Top

Published in:

2023 | OriginalPaper | Chapter

Conceptual Design of Extrusion Systems for Cement Paste 3D Printing

Authors : Shubham Maurya, Biranchi Panda, Uday Shanker Dixit, Arun Ch. Borsaikia, Biswajeet Barman

Published in: Low Cost Manufacturing Technologies

Publisher: Springer Nature Singapore

Activate our intelligent search to find suitable subject content or patents.

search-config

AI-assisted search

Off

Abstract

The extrudability performance of 3D printed material depends on extruder geometry, layer height and width, the process parameters including extrusion speed, and the material rheological properties. This study deals with the development of a cement paste extruder prototype for the 3D printing of cement-based materials. A performance comparative study was carried out between two different types of extrusion systems, namely augur screw-based and ram-based extruders with the help of Pugh concept analysis. The extrusion test was conducted using the developed extruder prototypes and based on experimental findings, the ram-based extruder was found to be suitable for better extrudability. Therefore, the ram-based extruder was mounted on a custom-built 3-axis gantry system to print some lattice designs.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

inform now

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

inform now

Springer Professional "Wirtschaft"

Online-Abonnement

Mit Springer Professional "Wirtschaft" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 340 Zeitschriften

aus folgenden Fachgebieten:

Bauwesen + Immobilien
Business IT + Informatik
Finance + Banking
Management + Führung
Marketing + Vertrieb
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

inform now

previous chapter Summary of Efforts in Phase Prediction of High Entropy Alloys Using Machine Learning

next chapter Friction Stir Spot Welding of Honeycomb Core Sandwich Structure

ISO/DIS 17296-1(en), Additive manufacturing—general principles—Part 1: Terminology. https://www.iso.org/obp/ui/#iso:std:iso:17296:-1:dis:ed-1:v1:en. Accessed 2 June 2022

Tofail SA, Koumoulos EP, Bandyopadhyay A, Bose S, O’Donoghue L, Charitidis C (2018) Additive manufacturing: scientific and technological challenges, market uptake and opportunities. Mater Today 21(1):22–37CrossRef

Holzmann P, Breitenecker RJ, Soomro AA, Schwarz EJ (2017) User entrepreneur business models in 3D printing. J Manuf Technol Manag

Tay YWD, Panda B, Paul SC, Noor Mohamed NA, Tan MJ, Leong KF (2017) 3D printing trends in building and construction industry: a review. Virtual Phys Prototyp 12(3):261–276

Dey D, Srinivas D, Panda B, Suraneni P, Sitharam TG (2022) Use of industrial waste materials for 3D printing of sustainable concrete: a review. J Clean Prod 130749

Guo C-F, Zhang M, Bhandari B (2019) A comparative study between syringe-based and screw-based 3D food printers by computational simulation. Comput Electron Agric 162:397–404. https://doi.org/10.1016/j.compag.2019.04.032CrossRef

El Mesbahi J, Buj-Corral I, El Mesbahi A (2020) Use of the QFD method to redesign a new extrusion system for a printing machine for ceramics. Int J Adv Manuf Technol 111(1):227–242CrossRef

Gravesen J (2008) The geometry of the Moineau pump. Comput Aided Geom Des 25(9):792–800. https://doi.org/10.1016/j.cagd.2008.06.012MathSciNetCrossRefMATH

El Mesbahi J, Buj-Corral I, El Mesbahi A (2021) Design of an innovative new extrusion system for a printing machine for ceramics. Int J Adv Manuf Technol 117(1):591–603CrossRef

10.

Pugh S (1991) Total design: integrated methods for successful product engineering. Addison-Wesley

11.

Frey DD, Herder PM, Wijnia Y, Subrahmanian E, Katsikopoulos K, Clausing DP (2007) An evaluation of the Pugh controlled convergence method. Int Des Eng Tech Conf Comput Inf Eng Conf 48043:193–203

12.

Perrot A, Rangeard D, Nerella VN, Mechtcherine V (2018) Extrusion of cement-based materials—an overview. RILEM Tech Lett 3:91–97CrossRef

13.

Budynas RG, Nisbett JK (2011) Shigley’s mechanical engineering design, vol 9. McGraw-hill, New York

14.

Nair SAO, Panda S, Santhanam M, Sant G, Neithalath N (2020) A critical examination of the influence of material characteristics and extruder geometry on 3D printing of cementitious binders. Cem Concr Compos 112:103671. https://doi.org/10.1016/j.cemconcomp.2020.103671CrossRef

15.

Amza C, Zapciu A, Popescu D (2017) Paste extruder—hardware add-on for desktop 3D printers. Technologies 5(3):50. https://doi.org/10.3390/technologies5030050CrossRef

Title: Conceptual Design of Extrusion Systems for Cement Paste 3D Printing
Authors: Shubham Maurya
Biranchi Panda
Uday Shanker Dixit
Arun Ch. Borsaikia
Biswajeet Barman
Publisher: Springer Nature Singapore
Book: Low Cost Manufacturing Technologies
Print ISBN: 978-981-19-8451-8

Electronic ISBN: 978-981-19-8452-5

Copyright Year: 2023
DOI: https://doi.org/10.1007/978-981-19-8452-5_5

Springer Professional

Abstract

Please log in to get access to your license.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Springer Professional "Wirtschaft"

Premium Partners