Skip to main content
Top
Published in: Experimental Mechanics 3/2018

11-12-2017

Crack Analysis in Mudbricks under Compression Using Specific Development of Stereo-Digital Image Correlation

Authors: V. Valle, L. Laou, I. Léandry, S. Yotte, S. Rossignol, S. Hedan

Published in: Experimental Mechanics | Issue 3/2018

Log in

Activate our intelligent search to find suitable subject content or patents.

search-config
loading …

Abstract

This study reports on the stereo digital image correlation (SDIC) method and its extension in the case of fracture analysis. The aim of this work is to propose an improvement to the SDIC method for solving uncertainty problems in the vicinity of a discontinuous displacement field (cracks). It was developed using the classical minimization process, and the kinematical displacement field was enriched by a Heaviside function (H-SDIC). After a short presentation of the entire process used, some experimental tests were performed to demonstrate the performances of this new algorithm. Finally, an application of fracture detection and displacement field measurement on mudbricks is shown, thus validating the efficiency and the robustness of the proposed method.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

  • über 102.000 Bücher
  • über 537 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Finance + Banking
  • Management + Führung
  • Marketing + Vertrieb
  • Maschinenbau + Werkstoffe
  • Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

  • über 67.000 Bücher
  • über 390 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Maschinenbau + Werkstoffe




 

Jetzt Wissensvorsprung sichern!

