Top

Computer Supported Cooperative Work (CSCW)

Published in:

10-05-2019

Cyber-Physical Systems for Knowledge and Expertise Sharing in Manufacturing Contexts: Towards a Model Enabling Design

Authors: Sven Hoffmann, Aparecido Fabiano Pinatti de Carvalho, Darwin Abele, Marcus Schweitzer, Peter Tolmie, Volker Wulf

Published in: Computer Supported Cooperative Work (CSCW) | Issue 3-4/2019

Activate our intelligent search to find suitable subject content or patents.

search-config

AI-assisted search

Off

Abstract

Cyber-physical systems (CPS) are currently attracting a great deal of attention as a part of the discourse surrounding the fourth industrial revolution. Thus far, the chief focus has been upon complex architectures for supply chain-wide data exchange between intelligent machines. Here, however, we take a very different tack by examining the support CPS may offer for the exchange and acquisition of knowledge-intensive human practices in the context of manual set-up processes on modern production machines. The paper offers contributions to both CSCW and the ongoing development of CPS in three ways. Firstly, it presents a detailed empirical study of knowledge and expertise sharing practices in a production environment. Secondly, the results of this study are used as the basis of an over-arching model that was developed with the express purpose of facilitating design. Finally, CPS-based technical possibilities are matched to the practice-relevant knowledge and expertise sharing requirements captured within the model.

previous article The Virtual Clinic: Two-sided Affordances in Consultation Practice

next article Rethinking Financial Inclusion: from Access to Autonomy

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

inform now

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

inform now

Springer Professional "Wirtschaft"

Online-Abonnement

Mit Springer Professional "Wirtschaft" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 340 Zeitschriften

aus folgenden Fachgebieten:

Bauwesen + Immobilien
Business IT + Informatik
Finance + Banking
Management + Führung
Marketing + Vertrieb
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

inform now

Clearly, despite the grand vision, CPS will not be able to solve all of the problems with KES. Some of the more organisationally-founded issues will remain beyond its remit. Most importantly, CPS technology is relatively new and has a long way to go before achieving its full potential. In our view, this does not preclude the value of what it may have to offer from a research perspective (see de Carvalho et al. 2018).

In manufacturing contexts CPS have been termed cyber-physical production systems (CPPS) (Monostori et al. 2016). CPPS are just CPS to support manufacturing processes. For simplicity’s sake we will use CPS throughout the paper, even when talking about manufacturing contexts.

There has been extensive debate regarding ‘tacit knowledge’ in CSCW – see Schmidt (2012) for a thorough discussion of the matter. We will not enter into this discussion here because we are simply concerned with acknowledging research that has been performed in related areas. In de Carvalho et al. (2018), we argue, in line Schmidt’s position on KES, that much of what has been deemed tacit is not tacit at all, just embedded in embodied action and visible in other ways apart from propositions.

Shadowing is a special type of observation, where a researcher shadows the participant, following them wherever they go (Czarniawska 2007). This technique is of particular relevance for the collection of situated data regarding issues surrounding the main focus of the study. In our case, whilst the observations focused on the set-up process, the shadowing focused on other processes that might have an impact on it. By doing this, we sought to achieve a more nuanced understanding of the social and organisational environment where the process we set out to support was unfolding.

https://www.tobiipro.com/product-listing/tobii-pro-glasses-2/, accessed on 20. October 2018

In the case of the videos, codes were associated with time frames, just as they were associated with sentences or paragraphs in the transcribed data.

Didactic practices describe the ability of a knowledgeable person to effectively communicate knowledge relating to a specific job by demonstrating it to a knowledge seeker in the course of a knowledge transfer process (Schmidt 2012).

The Unified Architecture (UA) from the OPC foundation: https://opcfoundation.org/about/opc-technologies/opc-ua/, accessed on 2nd November 2018.

Ackerman, Mark S. (1998). Augmenting Organizational Memory: A Field Study of Answer Garden. ACM Transactions on Information Systems, vol. 16, no. 3, July 1998, pp. 203–224.

