Top

Published in:

2021 | OriginalPaper | Chapter

6. Cold Sprayed Metal Matrix Composites

Authors : Shuo Yin, Rocco Lupoi

Published in: Cold Spray Additive Manufacturing

Publisher: Springer International Publishing

Activate our intelligent search to find suitable subject content or patents.

search-config

AI-assisted search

Off

Abstract

Metal matrix composites (MMCs) are composite materials for which reinforcing particles and/or flakes (e.g., ceramic, diamond, 2D materials) are incorporated into metal or alloy matrix so that the new material can take the advantages of both and to gain new properties. CSAM has demonstrated superiority over conventional fusion-based AM technologies for fabricating MMCs due to its short production time, unlimited product size, high flexibility and suitability for damaged component repair [1, 2]. Over the years, extensive studies have been conducted to investigate the deposition mechanisms, microstructures and properties of cold sprayed MMC deposits. To date, various starting powders have been applied as the feedstocks for the cold spray deposition of MMCs. Typically, the MMC deposits fabricated using different feedstocks are governed by different deposition mechanisms and exhibit different microstructures. This chapter focuses on the MMC deposits made via CSAM, from feedstock preparation, deposition mechanism, microstructure to mechanical properties.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

inform now

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

inform now

previous chapter Strengthening Strategies for Cold Sprayed Deposits

next chapter Cold Sprayed Nanostructured Metallic Deposits

Yin, S., Cavaliere, P., Aldwell, B., Jenkins, R., Liao, H., Li, W., Lupoi, R.: Cold spray additive manufacturing and repair: fundamentals and applications. Addit. Manuf. 21, 628–650 (2018). https://doi.org/10.1016/j.addma.2018.04.017CrossRef

Li, W., Cao, C., Yin, S.: Solid-state cold spraying of Ti and its alloys: a literature review. Prog. Mater. Sci. 110, 100633 (2020). https://doi.org/10.1016/j.pmatsci.2019.100633CrossRef

Wang, Q., Spencer, K., Birbilis, N., Zhang, M.X.: The influence of ceramic particles on bond strength of cold spray composite coatings on AZ91 alloy substrate. Surf. Coat. Technol. 205, 50–56 (2010). https://doi.org/10.1016/j.surfcoat.2010.06.008CrossRef

Yu, M., Suo, X.K., Li, W.Y., Wang, Y.Y., Liao, H.L.: Microstructure, mechanical property and wear performance of cold sprayed Al5056/SiCp composite coatings: effect of reinforcement content. Appl. Surf. Sci. 289, 188–196 (2014). https://doi.org/10.1016/j.apsusc.2013.10.132CrossRef

Irissou, E., Legoux, J.G., Arsenault, B., Moreau, C.: Investigation of Al-Al₂O₃ cold spray coating formation and properties. J. Therm. Spray Technol. 16, 661–668 (2007). https://doi.org/10.1007/s11666-007-9086-8CrossRef

Tariq, N.H., Gyansah, L., Qiu, X., Du, H., Wang, J.Q., Feng, B., Yan, D.S., Xiong, T.Y.: Thermo-mechanical post-treatment: a strategic approach to improve microstructure and mechanical properties of cold spray additively manufactured composites. Mater. Des. 156, 287–299 (2018). https://doi.org/10.1016/j.matdes.2018.06.062CrossRef

Sansoucy, E., Marcoux, P., Ajdelsztajn, L., Jodoin, B.: Properties of SiC-reinforced aluminum alloy coatings produced by the cold gas dynamic spraying process. Surf. Coat. Technol. 202, 3988–3996 (2008). https://doi.org/10.1016/j.surfcoat.2008.02.017CrossRef

Peat, T., Galloway, A., Toumpis, A., McNutt, P., Iqbal, N.: The erosion performance of particle reinforced metal matrix composite coatings produced by co-deposition cold gas dynamic spraying. Appl. Surf. Sci. 396, 1623–1634 (2016). https://doi.org/10.1016/j.apsusc.2016.10.155CrossRef

Yin, S., Yan, X., Chen, C., Jenkins, R., Liu, M., Lupoi, R.: Hybrid additive manufacturing of Al-Ti6Al4V functionally graded materials with selective laser melting and cold spraying. J. Mater. Process. Technol. 255, 650–655 (2018). https://doi.org/10.1016/j.jmatprotec.2018.01.015CrossRef

10.

