi.org/10.1361/105996305X59369 CrossRef

Howe C (2014) Cold spray repair of the CH-47 accessory cover. In: CSAT Workshop. Worcester, USA

Howe C (2015) Cold spray qualification of T700 engine front frame. In: CSAT Workshop. Worcester, USA

Jakupi P, Keech PG, Barker I, Ramamurthy S, Jacklin RL, Shoesmith DW, Moser DE (2015) Characterization of commercially cold sprayed copper coatings and determination of the effects of impacting copper powder velocities. J Nucl Mater 466:1–11. https://doi.org/10.1016/j.jnucmat.2015.07.001 CrossRef

Jones R, Matthews N, Rodopoulos CA, Cairns K, Pitt S (2011) On the use of supersonic particle deposition to restore the structural integrity of damaged aircraft structures. Int J Fatigue 33:1257–1267. https://doi.org/10.1016/j.ijfatigue.2011.03.013 CrossRef

Jones R, Matthews N, Elston J, Cairns K, Baker J, Wadsley B, Pitt S (2012) SPD repairs to thin aluminium structures. In: 28th International Congress of the Aeronautical Sciences. Brisbane, Australia

Jones R, Molent L, Barter S, Matthews N, Tamboli D (2014) Supersonic particle deposition as a means for enhancing the structural integrity of aircraft structures. Int J Fatigue 68:260–268. https://doi.org/10.1016/j.ijfatigue.2014.03.013 CrossRef

Kashirin A, Klyuev O, Buzdygar T, Shkodkin A (2011) Modern applications of the low pressure cold spray. International Thermal Spray Conference, Hamburg

Kilchenstein G (2014) Cold spray technologies used for repair. In: JTEG Monthly Teleconference. http://jteg.ncms.org/wp-content/gallery/ColdSpray/ColdSpray_SlideDeck.pdf. Accessed 9 Nov 2016

Kotoban D, Grigoriev S, Okunkova A, Sova A (2016) Influence of a shape of single track on deposition efficiency of 316L stainless steel powder in cold spray. Surf Coat Technol. https://doi.org/10.1016/j.surfcoat.2016.10.052

Kumar S, Chavan NM (2011) Cold spray coating technology: activities at ARCI. International Advanced Reserch Centre for Powder Metallurgy and New Materials, Hyderabad

Lee JC, Kang HJ, Chu WS, Ahn SH (2007) Repair of damaged mold surface by cold-spray method. CIRP Ann – Manuf Technol 56:577–580. https://doi.org/10.1016/j.cirp.2007.05.138 CrossRef

Leyman PF, Champagne VK (2009) Cold spray process development for the reclamation of the Apache helicopter mast support. Report No.: ARL-TR-4922. Army Research Laboratory, MD, USA

Li CJ, Li WY, Wang YY, Yang GJ, Fukanuma H (2005) A theoretical model for prediction of deposition efficiency in cold spraying. Thin Solid Films 489:79–85. https://doi.org/10.1016/j.tsf.2005.05.002 CrossRef

Li CJ, Li WY, Liao H (2006) Examination of the critical velocity for deposition of particles in cold spraying. J Therm Spray Technol 15:212–222. https://doi.org/10.1361/105996306X108093 CrossRef

Li WY, Zhang C, Guo XP, Zhang G, Liao HL, Li CJ, Coddet C (2008) Effect of standoff distance on coating deposition characteristics in cold spraying. Materials and DesignMater Des 29:297–304. https://doi.org/10.1016/j.matdes.2007.02.005 CrossRef

Lu G, Lu GQ, Xiao ZM (1999) Mechanical properties of porous materials. J Porous Mater 6:359–368. https://doi.org/10.1023/A:1009669730778 CrossRef

Luo XT, Li YJ, Li CX, Yang GJ, Li CJ (2016) Effect of spray conditions on deposition behavior and microstructure of cold sprayed Ni coatings sprayed with a porous electrolytic Ni powder. Surf Coat Technol 289:85–93. https://doi.org/10.1016/j.surfcoat.2016.01.058 CrossRef

