Top

Published in:

2018 | OriginalPaper | Chapter

19. Cold Spray Coatings for Biomedical Applications

Authors : Sergi Dosta, Nuria Cinca, Anna M. Vilardell, Irene G. Cano, José Maria Guilemany

Published in: Cold-Spray Coatings

Publisher: Springer International Publishing

Activate our intelligent search to find suitable subject content or patents.

search-config

AI-assisted search

Off

Abstract

Cold spraying (CS) offers many advantages in front of the conventional thermal spraying processes and is becoming competitive in several industrial sectors. The biomedical industry is a quite well-established field, but still there are many challenges to solve where improvements in surface engineering can play a great role. The use of coatings in biomaterials has been fundamental on the improvement of mechanical as well as biological properties, thus, ameliorating human quality life. Studies about cold-sprayed coatings are emerging in orthopedics industry (internal fixation systems and prosthesis) as well as for antibacterial purposes (in body and touch external surfaces). These works are very new, and most deal with the improvement of biocompatibility and bioactivity of hard tissue replacement. Several combinations of substrate and coating materials are attempted, even trying to overcome any limitation on the spraying of ductile materials; biocompatible metallic materials, bioactive ceramics and polymers, and combinations have been successfully deposited by this method. Therefore, research on biocoatings is in constant development with the aim to produce implant surfaces that provide a balance between cell adhesion and low cytotoxicity, mechanical properties, and functionalization.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

inform now

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

inform now

previous chapter Fatigue Properties and Crack Behavior of Cold Spray Coatings

Akedo J (2006) Aerosol deposition of ceramic thick films at room temperature: densification mechanism of ceramic layers. J Am Ceram Soc 89:1834–1839. https://doi.org/10.1111/j.1551-2916.2006.01030.x CrossRef

Akedo J (2008) Room temperature impact consolidation (RTIC) of fine ceramic powder by aerosol deposition method and applications to microdevices. J Therm Spray Technol 17:181–198. https://doi.org/10.1007/s11666-008-9163-7 CrossRef

AL-Mangour B, Dallala R, Zhim F et al (2013a) Fatigue behavior of annealed cold-sprayed 316L stainless steel coating for biomedical applications. Mater Lett 91:352–355. https://doi.org/10.1016/j.matlet.2012.10.030 CrossRef

AL-Mangour B, Mongrain R, Irissou E, Yue S (2013b) Improving the strength and corrosion resistance of 316L stainless steel for biomedical applications using cold spray. Surf Coat Technol 216:297–307. https://doi.org/10.1016/j.surfcoat.2012.11.061 CrossRef

Kang AS, Singh G, Chawla V (2013) Some problems associated with thermal sprayed HA coatings: a review. Int J Surf Eng Mater Technol 3(1):10–14

Arifin A, Sulong AB, Muhamad N et al (2014) Material processing of hydroxyapatite and titanium alloy (HA/Ti) composite as implant materials using powder metallurgy: a review. Mater Des 55:165–175. https://doi.org/10.1016/j.matdes.2013.09.045 CrossRef

Bae G, Kang K, Kim J-J, Lee C (2010) Nanostructure formation and its effects on the mechanical properties of kinetic sprayed titanium coating. Mater Sci Eng A 527:6313–6319. https://doi.org/10.1016/j.msea.2010.06.037 CrossRef

Balla VK, Bodhak S, Bose S, Bandyopadhyay A (2010) Porous tantalum structures for bone implants: fabrication, mechanical and in vitro biological properties. Acta Biomater 6:3349–3359CrossRef

Bauer S, Schmuki P, von der Mark K, Park J (2013) Engineering biocompatible implant surfaces. Prog Mater Sci 58:261–326. https://doi.org/10.1016/j.pmatsci.2012.09.001 CrossRef

Binder K, Gottschalk J, Kollenda M et al (2011) Influence of impact angle and gas temperature on mechanical properties of titanium cold spray deposits. J Therm Spray Technol 20:234–242. https://doi.org/10.1007/s11666-010-9557-1 CrossRef