Lupoi, R., Lupton, T., Jenkins, R., Robinson, A.J., O’Donnell, G.E.: Direct manufacturing of diamond composite coatings onto silicon wafers and heat transfer performance. CIRP Ann. 67, 185–188 (2018). https://doi.org/10.1016/j.cirp.2018.04.092CrossRef

11.

Peat, T., Galloway, A., Toumpis, A., Steel, R., Zhu, W., Iqbal, N.: Enhanced erosion performance of cold spray co-deposited AISI316 MMCs modified by friction stir processing. Mater. Des. 120, 22–35 (2017). https://doi.org/10.1016/j.matdes.2017.01.099CrossRef

12.

Luo, X.T., Yang, G.J., Li, C.J.: Multiple strengthening mechanisms of cold-sprayed cBNp/NiCrAl composite coating. Surf. Coat. Technol. 205, 4808–4813 (2011). https://doi.org/10.1016/j.surfcoat.2011.04.065CrossRef

13.

Woo, D.J., Heer, F.C., Brewer, L.N., Hooper, J.P., Osswald, S.: Synthesis of nanodiamond-reinforced aluminum metal matrix composites using cold-spray deposition. Carbon N. Y. 86, 15–25 (2015). https://doi.org/10.1016/j.carbon.2015.01.010CrossRef

14.

Ito, K., Ichikawa, Y.: Microstructure control of cold-sprayed pure iron coatings formed using mechanically milled powder. Surf. Coat. Technol. 357, 129–139 (2018). https://doi.org/10.1016/j.surfcoat.2018.10.016CrossRef

15.

Pialago, E.J.T., Kwon, O.K., Kim, M.S., Park, C.W.: Ternary Cu-CNT-AlN composite coatings consolidated by cold spray deposition of mechanically alloyed powders. J. Alloys Compd. 650, 199–209 (2015). https://doi.org/10.1016/j.jallcom.2015.08.007CrossRef

16.

Feng, C., Guipont, V., Jeandin, M., Amsellem, O., Pauchet, F., Saenger, R., Bucher, S., Iacob, C.: B4C/Ni Composite coatings prepared by cold spray of blended or CVD-coated powders. J. Therm. Spray Technol. 21, 561–570 (2012). https://doi.org/10.1007/s11666-012-9774-xCrossRef

17.

Chen, C., Xie, X., Xie, Y., Planche, M.P., Deng, S., Ji, G., Aubry, E., Ren, Z., Liao, H.: Cold spraying of thermally softened Ni-coated FeSiAl composite powder: Microstructure characterization, tribological performance and magnetic property. Mater. Des. 160, 270–283 (2018). https://doi.org/10.1016/j.matdes.2018.09.025CrossRef

18.

Huang, C., Li, W., Xie, Y., Planche, M.P., Liao, H., Montavon, G.: Effect of substrate type on deposition behavior and wear performance of Ni-coated graphite/Al composite coatings deposited by cold spraying. J. Mater. Sci. Technol. 33, 338–346 (2017). https://doi.org/10.1016/j.jmst.2016.11.016CrossRef

19.

Yin, S., Xie, Y., Cizek, J., Ekoi, E.J., Hussain, T., Dowling, D.P., Lupoi, R.: Advanced diamond-reinforced metal matrix composites via cold spray: properties and deposition mechanism. Compos. Part B Eng. 113, 44–54 (2017). https://doi.org/10.1016/j.compositesb.2017.01.009CrossRef

20.

Na, H., Bae, G., Shin, S., Kumar, S., Kim, H., Lee, C.: Advanced deposition characteristics of kinetic sprayed bronze/diamond composite by tailoring feedstock properties. Compos. Sci. Technol. 69, 463–468 (2009). https://doi.org/10.1016/j.compscitech.2008.11.015CrossRef

21.

Johnson, T.G.: Metal coated particles and defense applications. In: Metal Coated Particles and Defense Applications. Cold Spray Action Team, Worcester (2012)

22.

