Top

Journal of Materials Engineering and Performance

Published in:

17-10-2016

Corrosion Behavior of MIG Brazed and MIG Welded Joints of Automotive DP600-GI Steel Sheet

Authors: Sushovan Basak, Hrishikesh Das, Tapan Kumar Pal, Mahadev Shome

Published in: Journal of Materials Engineering and Performance | Issue 12/2016

Activate our intelligent search to find suitable subject content or patents.

search-config

AI-assisted search

Off

Abstract

Galvanized dual-phase steel sheets are extensively used by the auto industry for their corrosion resistance property. Welding by the metal inert gas (MIG) process causes degradation of the steel in the vicinity of the joint due to excessive zinc evaporation. In order to minimize Zn loss, the MIG brazing process has been tried out in lap joint configuration over a heat input range of 136–204 J mm⁻¹. The amount of zinc loss, intermetallic formation and corrosion properties in the joint area has been evaluated for both MIG brazing and MIG welding. Corrosion rate of 21 mm year⁻¹ has been reduced to 2 mm year⁻¹ by adopting MIGB in place MIGW. Impedance study has shown that the corrosion mechanism in base metal, MIG brazed and MIG welded joints is dominated by charge transfer, diffusion and mixed mode control processes, respectively.

previous article Enhancing the Oxidation Performance of Wrought Ni-Base Superalloy by Minor Additions of Active Elements

next article A Study on the Synergistic Effect of ECAP and Aging Treatment on the Mechanical Properties of AA6082

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

inform now

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

inform now

M. Manna and M. Dutta, Improvement in Galvanization and Galvannealing Characteristics of DP 590 Steel by Prior Cu or Cu-Sn Flash Coating, Surf. Coat Technol., 2014, 251, p 29–37CrossRef

B. Ramezanzadeh, M.M. Attar, and M. Farzam, Corrosion Performance of a Hot-Dip Galvanized Steel Treated by Different Kinds of Conversion Coatings, Surf. Coat Technol., 2010, 205, p 874–884CrossRef

S. Basak, T.K. Pal, M. Shome, and J. Maity, GMA Brazing of Galvannealed Interstitial-Free Steel, Weld. J., 2013, 92, p 29-s–35-s

C. Chovet and S. Guiheux, Possibilities Offered by MIG and TIG Brazing of Galvanized Ultra High Strength Steels for Automotive Applications, La Metallurgia Italiana, 2006, 7–8, p 47–54

H.-Y. Ha, S.-J. Park, J.-Y. Kang, H.-D. Kim, and M.-B. Moon, Interpretation of the Corrosion Process of a Galvannealed Coating Layer on Dual-Phase Steel, Corros. Sci., 2007, 53, p 2430–2436CrossRef

L. Quintino, G. Pimenta, D. Iordachescu, R.M. Miranda, and N.V. Pepe, MIG Brazing of Galvanized Thin Sheet Joints for Automotive Industry, Mater. Manuf. Process., 2006, 21, p 63–73CrossRef

G. Banerjee, T.K. Pal, N. Bandyopadhyay, and D. Bhattacharjee, Effect of Welding Conditions on Corrosion Behaviour of Spot Welded Coated Steel Sheets, Corros. Eng. Sci. Technol., 2011, 46, p 64–69CrossRef

M.R. Bosworth, Effective Heat Input in Pulsed Current Gas Metal Arc Welding with Solid Wire Electrodes, Weld. J., 1991, 70, p 111s–117s

J.E. Gould, S.P. Khurana, and T. Li, Predictions of Microstructures When Welding Automotive Advanced High-Strength Steels, Weld. J., 2006, 8, p 111s–116s

10.

J. Mackowiak and N.R. Short, Metallurgy of Galvanized Coatings, Int. Met. Rev., 1979, 24(1), p 1–19CrossRef

11.

S.J. Rothman, N.L. Peterson, C.M. Walter, and L.J. Nowick, The Diffusion of Copper in Iron, J. Appl. Phys., 1968, 39, p 5041–5044CrossRef

12.

J. Hirvonen and J. Räisänen, Diffusion of Aluminum in Ion Implanted Alpha Iron, J. Appl. Phys., 1982, 53, p 3314–3316CrossRef

13.

R.F. Li, Z.S. Yu, and Q.I. Kai, Interfacial Structure and Joint Strengthening in Arc Brazed Galvanized Steels with Copper Based Filler, Trans Nonferr Metal Soc, 2006, 16, p 397–401CrossRef

14.

Y.U. Zhi-shui, L.I. Rui-feng, and Q.I. Kai, Growth Behavior of Interfacial Compounds in Galvanized Steel Joints with CuSi₃ Filler Under Arc Brazing, Trans. Nonferr. Metal. Soc., 2006, 16, p 1391–1396CrossRef

15.