Ackerman, Mark S.; and Thomas W. Malone (1990). Answer Garden: A Tool for Growing Organizational Memory. In F. H. Lochovsky and R. B. Allen (eds): COCS’90. Proceedings of the ACM SIGOIS and IEEE CS TC-OA Conference on Office Information Systems, Cambridge, Massachusetts, USA, 25-27 April 1990. New York: ACM Press, pp. 31–39.

Ackerman, Mark S.; and David W. McDonald (1996). Answer Garden 2: Merging Organizational Memory with Collaborative Help. In M. S. Ackerman (ed): CSCW’96. Proceedings of the 1996 ACM Conference on Computer Supported Cooperative Work, Boston, Massachusetts, USA, 16 - 20 November, 1996. New York: ACM Press, pp. 97–105.

Ackerman, Mark S., Juri Dachtera; Volkmar Pipek; and Volker Wulf (2013). Sharing Knowledge and Expertise: The CSCW View of Knowledge Management. Computer Supported Cooperative Work (CSCW), vol. 22, no. 4–6, August 2013, pp. 531–573.

Adamic, Lada A.; Jun Zhang; Eytan Bakshy; and Mark S. Ackerman (2008). Knowledge sharing and yahoo answers: Everyone knows something. In: WWW'08. Proceedings of the 17th International Conference on World Wide Web, Beijing, China, 21- 25 April 2008. New York: ACM Press, pp. 665–674.

Alexander, Christopher (1977). A pattern language: Towns, buildings, construction. New York: Oxford University Press.

Argote, Linda; and Paul Ingram (2000). Knowledge Transfer: A Basis for Competitive Advantage in Firms. Organizational Behavior and Human Decision Processes, vol. 82, no. 1, May 2000, pp. 150 - 169.

Banker, Rajiv D.; Gordon Potter; and Roger G. Schroeder (1993). Reporting manufacturing performance measures to workers: an empirical study. Journal of Management Accounting Research, vol. 5, no. 1, Fall 1993, pp. 33 - 55.

Benford, Steve; John A. Mariani; Leandro Navarro Moldes; Wolfgang Prinz; and Tom Rodden (1993). MOCCA: an environment for CSCW applications. In: COCS’93. Proceedings of the Conference on Organizational Computing Systems, Milpitas, California, 1 - 4 November 1993. New York: ACM, pp. 172–177.

Bolisani, Ettore; and Enrico Scarso (1999). Information technology management: A knowledge-based perspective. Technovation, vol. 19, no. 4, February 1999, pp. 209–217.

Bossen, Claus; Lars Rune Christensen; Erik Grönvall; and Lasse Steenbock Vestergaard (2013). CareCoor: Augmenting the coordination of cooperative home care work. International Journal of Medical Informatics, vol. 82, no. 5, May 2013, pp. e189–e199.

Braun, Virginia; and Victoria Clarke (2012). Thematic analysis. In H. Cooper; P. M. Camic; D. L. Long; A. T. Panter; D. Rindskopf; and K. J. Sher (eds): APA Handbook of Research Methods in Psychology, Vol. 2. Research Designs: Quantitative, Qualitative, Neuropsychological, and Biological. Washington, DC: American Psychological Association, pp. 57–71.

Bryman, A. (2008). Social Research Methods. New York: Oxford University Press.

Button, Graham; and Richard Harper (1995). The relevance of ‘work-practice’ for design. Computer Supported Cooperative Work (CSCW), vol. 4, no. 4, December 1995, pp. 263–280.

Button, Graham; and Wes Sharrock (1997). The Production of Order and the Order of Production: Possibilities for Distributed Organisations, Work and Technology in the Print Industry. In J. A. Hughes; W. Prinz; T. Rodden; and K. Schmidt: ECSCW'97. Proceedings of the Fifth European Conference on Computer Supported Cooperative Work, Lancaster, UK, 7-11 September 1997. Dordrecht: Kluwer Academic Publishers, pp. 1–16.

Carstensen, Peter; Kjeld Schmidt; and Uffe Kock Wiil (1999). Supporting shop floor intelligence: A CSCW approach to production planning and control in flexible manufacturing. In: GROUP’99. Proceedings of the International ACM SIGGROUP Conference on Supporting Group Work, Phoenix, Arizona, 14 - 17 November 1999. New York: ACM Press, pp. 111–120.

