Skip to main content
Top
Published in: Advances in Manufacturing 1/2017

Open Access 18-02-2017

Deformation, failure and removal mechanisms of thin film structures in abrasive machining

Authors: Cheng-Wei Kang, Han Huang

Published in: Advances in Manufacturing | Issue 1/2017

Log in

Activate our intelligent search to find suitable subject content or patents.

search-config
loading …

Abstract

Thin film structures are becoming increasingly more important for industrial applications such as the making of solar panels, microelectronic devices and micro systems. However, the challenges encountered in the machining of thin film structures have been a bottleneck that impedes further wide spread uses of such structures. The development of material removal processes that are capable of producing a damage free surface at high removal rates is critical for cost effective production. Such development relies highly on a comprehensive understanding of the deformation, failure and removal mechanisms of thin film structures involved in mechanical loading. In this paper, the current understanding of the deformation characteristics of thin film systems was reviewed to provide important insights into the interfacial failure under mechanical loading, with focuses on the interfacial failure mechanisms and existing problems in the machining of thin film structures. The key characterization techniques were outlined. In particular, the recent progress in the abrasive machining of a thin film multilayer structure was summarized. The potential research directions were also presented in the end of the review.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

  • über 102.000 Bücher
  • über 537 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Finance + Banking
  • Management + Führung
  • Marketing + Vertrieb
  • Maschinenbau + Werkstoffe
  • Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

  • über 67.000 Bücher
  • über 390 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Maschinenbau + Werkstoffe




 

Jetzt Wissensvorsprung sichern!

