Top

Published in:

2024 | OriginalPaper | Chapter

Digital Processes for Wood Innovation Design

Authors : Fabio Bianconi, Marco Filippucci, Giulia Pelliccia

Published in: Architecture and Design for Industry 4.0

Publisher: Springer International Publishing

Activate our intelligent search to find suitable subject content or patents.

search-config

AI-assisted search

Off

Abstract

The study reports the outcomes of a research activity focused on digitization techniques and in particular on the value of computational design, with the aim of implementing innovative product and process solutions resulting from an integrated design approach. The digitization paths focused on representative strategies for digital optimization of the architectural form of wooden houses as a function of context, based on research on generative modelling and evolutionary algorithms for multi-objective optimization applied to the architecture of wooden houses. With such an approach, centered on artificial intelligence or at least on augmented computational intelligence, it was possible to achieve a process of mass customization of meta-planning solutions of wooden architectures, based on the morphological and energetic selection of the best configurations, identified according to the context. These results were made accessible through a web-based configurator that provides the designer with initial configurations from which starting the real project. The studies are projected to the definition of a prototype of the “breathing house,” characterized by its moisture-responsive wooden panels, with the identification of innovative solutions capable of reacting passively to changes in humidity according to the “natural intelligence” of the material, whose morphological transformation, empirically studied and digitally transcribed to identify performance solutions, generates well-being for living.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

inform now

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

inform now

Springer Professional "Wirtschaft"

Online-Abonnement

Mit Springer Professional "Wirtschaft" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 340 Zeitschriften

aus folgenden Fachgebieten:

Bauwesen + Immobilien
Business IT + Informatik
Finance + Banking
Management + Führung
Marketing + Vertrieb
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

inform now

previous chapter Virtual, Augmented and Mixed Reality as Communication and Verification Tools in a Digitized Design and File-To-Factory Process for Temporary Housing in CFS

next chapter Visual Programming for Robot Control: Technology Transfer Between AEC and Industry

Bianconi, F.: Segni Digitali. Morlacchi, Perugia (2005)

Bianconi, F., Filippucci, M.: Il disegno degli olivi tra forma e luce. Le potenzialità analitiche della rappresentazione parametrica nell’interdisciplinarità della ricerca. Drawing form and light of olive trees. The analytic potentiality of parametric representation into the interdisc, in Territori e frontiere della Rappresentazione/Territories and frontiers of Representation, UID, Ed. Roma: Gangemi Editore, pp. 439–450 (2017)

Filippucci, M., Rinchi, G., Brunori, A., Nasini, L., Regni, L., Proietti, P.: Architectural modelling of an olive tree. Generative tools for the scientific visualization of morphology and radiation relationships. Ecol. Inform. 36, 84–93 (2016). https://doi.org/10.1016/j.ecoinf.2016.09.004

Broy, M.: Cyber-Physical Systems Innovation durch Software-Intensive Eingebettet Systeme, Acatech Disk, pp. 1–141 (2010). http://www.acatech.de/de/publikationen/berichte-und-dokumentationen/acatech/detail/artikel/cyber-physical-systems-innovation-durch-softwareintensive-eingebetete-systeme.html%5Cn. https://doi.org/10.1007/978-3-642-14901-6

Bohn, R.E.: Measuring and managing technological knowledge. IEEE Eng. Manage. Rev. 25(4), 77–88 (1994). https://doi.org/10.1016/b978-0-7506-7009-8.50022-7CrossRef

Ackoff, R.L.: From data to wisdom. J. Appl. Syst. Anal. 16, 3–9 (1989)

Forbes: Customer Engagement: Best of the Best (2015). https://www.forbes.com/forbesinsights/sap_customer_engagement/index.html

Iansiti, M., Lakhani, K.L.: Digital Ubiquity: How Connections, Sensors, and Data Are Revolutionizing Business,CFA Dig.,vol. 45, no. 2 (2015)

Ackerman, E.: Fetch robotics introduces fetch and freight: your warehouse is now automated. IEEE Spectrum (2015). https://spectrum.ieee.org/automaton/robotics/industrial-robots/fetch-robotics-introduces-fetch-and-freight-your-warehouse-is-now-automated

10.