Bobyn JD, Stackpool GJ, Hacing SA, Tanzer M, Krygier JJ (1999) Characteristics of bone ingrowth and interface mechanics of a new porous tantalum biomaterial. J Bone Joint Surg Br 81:907–914CrossRef

Bosco R, Van Den Beucken J, Leeuwenburgh S, Jansen J (2012) Surface engineering for bone implants: a trend from passive to active surfaces. Coat 2:95–119. https://doi.org/10.3390/coatings2030095 CrossRef

Byrne GD, O’Neill L, Twomey B, Dowling DP (2013) Comparison between shot peening and abrasive blasting processes as deposition methods for hydroxyapatite coatings onto a titanium alloy. Surf Coat Technol 216:224–231. https://doi.org/10.1016/j.surfcoat.2012.11.048 CrossRef

Champagne V, Helfritch D (2013) A demonstration of the antimicrobial effectiveness of various copper surfaces. J Biol Eng 7:1–7CrossRef

Chen MW, McCauley JW, Dandekar DP, Bourne NK (2006) Dynamic plasticity and failure of high-purity alumina under shock loading. Nat Mater 5:614–618CrossRef

Chen Y, Bakshi SR, Agarwal A (2010) Correlation between nanoindentation and nanoscratch properties of carbon nanotube reinforced aluminum composite coatings. Surf Coat Technol 204:2709–2715. https://doi.org/10.1016/j.surfcoat.2010.02.024 CrossRef

Choudhuri A, Mohanty PS, Karthikeyan J (2009) Bio-ceramic composite coatings by cold spray technology. In: Proceedings of the international thermal spray conference, pp 391–396

Chun D-M, Ahn S-H (2011) Deposition mechanism of dry sprayed ceramic particles at room temperature using a nano-particle deposition system. Acta Mater 59:2693–2703. https://doi.org/10.1016/j.actamat.2011.01.007 CrossRef

Chun D-M, Choi J-O, Lee CS, Ahn S-H (2012) Effect of stand-off distance for cold gas spraying of fine ceramic particles (<5μm) under low vacuum and room temperature using nano-particle deposition system (NPDS). Surf Coat Technol 206:2125–2132. https://doi.org/10.1016/j.surfcoat.2011.09.043 CrossRef

Cinca N, Vilardell AM, Dosta S et al (2016) A new alternative for obtaining nanocrystalline bioactive coatings: study of hydroxyapatite deposition mechanisms by cold gas spraying. J Am Ceram Soc 99:1420–1428. https://doi.org/10.1111/jace.14076 CrossRef

Cizek J, Kovarik O, Siegl J et al (2013) Influence of plasma and cold spray deposited Ti layers on high-cycle fatigue properties of Ti6Al4V substrates. Surf Coat Technol 217:23–33. https://doi.org/10.1016/j.surfcoat.2012.11.067 CrossRef

Dikici B, Ozdemir I, Topuz M (2016) Cold spray deposition of SS316L powders on Al5052 substrates and their potential using for Biomedical applications. Int J Chem Mol Nucls Mater Metall Eng 10(4):483–487

El-Eskandrany MS, Al-Azmi A (2016) Potential applications of cold sprayed Cu50Ti20Ni30 metallic glassy alloy powders for antibacterial protective coating in medical and food sectors. J Mech Behav Biomed Mater 56:183–194. https://doi.org/10.1016/j.jmbbm.2015.11.030 CrossRef

Frattolin J, Barua R, Aydin H et al (2016) Development of a novel biodegradable metallic stent based on microgalvanic effect. Ann Biomed Eng 44:404–418. https://doi.org/10.1007/s10439-015-1458-5 CrossRef

Gardon M, Latorre A, Torrell M et al (2013) Cold gas spray titanium coatings onto a biocompatible polymer. Mater Lett 106:97–99. https://doi.org/10.1016/j.matlet.2013.04.115 CrossRef

Gardon M, Melero H, Garcia-Giralt N, Dosta S, Cano IG, Guilemany JM (2014) Enhancing the bioactivity of polymeric implants by means of cold gas spray coatings. J Biomed Mater Res Part B. 102(7):1537–1543CrossRef