Literature
1.
go back to reference Bhusan B (2003) Springer handbook of nanotechnology. Springer, New York Bhusan B (2003) Springer handbook of nanotechnology. Springer, New York
2.
go back to reference Chen Y, McIntyre PC (2007) Lead zirconate titanate ferroelectric thin film capacitors: effects of surface treatments on ferroelectric properties. Appl Phys Lett 91:072910CrossRef Chen Y, McIntyre PC (2007) Lead zirconate titanate ferroelectric thin film capacitors: effects of surface treatments on ferroelectric properties. Appl Phys Lett 91:072910CrossRef
3.
go back to reference Jayaraman V, Lin Y, Pakala M et al (1995) Fabrication of ultrathin metallic membranes on ceramic supports by sputter deposition. J Membr Sci 99:89–100CrossRef Jayaraman V, Lin Y, Pakala M et al (1995) Fabrication of ultrathin metallic membranes on ceramic supports by sputter deposition. J Membr Sci 99:89–100CrossRef
4.
go back to reference Kim SS, Kim ST, Ahn JM et al (2004) Magnetic and microwave absorbing properties of Co-Fe thin films plated on hollow ceramic microspheres of low density. J Magn Magn Mater 271:39–45CrossRef Kim SS, Kim ST, Ahn JM et al (2004) Magnetic and microwave absorbing properties of Co-Fe thin films plated on hollow ceramic microspheres of low density. J Magn Magn Mater 271:39–45CrossRef
5.
go back to reference Bowden N, Brittain S, Evans AG et al (1998) Spontaneous formation of ordered structures in thin films of metals supported on an elastomeric polymer. Nature 393:146–149CrossRef Bowden N, Brittain S, Evans AG et al (1998) Spontaneous formation of ordered structures in thin films of metals supported on an elastomeric polymer. Nature 393:146–149CrossRef
6.
go back to reference Schmitt J, Decher G, Dressick WJ et al (1997) Metal nanoparticle/polymer superlattice films: fabrication and control of layer structure. Adv Mater 9:61–65CrossRef Schmitt J, Decher G, Dressick WJ et al (1997) Metal nanoparticle/polymer superlattice films: fabrication and control of layer structure. Adv Mater 9:61–65CrossRef
7.
go back to reference Bouclé J, Ravirajanac P, Nelson J (2007) Hybrid polymer-metal oxide thin films for photovoltaic applications. J Mater Chem 17:3141–3153 Bouclé J, Ravirajanac P, Nelson J (2007) Hybrid polymer-metal oxide thin films for photovoltaic applications. J Mater Chem 17:3141–3153
8.
go back to reference Ajayan PM, Schadler LS, Braun PV (2006) Nanocomposite science and technology. Wiley, New York Ajayan PM, Schadler LS, Braun PV (2006) Nanocomposite science and technology. Wiley, New York
9.
go back to reference Giannelis EP (1996) Polymer layered silicate nanocomposites. Adv Mater 8:29–35CrossRef Giannelis EP (1996) Polymer layered silicate nanocomposites. Adv Mater 8:29–35CrossRef
10.
go back to reference Favache A, Sacre CH, Coulombier M et al (2015) Fracture mechanics based analysis of the scratch resistance of thin brittle coatings on a soft interlayer. Wear 330:461–468CrossRef Favache A, Sacre CH, Coulombier M et al (2015) Fracture mechanics based analysis of the scratch resistance of thin brittle coatings on a soft interlayer. Wear 330:461–468CrossRef
11.
go back to reference Wang J, Neaton J, Zheng H et al (2003) Epitaxial BiFeO3 multiferroic thin film heterostructures. Science 299:1719–1722CrossRef Wang J, Neaton J, Zheng H et al (2003) Epitaxial BiFeO3 multiferroic thin film heterostructures. Science 299:1719–1722CrossRef
12.
go back to reference Pang SC, Anderson MA, Chapman TW (2000) Novel electrode materials for thin-film ultracapacitors: comparison of electrochemical properties of sol-gel-derived and electrodeposited manganese dioxide. J Electrochem Soc 147:444–450CrossRef Pang SC, Anderson MA, Chapman TW (2000) Novel electrode materials for thin-film ultracapacitors: comparison of electrochemical properties of sol-gel-derived and electrodeposited manganese dioxide. J Electrochem Soc 147:444–450CrossRef
13.
go back to reference Sumitomo T, Huang H, Zhou L (2011) Deformation and material removal in a nanoscale multi-layer thin film solar panel using nanoscratch. Int J Mach Tools Manuf 51:182–189CrossRef Sumitomo T, Huang H, Zhou L (2011) Deformation and material removal in a nanoscale multi-layer thin film solar panel using nanoscratch. Int J Mach Tools Manuf 51:182–189CrossRef
14.
go back to reference Sumitomo T, Huang H, Zhou L et al (2011) Nanogrinding of multi-layered thin film amorphous Si solar panels. Int J Mach Tools Manuf 51:797–805CrossRef Sumitomo T, Huang H, Zhou L et al (2011) Nanogrinding of multi-layered thin film amorphous Si solar panels. Int J Mach Tools Manuf 51:797–805CrossRef
15.