Conti, M., et al.: Looking ahead in pervasive computing: challenges and opportunities in the era of cyberphysical convergence. Pervasive Mob. Comput. 8(1), 2–21 (2012). https://doi.org/10.1016/j.pmcj.2011.10.001CrossRef

11.

Wang, S., Wan, J., Li, D., Zhang, C.: Implementing smart factory of industrie 4.0: an outlook. Int. J. Distrib. Sens. Netw. 12(1), 3159805 (2016). https://doi.org/10.1155/2016/3159805

12.

Hartmann, B., Narayanan, S., King, W.P.: Digital Manufacturing: The Revolution will be Virtualized. McKinsey&Company (2015)

13.

Kamarul Bahrin, M.A., Othman, M.F., Nor Azli, N.H., Talib, M.F.: Industry 4.0: a review on industrial automation and robotic. J. Teknol. 78(6–13) (2016). https://doi.org/10.11113/jt.v78.9285

14.

Bianconi, F., Filippucci, M., Buffi, A.: Automated design and modeling for mass-customized housing. A web-based design space catalog for timber structures. Autom. Constr. 103 (2019). https://doi.org/10.1016/j.autcon.2019.03.002

15.

Lenka, S., Parida, V., Rönnberg Sjödin, D., Wincent, J.: Digitalization and advanced service innovation : how digitalization capabilities enable companies to co-create value with customers. Manage. Innov. Technol. 3, 3–5 (2016)

16.

Lidong, W., Guanghui, W.: Big data in cyber-physical systems, digital manufacturing and industry 4.0. Int. J. Eng. Manuf. 6(4), 1–8 (2016). https://doi.org/10.5815/ijem.2016.04.01

17.

Oxman, R.: Theory and design in the first digital age. Des. Stud. 27(3), 229–265 (2006). https://doi.org/10.1016/J.DESTUD.2005.11.002CrossRef

18.

Oxman, R., Oxman, R.: The New Structuralism: Design, Engineering and Architectural Technologies. Wiley, New York (2010)

19.

Oxman, R., Oxman, R.: Introduction. In: The New Structuralism: Design, Engineering and Architectural Technologies, pp. 14–24. Wiley (2010)

20.

Filippucci, M., Bianconi, F., Andreani, S.: Computational design and built environments. In: Amoruso, G. (Ed.) 3D printing: breakthroughs in research and practice, pp. 361–395. IGI Global, Hershey (2018). https://doi.org/10.4018/978-1-5225-1677-4.ch019

21.

Schumacher, P.: The Autopoiesis of Architecture: A New Agenda for Architecture, vol. II. John Wiley & Sons, West Sessex (2012)

22.

Empler, T., Bianconi, F., Bagagli, R.: Rappresentazione del paesaggio : modelli virtuali per la progettazione ambientale e territoriale, vol. 1. DEI Tipografia del Genio Civile, Roma (2006)

23.

Granadeiro, V., Duarte, J.P., Correia, J.R., Leal, V.M.S.: Building envelope shape design in early stages of the design process: integrating architectural design systems and energy simulation. Autom. Constr. 32, 196–209 (2013). https://doi.org/10.1016/j.autcon.2012.12.003CrossRef

24.

Taylor, M.C.: The Moment of Complexity: Emerging Network Culture. University of Chicago Press, Chicago (2001)

25.

Brown, N., Mueller, C.: Designing with data: moving beyond the design space catalog. In: Acadia 2017 Discipline + Distruption, pp. 154–163 (2017)

26.

Mina, A.A., Braha, D., Bar-Yam, Y.: Complex engineered systems: a new paradigm. In: Complex Engineered Systems, pp. 1–21. Springer, Berlin, Heidelberg (2006). https://doi.org/10.1007/3-540-32834-3_1

27.

Bar-Yam, Y.: Complexity Rising: From Human Beings to Human Civilization, a Complexity Profile. Cambridge (1997)

28.

Bar-Yam, Y.: Multiscale variety in complex systems. Complexity 9(4), 37–45 (2004). https://doi.org/10.1002/cplx.20014MathSciNetCrossRef

29.

Kolarevic, B., Malkawi, A.: Peformative Architecture. Routledge, London (2005)CrossRef

30.