Literature
1.
go back to reference Gonzalez J, Knauss WG (1998) Strain inhomogeneity and discontinuous crack growth in a particulate composite. J Mech Phys Solids 4610:1981–1995CrossRefMATH Gonzalez J, Knauss WG (1998) Strain inhomogeneity and discontinuous crack growth in a particulate composite. J Mech Phys Solids 4610:1981–1995CrossRefMATH
2.
go back to reference Chao YJ, Luo PF, Kalthoff J (1998) An experimental study of the deformation fields around a propagating crack tip. Exp Mech 382:79–85CrossRef Chao YJ, Luo PF, Kalthoff J (1998) An experimental study of the deformation fields around a propagating crack tip. Exp Mech 382:79–85CrossRef
3.
go back to reference Helm J (2008) Digital image correlation for specimens with multiple growing cracks. Exp Mech 48:753–762CrossRef Helm J (2008) Digital image correlation for specimens with multiple growing cracks. Exp Mech 48:753–762CrossRef
4.
go back to reference McNeill SR, Peters WH, Sutton MA (1987) Estimation of stress intensity factor by digital image correlation. Eng Fract Mech 28(1):101–112CrossRef McNeill SR, Peters WH, Sutton MA (1987) Estimation of stress intensity factor by digital image correlation. Eng Fract Mech 28(1):101–112CrossRef
5.
go back to reference Sutton MA, Helm JD, Boone ML (2001) Experimental study of crack growth in thin sheet 2024-T3 aluminum under tension-torsion loading. Int J Fract 109:285–301CrossRef Sutton MA, Helm JD, Boone ML (2001) Experimental study of crack growth in thin sheet 2024-T3 aluminum under tension-torsion loading. Int J Fract 109:285–301CrossRef
6.
go back to reference Wei Z, Deng X, Sutton MA, Yan J, Cheng CS, Zavattieri P (2011) Modeling of mixed-mode crack growth in ductile thin sheets under combined in-plane and out-of-plane loading. Eng Fract Mech 78(17):3082–3101CrossRef Wei Z, Deng X, Sutton MA, Yan J, Cheng CS, Zavattieri P (2011) Modeling of mixed-mode crack growth in ductile thin sheets under combined in-plane and out-of-plane loading. Eng Fract Mech 78(17):3082–3101CrossRef
7.
go back to reference Fagerholt E, Børvik T, Hopperstad OS (2013) Measuring discontinuous displacement fields in cracked specimens using digital image correlation with mesh adaptation and crack-path optimization. Opt Lasers Eng 51(3):299–310CrossRef Fagerholt E, Børvik T, Hopperstad OS (2013) Measuring discontinuous displacement fields in cracked specimens using digital image correlation with mesh adaptation and crack-path optimization. Opt Lasers Eng 51(3):299–310CrossRef
8.
go back to reference Cárdenas-Garcia JF, Yao HG, Zheng S (1995) 3D reconstruction of objects using stereo imaging. Opt Lasers Eng 22(3):193–213CrossRef Cárdenas-Garcia JF, Yao HG, Zheng S (1995) 3D reconstruction of objects using stereo imaging. Opt Lasers Eng 22(3):193–213CrossRef
9.
go back to reference Harvent J, Coudrin B, Brèthes L, Orteu JJ, Devy M (2015) Shape measurement using a new multi-step stereo-DIC algorithm that preserves sharp edges. Exp Mech 55(1):167–176CrossRef Harvent J, Coudrin B, Brèthes L, Orteu JJ, Devy M (2015) Shape measurement using a new multi-step stereo-DIC algorithm that preserves sharp edges. Exp Mech 55(1):167–176CrossRef
10.
go back to reference Pan Z, Xia S, Gdoutou A, Ravichandran G (2015) Diffraction-assisted image correlation for three-dimensional surface profiling. Exp Mech 55(1):155–165CrossRef Pan Z, Xia S, Gdoutou A, Ravichandran G (2015) Diffraction-assisted image correlation for three-dimensional surface profiling. Exp Mech 55(1):155–165CrossRef
11.
go back to reference McNeill SR, Sutton MA, Miao Z, Ma J (1997) Measurement of surface profile using digital image correlation. Exp Mech 37(1):13–20CrossRef McNeill SR, Sutton MA, Miao Z, Ma J (1997) Measurement of surface profile using digital image correlation. Exp Mech 37(1):13–20CrossRef
12.
go back to reference Valle V, Hedan S, Cosenza P, Fauchille AL, Berjane M (2015) Digital image correlation development for the study of materials including multiple crossing cracks. Exp Mech 55(2):379–391CrossRef Valle V, Hedan S, Cosenza P, Fauchille AL, Berjane M (2015) Digital image correlation development for the study of materials including multiple crossing cracks. Exp Mech 55(2):379–391CrossRef
13.
go back to reference Sutton MA, Orteu JJ, Schreier H (2009) Image correlation for shape, motion and deformation measurements. Springer ISBN 978-0-387-78747-3 Sutton MA, Orteu JJ, Schreier H (2009) Image correlation for shape, motion and deformation measurements. Springer ISBN 978-0-387-78747-3
14.
go back to reference Reu P (2012) Hidden components of 3D-DIC: Interpolation and matching – part 1. Exp Tech 36:3–5 Reu P (2012) Hidden components of 3D-DIC: Interpolation and matching – part 1. Exp Tech 36:3–5
15.
go back to reference Léandry I, Brèque C, Valle V (2012) Calibration of structured light projection system: development to large dimension objects. Opt Lasers Eng 50(3):373–379CrossRef Léandry I, Brèque C, Valle V (2012) Calibration of structured light projection system: development to large dimension objects. Opt Lasers Eng 50(3):373–379CrossRef