Lyalyakin VP, Kostukov AY, Denisov VA (2016) Special features of reconditioning the housing of a caterpillar diesel oil pump by gas-dynamic spraying. Weld Int 30:68–70. https://doi.org/10.1080/09507116.2015.1030152 CrossRef

MacDonald D, Fernández R, Delloro F, Jodoin B (2016) Cold spraying of Armstrong process titanium powder for additive manufacturing. J Therm Spray Technol. https://doi.org/10.1007/s11666-016-0489-2

Maev RG, Strumban E, Leshchinskiy V, Dzhurinskiy D (2014) Repair applications of the LPCS process. In: CSAT Workshop. Worcester, USA

Matthews N, Jones R, Sih GC (2014) Application of supersonic particle deposition to enhance the structural integrity of aircraft structures. Sci China Phys Mech Astron 57:12–18. https://doi.org/10.1007/s11433-013-5367-z CrossRef

May C, Marx S, Paul A (2013) Selected R&D results and industrial applications. In: CSAT Workshop, Worcester, USA

Montevecchi F, Grossi N, Takagi H, Scippa A, Sasahara H, Campatelli G (2016) Cutting forces analysis in additive manufactured AISI H13 alloy. Procedia CIRP 46:476–479. https://doi.org/10.1016/j.procir.2016.04.034 CrossRef

Morgan R, Fox P, Pattison J, Sutcliffe C, O’Neill W (2004) Analysis of cold gas dynamically sprayed aluminium deposits. Mater Lett 58:1317–1320. https://doi.org/10.1016/j.matlet.2003.09.048 CrossRef

Moridi A, Hassani Gangaraj SM, Vezzu S, Guagliano M (2014) Number of passes and thickness effect on mechanical characteristics of cold spray coating. Procedia Eng 74:449–459. https://doi.org/10.1016/j.proeng.2014.06.296 CrossRef

Papyrin A (2001) Cold spray technology. Adv Mater Process 159:49–51

Pattison J, Celotto S, Morgan R, Bray M, O’Neill W (2007) Cold gas dynamic manufacturing: a non-thermal approach to freeform fabrication. Int J Mach Tools Manuf 47:627–634. https://doi.org/10.1016/j.ijmachtools.2006.05.001 CrossRef

Pattison J, Celotto S, Khan A, O’Neill W (2008) Standoff distance and bow shock phenomena in the cold spray process. Surf Coat Technol 202:1443–1454. https://doi.org/10.1016/j.surfcoat.2007.06.065 CrossRef

Ramulu M, Rao PN, Kao H (2002) Drilling of (Al₂O₃)p/6061 metal matrix composites. J Mater Process Technol 124:244–254. https://doi.org/10.1016/S0924-0136(02)00176-0 CrossRef

Rech S, Trentin A, Vezzù S, Vedelago E, Legoux JG, Irissou E (2014) Different cold spray deposition strategies: single- and multi-layers to repair aluminium alloy components. J Therm Spray Technol 6061:1237–1250. https://doi.org/10.1007/s11666-014-0141-y CrossRef

Richter P (2014) New value chain for advanced coatings by using cold spray. In: Industrial Technologies 2014 – Smart Growth through Research and Innovation. Athens, Greece

Schell J (2016) Cold spray aerospace applications. In: CSAT Workshop, Worcester, USA

Security E, Program TC (2011) Cost and performance report cold spray for repair of magnesium. http://www.dtic.mil/dtic/tr/fulltext/u2/a572962.pdf. Accessed 28 Oct 2016

Sova A, Grigoriev S, Okunkova A, Smurov I (2013) Potential of cold gas dynamic spray as additive manufacturing technology. Int J Adv Manuf Technol 69:2269–2278. https://doi.org/10.1007/s00170-013-5166-8 CrossRef

Stier O (2014) Fundamental cost analysis of cold spray. J Therm Spray Technol 23:131–139. https://doi.org/10.1007/s11666-013-9972-1 CrossRef

Stoltenhoff T, Zimmermann F (2012) LOXPlate® coatings for aluminum aerospace components exposed to high dynamic stresses. Praxair Surface Technologies GmbH, Ratingen