Gbureck U, Masten A, Probst J, Thull R (2003) Tribochemical structuring and coating of implant metal surfaces with titanium oxide and hydroxyapatite layers. Mater Sci Eng C 23:461–465. https://doi.org/10.1016/S0928-4931(02)00322-3 CrossRef

Gledhill H (2001) In vitro fatigue behaviour of vacuum plasma and detonation gun sprayed hydroxyapatite coatings. Biomaterials 22:1233–1240. https://doi.org/10.1016/S0142-9612(00)00273-8 CrossRef

Guilemany JM, Cinca N, Dosta S, Garcia I. (2014) Feasibility of cold gas spraying to produce high roughness high porous titanium coatings for metallic prosthesis. Thermal Spray Centre (CPT). Intellectual properties protection (iPP). Ref.1499 p 21

Guilemany JM, Dosta S, Cinca N, Fernández J, Garcia I. (2012) Feasibility of cold gas spraying to produce metal coatings onto activated polymeric substrates. Thermal Spray Centre (CPT). Intellectual properties protection (iPP). Ref.1240B p 10

Hahn B-D, Park D-S, Choi J-J et al (2009) Dense nanostructured hydroxyapatite coating on titanium by aerosol deposition. J Am Ceram Soc 92:683–687. https://doi.org/10.1111/j.1551-2916.2008.02876.x CrossRef

Hailer NP, Lazarinis S, Mäkelä KT et al (2015) Hydroxyapatite coating does not improve uncemented stem survival after total hip arthroplasty!: an analysis of 116,069 THAs in the Nordic Arthroplasty Register Association (NARA) database. Acta Orthop 86:18–25. https://doi.org/10.3109/17453674.2014.957088 CrossRef

Hamweendo A., Popoola P. A. I., Botef I. (2014) Mathematical model for predicting process parameters in cold spray of porous Ti coatings. doi: 10.13140/2.1.2846.1123

Hasniyati M, Zuhailawati H, Sivakumar R et al (2015) Cold spray deposition of hydroxyapatite powder onto magnesium substrates for biomaterial applications. Surf Eng 31:867–874. https://doi.org/10.1179/1743294415Y.0000000068 CrossRef

Hasniyati MR, Zuhailawati H, Ramakrishnan S (2016) A statistical prediction of multiple responses using overlaid contour plot on hydroxyapatite coated magnesium via cold spray deposition. Procedia Chem 19:181–188. https://doi.org/10.1016/j.proche.2016.03.091 CrossRef

Heimann RB (2016) The challenge and promise of low-temperature bioceramic coatings: an editorial. Surf Coat Technol 301:1–5. https://doi.org/10.1016/j.surfcoat.2015.12.082 CrossRef

http://www.stryker.com/en-us/products/Orthopaedics/HipReplacement/Acetabular/TritaniumAcetabularShell/index.htm

http://www.zimmerbiomet.com/medical-professionals/common/our-science/trabecular-metal-technology.html

Ishikawa K, Miyamoto Y, Nagayama M, Asaoka K (1997) Blast coating method: new method of coating titanium surface with hydroxyapatite at room temperature. J Biomed Mater Res 38:129–134CrossRef

Kang K, Bae G, Won J, Lee C (2012) Mechanical property enhancement of kinetic sprayed Al coatings reinforced by multi-walled carbon nanotubes. Acta Mater 60:5031–5039. https://doi.org/10.1016/j.actamat.2012.05.034 CrossRef

Ketola J (2014) Cold sprayed coatings in biomedicine, Master’s thesis, Tampere University of Technology

Kliemann J-O, Gutzmann H, Gärtner F et al (2011) Formation of cold-sprayed ceramic titanium dioxide layers on metal surfaces. J Therm Spray Technol 20:292–298. https://doi.org/10.1007/s11666-010-9563-3 CrossRef

Koivuluoto H (2010) Microstructural characteristics and corrosion properties of cold-sprayed coatings. Dissertation, Tampere University of Technology