16.
go back to reference Léandry I. (2012) Adaptation de la méthode de projection de franges pour la mesure de relief de grands objets et pour la modélisation anthropométrique : Application à l’étude de flotteurs sous pression et au suivi de pathologie de l’abdomen. Thèse de l’Université de Poitiers, http://theses.univ-poitiers.fr/notice/view/22242 Léandry I. (2012) Adaptation de la méthode de projection de franges pour la mesure de relief de grands objets et pour la modélisation anthropométrique : Application à l’étude de flotteurs sous pression et au suivi de pathologie de l’abdomen. Thèse de l’Université de Poitiers, http://​theses.​univ-poitiers.​fr/​notice/​view/​22242
17.
go back to reference Bretagne N, Valle V, Dupré JC (2005) Development of the marks tracking technique for strain field and volume variation measurements. NDT&E Int 38(4):290–298CrossRef Bretagne N, Valle V, Dupré JC (2005) Development of the marks tracking technique for strain field and volume variation measurements. NDT&E Int 38(4):290–298CrossRef
18.
go back to reference Pan B, Qian K, Xie H, Asundi A (2009) Two-dimensional digital image correlation for in-plane displacement and strain measurement: a review. Meas Sci Technol 20(6):1–17CrossRef Pan B, Qian K, Xie H, Asundi A (2009) Two-dimensional digital image correlation for in-plane displacement and strain measurement: a review. Meas Sci Technol 20(6):1–17CrossRef
19.
go back to reference Reu P (2012) Hidden components of 3D-DIC: Interpolation and matching – part 2. Exp Tech 36(3):3–4 Reu P (2012) Hidden components of 3D-DIC: Interpolation and matching – part 2. Exp Tech 36(3):3–4
20.
go back to reference Fauchille AL, Hedan S, Valle V, Pret D, Cabrera J, Cosenza P (2016) Multi-scale study on the deformation and fracture evolution of a clay-rock sample subjected to desiccation. Appl Clay Sci 132–133:251–260CrossRef Fauchille AL, Hedan S, Valle V, Pret D, Cabrera J, Cosenza P (2016) Multi-scale study on the deformation and fracture evolution of a clay-rock sample subjected to desiccation. Appl Clay Sci 132–133:251–260CrossRef
21.
go back to reference Houben H, Guillaud H (1989) Traité de construction en terre. Ed Parenthèses ISBN 2-86364-161-1 Houben H, Guillaud H (1989) Traité de construction en terre. Ed Parenthèses ISBN 2-86364-161-1
22.
go back to reference Fitzmaurice R (1958) Manual on Stabilised Soil. Construction for Housing United Nations New York Fitzmaurice R (1958) Manual on Stabilised Soil. Construction for Housing United Nations New York
23.
go back to reference Paul WL, Taylor PA (2008) A comparison of occupant comfort and satisfaction between a green building and a conventional building. Build Environ 43:1858–1870CrossRef Paul WL, Taylor PA (2008) A comparison of occupant comfort and satisfaction between a green building and a conventional building. Build Environ 43:1858–1870CrossRef
24.
go back to reference Aubert JE, Maillard P, Morel JC, Al Rafii M (2016) Towards a simple compressive strength test for earth bricks? Mater Struct 49(5):1641–1654CrossRef Aubert JE, Maillard P, Morel JC, Al Rafii M (2016) Towards a simple compressive strength test for earth bricks? Mater Struct 49(5):1641–1654CrossRef
25.
go back to reference Taylor P, Fuller RJ, Luther MB (2008) Energy use and thermal comfort in a rammed earth office building. Energ Buildings 40:793–800CrossRef Taylor P, Fuller RJ, Luther MB (2008) Energy use and thermal comfort in a rammed earth office building. Energ Buildings 40:793–800CrossRef
26.
go back to reference Mostafa M, Uddin N (2016) Experimental analysis of compressed earth block (CEB) with banana fibers resisting flexural and compression forces. Case Stud Constr Mater 5:53–63CrossRef Mostafa M, Uddin N (2016) Experimental analysis of compressed earth block (CEB) with banana fibers resisting flexural and compression forces. Case Stud Constr Mater 5:53–63CrossRef
27.
go back to reference Morel JC, P’kla A, Di Benedetto H (2003) Essai in situ sur blocs de terre comprimé, Interprétation en compression ou traction de l’essai de flexion en trios points. Revue française de génie civil 7(2):221–237 Morel JC, P’kla A, Di Benedetto H (2003) Essai in situ sur blocs de terre comprimé, Interprétation en compression ou traction de l’essai de flexion en trios points. Revue française de génie civil 7(2):221–237
Metadata
Title
Crack Analysis in Mudbricks under Compression Using Specific Development of Stereo-Digital Image Correlation
Authors
V. Valle
L. Laou
I. Léandry
S. Yotte
S. Rossignol
S. Hedan
Publication date
11-12-2017
Publisher
Springer US
Published in
Experimental Mechanics / Issue 3/2018
Print ISSN: 0014-4851
Electronic ISSN: 1741-2765
DOI
https://doi.org/10.1007/s11340-017-0363-2

Other articles of this Issue 3/2018

Experimental Mechanics 3/2018 Go to the issue

Premium Partners