go back to reference Kim KS, Kim J (1988) Elasto-plastic analysis of the peel test for thin film adhesion. J Eng Mater Technol 110:266–273CrossRef Kim KS, Kim J (1988) Elasto-plastic analysis of the peel test for thin film adhesion. J Eng Mater Technol 110:266–273CrossRef
16.
go back to reference Hegemann D, Brunner H, Oehr C (2003) Plasma treatment of polymers for surface and adhesion improvement. Nucl Instrum Methods Phys Res Sect B 208:281–286CrossRef Hegemann D, Brunner H, Oehr C (2003) Plasma treatment of polymers for surface and adhesion improvement. Nucl Instrum Methods Phys Res Sect B 208:281–286CrossRef
17.
go back to reference Kohl JG, Singer IL (1999) Pull-off behavior of epoxy bonded to silicone duplex coatings. Prog Org Coat 36:15–20CrossRef Kohl JG, Singer IL (1999) Pull-off behavior of epoxy bonded to silicone duplex coatings. Prog Org Coat 36:15–20CrossRef
18.
go back to reference Ma Q (1997) A four-point bending technique for studying subcritical crack growth in thin films and at interfaces. J Mater Res 12:840–845CrossRef Ma Q (1997) A four-point bending technique for studying subcritical crack growth in thin films and at interfaces. J Mater Res 12:840–845CrossRef
19.
go back to reference Dayal P, Savvides N, Hoffman M (2009) Characterisation of nanolayered aluminium/palladium thin films using nanoindentation. Thin Solid Films 517:3698–3703CrossRef Dayal P, Savvides N, Hoffman M (2009) Characterisation of nanolayered aluminium/palladium thin films using nanoindentation. Thin Solid Films 517:3698–3703CrossRef
20.
go back to reference Pharr G, Oliver W (1992) Measurement of thin-film mechanical-properties using nanoindentation. MRS Bull 17:28–33CrossRef Pharr G, Oliver W (1992) Measurement of thin-film mechanical-properties using nanoindentation. MRS Bull 17:28–33CrossRef
21.
go back to reference Navamathavan R, Kim KK, Hwang DK et al (2006) A nanoindentation study of the mechanical properties of ZnO thin films on (0001) sapphire. Appl Surf Sci 253:464–467CrossRef Navamathavan R, Kim KK, Hwang DK et al (2006) A nanoindentation study of the mechanical properties of ZnO thin films on (0001) sapphire. Appl Surf Sci 253:464–467CrossRef
22.
go back to reference Fang TH, Chang WJ, Lin CM (2005) Nanoindentation and nanoscratch characteristics of Si and GaAs. Microelectron Eng 77:389–398CrossRef Fang TH, Chang WJ, Lin CM (2005) Nanoindentation and nanoscratch characteristics of Si and GaAs. Microelectron Eng 77:389–398CrossRef
23.
go back to reference Wu Y, Huang H, Zou J et al (2010) Nanoscratch-induced phase transformation of monocrystalline Si. Scripta Mater 63:847–850CrossRef Wu Y, Huang H, Zou J et al (2010) Nanoscratch-induced phase transformation of monocrystalline Si. Scripta Mater 63:847–850CrossRef
24.
go back to reference Wu Y, Huang H, Zou J et al (2009) Nanoscratch-induced deformation of single crystal silicon. J Vac Sci Technol B 27:1374–1377CrossRef Wu Y, Huang H, Zou J et al (2009) Nanoscratch-induced deformation of single crystal silicon. J Vac Sci Technol B 27:1374–1377CrossRef
25.
go back to reference Chang SY, Tsai HC, Chang JY et al (2008) Analyses of interface adhesion between porous SiOCH low-k film and SiCN layers by nanoindentation and nanoscratch tests. Thin Solid Films 516:5334–5338CrossRef Chang SY, Tsai HC, Chang JY et al (2008) Analyses of interface adhesion between porous SiOCH low-k film and SiCN layers by nanoindentation and nanoscratch tests. Thin Solid Films 516:5334–5338CrossRef
26.
go back to reference Kang C, Huang H (2016) Mechanical load-induced interfacial failure of a thin film multilayer in nanoscratching and diamond lapping. J Mater Process Technol 229:528–540CrossRef Kang C, Huang H (2016) Mechanical load-induced interfacial failure of a thin film multilayer in nanoscratching and diamond lapping. J Mater Process Technol 229:528–540CrossRef
27.
go back to reference Lu M, Xie H, Huang H et al (2013) Indentation-induced delamination of plasma-enhanced chemical vapor deposition silicon nitride film on gallium arsenide substrate. J Mater Res 28:1047–1055CrossRef Lu M, Xie H, Huang H et al (2013) Indentation-induced delamination of plasma-enhanced chemical vapor deposition silicon nitride film on gallium arsenide substrate. J Mater Res 28:1047–1055CrossRef
28.
go back to reference Roy S, Darque-Ceretti E, Felder E et al (2010) Experimental analysis and finite element modelling of nano-scratch test applied on 40–120 nm SiCN thin films deposited on Cu/Si substrate. Thin Solid Films 518:3859–3865CrossRef Roy S, Darque-Ceretti E, Felder E et al (2010) Experimental analysis and finite element modelling of nano-scratch test applied on 40–120 nm SiCN thin films deposited on Cu/Si substrate. Thin Solid Films 518:3859–3865CrossRef
29.