Aish, R., Woodbury, R.: Multi-level interaction in parametric design. In: Smart Graphics, pp. 151–162. Springer (2005). https://doi.org/10.1007/11536482_13

31.

Bergmann, E., Hildebrand, S.: Form-Finding, Form-Shaping, Designing Architecture. Mendrisio Academy Press, Mendrisio (2015)

32.

Self, M., Vercruysse, E.: Infinite variations, radical strategies. In: Fabricate 2017 Conference Proceedings, pp. 30–35 (2017)

33.

Scheurer, F.: Materialising complexity. Archit. Des. 80(4), 86–93 (2010). https://doi.org/10.1002/ad.1111CrossRef

34.

Pine, B.J., Slessor, C.: Mass Customization: The New Frontier in Business Competition. Harvard Business School, Boston (1999)

35.

Duray, R., Ward, P.T., Milligan, G.W., Berry, W.L.: Approaches to mass customization: configurations and empirical validation. J. Oper. Manage. 18(6), 605–625 (2000). https://doi.org/10.1016/S0272-6963(00)00043-7CrossRef

36.

Zipkin, P.: The limits of mass customization. MIT Sloan Manage. Rev. 42(3), 81–87 (2001). ISSN: 1532-9194

37.

Anderson, D.M.: Build-to-order and mass customization: the ultimate supply chain management and lean manufacturing strategy for low-cost on-demand production without forecasts or inventory. CIM Press, Cambria (2002)

38.

Dellaert, B.G.C., Stremersch, S.: Marketing mass-customized products: striking a balance between utility and complexity. J. Mark. Res. 42(2), 219–227 (2005). https://doi.org/10.1509/jmkr.42.2.219.62293CrossRef

39.

Salvador, F., De Holan, P.M., Piller, F.: Cracking the code of mass customization. MIT Sloan Manage. Rev. 50(3), 71–79 (2009)

40.

Willis, D., Woodward, T.: Diminishing difficulty: mass customisation and the digital production of architecture. In: Corser, R. (Ed.) Fabricating Architecture : Selected Readings in Digital Design and Manufacturing, pp. 184–208. Princeton Architectural Press (2010)

41.

Nahmens, I., Bindroo, V.: Is customization fruitful in industrialized homebuilding industry? J. Constr. Eng. Manage. 137(12), 1027–1035 (2011). https://doi.org/10.1061/(ASCE)CO.1943-7862.0000396CrossRef

42.

Knaack, U., Chung-Klatte, S., Hasselbach, R.: Prefabricated Systems : Principles of Construction. Birkhäuser, Basel (2012)

43.

Page, I.C., Norman, D.: Prefabrication and Standardisation Potential in Buildings (SR 312). Branz, Wellington (2014)

44.

Bianconi, F., Filippucci, M., Pelliccia, G.: Lineamenta. Maggioli, Santarcangelo di Romagna (RN) (2020)

45.

Alberti, L.B.: De re aedificatoria. Nicolai Laurentii Alamani, Firenze (1443)

46.

Rechenberg, I.: Evolurionsstratgie. Holzmann-Froboog, Stuttgart (1973)

47.

Mitchell, M.: An Introduction to Genetic Algorithms. MIT Press, Cambridge (1998)

48.

Fasoulaki, E.: Architecture: a necessity or a trend? In: 10th Generative Art International Conference (2007)

49.

Goel, A.K., McAdams, D.A., Stone, R.B.: Biologically Inspired Design. Springer, London (2014). https://doi.org/10.1007/978-1-4471-5248-4

50.

López, M., Rubio, R., Martín, S., Croxford, B.: How plants inspire façades. From plants to architecture: Biomimetic principles for the development of adaptive architectural envelopes. Renew. Sustain. Energy Rev. 67, 692–703 (2017). https://doi.org/10.1016/J.RSER.2016.09.018

51.

Vattam, S., Helms, M.E., Goel, A.K.: Biologically-Inspired Innovation in Engineering Design: A Cognitive Study. Atlanta (2007). http://hdl.handle.net/1853/14346

52.

Oxman, R.: Performative design: a performance-based model of digital architectural design. Environ. Plan. B Plan. Des. 36(6), 1026–1037 (2009). https://doi.org/10.1068/b34149CrossRef

53.