Laonapakul T, Otsuka Y, Nimkerdphol AR, Mutoh Y (2012a) Acoustic emission and fatigue damage induced in plasma-sprayed hydroxyapatite coating layers. J Mech Behav Biomed Mater 8:123–133. https://doi.org/10.1016/j.jmbbm.2011.11.011 CrossRef

Laonapakul T, Rakngarm Nimkerdphol A, Otsuka Y, Mutoh Y (2012b) Failure behavior of plasma-sprayed HAp coating on commercially pure titanium substrate in simulated body fluid (SBF) under bending load. J Mech Behav Biomed Mater 15:153–166. https://doi.org/10.1016/j.jmbbm.2012.05.017 CrossRef

Lee JH, Jang HL, Lee KM, Baek H-R, Jin K, Hong KS et al (2013) In vitro and in vivo evaluation of the bioactivity of hydroxyapatite- coated polyetheretherketone biocomposites created by cold spray technology. Acta Biomater 9:6177–6187CrossRef

Li C-J, Li W-Y (2003) Deposition characteristics of titanium coating in cold spraying. Surf Coat Technol 167:278–283. https://doi.org/10.1016/S0257-8972(02)00919-2 CrossRef

Li W-Y, Zhang C, Guo X et al (2007) Ti and Ti-6Al-4V coatings by cold spraying and microstructure modification by heat treatment. Adv Eng Mater 9:418–423. https://doi.org/10.1002/adem.200700022j CrossRef

Liu X, Chu PK, Ding C (2010) Surface nano-functionalization of biomaterials. Mater Sci Eng R Rep 70:275–302. https://doi.org/10.1016/j.mser.2010.06.013 CrossRef

Liu Y, Dang Z, Wang Y et al (2014a) Hydroxyapatite/graphene-nanosheet composite coatings deposited by vacuum cold spraying for biomedical applications: inherited nanostructures and enhanced properties. Carbon 67:250–259. https://doi.org/10.1016/j.carbon.2013.09.088 CrossRef

Liu Y, Huang J, Li H (2014b) Nanostructural characteristics of vacuum cold-sprayed hydroxyapatite/graphene-nanosheet coatings for biomedical applications. J Therm Spray Technol 23:1149–1156. https://doi.org/10.1007/s11666-014-0069-2 CrossRef

Lozier A, Poopola OO, Mason JJ, Forstein M (2009) Bone fracture fixation system, US Papent no US 2009/0198286 A1

Melero H, Fernández J, Dosta S, Guilemany JM (2011) Characterization of novel bioactive hydroxyapatite-TiO2 coatings obtained by high velocity oxy-fuel. In: Proceedings of the thermal spray conference, Hamburg, Germany

Moore B, Asadi E, Lewis G (2017) Deposition methods for microstructured and nanostructured coatings on metallic bone implants: a review. Adv Mater Sci Eng 2017:1–9. https://doi.org/10.1155/2017/5812907 CrossRef

Mukhopadhyay A, Joshi K, Dey A, Chakraborty R, Rav A, Biswas S et al (2010) Shock deformation of coarse grain alumina above Hugoniot elastic limit. J Mater Sci 45:3635–3651. https://doi.org/10.1007/s10853-010-4409-4 CrossRef

Noh JH, Kim DW, An JS, Chang HR, Kim DH, Hong KS, Chin DK (2012) Method for modifying the surface area of a bioinert material. US Patent 0009341 A1, 12 Jan 2012

Noorakma ACW, Zuhailawati H, Aishvarya V, Dhindaw BK (2013) Hydroxyapatite-coated magnesium-based biodegradable alloy: cold spray deposition and simulated body fluid studies. J Mater Eng Perform 22:2997–3004. https://doi.org/10.1007/s11665-013-0589-9 CrossRef

O’Hare P, Meenan BJ, Burke GA et al (2010) Biological responses to hydroxyapatite surfaces deposited via a co-incident microblasting technique. Biomaterials 31:515–522. https://doi.org/10.1016/j.biomaterials.2009.09.067 CrossRef