go back to reference Rao SS (2010) The finite element method in engineering. Elsevier, Amsterdam Rao SS (2010) The finite element method in engineering. Elsevier, Amsterdam
30.
go back to reference Torres-Torres D, Munoz-Saldana J, Gutierrez-Ladron-de Guevara L et al (2010) Geometry and bluntness tip effects on elastic–plastic behaviour during nanoindentation of fused silica: experimental and FE simulation. Model Simul Mater Sci Eng 18:1825–1830CrossRef Torres-Torres D, Munoz-Saldana J, Gutierrez-Ladron-de Guevara L et al (2010) Geometry and bluntness tip effects on elastic–plastic behaviour during nanoindentation of fused silica: experimental and FE simulation. Model Simul Mater Sci Eng 18:1825–1830CrossRef
31.
go back to reference Lee KM, Yeo CD, Polycarpou AA (2008) Relationship between scratch hardness and yield strength of elastic perfectly plastic materials using finite element analysis. J Mater Res 23:2229–2237CrossRef Lee KM, Yeo CD, Polycarpou AA (2008) Relationship between scratch hardness and yield strength of elastic perfectly plastic materials using finite element analysis. J Mater Res 23:2229–2237CrossRef
32.
go back to reference Lu M, Huang H (2014) Determination of the energy release rate in the interfacial delamination of silicon nitride film on gallium arsenide substrate via nanoindentation. J Mater Res 29:801–810CrossRef Lu M, Huang H (2014) Determination of the energy release rate in the interfacial delamination of silicon nitride film on gallium arsenide substrate via nanoindentation. J Mater Res 29:801–810CrossRef
33.
go back to reference Evans A, Drory M, Hu M (1988) The cracking and decohesion of thin films. J Mater Res 3:1043–1049CrossRef Evans A, Drory M, Hu M (1988) The cracking and decohesion of thin films. J Mater Res 3:1043–1049CrossRef
34.
go back to reference Fischer-Cripps AC (2006) Critical review of analysis and interpretation of nanoindentation test data. Surf Coat Technol 200:4153–4165CrossRef Fischer-Cripps AC (2006) Critical review of analysis and interpretation of nanoindentation test data. Surf Coat Technol 200:4153–4165CrossRef
35.
go back to reference Oliver WC, Pharr GM (1992) Improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experiments. J Mater Res 7:1564–1583CrossRef Oliver WC, Pharr GM (1992) Improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experiments. J Mater Res 7:1564–1583CrossRef
36.
go back to reference Gerberich W, Yu W, Kramer D et al (1998) Elastic loading and elastoplastic unloading from nanometer level indentations for modulus determinations. J Mater Res 13:421–439CrossRef Gerberich W, Yu W, Kramer D et al (1998) Elastic loading and elastoplastic unloading from nanometer level indentations for modulus determinations. J Mater Res 13:421–439CrossRef
37.
go back to reference Taylor CA, Wayne MF, Chiu WK (2003) Residual stress measurement in thin carbon films by Raman spectroscopy and nanoindentation. Thin Solid Films 429:190–200CrossRef Taylor CA, Wayne MF, Chiu WK (2003) Residual stress measurement in thin carbon films by Raman spectroscopy and nanoindentation. Thin Solid Films 429:190–200CrossRef
38.
go back to reference Marshall D, Evans A (1984) Measurement of adherence of residually stressed thin films by indentation. I. Mechanics of interface delamination. J Appl Phys 56:2632–2638CrossRef Marshall D, Evans A (1984) Measurement of adherence of residually stressed thin films by indentation. I. Mechanics of interface delamination. J Appl Phys 56:2632–2638CrossRef
39.
go back to reference Kriese MD, Gerberich WW, Moody NR (1999) Quantitative adhesion measures of multilayer films: part I. Indentation mechanics. J Mater Res 14:3007–3018CrossRef Kriese MD, Gerberich WW, Moody NR (1999) Quantitative adhesion measures of multilayer films: part I. Indentation mechanics. J Mater Res 14:3007–3018CrossRef
40.
go back to reference Chen J, Bull S (2007) Indentation fracture and toughness assessment for thin optical coatings on glass. J Phys D Appl Phys 40:5401–5407CrossRef Chen J, Bull S (2007) Indentation fracture and toughness assessment for thin optical coatings on glass. J Phys D Appl Phys 40:5401–5407CrossRef
41.
go back to reference Chen J, Bull S (2010) Approaches to investigate delamination and interfacial toughness in coated systems: an overview. J Phys D Appl Phys 44:369–379 Chen J, Bull S (2010) Approaches to investigate delamination and interfacial toughness in coated systems: an overview. J Phys D Appl Phys 44:369–379
42.
go back to reference Volinsky A, Moody N, Gerberich W (2002) Interfacial toughness measurements for thin films on substrates. Acta Mater 50:441–466CrossRef Volinsky A, Moody N, Gerberich W (2002) Interfacial toughness measurements for thin films on substrates. Acta Mater 50:441–466CrossRef