Clarke, Karen; John Hughes; Dave Martin; Mark Rouncefield; Ian Sommerville; Corin Gurr; Mark Hartswood; Rob Procter; Roger Slack; and Alex Voss (2003). Dependable Red Hot Action. In K. Kuutti; E. H. Karsten; G. Fitzpatrick; P. Dourish; and K. Schmidt (eds): ECSCW’03. Proceedings of the Eighth European Conference on Computer-Supported Cooperative Work, Helsinki, Finland, 14- 18 September 2003. Dordrecht: Springer, pp. 61-80.

Crabtree, Andy; Terry Hemmings; and Tom Rodden (2002). Pattern-based support for interactive design in domestic settings. In: DIS'02. Proceedings of the 4th Conference on Designing Interactive Systems: Processes, Practices, Methods, and Techniques, London, England, 25 - 28 June 2002. New York: ACM, pp. 265 - 276.

Czarniawska, Barbara (2007). Shadowing, and Other Techniques for Doing Fieldwork in Modern Societies. Herndon: Copenhagen Business School Press.

de Carvalho, Aparecido Fabiano Pinatti; Sven Hoffmann; Darwin Abele; Marcus Schweitzer; Peter Tolmie; David Randall; and Volker Wulf (2018). Of Embodied Action and Sensors: Knowledge and Expertise Sharing in Industrial Set-up. Computer Supported Cooperative Work (CSCW), vol. 27, nos 3-6, December 2018, pp. 875–916.

De Michelis, Giorgio; and M. Antonietta Grasso (1994). Situating conversations within the language/action perspective: The Milan Conversation Model. In: CSCW ’94. Proceedings of the 1994 ACM Conference on Computer supported cooperative work, Chapel Hill, North Carolina, USA, 22 - 26 October 1994. New York, ACM, pp. 89–100.

Denef, Sebastian; and David Keyson (2012). Talking about implications for design in pattern language. In: CHI’12. Proceedings of the SIGCHI Conference on Human Factors in Computing Systems, Austin, Texas, USA, 5 - 10 May 2012. New York, ACM, pp. 2509 - 2518.

Diggins, Tim; and Peter Tolmie (2003). The 'Adequate' Design of Ethnographic Outputs for Practice: Some Explorations of the Characteristics of Design Resources. Personal Ubiquitous Computing, vol. 7, nos 3-4, July 2003, pp. 147–158.

Divitini, Monica; Guiseppe Omodei Salè; Alberto Pozzoli; and Carla Simone (1993). Supporting the dynamics of knowledge sharing within organizations. In: COCS’93. Proceedings of the Conference on Organizational Computing Systems, Milpitas, California, 1 - 4 November 1993. New York: ACM, pp. 178–183.

Doetsch, Stefan (2016). Wissenstransfer bei der Reintegration von Expatriates: Theoretische und empirische Analyse unternehmensinterner Strukturen und Prozesse. Wiesbaden: Springer-Verlag.

Döring, Helge (2016). Wissensmanagement in Familienunternehmen. Wiesbaden: Springer Fachmedien GmbH.

Ellis, Clarence; and Jacques Wainer (1994). A Conceptual Model of Groupware. In: CSCW’94. Proceedings of the 1994 ACM Conference on Computer Supported Cooperative Work, Chapel Hill, North Carolina, USA, 22 - 26 October 1994. New York: ACM, pp. 79–88.

Fu, Wai-Tat (2008). The Microstructures of Social Tagging: A Rational Model. In: CSCW’08. Proceedings of the 2008 ACM Conference on Computer Supported Cooperative Work, San Diego, California, USA, 8 - 12 November 2008. New York: ACM, pp. 229–238.

Gauglitz, Steffen; Cha Lee; Matthew Turk; and Tobias Höllerer (2012). Integrating the Physical Environment into Mobile Remote Collaboration. In: MobileHCI’12. Proceedings of the 14th International Conference on Human-computer Interaction with Mobile Devices and Services, San Francisco, California, USA, 21 - 24 September 2012. New York: ACM, pp. 241–250.

