Top

Published in:

2022 | OriginalPaper | Chapter

Design Catalogues as Knowledge-Base for CAD-Based Design Automation

Author : Paul Christoph Gembarski

Published in: Towards Sustainable Customization: Bridging Smart Products and Manufacturing Systems

Publisher: Springer International Publishing

Activate our intelligent search to find suitable subject content or patents.

search-config

AI-assisted search

Off

Abstract

Roth’s design catalogue was developed particularly as repository for engineering knowledge also for the early phases of the design process and as a methodological support for the designer. Design catalogues are not only a simple collection of known and proven solutions for design problems but allow for structuring and prioritizing solutions according to requirements and development goals. In the current article, a knowledge-based engineering environment is presented that combines a computer aided design catalogue and a case based reasoning system with geometric and analysis models. At the example of dust separators it is shown how Roth’s design catalogue is used to determine the most suitable separation technique and to access component configurators, e.g. for a cyclone separator.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

inform now

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

inform now

Springer Professional "Wirtschaft"

Online-Abonnement

Mit Springer Professional "Wirtschaft" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 340 Zeitschriften

aus folgenden Fachgebieten:

Bauwesen + Immobilien
Business IT + Informatik
Finance + Banking
Management + Führung
Marketing + Vertrieb
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

inform now

previous chapter Complexity Management in Engineer-To-Order Industry: A Design-Time Estimation Model for Engineering Processes

next chapter Implicit and Explicit Modeling of Uncertainty in Early Design Stages of Product Design: A Comparative Study

Pahl, G., Beitz, W., Feldhusen, J., Grote, K.-H.: Engineering Design - A Systematic Approach, 3rd edn. Springer, Heidelberg (2007). https://doi.org/10.1007/978-1-84628-319-2

Ullman, D.G.: The Mechanical Design Process. McGraw Hill, New York City (2009)

Roth, K.: Design Catalogues and Their Usage. Springer, Heidelberg (2002). https://doi.org/10.1007/978-1-4471-3717-7_8

Gembarski, P.C., Bibani, M., Lachmayer, R.: Design catalogues: knowledge repositories for knowledge-based-engineering applications. In: Marjanović, D., Štorga, M., Pavković, N., Bojčetić, N., Škec, S. (eds.) Proceedings of the DESIGN 2016 14th International Design Conference, pp. 2007–2016 (2016)

Winkelman, P.: A theoretical framework for an intelligent design catalogue. Eng. Comput. 27(2), 183–192 (2011). https://doi.org/10.1007/s00366-010-0188-4CrossRef

Brockmöller, T., Gembarski, P.C., Mozgova, I., Lachmayer, R.: Design catalogue in a CAE environment for the illustration of tailored forming. In: 59th Ilmenau Scientific Colloquium, Technische Universität Ilmenau (2017)

Weiss, F., Binz, H., Roth, D.: Conception of a design catalogue for the development of functionalities with additive manufacturing. In: Proceedings of NordDesign 2016, Trondheim, Norway (2016)

Franke, H.-J., Löffler, S., Deimel, M.: Increasing the efficiency of design catalogues by using modern data processing technologies. In: Proceedings of DESIGN 2004, the 8th International Design Conference, Dubrovnik, Croatia (2004)

Siqueira, R., Bibani, M., Duran, D., Mozgova, I., Lachmayer, R., Behrens, B.-A.: An adapted case-based reasoning system for design and manufacturing of tailored forming multi-material components. Int. J. Interact. Des. Manuf. (IJIDeM) 13(3), 1175–1184 (2019). https://doi.org/10.1007/s12008-019-00566-7CrossRef

10.

Richter, M.M., Weber, R.O.: Case-Based Reasoning. Springer, Heidelberg (2016). https://doi.org/10.1007/978-3-642-40167-1

11.

Verhagen, W.J.C., Bermell-Garcia, P., van Dijk, R.E.C., Curran, R.: A critical review of knowledge-based engineering: an identification of research challenges. Adv. Eng. Inform. 26(1), 5–15 (2012). https://doi.org/10.1016/j.aei.2011.06.004CrossRef

12.

Plappert, S., Gembarski, P.C., Lachmayer, R.: The use of knowledge-based engineering systems and artificial intelligence in product development: a snapshot. In: Świątek, J., Borzemski, L., Wilimowska, Z. (eds.) Information Systems Architecture and Technology: Proceedings of 40th Anniversary International Conference on Information Systems Architecture and Technology – ISAT 2019. Advances in Intelligent Systems and Computing, vol. 1051, pp. 62–73 (2019). https://doi.org/10.1007/978-3-030-30604-5_6

13.

Gembarski, P.C., Lachmayer, R.: Business models for customer co-design. In: Proceedings of the 7th International Conference on Mass Customization and Personalization in Central Europe (MCP-CE 2016), pp. 76–83. Faculty of technical sciences, Novi Sad (2016)

14.

Hopgood, A.A.: Intelligent Systems for Engineers and Scientists. Taylor & Francis, Milton Park (2016)CrossRef

15.

Chandrasegaran, S.K., et al.: The evolution, challenges, and future of knowledge representation in product design systems. Comput. Aided Des. 45(2), 204–228 (2013). https://doi.org/10.1016/j.cad.2012.08.006CrossRef

16.

Gembarski, P.C.: Three ways of integrating computer-aided design and knowledge-based engineering. In: DESIGN Conference, vol. 1, pp. 1255–1264 (2020). https://doi.org/10.1017/dsd.2020.313

17.

Löffler, F.: Staubabscheiden. Thieme, Stuttgart (1988)

18.

Peukert, W., Wadenpohl, C.: Industrial separation of fine particles with difficult dust properties. Powder Technol. 118(1–2), 136–148 (2001). https://doi.org/10.1016/S0032-5910(01)00304-7CrossRef

Title: Design Catalogues as Knowledge-Base for CAD-Based Design Automation
Author: Paul Christoph Gembarski
Publisher: Springer International Publishing
Book: Towards Sustainable Customization: Bridging Smart Products and Manufacturing Systems
Print ISBN: 978-3-030-90699-3

Electronic ISBN: 978-3-030-90700-6

Copyright Year: 2022
DOI: https://doi.org/10.1007/978-3-030-90700-6_73

Springer Professional

Abstract

Please log in to get access to your license.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Springer Professional "Wirtschaft"

Premium Partners