43.
go back to reference Burnett PJ, Rickerby D (1987) The mechanical properties of wear-resistant coatings: I: modelling of hardness behaviour. Thin Solid Films 148:41–50CrossRef Burnett PJ, Rickerby D (1987) The mechanical properties of wear-resistant coatings: I: modelling of hardness behaviour. Thin Solid Films 148:41–50CrossRef
44.
go back to reference Li X, Bhushan B (1998) Measurement of fracture toughness of ultra-thin amorphous carbon films. Thin Solid Films 315:214–221CrossRef Li X, Bhushan B (1998) Measurement of fracture toughness of ultra-thin amorphous carbon films. Thin Solid Films 315:214–221CrossRef
45.
go back to reference Chen J, Bull S (2009) Finite element analysis of contact induced adhesion failure in multilayer coatings with weak interfaces. Thin Solid Films 517:3704–3711CrossRef Chen J, Bull S (2009) Finite element analysis of contact induced adhesion failure in multilayer coatings with weak interfaces. Thin Solid Films 517:3704–3711CrossRef
46.
go back to reference Lu M, Huang H (2015) Interfacial adhesion of film/substrate system characterized by nanoindentation. In: Thin films and coatings: toughening and toughness characterization. CRC Press, pp 315–376 Lu M, Huang H (2015) Interfacial adhesion of film/substrate system characterized by nanoindentation. In: Thin films and coatings: toughening and toughness characterization. CRC Press, pp 315–376
47.
go back to reference Hudson JA, Harrison JP (2000) Engineering rock mechanics-an introduction to the principles. Elsevier, Amsterdam Hudson JA, Harrison JP (2000) Engineering rock mechanics-an introduction to the principles. Elsevier, Amsterdam
48.
go back to reference Abdul-Baqi A, Van der Giessen E (2001) Delamination of a strong film from a ductile substrate during indentation unloading. J Mater Res 16:1396–1407CrossRef Abdul-Baqi A, Van der Giessen E (2001) Delamination of a strong film from a ductile substrate during indentation unloading. J Mater Res 16:1396–1407CrossRef
49.
go back to reference Li X, Bhushan B (1999) Micro/nanomechanical and tribological characterization of ultrathin amorphous carbon coatings. J Mater Res 14:2328–2337CrossRef Li X, Bhushan B (1999) Micro/nanomechanical and tribological characterization of ultrathin amorphous carbon coatings. J Mater Res 14:2328–2337CrossRef
50.
go back to reference Zhang S, Sun D, Fu Y et al (2005) Toughness measurement of thin films: a critical review. Surf Coat Technol 198:74–84CrossRef Zhang S, Sun D, Fu Y et al (2005) Toughness measurement of thin films: a critical review. Surf Coat Technol 198:74–84CrossRef
51.
go back to reference Li X, Diao D, Bhushan B (1997) Fracture mechanisms of thin amorphous carbon films in nanoindentation. Acta Mater 45:4453–4461CrossRef Li X, Diao D, Bhushan B (1997) Fracture mechanisms of thin amorphous carbon films in nanoindentation. Acta Mater 45:4453–4461CrossRef
52.
go back to reference Liao C, Guo D, Wen S et al (2014) The assessment of interface adhesion of Cu/Ta/Black Diamond™/Si films stack structure by nanoindentation and nanoscratch tests. Tribol Lett 53:401–410CrossRef Liao C, Guo D, Wen S et al (2014) The assessment of interface adhesion of Cu/Ta/Black Diamond™/Si films stack structure by nanoindentation and nanoscratch tests. Tribol Lett 53:401–410CrossRef
53.
go back to reference Zhao X, Xie Z, Munroe P (2011) Nanoindentation of hard multilayer coatings: finite element modelling. Mater Sci Eng A 528:1111–1116CrossRef Zhao X, Xie Z, Munroe P (2011) Nanoindentation of hard multilayer coatings: finite element modelling. Mater Sci Eng A 528:1111–1116CrossRef
54.
go back to reference Lackner J, Major L, Kot M (2011) Microscale interpretation of tribological phenomena in Ti/TiN soft-hard multilayer coatings on soft austenite steel substrates. Bull Pol Acad Sci Tech Sci 59:343–355 Lackner J, Major L, Kot M (2011) Microscale interpretation of tribological phenomena in Ti/TiN soft-hard multilayer coatings on soft austenite steel substrates. Bull Pol Acad Sci Tech Sci 59:343–355
55.
go back to reference Sanchez J, El-Mansy S, Sun B et al (1999) Cross-sectional nanoindentation: a new technique for thin film interfacial adhesion characterization. Acta Mater 47:4405–4413CrossRef Sanchez J, El-Mansy S, Sun B et al (1999) Cross-sectional nanoindentation: a new technique for thin film interfacial adhesion characterization. Acta Mater 47:4405–4413CrossRef
56.