O’Neill L, O’Sullivan C, O’Hare P et al (2009) Deposition of substituted apatites onto titanium surfaces using a novel blasting process. Surf Coat Technol 204:484–488. https://doi.org/10.1016/j.surfcoat.2009.08.014 CrossRef

O’Sullivan C, O’Hare P, O’Leary ND et al (2010) Deposition of substituted apatites with anticolonizing properties onto titanium surfaces using a novel blasting process. J Biomed Mater Res B Appl Biomater 95B:141–149. https://doi.org/10.1002/jbm.b.31694 CrossRef

Park D-S, Kim I-S, Kim H, et al (2010) Improved biocompatibility of hydroxyapatite thin film prepared by aerosol deposition. J Biomed Mater Res B Appl Biomater n/a-n/a doi: https://doi.org/10.1002/jbm.b.31658

Price TS, Shipway PH, McCartney DG (2006) Effect of cold spray deposition of a titanium coating on fatigue behavior of a titanium alloy. J Therm Spray Technol 15:507–512. https://doi.org/10.1361/105996306X147108 CrossRef

Qiu D, Zhang M, Grøndahl L (2013) A novel composite porous coating approach for bioactive titanium-based orthopedic implants. J Biomed Mater Res 101A:862–872. https://doi.org/10.1002/jbm.a.34372 CrossRef

Ratner BD, Hoffman AS, Schoen FJ, Lemons JE (2013) Introduction – biomaterials science: an evolving, multidisciplinary endeavor. In: Ratner BD, Hoffman AS, Schoen FJ, Lemons JE (eds) Biomaterials science, 3rd edn. Academic Press, San Diego

Salim NT, Yamada M, Nakano H, Fukumoto M (2011) The synthesis of titanium dioxide (TiO2) powder for cold spray process. IOP Conf Series Mater Sci Eng 18:32019. https://doi.org/10.1088/1757-899X/18/3/032019 CrossRef

Sanpo N, Ang SM, Cheang P, Khor KA (2009a) Antibacterial property of cold sprayed chitosan-Cu/Al coating. J Therm Spray Technol 18:600–608. https://doi.org/10.1007/s11666-009-9391-5 CrossRef

Sanpo N, Hailan C, Loke K, Keng KP, Cheang P, Berndt CC, et al. (2010) Biocompatibility and antibacterial property of cold sprayed ZnO/titanium composite coating. In: Mendez-Vilas A (ed). Science and technology against microbial pathogens. Research, development and evaluation. In: proceedings of the international conference on antimicrobial research, World Scientific pp 140–44

Sanpo N, Saraswati, Lu TM, Cheang P (2008) Anti-bacterial property of cold sprayed ZnO-Al coating. In: Proceedings of the 2008 international conference on biomedical engineering and informatics, Sanya, Hainan, China

Sanpo N, Tan M, Cheang P, Khor KA (2009b) Antibacterial property of cold-sprayed HA-Ag/PEEK coating. J Therm Spray Technol 18:10–15CrossRef

Saphronov V, Shishkovsky I (2015) Laser annealing for gas-dynamical spraying of HA coating upon a titanium surface. Crystals 5:447–457. https://doi.org/10.3390/cryst5040447 CrossRef

Shtansky DV, Batenina IV, Yadroitsev IA et al (2012) A new combined approach to metal-ceramic implants with controllable surface topography, chemistry, blind porosity, and wettability. Surf Coat Technol 208:14–23. https://doi.org/10.1016/j.surfcoat.2012.07.008 CrossRef

Shukla V, Elliott G, Kear B, McCandlish L (2001) Hyperkinetic deposition of nanopowders by supersonic rectangular jet impingement. Script Mater 44:2179–2182CrossRef

Singh RP (2011) Numerical evaluation, optimization and mathematical validation of cold spraying of hydroxyapatite using taguchi approach. Int J Eng Sci Technol 3:7006–7015

Singh RP, Batra U (2013) Effect of cold spraying parameters and their interaction an hydroxyapatite deposition. J Appl Fluid Mech 6(4):555–561