Tabbara H, Gu S, McCartney DG, Price TS, Shipway PH (2011) Study on process optimization of cold gas spraying. J Therm Spray Technol 20:608–620. https://doi.org/10.1007/s11666-010-9564-2 CrossRef

Tutunea-Fatan OR, Fakhri MA, Bordatchev EV (2011) Porosity and cutting forces: from macroscale to microscale machining correlations. Proc Inst Mech Eng Part B J Eng Manuf 225:619–630. https://doi.org/10.1177/2041297510394057 CrossRef

Vilardell AM, Cinca N, Concustell A, Dosta S, Cano IG, Guilemany JM (2015) Cold spray as an emerging technology for biocompatible and antibacterial coatings: state of art. J Mater Sci 4441–4462. doi:https://doi.org/10.1007/s10853-015-9013-1

Villa M, Dosta S, Guilemany JM (2013) Optimization of 316L stainless steel coatings on light alloys using cold gas spray. Surf Coat Technol 235:220–225. https://doi.org/10.1016/j.surfcoat.2013.07.036 CrossRef

Villafuerte J (2015) Using cold spray to add features to components. http://www.coldsprayteam.com/files/Villafuerte%20CSAT%20using%20CS%20to%20add%20features.pdf. Accessed 27 Oct 2016

Widener CA, Carter MJ, Ozdemir OC, Hrabe RH, Hoiland B, Stamey TE, Champagne VK, Eden TJ (2016) Application of high-pressure cold spray for an internal bore repair of a navy valve actuator. J Therm Spray Technol 25:193–201. https://doi.org/10.1007/s11666-015-0366-4 CrossRef

Xiong Y, Zhuang W, Zhang M (2015) Effect of the thickness of cold sprayed aluminium alloy coating on the adhesive bond strength with an aluminium alloy substrate. Surf Coat Technol 270:259–265. https://doi.org/10.1016/j.surfcoat.2015.02.048 CrossRef

Yandouzi M, Gaydos S, Guo D, Ghelichi R, Jodoin B (2014) Aircraft skin restoration and evaluation. J Therm Spray Technol 23:1281–1290. https://doi.org/10.1007/s11666-014-0130-1 CrossRef

Yin S, Wang X, Li W, Liao H, Jie H (2012) Deformation behavior of the oxide film on the surface of cold sprayed powder particle. Appl Surf Sci 259:294–300. https://doi.org/10.1016/j.apsusc.2012.07.036 CrossRef

Yin S, Suo X, Su J, Guo Z, Liao H, Wang X (2013) Effects of substrate hardness and spray angle on the deposition behavior of cold-sprayed Ti particles. J Therm Spray Technol 23:76–83. https://doi.org/10.1007/s11666-013-0039-0 CrossRef

Yin S, Liu Q, Liao H, Wang X (2014) Effect of injection pressure on particle acceleration, dispersion and deposition in cold spray. Comput Mater Sci 90:7–15. https://doi.org/10.1016/j.commatsci.2014.03.055 CrossRef

Yin S, Suo X, Xie Y, Li W, Lupoi R, Liao H (2015) Effect of substrate temperature on interfacial bonding for cold spray of Ni onto cu. J Mater Sci 50:7448–7457. https://doi.org/10.1007/s10853-015-9304-6 CrossRef

Yin S, Xie Y, Cizek J, Ekoi E, Hussain T, Dowling D, Lupoi R (2017) Advanced diamond-reinforced metal matrix composites via cold spray: properties and deposition mechanism. Compos Part B Eng. https://doi.org/10.1016/j.compositesb.2017.01.009

Title: Cold Spray Additive Manufacture and Component Restoration
Authors: Shuo Yin
Barry Aldwell
Rocco Lupoi
Publisher: Springer International Publishing
Book: Cold-Spray Coatings
Print ISBN: 978-3-319-67182-6

Electronic ISBN: 978-3-319-67183-3

Copyright Year: 2018
DOI: https://doi.org/10.1007/978-3-319-67183-3_6

Springer Professional

Abstract

Please log in to get access to your license.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Premium Partners