go back to reference Elizalde M, Sanchez J, Martinez-Esnaola J et al (2003) Interfacial fracture induced by cross-sectional nanoindentation in metal–ceramic thin film structures. Acta Mater 51:4295–4305CrossRef Elizalde M, Sanchez J, Martinez-Esnaola J et al (2003) Interfacial fracture induced by cross-sectional nanoindentation in metal–ceramic thin film structures. Acta Mater 51:4295–4305CrossRef
57.
go back to reference Ocaña I, Molina-Aldareguia J, Gonzalez D et al (2006) Fracture characterization in patterned thin films by cross-sectional nanoindentation. Acta Mater 54:3453–3462CrossRef Ocaña I, Molina-Aldareguia J, Gonzalez D et al (2006) Fracture characterization in patterned thin films by cross-sectional nanoindentation. Acta Mater 54:3453–3462CrossRef
58.
go back to reference Scherban T, Pantuso D, Sun B et al (2003) Characterization of interconnect interfacial adhesion by cross-sectional nanoindentation. Int J Fract 120:421–429CrossRef Scherban T, Pantuso D, Sun B et al (2003) Characterization of interconnect interfacial adhesion by cross-sectional nanoindentation. Int J Fract 120:421–429CrossRef
59.
go back to reference Heavens O (1950) Some factors influencing the adhesion of films produced by vacuum evaporation. J Phys Radium 11:355–360CrossRef Heavens O (1950) Some factors influencing the adhesion of films produced by vacuum evaporation. J Phys Radium 11:355–360CrossRef
60.
go back to reference Deng H, Scharf TW, Barnard JA (1997) Adhesion assessment of silicon carbide, carbon, and carbon nitride ultrathin overcoats by nanoscratch techniques. J Appl Phys 81:5396–5398CrossRef Deng H, Scharf TW, Barnard JA (1997) Adhesion assessment of silicon carbide, carbon, and carbon nitride ultrathin overcoats by nanoscratch techniques. J Appl Phys 81:5396–5398CrossRef
61.
go back to reference Wei C, Yen JY (2007) Effect of film thickness and interlayer on the adhesion strength of diamond like carbon films on different substrates. Diam Relat Mater 16:1325–1330CrossRef Wei C, Yen JY (2007) Effect of film thickness and interlayer on the adhesion strength of diamond like carbon films on different substrates. Diam Relat Mater 16:1325–1330CrossRef
62.
go back to reference Beake B, Harris A, Liskiewicz T (2013) Review of recent progress in nanoscratch testing. Tribol Mater Surf Interfaces 7:87–96CrossRef Beake B, Harris A, Liskiewicz T (2013) Review of recent progress in nanoscratch testing. Tribol Mater Surf Interfaces 7:87–96CrossRef
63.
go back to reference Gassilloud R, Ballif C, Gasser P et al (2005) Deformation mechanisms of silicon during nanoscratching. Phys Status Solidi 202:2858–2869CrossRef Gassilloud R, Ballif C, Gasser P et al (2005) Deformation mechanisms of silicon during nanoscratching. Phys Status Solidi 202:2858–2869CrossRef
64.
go back to reference Bakshi SR, Keshri AK, Agarwal A (2011) A comparison of mechanical and wear properties of plasma sprayed carbon nanotube reinforced aluminum composites at nano and macro scale. Mater Sci Eng A 528:3375–3384CrossRef Bakshi SR, Keshri AK, Agarwal A (2011) A comparison of mechanical and wear properties of plasma sprayed carbon nanotube reinforced aluminum composites at nano and macro scale. Mater Sci Eng A 528:3375–3384CrossRef
65.
go back to reference Lian D (2010) Effect of annealing on the nanoscratch behavior of multilayer Si0.8 Ge0.2/Si films. Appl Surf Sci 257:911–916CrossRef Lian D (2010) Effect of annealing on the nanoscratch behavior of multilayer Si0.8 Ge0.2/Si films. Appl Surf Sci 257:911–916CrossRef
66.
go back to reference Sun H, Irwan R, Huang H et al (2010) Surface characteristics and removal mechanism of cemented tungsten carbides in nanoscratching. Wear 268:1400–1408CrossRef Sun H, Irwan R, Huang H et al (2010) Surface characteristics and removal mechanism of cemented tungsten carbides in nanoscratching. Wear 268:1400–1408CrossRef
67.
go back to reference Larsson M, Olsson M, Hedenqvist P et al (2000) Mechanisms of coating failure as demonstrated by scratch and indentation testing of TiN coated HSS. Surf Eng 16:436–444CrossRef Larsson M, Olsson M, Hedenqvist P et al (2000) Mechanisms of coating failure as demonstrated by scratch and indentation testing of TiN coated HSS. Surf Eng 16:436–444CrossRef
68.
go back to reference Steinmann P, Tardy Y, Hintermann H (1987) Adhesion testing by the scratch test method: the influence of intrinsic and extrinsic parameters on the critical load. Thin Solid Films 154:333–349CrossRef Steinmann P, Tardy Y, Hintermann H (1987) Adhesion testing by the scratch test method: the influence of intrinsic and extrinsic parameters on the critical load. Thin Solid Films 154:333–349CrossRef
69.
go back to reference Bellido-Gonzalez V, Stefanopoulos N, Deguilhen F (1995) Friction monitored scratch adhesion testing. Surf Coat Technol 74:884–889CrossRef Bellido-Gonzalez V, Stefanopoulos N, Deguilhen F (1995) Friction monitored scratch adhesion testing. Surf Coat Technol 74:884–889CrossRef