Sun J, Han Y, Cui K (2008) Innovative fabrication of porous titanium coating on titanium by cold spraying and vacuum sintering. Mater Lett 62:3623–3625. https://doi.org/10.1016/j.matlet.2008.04.011 CrossRef

Sun L, Berndt CC, Gross KA, Kucuk A (2001) Material fundamentals and clinical performance of plasma-sprayed hydroxyapatite coatings: a review. J Biomed Mater Res 58:570–592CrossRef

Taha M, Chai F, Blanchemain N et al (2013) Validating the poly-cyclodextrins based local drug delivery system on plasma-sprayed hydroxyapatite coated orthopedic implant with toluidine blue O. Mater Sci Eng C 33:2639–2647. https://doi.org/10.1016/j.msec.2013.02.022 CrossRef

Tamai K, Kawate K, Kawahara I, Takakura Y, Sakaki K (2009) Inorganic antimicrobial coating for titanium alloy and its effect on bacteria. J Orthop Sci 14:204–209CrossRef

Trentin A, Vezzu S, Rech S, Gulizia S and Jahedi M (2011) Biocompatibility of titanium coatings deposites on CoCr by cold spray. In: Proceedings of the international thermal spray conference, Hamburg, Germany

Van Steenkiste T, Gorkiewicz DW (2004) Analysis of tantalum coatings produced by the kinetic spray process. J Therm Spray Technol 13:265–273. https://doi.org/10.1361/10599630419418 CrossRef

Vilardell AM, Cinca N, Cano IG, et al (2016) Dense nanostructured calcium phosphate coating on titanium by cold spray. J Eur Ceram Soc doi: https://doi.org/10.1016/j.jeurceramsoc.2016.11.040

Vo P, Irissou E, Legoux J-G, Yue S (2013) Mechanical and microstructural characterization of cold-sprayed Ti-6Al-4V after heat treatment. J Therm Spray Technol 22:954–964. https://doi.org/10.1007/s11666-013-9945-4 CrossRef

Vucko MJ, King PC, Poole AJ et al (2012) Cold spray metal embedment: an innovative antifouling technology. Biofouling 28:239–248. https://doi.org/10.1080/08927014.2012.670849 CrossRef

Wang J, DiPietro J, Bostrom M et al (2014) Clinical and radiographic outcomes with a hydroxyapatite and porous coated cup design. Adv Orthop Surg 2014:1–5. https://doi.org/10.1155/2014/302969 CrossRef

Wong W., Rezaeian A., Yue S., Wong W., Rezaeian A., Yue S. (2009) Effects of gas temperature, gas pressure, and particle characteristics on cold sprayed pure titanium coatings, International Thermal Spray Conference (ITSC) 2009 American Society for Metals doi: https://doi.org/10.1361/cp2009itsc0231

Zhang L, Zhang WT (2011) Numerical investigation on particle velocity in cold spraying of hydroxyapatite coating. Adv Mater Res 18:717–722

Zhang S (2011) Biological and Biomedical coatings handbook, vol 2. Taylor & Francis, Boca Raton

Zhao L, Chu PK, Zhang Y, Wu Z (2009) Antibacterial coatings on titanium implants. J Biomedl Mater Res Part B 91B:470–480CrossRef

Zhou X (2012) Hydroxyapatite/titanium composite coating for biomedical applications. Dissertation, University of Michigan

Zhou X, Mohanty P (2012) Electrochemical behavior of cold sprayed hydroxyapatite/titanium composite in hanks’ solution. Electrochim Acta 65:134–140CrossRef

Title: Cold Spray Coatings for Biomedical Applications
Authors: Sergi Dosta
Nuria Cinca
Anna M. Vilardell
Irene G. Cano
José Maria Guilemany
Publisher: Springer International Publishing
Book: Cold-Spray Coatings
Print ISBN: 978-3-319-67182-6

Electronic ISBN: 978-3-319-67183-3

Copyright Year: 2018
DOI: https://doi.org/10.1007/978-3-319-67183-3_19

Springer Professional

Abstract

Please log in to get access to your license.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Premium Partners