Yin, S., Cizek, J., Chen, C., Jenkins, R., O’Donnell, G., Lupoi, R.: Metallurgical bonding between metal matrix and core-shelled reinforcements in cold sprayed composite coating. Scr. Mater. 177, 49–53 (2020). https://doi.org/10.1016/j.scriptamat.2019.09.023CrossRef

23.

Yin, S., Ekoi, E.J., Lupton, T.L., Dowling, D.P., Lupoi, R.: Cold spraying of WC-Co-Ni coatings using porous WC-17Co powders: formation mechanism, microstructure characterization and tribological performance. Mater. Des. 126, 305–313 (2017). https://doi.org/10.1016/j.matdes.2017.04.040CrossRef

24.

Couto, M., Dosta, S., Guilemany, J.M.: Comparison of the mechanical and electrochemical properties of WC-17 and 12Co coatings onto Al7075-T6 obtained by high velocity oxy-fuel and cold gas spraying. Surf. Coat. Technol., pp. 180–189 (in press, 2014). https://doi.org/10.1016/j.surfcoat.2014.04.034

25.

Li, W., Assadi, H., Gaertner, F., Yin, S.: A review of advanced composite and nanostructured coatings by solid-state cold spraying process. Crit. Rev. Solid State Mater. Sci. 44, 109–156 (2019). https://doi.org/10.1080/10408436.2017.1410778CrossRef

26.

Sova, A., Kosarev, V.F., Papyrin, A., Smurov, I.: Effect of ceramic particle velocity on cold spray deposition of metal-ceramic coatings. J. Therm. Spray Technol. 20, 285–291 (2011). https://doi.org/10.1007/s11666-010-9571-3CrossRef

27.

Grigoriev, S., Okunkova, A., Sova, A., Bertrand, P., Smurov, I.: Cold spraying: from process fundamentals towards advanced applications. Surf. Coat. Technol. 268, 77–84 (2015). https://doi.org/10.1016/j.surfcoat.2014.09.060CrossRef

28.

Shkodkin, A., Kashirin, A., Klyuev, O., Buzdygar, T.: Metal particle deposition stimulation by surface abrasive treatment in gas dynamic spraying. J. Therm. Spray Technol. 15, 382–386 (2006). https://doi.org/10.1361/105996306X124383CrossRef

29.

Yu, M., Li, W.Y., Suo, X.K., Liao, H.L.: Effects of gas temperature and ceramic particle content on microstructure and microhardness of cold sprayed SiCp/Al 5056 composite coatings. Surf. Coat. Technol. 220, 102–106 (2013). https://doi.org/10.1016/j.surfcoat.2012.05.050CrossRef

30.

Yin, S., Hassani, M., Xie, Q., Lupoi, R.: Unravelling the deposition mechanism of brittle particles in metal matrix composites fabricated via cold spray additive manufacturing. Scr. Mater. 194, 5 (2021). https://doi.org/10.1016/j.scriptamat.2020.10.055CrossRef

31.

Spencer, K., Fabijanic, D.M., Zhang, M.X.: The use of Al-Al₂O₃ cold spray coatings to improve the surface properties of magnesium alloys. Surf. Coat. Technol. 204, 336–344 (2009). https://doi.org/10.1016/j.surfcoat.2009.07.032CrossRef

32.

Wu, J., Fang, H., Yoon, S., Kim, H., Lee, C.: The rebound phenomenon in kinetic spraying deposition. Scr. Mater. 54, 665–669 (2006). https://doi.org/10.1016/j.scriptamat.2005.10.028CrossRef

33.

Assadi, H., Kreye, H., Gärtner, F., Klassen, T.: Cold spraying—a materials perspective. Acta Mater. 116, 382–407 (2016). https://doi.org/10.1016/j.actamat.2016.06.034

34.

Ichikawa, Y., Tokoro, R., Tanno, M., Ogawa, K.: Elucidation of cold-spray deposition mechanism by auger electron spectroscopic evaluation of bonding interface oxide fi lm. Acta Mater. 164, 39–49 (2019). https://doi.org/10.1016/j.actamat.2018.09.041CrossRef

35.