70.
go back to reference Beuth J (1992) Cracking of thin bonded films in residual tension. Int J Solids Struct 29:1657–1675CrossRef Beuth J (1992) Cracking of thin bonded films in residual tension. Int J Solids Struct 29:1657–1675CrossRef
71.
go back to reference Ramsey P, Chandler H, Page T (1991) Bending tests to estimate the through-thickness strength and interfacial shear strength in coated systems. Thin Solid Films 201:81–89CrossRef Ramsey P, Chandler H, Page T (1991) Bending tests to estimate the through-thickness strength and interfacial shear strength in coated systems. Thin Solid Films 201:81–89CrossRef
72.
go back to reference Von Stebut J, Lapostolle F, Bucsa M et al (1999) Acoustic emission monitoring of single cracking events and associated damage mechanism analysis in indentation and scratch testing. Surf Coat Technol 116:160–171CrossRef Von Stebut J, Lapostolle F, Bucsa M et al (1999) Acoustic emission monitoring of single cracking events and associated damage mechanism analysis in indentation and scratch testing. Surf Coat Technol 116:160–171CrossRef
73.
go back to reference Tang W, Weng X, Deng L et al (2007) Nano-scratch experiments of Au/NiCr multi-layered films for microwave integrated circuits. Surf Coat Technol 201:5664–5666CrossRef Tang W, Weng X, Deng L et al (2007) Nano-scratch experiments of Au/NiCr multi-layered films for microwave integrated circuits. Surf Coat Technol 201:5664–5666CrossRef
74.
go back to reference Beake B, Davies M, Liskiewicz T et al (2013) Nano-scratch, nanoindentation and fretting tests of 5–80 nm Ta-C films on Si (100). Wear 301:575–582CrossRef Beake B, Davies M, Liskiewicz T et al (2013) Nano-scratch, nanoindentation and fretting tests of 5–80 nm Ta-C films on Si (100). Wear 301:575–582CrossRef
75.
go back to reference Beake B, Ogwu A, Wagner T (2006) Influence of experimental factors and film thickness on the measured critical load in the nanoscratch test. Mater Sci Eng A 423:70–73CrossRef Beake B, Ogwu A, Wagner T (2006) Influence of experimental factors and film thickness on the measured critical load in the nanoscratch test. Mater Sci Eng A 423:70–73CrossRef
76.
go back to reference Shi B, Sullivan JL, Beake BD (2008) An investigation into which factors control the nanotribological behaviour of thin sputtered carbon films. J Phys D Appl Phys 41:045303CrossRef Shi B, Sullivan JL, Beake BD (2008) An investigation into which factors control the nanotribological behaviour of thin sputtered carbon films. J Phys D Appl Phys 41:045303CrossRef
77.
go back to reference Li J, Beres W (2006) Three-dimensional finite element modelling of the scratch test for a TiN coated titanium alloy substrate. Wear 260:1232–1242CrossRef Li J, Beres W (2006) Three-dimensional finite element modelling of the scratch test for a TiN coated titanium alloy substrate. Wear 260:1232–1242CrossRef
78.
go back to reference Holmberg K, Laukkanen A, Ronkainen H et al (2003) A model for stresses, crack generation and fracture toughness calculation in scratched TiN-coated steel surfaces. Wear 254:278–291CrossRef Holmberg K, Laukkanen A, Ronkainen H et al (2003) A model for stresses, crack generation and fracture toughness calculation in scratched TiN-coated steel surfaces. Wear 254:278–291CrossRef
79.
go back to reference Kitamura T, Hirakata H, Itsuji T (2003) Effect of residual stress on delamination from interface edge between nano-films. Eng Fract Mech 70:2089–2101CrossRef Kitamura T, Hirakata H, Itsuji T (2003) Effect of residual stress on delamination from interface edge between nano-films. Eng Fract Mech 70:2089–2101CrossRef
80.
go back to reference Van Der Laan D, Ekin J, Clickner C et al (2007) Delamination strength of YBCO coated conductors under transverse tensile stress. Supercond Sci Technol 20:765–770CrossRef Van Der Laan D, Ekin J, Clickner C et al (2007) Delamination strength of YBCO coated conductors under transverse tensile stress. Supercond Sci Technol 20:765–770CrossRef
81.
go back to reference Sumitomo T, Huang H, Zhou L (2011) Multi-scale deformation and material removal in amorphous Si thin film solar panels. Int J Nanomanuf 7:39–53CrossRef Sumitomo T, Huang H, Zhou L (2011) Multi-scale deformation and material removal in amorphous Si thin film solar panels. Int J Nanomanuf 7:39–53CrossRef
82.
go back to reference Zhang C, Ohmori H, Marinescu I et al (2001) Grinding of ceramic coatings with cast iron bond diamond wheel. A comparative study: ELID and rotary dressers. Int J Adv Manuf Technol 18:545–552CrossRef Zhang C, Ohmori H, Marinescu I et al (2001) Grinding of ceramic coatings with cast iron bond diamond wheel. A comparative study: ELID and rotary dressers. Int J Adv Manuf Technol 18:545–552CrossRef