Barthel, R.: Natural forms-architectural forms. In: Nerdinger, W. (Ed.) Frei Otto Complete Works, pp. 16–32. Birkhäuser Architecture, Basel-Boston-Berlin (1967)

54.

Bhushan, B.: Biomimetics: lessons from nature—an overview. Philos. Trans. A. Math. Phys. Eng. Sci. 367(1893), 1445–1486 (2009). https://doi.org/10.1098/rsta.2009.0011

55.

Wester, T.: Nature teaching structures. Int. J. Sp. Struct. 17(2–3), 135–147 (2002). https://doi.org/10.1260/026635102320321789CrossRef

56.

Knippers, J., Speck, T.: Design and construction principles in nature and architecture. Bioinspir. Biomim. 7(1) (2012). https://doi.org/10.1088/1748-3182/7/1/015002

57.

Mattheck, C.: Design in Nature : Learning from Trees. Springer, Berlin Heidelberg (1998)CrossRef

58.

Mazzoleni, I.: Architecture Follows Nature: Biomimetic Principles for Innovative Design. CRC Press, New York (2013)CrossRef

59.

Pawlyn, M.: Biomimicry in Architecture. RIBA Publishing, London (2011)

60.

Vincent, J.: Biomimetic patterns in architectural design. Archit. Des. 79(6), 74–81 (2009). https://doi.org/10.1002/ad.982CrossRef

61.

Pearce, P.: Structure in Nature is a Strategy for Design. MIT Press, Cambridge (1979)

62.

Seccaroni, M., Pelliccia, G.: Customizable social wooden pavilions: a workflow for the energy, emergy and perception optimization in Perugia’s parks. In: Digital Wood Design. Innovative Techniques of Representation in Architectural Design, vol. 24, pp. 1045–1062. Springer (2019). https://doi.org/10.1007/978-3-030-03676-8_42

63.

Bianconi, F., Filippucci, M., Pelliccia, G., Buffi, A.: Data driven design per l’architettura in legno. Ricerche rappresentative di algoritmi evolutivi per l’ottimizzazione delle soluzioni multi-obiettivo. In: Atti del XIX Congresso Nazionale CIRIAF. Energia e sviluppo sostenibile, pp. 61–72 (2019)

64.

UNI EN ISO 13786:2018 Thermal performance of building components—Dynamic thermal characteristics—Calculation methods (2018)

65.

UNI EN ISO 13788:2013 Hygrothermal performance of building components and building elements—Internal surface temperature to avoid critical surface humidity and interstitial condensation—Calculation methods (2013)

66.

Wang, W., Zmeureanu, R., Rivard, H.: Applying multi-objective genetic algorithms in green building design optimization. Build. Environ. 40(11), 1512–1525 (2005). https://doi.org/10.1016/j.buildenv.2004.11.017CrossRef

67.

Wright, J.A., Loosemore, H.A., Farmani, R.: Optimization of building thermal design and control by multi-criterion genetic algorithm. Energy Build. 34(9), 959–972 (2002). https://doi.org/10.1016/S0378-7788(02)00071-3CrossRef

68.

Censor, Y.: Pareto optimality in multiobjective problems. Appl. Math. Optim. 4(1), 41–59 (1977). https://doi.org/10.1007/BF01442131

69.

Decreto Ministeriale 26/6/2009—Ministero dello Sviluppo Economico Linee guida nazionali per la certificazione energetica degli edifici (2009)

70.

Addington, M., Schodek, D.L.: Smart Materials and New Technologies: For the Architecture and Design Professions. Architectural, Oxford (2005)

71.

Loonen, R.C.G.M., Trčka, M., Cóstola, D., Hensen, J.L.M.: Climate adaptive building shells: state-of-the-art and future challenges. Renew. Sustain. Energy Rev. 25, 483–493 (2013). https://doi.org/10.1016/J.RSER.2013.04.016CrossRef

72.

Ugolev, B.N.: Wood as a natural smart material. Wood Sci. Technol. 48(3), 553–568 (2014). https://doi.org/10.1007/s00226-013-0611-2CrossRef

73.

Holstov, A., Bridgens, B., Farmer, G.: Hygromorphic materials for sustainable responsive architecture. Constr. Build. Mater. 98, 570–582 (2015). https://doi.org/10.1016/J.CONBUILDMAT.2015.08.136CrossRef

74.

