Top

Physics of Metals and Metallography

Published in:

01-06-2022 | STRENGTH AND PLASTICITY

Corrosion Behavior of Nitrided Titanium Alloy β-CEZ and 9S20K Carbon Steel

Authors: F. Z. Benlahreche, E. Nouicer, L. Yahia, A. Nouicer

Published in: Physics of Metals and Metallography | Issue 6/2022

Activate our intelligent search to find suitable subject content or patents.

search-config

AI-assisted search

Off

Abstract

This work is the study of the influence of liquid nitriding treatment on the electrochemical and mechanical behavior of two metallic materials, the titanium based alloy β-CEZ and 9S20K carbon steel. The obtained micrographs clearly showed the structural changes happened to occur during this treatment and allowed to delimit the nitrided layer. The X-ray diffraction of the treated samples permits identification of different titanium and iron nitrides formed. The Vickers microhardness tests carried out on perpendicular sections of the nitrided samples (of β-CEZ, 9S20K) showed the increase of surface hardness. Electrochemical characterisation results showed the increase in the corrosion resistance of the nitrided 9S20K steel and the decrease of the nitrided β-CEZ alloy corrosion resistance in comparison with untreated specimens. Obtained results showed that the nitriding treatment allowed improving the mechanical and electrochemical behavior of 9S20K steel, but the nitriding treatment only improved the mechanical properties of the titanium alloy and its electrochemical behavior became worse.

previous article The Effects of Impurities on the Phase Composition and the Properties of the Al–Cu–Gd Alloy

next article The Effects of Yttrium and Erbium on the Phase Composition and Aging of the Al–Zn–Mg–Cu–Zr Alloy with a High Copper Content

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

inform now

Springer Professional "Wirtschaft"

Online-Abonnement

Mit Springer Professional "Wirtschaft" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 340 Zeitschriften

aus folgenden Fachgebieten:

Bauwesen + Immobilien
Business IT + Informatik
Finance + Banking
Management + Führung
Marketing + Vertrieb
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

inform now

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

inform now

C. E. Pinedo and W. A. Monteiro, “Surface hardening by plasma nitriding on high chromium alloy steel,” J. Mater. Sci. Lett. 20, 147–150 (2001).CrossRef

A. Alsaran, M. Karakan, and A. Celik, “The investigation of mechanical properties of ion-nitrided AISI 5140 low-alloy steel,” Mater. Charact. 48, 323–327 (2002).CrossRef

S. Y. Sirin and E. Kaluc, “Structural surface characterization of ion nitrided AISI 4340 steel,” Mater. Des. 36, 741–747 (2012).CrossRef

F. Z. Benlahreche and E. Nouicer, “Improvement of surface properties of low carbon steel by nitriding treatment,” Acta Phys. Pol. A 131, 20–23 (2017).CrossRef

I. Altinsoy, K. G. Onder, EfeF. G. Celebi, and C. Bindal, “Gas nitriding behavior of 34CrAlNi₇ nitriding steel,” Acta Phys. Pol., A 125, 414–416 (2014).CrossRef

J. Kamiński, K. Małkiewicz, J. Rębiś, and T. Wierzchoń, “The Effect of glow discharge nitriding on the corrosion resistance of stainless steel orthodontic arches in artificial saliva solution,” Arch. Metall. Mater. 65, 375–384 (2020).

E. Nouicer, F. Z. Benlahreche, and A. Nouicer, “Spectroscopic characterization of titanium alloy surface in a biological medium,” Acta Phys. Pol., A 131, 28–31 (2017).CrossRef

Z. Cai, T. Shafer, I. Watanabe, M. E. Nunn, and T. Okabe, “Electrochemical characterization of cast titanium alloys,” Biomaterials 24, 213–218 (2003).CrossRef

I. Gurappa, “Characterization of different materials for corrosion resistance under simulated body fluid conditions,” Mater. Charact. 49, 73–79 (2002).CrossRef

10.

Y. Z. Huang and D. J. Blackwood, “Characterisation of titanium oxide film grown in 0.9% NaCl at different sweep rates,” Electrochim. Acta 51, 1099–1107 (2005).CrossRef

11.

C. E. B. Marino and L. H. Mascaro, “EIS characterization of a Ti-dental implant in artificial saliva media: Dissolution process of the oxide barrier,” J. Electroanal. Chem. 568, 115–120 (2004).CrossRef

12.

E. P. Utomo, S. Herbirowo, V. Puspasari, and Y. N. Thaha, “Characteristics and corrosion behavior of Ti–30Nb–5Sn alloys in histidine solution with various NaCl concentrations,” Int. J. Corros. Scale Inhib. 10, 592–601 (2021).

13.

I. Gurrappa and D. Reddy Venugopala, “Characterisation of titanium alloy, IMI-834 for corrosion resistance under different environmental conditions,” J. Alloys Compd. 390, 270–274 (2005).CrossRef

14.

M. M. Khaled, B. S. Yilbas, I. Y. Al-Qaradawi, P. G. Coleman, D. Abdulmalik, Z. S. Seddigi, A. Abulkibash, B. F. Abu-Sharkh, and M. M. Emad, “Corrosion properties of duplex treated Ti–6Al–4V alloy in chloride media using electrochemical and positron annihilation spectroscopy techniques,” Surf. Coat. Technol. 201, 932–937 (2006).CrossRef

15.