83.
go back to reference Murthy J, Rao D, Venkataraman B (2001) Effect of grinding on the erosion behaviour of a WC-Co-Cr coating deposited by HVOF and detonation gun spray processes. Wear 249:592–600CrossRef Murthy J, Rao D, Venkataraman B (2001) Effect of grinding on the erosion behaviour of a WC-Co-Cr coating deposited by HVOF and detonation gun spray processes. Wear 249:592–600CrossRef
84.
go back to reference Massad RB (1984) Diamond wheel grinding of thermal spray materials. Therm Spray Coat 139–146 Massad RB (1984) Diamond wheel grinding of thermal spray materials. Therm Spray Coat 139–146
85.
go back to reference Stephenson D, Hedge J, Corbett J (2002) Surface finishing of Ni-Cr-B-Si composite coatings by precision grinding. Int J Mach Tools Manuf 42:357–363CrossRef Stephenson D, Hedge J, Corbett J (2002) Surface finishing of Ni-Cr-B-Si composite coatings by precision grinding. Int J Mach Tools Manuf 42:357–363CrossRef
86.
go back to reference Liu X, Zhang B (2002) Effects of grinding process on residual stresses in nanostructured ceramic coatings. J Mater Sci 37:3229–3239CrossRef Liu X, Zhang B (2002) Effects of grinding process on residual stresses in nanostructured ceramic coatings. J Mater Sci 37:3229–3239CrossRef
87.
go back to reference Zhang B, Liu X, Brown C et al (2002) Microgrinding of nanostructured material coatings. CIRP Ann Manuf Technol 51:251–254CrossRef Zhang B, Liu X, Brown C et al (2002) Microgrinding of nanostructured material coatings. CIRP Ann Manuf Technol 51:251–254CrossRef
88.
go back to reference Liu X, Zhang B (2003) Grinding of nanostructural ceramic coatings: damage evaluation. Int J Mach Tools Manuf 43:161–167CrossRef Liu X, Zhang B (2003) Grinding of nanostructural ceramic coatings: damage evaluation. Int J Mach Tools Manuf 43:161–167CrossRef
89.
go back to reference Liu X, Zhang B, Deng Z (2002) Grinding of nanostructured ceramic coatings: surface observations and material removal mechanisms. Int J Mach Tools Manuf 42:1665–1676CrossRef Liu X, Zhang B, Deng Z (2002) Grinding of nanostructured ceramic coatings: surface observations and material removal mechanisms. Int J Mach Tools Manuf 42:1665–1676CrossRef
90.
go back to reference Bifano TG, Dow TA, Scattergood RO (1991) Ductile-regime grinding: a new technology for machining brittle materials. J Eng Ind 113:184–189CrossRef Bifano TG, Dow TA, Scattergood RO (1991) Ductile-regime grinding: a new technology for machining brittle materials. J Eng Ind 113:184–189CrossRef
91.
go back to reference Huang H, Liu Y (2003) Experimental investigations of machining characteristics and removal mechanisms of advanced ceramics in high speed deep grinding. Int J Mach Tools Manuf 43:811–823CrossRef Huang H, Liu Y (2003) Experimental investigations of machining characteristics and removal mechanisms of advanced ceramics in high speed deep grinding. Int J Mach Tools Manuf 43:811–823CrossRef
92.
go back to reference Jackson M, Davis C, Hitchiner M et al (2001) High-speed grinding with CBN grinding wheels—applications and future technology. J Mater Process Technol 110:78–88CrossRef Jackson M, Davis C, Hitchiner M et al (2001) High-speed grinding with CBN grinding wheels—applications and future technology. J Mater Process Technol 110:78–88CrossRef
93.
go back to reference Kang CW, Huang H. A comparative study of conventional and high speed grinding characteristics of a thin film multilayer structure. Precis Eng Kang CW, Huang H. A comparative study of conventional and high speed grinding characteristics of a thin film multilayer structure. Precis Eng
94.
go back to reference Needleman A (1972) A numerical study of necking in circular cylindrical bar. J Mech Phys Solids 20:111–127CrossRefMATH Needleman A (1972) A numerical study of necking in circular cylindrical bar. J Mech Phys Solids 20:111–127CrossRefMATH
95.
go back to reference Needleman A (1987) A continuum model for void nucleation by inclusion debonding. J Appl Mech 54:525–531CrossRefMATH Needleman A (1987) A continuum model for void nucleation by inclusion debonding. J Appl Mech 54:525–531CrossRefMATH
Metadata
Title
Deformation, failure and removal mechanisms of thin film structures in abrasive machining
Authors
Cheng-Wei Kang
Han Huang
Publication date
18-02-2017
Publisher
Shanghai University
Published in
Advances in Manufacturing / Issue 1/2017
Print ISSN: 2095-3127
Electronic ISSN: 2195-3597
DOI
https://doi.org/10.1007/s40436-016-0165-2

Other articles of this Issue 1/2017

Advances in Manufacturing 1/2017 Go to the issue

Premium Partners