Gauglitz, Steffen, Benjamin Nuernberger; Matthew Turk; and Tobias Höllerer (2014). World-stabilized annotations and virtual scene navigation for remote collaboration. In: UIST '14. Proceedings of the 27th Annual ACM Symposium on User Interface Software and Technology, Honolulu, Hawaii, USA, 5 - 8 October 2014. New York: ACM, pp. 449–459.

Goh, Swee C. (2002). Managing effective knowledge transfer: An integrative framework and some practice implications. Journal of Knowledge Management, vol. 6, no. 1, pp. 23–30.

Harper, Richard; Rob Procter; Dave Randall; and Mark Rouncefield (2001). 'Safety in Numbers': Calculation and Document Re-use in Knowledge Work. In: GROUP'01. Proceedings of the 2001 International ACM SIGGROUP Conference on Supporting Group Work, Boulder, Colorado, USA, 30 September - 3 October 2001. New York: ACM, pp. 242–251.

Hendriks, Paul (1999). Why share knowledge? The influence of ICT on the motivation for knowledge sharing. Knowledge and Process Management, vol. 6, no. 2, June 1999, pp. 91–100.

Hickley, Anne (2016). Verbatim, Intelligent Verbatim or Edited Transcription? http://penguin-transcription.co.uk/transcription-type-verbatim-intelligent-verbatim-or-edited/. Accessed 20 October 2018.

Hoffmann, Alexander (2009). Entwicklung eines Ordnungsrahmens zur Analyse von intraorganisationalem Wissenstransfer. Ph.D. dissertation. Goethe-Universität, Frankfurt am Main: Wirtschaftswissenschaften.

Holtzblatt, Karen; and Sandra Jones (2017). Contextual inquiry: A participatory technique for system design. In D. Schuler; and A. Namioka (eds.): Participatory Design: Principles and Practices. Hillsdale, New Jersey: Lawrence Erlbaum Associates, pp. 177–210.

Jeschke, Sabina; Christian Brecher; Tobias Meisen; Denis Özdemir; and Tim Eschert (2017). Industrial Internet of Things and Cyber Manufacturing Systems. In S. Jeschke; C. Brecher; H. Song; and Dunda B. Rawat (eds.): Industrial Internet of Things. Wiesbaden, Germany: Springer International Publishing, pp. 3–19.

Kalyuga, Slava (2009). Managing Cognitive Load in Adaptive Multimedia Learning. Hershey: IGI Global.

Klopfer, Eric; Judy Perry; Kurt Squire; and Ming-fong Jan (2005). Collaborative Learning through Augmented Reality Role Playing. In: CSCL’05. Proceedings of the 2005 Conference on Computer Support for Collaborative Learning: Learning 2005: the Next 10 years!, Taipei, Taiwan, 30 May – 4 June 2005. International Society of the Learning Sciences, pp. 311–315.

Lapré, Michael A.; Amit Shankar Mukherjee; and Luk N. Van Wassenhove (2000). Behind the Learning Curve: Linking Learning Activities to Waste Reduction. Management Science, vol. 46, no. 5, May 2000, pp. 597–611.

Lave, Jean; and Etienne Wenger (1991). Situated Learning: Legitimate Peripheral Participation. Cambridge: Cambridge University Press

Lee, Edward A. (2008). Cyber Physical Systems: Design Challenges. In: ISORC'08. Proceedings of the 11th IEEE International Symposium on Object Oriented Real-Time Distributed Computing, Orlando, Florida, 5-7 May 2008. New York: IEEE, pp. 363-369.

Lee, Charlotte P.; and Drew Paine (2015). From The Matrix to a Model of Coordinated Action (MoCA): A Conceptual Framework of and for CSCW. In: CSCW'15. Proceedings of the 18th ACM Conference on Computer Supported Cooperative Work & Social Computing, Vancouver, British Columbia, Canada, 14 - 18 March 2015. New York: ACM, pp. 179–194.