Y. Khelfaoui, M. Kerkar, A. Bali, and F. Dalard, “Electrochemical characterisation of a PVD film of titanium on AISI 316L stainless steel,” Surf. Coat. Technol. 200, 4523–4529 (2006).CrossRef

16.

C. Monticelli, A. Frignani, A. Bellosi, G. Brunoro, and G. Trabanelli, “The corrosion behavior of titanium diboride in neutral chloride solution,” Corros. Sci. 43, 979–992 (2001).CrossRef

17.

E. Almeida, M. R. Costa, N. De Cristofaro, N. Mora, R. Catalá, J. M. Puente, and J. M. Bastidas, “Titanium passivated lacquered tinplate cans in contact with foods,” Corros. Eng., Sci. Technol. 40, 158–164 (2005).CrossRef

18.

C. Franz, G. Besserdich, V. Schulze, H. Mueller, and D. Loehe, “Influence of transformation plasticity on residual stresses and distortions due to the heat treatment of steels with different carbon contents,” J. Phys. IV 120, 481–488 (2004).

19.

M. Slovacek, “Application of numerical simulation of heat treatment in industry,” J. Phys. IV 120, 753–760 (2004).

20.

S. Srikanth, P. Saravanan, A. Joseph, and K. Ravi, “Surface modification of commercial low-carbon steel using glow discharge nitrogen plasma and its characterization,” J. Mater. Eng. Perform. 22, 2610–2622 (2013).CrossRef

21.

S. P. Brühl, A. Cabo, W. Tuckart, and G. Prieto, “Tribological behavior of nitrided and nitrocarburized carbon steel used to produce engine parts,” Ind. Lubr. Tribol. 68, 125–133 (2016).CrossRef

22.

M. Vaghani, S. A. Vasanwala, and A. K. Desai, “Stainless steel as a structural material: state of review,” Int. J. Engineering Research and Applications. 4, 657–662 (2014).

23.

N. Karthiga, J. M. Praveena, A. Deepika, A. J. A. Fathima, R. Bhuvaneshwari, G. D. Christina, V. D. Mary, DeviN. Renuga, T. Umasankareswari, and S. Rajendran, “Influence of Roseday-5 tablet on corrosion resistance of SS 316L in artificial saliva,” Int. J. Corros. Scale Inhib. 9, 595–606 (2020).

24.

A. Alamiery, E. Mahmoudi, and T. Allami, “Corrosion inhibition of low-carbon steel in hydrochloric acid environment using a Schiff base derived from pyrrole: gravimetric and computational studies,” Int. J. Corros. Scale Inhib. 10, 749–765 (2021).

25.

T. Bell, Y. Sun, and A. Suhadi, “Environmental and technical aspects of plasma nitrocarburising,” Vacuum 59, 14–23 (2000).CrossRef

26.

L. H. Chiu, C. H. Wu, and H. Chang, “Wear behavior of nitrocarburized JIS SKD61 tool steel,” Wear 253, 778–786 (2002).CrossRef

27.

F. T. Hoffmann and P. Mayr, ASM Handbook: Friction, Lubrication, and Wear Technology (ASM International, Metal Park, 1992), vol. 18, p. 1783.

28.

B. Podgornik and S. Hogmark, “Surface modification to improve friction and galling properties of forming tools,” J. Mater. Process. Technol. 174, 334–341 (2006).CrossRef

29.

H. Aydin, A. Bayram, and S. Topçu, “Effect of different nitriding processes on the friction coefficient of 304 austenitic and 420 martensitic stainless steels,” Ind. Lubr. Tribol. 65, 27–36 (2013).CrossRef

Title: Corrosion Behavior of Nitrided Titanium Alloy β-CEZ and 9S20K Carbon Steel
Authors: F. Z. Benlahreche
E. Nouicer
L. Yahia
A. Nouicer
Publication date: 01-06-2022
Publisher: Pleiades Publishing
Published in: Physics of Metals and Metallography / Issue 6/2022
Print ISSN: 0031-918X
Electronic ISSN: 1555-6190
DOI: https://doi.org/10.1134/S0031918X22060059

Springer Professional

Abstract

Please log in to get access to your license.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Wirtschaft"

Springer Professional "Technik"

Other articles of this Issue 6/2022

The Effects Produced by the Rate of Heating on the Aging Temperature on the Structure and Hardening of the Ti–10V–2Fe–3Al Titanium Alloy with Different Carbon Contents

A Neutron Diffraction Study of the Effect Produced by the Direction of Crystal Growth on the Distribution of Residual Stresses in Austenite Steel Prisms Manufactured by Selective Laser Melting

Simulation of the Crystallization Process in Low-Carbon Low-Alloy Steels

Structure Formation Patterns and Crystallographic Texture in Welded Joints of Medium-Carbon Alloy Steels in the Process of Rotary Friction Welding

On the Stabilization of the Icosahedral Structure of Small Silver Nanoclusters under Thermal Action

The Effects of Impurities on the Phase Composition and the Properties of the Al–Cu–Gd Alloy