Y.B. Zhong, Z.M. Ren, Q.X. Sun, Z.S. Jiang, K. Deng, and K.D. Xu, Behavior of Particles in Front of Metallic Solid/Liquid Interface in Electromagnetic Field, Trans. Nonferr. Metal. Soc., 2003, 13, p 755–763

16.

H. Baker, Alloy Phase Diagrams, ASM Handbook, Ohio, ASM International, 1992

17.

T.K. Rout, Electrochemical Impedance Spectroscopy Study on Multi-layered Coated Steel Sheets, Corros. Sci., 2007, 49, p 794–817CrossRef

18.

V.S. Raja, C.K. Panday, V.S. Saji, S.T. Vagge, and K. Narasimhan, An electrochemical Study on Deformed Galvanneal Steel Sheets, Surf. Coat. Technol., 2006, 201, p 2296–2302CrossRef

19.

N. Bozec, N. Blandin, and D. Thierry, Accelerated Corrosion Tests in the Automotive Industry: A Comparison of the Performance Towards Cosmetic Corrosion, Mater. Corros., 2008, 59, p 889–894CrossRef

20.

E. Almeida and M. Morcillo, Lap-Joint Corrosion of Automotive Coated Materials in Chloride Media. Part 1—Electrogalvanized Steel, Surf. Coat. Technol., 2000, 124, p 169–179CrossRef

21.

E. Almeida and M. Morcillo, Lap-Joint Corrosion of Automotive Coated Materials in Chloride Media. Part 2—Galvannealed Steel, Surf. Coat. Technol., 2000, 124, p 180–189CrossRef

22.

A.P. Yadav, A. Nishikata, and T. Tsuru, Electrochemical Impedance Study on Galvanized Steel Corrosion Under Cyclic Wet–Dry Conditions—Influence of Time of Wetness, Corros. Sci., 2004, 46, p 169–181CrossRef

23.

S.T. Vagge, V.S. Raja, and R. Ganesh Narayanan, Effect of Deformation on the Electrochemical Behavior of Hot-Dip Galvanized Steel Sheets, Appl. Surf. Sci., 2007, 253, p 8415–8421CrossRef

24.

C. Perez, A. Collazo, M. Izquierdo, P. Merino, and X.R. Novoa, Comparative Study Between Galvanised Steel and Three Duplex Systems Submitted to a Weathering Cyclic Test, Corros. Sci., 2002, 44, p 481–500CrossRef

25.

V. Barranco, Jr, and S. Feliu, EIS study of the Corrosion Behaviour of Zinc-Based Coatings on Steel in Quiescent 3% NaCl Solution. Part 1: Directly Exposed Coatings, Corros. Sci., 2004, 46, p 2203–2220CrossRef

26.

A. Amirudin and D. Thierry, Application of Electrochemical Impedance Spectroscopy to Study the Degradation of Polymer-Coated Metals, Prog. Org. Coat., 1995, 26, p 1–28CrossRef

27.

J.O’.M. Bockris, A.K.N. Reddy, Modern Electrochemistry 1970, 2, p 876.

28.

P.P. Sarkar, P. Kumar, M.K. Manna, and P.C. Chakraborti, Microstructural Influence on the Electrochemical Corrosion Behaviour of Dual-Phase Steels in 35% NaCl Solution, Mater. Lett., 2005, 59, p 2488–2491CrossRef

Title: Corrosion Behavior of MIG Brazed and MIG Welded Joints of Automotive DP600-GI Steel Sheet
Authors: Sushovan Basak
Hrishikesh Das
Tapan Kumar Pal
Mahadev Shome
Publication date: 17-10-2016
Publisher: Springer US
Published in: Journal of Materials Engineering and Performance / Issue 12/2016
Print ISSN: 1059-9495
Electronic ISSN: 1544-1024
DOI: https://doi.org/10.1007/s11665-016-2356-1

Springer Professional

Abstract

Please log in to get access to your license.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Other articles of this Issue 12/2016

Surface Microstructure of Mo(C)N Coatings Investigated by AFM

Effect of Fe on Microstructure and Properties of 8xxx Aluminum Conductor Alloys

Effect of N on Phase Transformations During Martensite Thermomechanical Processing of the Nano/Ultrafine-Grained 201L Steel

Effect of Cross-linking Density on Creep and Recovery Behavior in Epoxy-Based Shape Memory Polymers (SMEPs) for Structural Applications

Dry Sliding Wear Behavior and Subsurface Microstructure Evolution of Mg97Zn1Y2 Alloy in a Wide Sliding Speed Range

Effect of Hot Forging on Microstructural Evolution and Impact Toughness in Ultra-high Carbon Low Alloy Steel

Premium Partners