Lee, Edward Ashford; and Sanjit A. Seshia (2015). Introduction to Embedded Systems: A Cyber-Physical Systems Approach. Cambridge: MIT Press.MATH

Lee, Jay; Behrad Bagheri; and Hung An Kao (2015). A Cyber-Physical Systems Architecture for Industry 4.0-Based Manufacturing Systems. Manufacturing Letters, vol. 3, January 2015, pp. 18–23.

Liu, Yang; Yu Peng; Bailing Wang; Sirui Yao; and Zihe Liu (2017). Review on cyber-physical systems. IEEE/CAA Journal of Automatica Sinica, vol. 4, no. 1, January 2017, pp. 27–40.

Lu, Yang (2017). Industry 4.0: A survey on technologies, applications and open research issues. Journal of Industrial Information Integration, vol. 6, June 2017, pp. 1-10.

Mainwaring, Scott D.; and Charlotte P. Lee (2017). Turnover and the Model of Coordinated Action (MoCA). In: CSCW'17. Companion of the 2017 ACM Conference on Computer Supported Cooperative Work and Social Computing, Portland, Oregon, USA, 25 February - 1 March 2017. New York: ACM, pp. 239–242.

Majchrzak, Ann; Samer Faraj; Gerald C. Kane; and Bijan Azad (2013). The contradictory influence of social media affordances on online communal knowledge sharing. Journal of Computer-Mediated Communication, vol. 19, no. 1, October 2013, pp. 38–55.

Maly, Ivo; David Sedlacek; and Paulo Leitão (2016). Augmented Reality Experiments with Industrial Robot in Industry 4.0 . In: INDIN'16. Proceedings of the 2016 IEEE 14th International Conference on Industrial Informatics, Poitiers, France, 19 - 21 July 2016. New York: IEEE, pp. 176–181.

Martin, David; Mark Rouncefield; and Ian Sommerville (2002). Applying Patterns of Cooperative Interaction To Work (Re) Design: E-Government and Planning. In: CHI'02. Proceedings of the SIGCHI Conference on Human Factors in Computing Systems. Minneapolis, Minnesota, USA, 20 - 25 April 2002. New York: ACM, pp. 235–242.

Monostori, L.; B. Kádár; T. Bauernhansl; S. Kondoh; S. Kumara; G. Reinhart; O. Sauer; G. Schuh; W. Sihn; and K. Ueda (2016). Cyber-physical systems in manufacturing. CIRP Annals, vol. 65, no. 2, 2016, pp. 621–641.

Morris, Meredith Ringel; Jaime Teevan; and Katrina Panovich (2010). A Comparison of Information Seeking Using Search Engines and Social Networks. In: ICWSM'10. Proceedings of the Fourth International AAAI Conference on Weblogs and Social Media, Washington, DC, USA, 23 - 26 May 2010. Menlo Park, Calif: AAAI, pp. 23–26.

National Institute of Standards and Technology (2013). Foundations for Innovation: Strategic R&D Opportunities for 21st Century Cyber-physical Systems: Connecting Computer and Information Systems With the Physical World. Maryland, USA: National Institute of Standards and Technology.

Nielsen, Jakob; and Rolf Molich (1990). Heuristic Evaluation of user interfaces. In: CHI’90. Proceedings of the SIGCHI Conference on Human Factors in Computing Systems, Seattle, Washington, USA, 1 - 5 April 1990. New York: ACM, pp. 249–256.

Nonaka, Ikujiro (1988). Toward Middle-Up-Down Management: Accelerating Information Creation. Sloan Management Review, vol. 29, no. 3, Spring 1988, pp. 9–18.

Nonaka, Ikujiro (1991). The Knowledge-creating Company. Harvard Business Review, November-December 1991, pp. 96–104.

Nonaka, Ikujiro; and Hirotaka Takeuchi (1995). The Knowledge-Creating Company: How Japanese Companies Create the Dynamics of Innovation. New York and Oxford: Oxford University Press.

Nonaka, Ikujiro; and Georg Von Krogh (2009). Tacit Knowledge and Knowledge Conversion: Controversy and Advancement in Organizational Knowledge Creation Theory. Organization Science, vol. 20, no. 3, May - June 2009, pp. 635–652.

