Skip to main content
Register
Springer Professional
SEARCH
Menu 1 2 3 4
Top

Hint

Swipe to navigate through the articles of this issue

Published in: Metallurgist 1-2/2022

02-07-2022

Composition, Structure and Properties of Hard-Alloy Powders Obtained by Electrodispersion of T5K10 Alloy in Water

Authors: E. V. Ageev, A. E. Ageeva

Published in: Metallurgist | Issue 1-2/2022

Login to get access
share
SHARE

Abstract

Based on experimental studies aimed at investigating the composition, structure and properties of particles of carbide powder obtained by electroerosion dispersion of T5K10 hard alloy waste in water, high efficiency is demonstrated for use of this technology that ensures production of powders suitable for the preparing cutting tools with low energy expenditure. It is noted that hard alloy powder particles prepared by electroerosion dispersion of T5K10 hard alloy waste in water have a number of advantageous characteristics and properties.
previous article Investigation of the Effect of Various Production Lubricants on Aluminum Alloy Strip Rolling Characteristics
next article Investigation of Mechanical Properties of High-Density Iron-Based Alloys with Nanosized Additions
Literature
1.
E. N. Avdeenko, E. I. Zamulaeva, A. A. Zaitsev, I. Yu Konyashin, and E. A. Levashov, “Structure and properties of coarse grained WC–Co hard alloys with an especially uniform microstructure,” Izv. Vuz. Tsvet. Met., No. 4, 70–78 (2019).
2.
V. A. Bystrov, “Efficiency of strengthening hard alloy renewal components of metallurgical units,” Izv. Vuz. Chern. Met., 61, No. 12, 939-947 (2018).
3.
S. I. Bogodukov, E. S. Kozik, and E. V. Svidenko, “Study of the effect of heating temperature fields during continuous laser treatment on operating properties of hard alloy T15K6 plates,” Izv. Vuz. Poroshk. Metall. Funkts. Pokrytiya, No. 2, 76–84 (2018).
4.
S. I. Bogodukhov, E. S. Kozik, E. V. Svidenko, and V. D. Ignatyuk, “Heat treatment of unsharpened plates of alloy T15K6 by continuous laser radiation,” Uproch. Tekhnol. Pokrytiya, 15, No. 1(165), 26–30 (2019).
5.
M. I. Dvornik and E. A. Mikhailenko, “Use of a carbon deficit for creating nanostructured graded hard alloy,” Byul. Nauch. Soobshchenii¸ No. 23, 22–27 (2018).
6.
S. S. Samotugin, E. V. Kudinova, O. A. Khristenko, V. P. Balyakovskii, and Ya. N. Shibistaya, “Selection of optimum plasma treatment regimes for hard alloy tools,” Tekhnol. Mashin., No. 7, 30–34 (2018).
7.
R. A. Latypov, A. V. Serov, N. V. Serov, and I. Yu. Ignatkin, “Utilization of engineering and metallurgy waste during strengthening and restoration of machine components,” Metallurg, No. 5, Part 1. 81–87; No. 6, Part 2, 87–92 (2021).
8.
E. V. Ageev, “Metallurgical features of the manufacture of hard-alloy powders by electroerosive dispersion of a T15K6 alloy in butanol,” Russian Metallurgy (Metally), 50, No. 1, 1155–1157 (2016). CrossRef
9.
E. V. Ageev, “Fabrication and investigation of carbide billets from powders prepared by electroerosive dispersion of tungsten-containing wastes,” Russian J. of Non-Ferrous Metals, 55, No. 6, 577–580 (2014). CrossRef
10.
R. A. Latypov, G. R. Latypova, E. V. Ageev, A. Y. Altukhov, and E. V. Ageeva, “Elemental composition of the powder particles produced by electric discharge dispersion of the wastes of a VK8 hard alloy,” Russian Metallurgy (Metally), 2017, No. 12, 1083–1085 (2017). CrossRef
11.
E. V. Ageev, E.V. Ageeva, and R. A. Latypov, “Investigation into the properties of electroerosive powders and hard alloy fabricated from them by isostatic pressing and sintering,” Russian J. of Non-Ferrous Metals, 56, No. 1, 52–62 (2015). CrossRef
Metadata
Title
Composition, Structure and Properties of Hard-Alloy Powders Obtained by Electrodispersion of T5K10 Alloy in Water
Authors
E. V. Ageev
A. E. Ageeva
Publication date
02-07-2022
Publisher
Springer US
Published in
Metallurgist / Issue 1-2/2022
Print ISSN: 0026-0894
Electronic ISSN: 1573-8892
DOI
https://doi.org/10.1007/s11015-022-01311-4

Other articles of this Issue 1-2/2022

Metallurgist 1-2/2022 Go to the issue

OriginalPaper

Oxidation Process of High-Alloy Steel Powders During Melt Atomization with Water

OriginalPaper

Topographic Contour Element Features in Patterned Macrostructures of the 18th Century Persian Bulat Steel

OriginalPaper

Modeling of Exchange Interactions in Melts Formed During Joint Smelting of Oxidized Nickel Ores and Pyrrhotite Concentrates

OriginalPaper

Study of the Operating Conditions of Piercing Mill Shoes Using Computer Modeling

OriginalPaper

Study of Osmium Leaching Conditions from Copper Production Lead Cakes

OriginalPaper

Formation of Structure and Properties of Aluminum Alloys During Roll Casting

Premium Partners

in-adhesives MKVS Hellmich GmbH Krahn Ceramics
    Image Credits