Reichert, S., Menges, A., Correa, D.: Meteorosensitive architecture: biomimetic building skins based on materially embedded and hygroscopically enabled responsiveness. Comput. Des. 60, 50–69 (2015). https://doi.org/10.1016/J.CAD.2014.02.010CrossRef

75.

Burgert, I., Fratzl, P.: Actuation systems in plants as prototypes for bioinspired devices. Philos. Trans. A Math. Phys. Eng. Sci. 367(1893), 1541–1557 (2009). https://doi.org/10.1098/rsta.2009.0003

76.

Reyssat, E., Mahadevan, L.: Hygromorphs: from pine cones to biomimetic bilayers. J. R. Soc. Interface 6(39), 951–957 (2009). https://doi.org/10.1098/rsif.2009.0184

77.

Song, K., et al.: Journey of water in pine cones. Sci. Rep. 5(1), 9963 (2015). https://doi.org/10.1038/srep09963MathSciNetCrossRef

78.

Dawson, C., Vincent, J.F.V., Rocca, A.-M.: How pine cones open. Nature 390(6661), 668 (1997). https://doi.org/10.1038/37745CrossRef

79.

Rüggeberg, M., Burgert, I.: Bio-inspired wooden actuators for large scale applications. PLoS ONE 10(4), e0120718 (2015). https://doi.org/10.1371/journal.pone.0120718CrossRef

80.

Vailati, C., Bachtiar, E., Hass, P., Burgert, I., Rüggeberg, M.: An autonomous shading system based on coupled wood bilayer elements. Energy Build. 158, 1013–1022 (2018). https://doi.org/10.1016/J.ENBUILD.2017.10.042CrossRef

81.

El-Dabaa, R., Salem, I.: 4D printing of wooden actuators: encoding FDM wooden filaments for architectural responsive skins. Open House Int. (2021). https://doi.org/10.1108/OHI-02-2021-0028CrossRef

82.

Correa, D., et al.: 4D pine scale: biomimetic 4D printed autonomous scale and flap structures capable of multi-phase movement. Philos. Trans. R. Soc. A Math. Phys. Eng. Sci. 378(2167) (2020). https://doi.org/10.1098/rsta.2019.0445

83.

Sydney Gladman, A., Matsumoto, E.A., Nuzzo, R.G., Mahadevan, L., Lewis, J.A.: Biomimetic 4D printing. Nat. Mater. 154(4), 413–418 (2016). https://doi.org/10.1038/nmat4544

84.

Le Duigou, A., Castro, M., Bevan, R., Martin, N.: 3D printing of wood fibre biocomposites: From mechanical to actuation functionality. Mater. Des. 96, 106–114 (2016). https://doi.org/10.1016/j.matdes.2016.02.018CrossRef

85.

ISO 9869-1:2014 Thermal insulation—Building elements—In-situ measurement of thermal resistance and thermal transmittance—Part 1: Heat flow meter method (2014)

86.

Bianconi, F., Filippucci, M., Pelliccia, G.: Wood and generative algorithms for the comparison between models and reality. Int. Arch. Photogramm. Remote Sens. Spat. Inf. Sci. XLIII-B4-2, 409–415 (2021). https://doi.org/10.5194/isprs-archives-XLIII-B4-2021-409-2021

87.

Tsigkari, M., Angelos, C., Joyce, S.C., Davis, A., Feng, S., Aish, F.: Integrated design in the simulation process. Society for Computer Simulation International, San Diego (2013)

88.

Kolarevic, B.: From mass customisation to design “Democratisation’’. Archit. Des. 85(6), 48–53 (2015). https://doi.org/10.1002/ad.1976CrossRef

89.

Weber, S.: The Success of Open Source. Harvard University Press, Cambridge (2005)CrossRef

90.

Ratti, C., Claudel, M.: Open Source Architecture. Thames & Hudson, New York (2015)

91.

Rajanen, M., Iivari, N.: Power, empowerment and open source usability. In: Proceedings of 33rd Annual ACM Conference on Human Factors Computing Systems—CHI ’15, pp. 3413–3422 (2015). https://doi.org/10.1145/2702123.2702441

92.