Nonaka, Ikujiro; Ryoko Toyama; and Noboru Konno (2000). SECI, Ba and Leadership: A Unified Model of Dynamic Knowledge Creation. Long Range Planning, vol. 33, no. 1, February 2000, pp. 5–34.

Normark, Maria; and Dave Randall (2005). In H. Gellersen; K. Schmidt; M. Beaudouin-Lafon; and W. Mackay (eds.): ECSCW'05. Proceedings of the Ninth European Conference on Computer-Supported Cooperative Work, Paris, France, 18–22 September 2005. Dordrecht: Springer Netherlands, pp. 347–366.

Orr, Julian E. (1996). Talking about machines: An ethnography of a modern job. London: Cornell University Press.

Paas, Fred; Alexander Renkl; and John Sweller (2004). Cognitive Load Theory: Instructional Implications of the Interaction between Information Structures and Cognitive Architecture. Instructional Science, vol. 32, no. 1, January 2004, pp. 1–8.

Pacaux-Lemoine, Marie-Pierre; Quentin Berdal; Simon Enjalbert; and Damien Trentesaux (2018). Towards human-based industrial cyber-physical systems. In: ICPS'18. Proceedings - 2018 IEEE Industrial Cyber-Physical Systems, St. Petersburg, Russia, 15-18 May 2018. New York: IEEE, pp. 615–620.

Patterson, Robert E.; Leslie M. Blaha; Georges G. Grinstein; Kristen K. Liggett; David E. Kaveney; Kathlenn C. Sheldon; Paul R. Moore; and Jason A. Moore (2014). A human cognition framework for information visualization. Computers and Graphics, vol.42, no. 1, August 2014, pp. 42–58.

Peinl, Rene (2006). A Knowledge Sharing Model illustrated with the Software Development Industry. In F. Lehner; H. Nösekabel; and P. Kleinschmidt (eds.): Multikonferenz Wirtschaftsinformatik 2006, Passau, Germany, 20–22 February 2006. Berlin: GITO-Verlag, pp. 389–401.

Pisano, Gary P. (1996). Learning-before-doing in the development of new process technology. Research Policy, vol. 25, no. 7, October 1996, pp. 1097-1119.

Ponton, Michael K.; Derrick M. Gail; and Paul B. Carr (2005). The Relationship between Resourcefulness and Persistence in Adult Autonomous Learning. Adult Education Quarterly, vol. 55, no. 2, February 2005, pp. 116-128.

Raelin, Joseph A. (1997). A model of work-based learning. Organization Science, vol. 8, no. 6, December 1997, pp. 563–578.

Rajkumar, Ragunathan, Insup Lee; Lui Sha; and John Stankovic (2010). Cyber-physical systems: The next computing revolution. In: DAC'10. Design Automation Conference, Anaheim, California, 13 - 18 June 2010. New York: IEEE, pp. 731-736.

Randall, David; Jon O’Brien; Mark Rouncefield; and John A. Hughes (1996). Organisational memory and CSCW: Supporting the ‘Mavis Phenomenon’. In: Proceedings of the Sixth Australian Conference on Computer-Human Interaction, Hamilton, New Zealand, 24 - 27 November 1996. New York: IEEE, pp. 26–33.

Roberts, Joanne (2000). From Know-how to Show-how? Questioning the Role of Information and Communication Technologies in Knowledge Transfer. Technology Analysis & Strategic Management, vol. 12, no. 4, 2000, pp. 429–443.MathSciNet

Robinson, Mike; Mikko Kovalainen; and Esa Auramaki (2000). Diary as dialogue in papermill process control. Communications of the ACM, vol. 43, no. 1, 2000, p 65.

Ryle, Gilbert (1945). Knowing How and Knowing That: The Presidential Address. Proceedings of the Aristotelian Society, New Series, vol. 46, 1945-1946, pp. 1–16.

Ryle, Gilbert (2009). The concept of mind. Abingdon, Oxon: Routledge.