Assadi, H., Gärtner, F., Stoltenhoff, T., Kreye, H.: Bonding mechanism in cold gas spraying. Acta Mater. 51, 4379–4394 (2003). https://doi.org/10.1016/S1359-6454(03)00274-XCrossRef

36.

Guetta, S., Berger, M.H., Borit, F., Guipont, V., Jeandin, M., Boustie, M., Ichikawa, Y., Sakaguchi, K., Ogawa, K.: Influence of particle velocity on adhesion of cold-sprayed splats. J. Therm. Spray Technol. 18, 331–342 (2009). https://doi.org/10.1007/s11666-009-9327-0CrossRef

37.

King, P.C., Bae, G., Zahiri, S.H., Jahedi, M., Lee, C.: An experimental and finite element study of cold spray copper impact onto two aluminum substrates. J. Therm. Spray Technol. 19, 620–634 (2010). https://doi.org/10.1007/s11666-009-9454-7CrossRef

38.

Luo, X.T., Yang, E.J., Shang, F.L., Yang, G.J., Li, C.X., Li, C.J.: Microstructure, mechanical properties, and two-body abrasive wear behavior of cold-sprayed 2 vol.% Cubic BN-NiCrAl nanocomposite coating. J. Therm. Spray Technol. 23, 1181–1190 (2014). https://doi.org/10.1007/s11666-014-0092-3

39.

Shockley, J.M., Descartes, S., Vo, P., Irissou, E., Chromik, R.R.: The influence of Al2O3 particle morphology on the coating formation and dry sliding wear behavior of cold sprayed Al–Al₂O₃ composites. Surf. Coat. Technol. 270, 324–333 (2015). https://doi.org/10.1016/j.surfcoat.2015.01.057CrossRef

40.

Meydanoglu, O., Jodoin, B., Kayali, E.S.: Microstructure, mechanical properties and corrosion performance of 7075 Al matrix ceramic particle reinforced composite coatings produced by the cold gas dynamic spraying process. Surf. Coat. Technol. 235, 108–116 (2013). https://doi.org/10.1016/j.surfcoat.2013.07.020CrossRef

41.

Tariq, N.H., Gyansah, L., Wang, J.Q., Qiu, X., Feng, B., Siddique, M.T., Xiong, T.Y.: Cold spray additive manufacturing: a viable strategy to fabricate thick B4C/Al composite coatings for neutron shielding applications. Surf. Coat. Technol. 339, 224–236 (2018). https://doi.org/10.1016/j.surfcoat.2018.02.007CrossRef

42.

Tariq, N. ul H., Gyansah, L., Qiu, X., Jia, C., Awais, H. Bin, Zheng, C., Du, H., Wang, J., Xiong, T.: Achieving strength-ductility synergy in cold spray additively manufactured Al/B 4 C composites through a hybrid post-deposition treatment. J. Mater. Sci. Technol. 35, 1053–1063 (2019). https://doi.org/10.1016/j.jmst.2018.12.022

43.

Yang, K., Li, W., Huang, C., Yang, X., Xu, Y.: Optimization of cold-sprayed AA2024/Al₂O₃ metal matrix composites via friction stir processing: effect of rotation speeds. J. Mater. Sci. Technol. 34, 2167–2177 (2018). https://doi.org/10.1016/j.jmst.2018.03.016CrossRef

44.

Chen, C., Xie, Y., Yan, X., Huang, R., Kuang, M., Ma, W., Zhao, R., Wang, J., Liu, M., Ren, Z., Liao, H.: Cold sprayed WC reinforced maraging steel 300 composites: microstructure characterization and mechanical properties. J. Alloys Compd. 785, 499–511 (2019). https://doi.org/10.1016/j.jallcom.2019.01.135CrossRef

Title: Cold Sprayed Metal Matrix Composites
Authors: Shuo Yin
Rocco Lupoi
Publisher: Springer International Publishing
Book: Cold Spray Additive Manufacturing
Print ISBN: 978-3-030-73366-7

Electronic ISBN: 978-3-030-73367-4

Copyright Year: 2021
DOI: https://doi.org/10.1007/978-3-030-73367-4_6

Springer Professional

Abstract

Please log in to get access to your license.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Premium Partners