Salvador, Tony; and Michael Mateas (1997). Introduction to Design Ethnography. In: CHI EA’97. CHI '97 Extended Abstracts on Human Factors in Computing Systems, Atlanta, Georgia, USA, 22 - 27 March 1997. New York: ACM, pp. 166–167.

Schlechtendahl, Jan; Matthias Keinert; Felix Kretschmer; Armin Lechler; and Alexander Verl (2015). Making existing production systems Industry 4.0-ready. Production Engineering, vol. 9, no. 1, February 2015, pp. 143–148.

Schmidt, Kjeld (2012). The trouble with "tacit knowledge". Computer Supported Cooperative Work (CSCW), vol. 21, no. 2–3, June 2012, pp. 163–225.

Schorta, Silvia (2018). Der Vorgesetzte als Initiator und Motor des Wissenstransfers. In B. Ackermann; S. Schorta; O. Kranche; K. North; and K. Schildknecht (eds): Erfolgreicher Wissenstransfer in agilen Organisationen: Hintergrund - Methodik - Fallbeispiele. Wiesbaden: Springer Fachmedien, pp. 99 - 112.

Shingo, Shigeo (1985). A Revolution in Manufacturing: The SMED System. Portland: Productivity Press.

Simon, Rober; Robert Sclabassi; and Taieb Znati (1994). Communication Control in Computer Supported Cooperative Work Systems. In: CSCW'94. Proceedings of the 1994 ACM conference on Computer supported cooperative work, Chapel Hill, North Carolina, USA, 22 - 26 October 1994. New York: ACM, pp. 311–321.

Spender, J.-C. (1996). Organizational knowledge, learning and memory: three concepts in search of a theory. Journal of Organizational Change Management, vol. 9, no. 1, January 1996, pp. 63–78.

Stone, Eugene F.; and Dianna L. Stone (1984). The Effects of Multiple Sources of Performance Feedback and Feedback Favorability on Self-Perceived Task Competence and Perceived Feedback Accuracy. Journal of Management, vol. 10, no. 3, September 1984, pp. 371–378.

Sweller, John (1994). Cognitive Load Theory , Learning Difficulty , and Instructional Design. Learning and Instruction, vol. 4, no. 4, 1994, pp. 295–312.

Szulanski, Gabriel (2000). The Process of Knowledge Transfer: A Diachronic Analysis of Stickiness. Organizational Behavior and Human Decision Processes, vol. 82, no. 1, May 2000, pp. 9–27.

Treude, Christoph; Ohad Barzilay; and Margarete-Anne Storey (2011). How do programmers ask and answer questions on the web? In: ICSE'11. Proceeding of the 33rd International Conference on Software Engineering, Honolulu, Hawaii, 21 - 28 May 2011. New York: IEEE, pp. 804-807.

Vasilescu, Bogdan, Vladimir Filkov; and Alexander Serebrenik (2013). Stackoverflow and github: Associations between software development and crowdsourced knowledge. In: SocialCom'13. 2013 International Conference on Social Computing, Alexandria, Virginia, 8 - 14 September 2013. New York: IEEE, pp. 188–195.

Vasilescu, Bogdan; Alexander Serebrenik, Prem Devanbu; and Vladimir Filkov (2014). How social Q&A sites are changing knowledge sharing in open source software communities. In: CSCW'14. Proceedings of the 17th ACM conference on Computer Supported Cooperative Work & Social Computing, Baltimore, Maryland, USA, 15 - 19 February 2014. New York: ACM, pp. 342–354.

Velden, Theresa (2013). Explaining field differences in openness and sharing in scientific communities. In: CSCW'13. Proceedings of the 2013 conference on Computer supported cooperative work, San Antonio, Texas, USA, 23 - 27 February 2013. New York: ACM, pp. 445-458.

Wakkary, Ron; Madison Poon; Leah Maestri; Travis Kirton; Corey Julihn; and Ryan Betts (2007). How Informances can be Used in Design Ethnography. In: CHI’07. Extended Abstracts on Human Factors in Computing Systems, San Jose, California, USA, 28 April - 03 May 2007. New York: ACM.

Wang, Fei-Yue (2010). The emergence of intelligent enterprises: From CPS to CPSS. IEEE Intelligent Systems, vol. 25, no. 4, August 2010, pp. 85–88.

Wang, Lihui; Martin Törngren; and Mauro Onori (2015). Current Status and Advancements of Cyber-physical Systems in Manufacturing. Journal of Manufacturing Systems, vol. 37, no. 2, October 2015, pp. 517-527.

Watson, Sharon; and Kelly Hewett (2006). A multi-theoretical model of knowledge transfer in organizations: Determinants of knowledge contribution and knowledge reuse. Journal of Management Studies, vol. 43, no. 2, February 2006, pp. 141–173.

Wollersheim, Jutta; Michael Leyer; and Matthias Spörrle (2015). When more is not better: The effect of the number of learning interventions on the acquisition of process-oriented thinking. Management Learning, vol. 47, no. 2, June 2015, pp. 137–157.

Wright, Patricia (1977). Presenting technical information: a survey of research findings. Instructional Science, vol. 6, no. 2, April 1977, pp. 93–134.

Wulf, Volker; Claudia Müller; Volkmar Pipek; David Randall; Markus Rohde; and Gunnar Stevens (2015). Practice-Based Computing: Empirically Grounded Conceptualizations Derived from Design Case Studies. In V. Wulf; K. Schmidt; D. Randall (eds): Designing Socially Embedded Technologies in the Real-World. Computer Supported Cooperative Work. London: Springer, pp. 111–150.

Yamauchi, Yutaka; Jack Whalen; and Daniel G. Bobrow (2003). Information use of service technicians in difficult cases. In: CHI'03. Proceedings of the Conference on Human Factors in Computing Systems, Ft. Lauderdale, Florida, USA, 05 - 10 April 2003. New York: ACM, pp. 81-88.

Yang, Jiang; Lada A. Adamic, and Mark S. Ackerman (2008). Competing to Share Expertise: The Taskcn Knowledge Sharing. In: ICWSM'08. Proceedings of the Second International Conference on Weblogs and Social Media, Seattle, Washington, USA, 2008. Palo Alto: AAAI.

Yuen, Steve Chi-Yin; Gallayanee Yaoyuneyong; and Erik Johnson (2011). Augmented Reality: An Overview and Five Directions for AR in Education. Journal of Educational Technology Development and Exchange, vol. 4, no. 1, Article 11.

Zhou, Keliang; Taigang Liu; and Lifeng Zhou (2015). Industry 4 . 0 : Towards Future Industrial Opportunities and Challenges. In: FSKD'15. 12th International Conference on Fuzzy Systems and Knowledge Discovery, Zhangjiajie, China, 15 - 17 August 2015. New York: IEEE, pp. 2147–2152.

Zhu, J.; S. K. Ong; and A. Y. C. Nee (2014). A context-aware augmented reality system to assist the maintenance operators. International Journal on Interactive Design and Manufacturing, vol. 8, no. 4, November 2014, pp. 293–304.

Title: Cyber-Physical Systems for Knowledge and Expertise Sharing in Manufacturing Contexts: Towards a Model Enabling Design
Authors: Sven Hoffmann
Aparecido Fabiano Pinatti de Carvalho
Darwin Abele
Marcus Schweitzer
Peter Tolmie
Volker Wulf
Publication date: 10-05-2019
Publisher: Springer Netherlands
Published in: Computer Supported Cooperative Work (CSCW) / Issue 3-4/2019
Print ISSN: 0925-9724
Electronic ISSN: 1573-7551
DOI: https://doi.org/10.1007/s10606-019-09355-y

Springer Professional

Abstract

Please log in to get access to your license.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Springer Professional "Wirtschaft"

Other articles of this Issue 3-4/2019

Three Gaps in Opening Science

Online Harassment in the Workplace: the Role of Technology in Labour Law Disputes

Translation and Adoption: Exploring Vocabulary Work in Expert-Layperson Encounters

The Missing “Turn to Practice” in the Digital Transformation of Industry

Flexible Turtles and Elastic Octopi: Exploring Agile Practice in Knowledge Work

Exploring Indie Game Development: Team Practices and Social Experiences in A Creativity-Centric Technology Community

Premium Partner