Lawrence, T.T.: Chassis+Infill: A Consumer-Driven, Open Source Building Approach for Adaptable, Mass Customized Housing. Massachusetts Institute of Technology (2003)

93.

Bianconi, F., Filippucci, M., Cornacchini, F.: Play and transform the city. Sciresit.it 2, 141–158 (2020). https://doi.org/10.2423/i22394303v10n2p141

94.

Larson, K.: Serious games and gamification in the corporate training environment: a literature review. TechTrends 64(2), 319–328 (2020). https://doi.org/10.1007/s11528-019-00446-7

95.

Smith, J., Sears, N., Taylor, B., Johnson, M.: Serious games for serious crises: reflections from an infectious disease outbreak matrix game. Global Health 16(1) (2020). https://doi.org/10.1186/s12992-020-00547-6

96.

Alvaro Marcos Antonio de Araujo Pistono, R.J.V.B., Santos, A.M.P.: Serious games: review of methodologies and games engines for their development. IEEE Xplore (2021). https://ieeexplore.ieee.org/abstract/document/9140827/. Accessed 28 Jun 2021

97.

Altıntop, Ç.G., Latifoğlu, F., Akın, A.K., İleri, R., Yazar, M.A.: Analysis of consciousness level using galvanic skin response during therapeutic effect. J. Med. Syst. 45(1) (2021). https://doi.org/10.1007/s10916-020-01677-5

98.

Sanchez-Comas, A., Synnes, K., Molina-Estren, D., Troncoso-Palacio, A., Comas-González, Z.: Correlation analysis of different measurement places of galvanic skin response in test groups facing pleasant and unpleasant stimuli. Sensors 21(12) (2021). https://doi.org/10.3390/s21124210

99.

Iadarola, G., Poli, A., Spinsante, S.: Analysis of galvanic skin response to acoustic stimuli by wearable devices. In: 2021 IEEE International Symposium on Medical Measurements and Applications, MeMeA 2021—Conference Proceedings (2021). https://doi.org/10.1109/MeMeA52024.2021.9478673

100.

Chen, F., Marcus, N., Khawaji, A., Zhou, J.: Using galvanic skin response (GSR) to measure trust and cognitive load in the text-chat environment. In: Conference on Human Factors in Computing Systems—Proceedings, April 2015, vol. 18, pp. 1989–1994. https://doi.org/10.1145/2702613.2732766

101.

Davis, J., Edgar, T., Porter, J., Bernaden, J., Sarli, M.: Smart manufacturing, manufacturing intelligence and demand-dynamic performance. Comput. Chem. Eng. 47, 145–156 (2012). https://doi.org/10.1016/J.COMPCHEMENG.2012.06.037CrossRef

102.

McGee, W., Ponce de León, M. (Eds.): Robotic Fabrication in Architecture, Art and Design 2014. Springer Science & Business Media, Cham (2014)

103.

Li, H., et al.: Integrating design and construction through virtual prototyping. Autom. Constr. 17(8), 915–922 (2008). https://doi.org/10.1016/J.AUTCON.2008.02.016CrossRef

104.

Eastman, C., Lee, J., Jeong, Y., Lee, J.: Automatic rule-based checking of building designs. Autom. Constr. 18(8), 1011–1033 (2009). https://doi.org/10.1016/J.AUTCON.2009.07.002CrossRef

105.

Popov, V., Juocevicius, V., Migilinskas, D., Ustinovichius, L., Mikalauskas, S.: The use of a virtual building design and construction model for developing an effective project concept in 5D environment. Autom. Constr. 19(3), 357–367 (2010). https://doi.org/10.1016/J.AUTCON.2009.12.005CrossRef

106.

Gramazio, F., Kohler, M.: Made by Robots : Challenging Architecture at the Large Scale AD. John Wiley & Sons, London (2014)

107.

Dangel, U.: Turning Point in Timber Construction : A New Economy. Birkhäuser, Basilea (2016)

108.

Gramazio, F., Kohler, N., Oesterle, S.: Encoding material. In: Oxman, R., Oxman, R. (Eds.) The New Structuralism : Design, Engineering and Architectural Technologies, pp. 108–115. Wiley (2010). https://books.google.it/books?id=035HAQAAIAAJ&q=The+new+Structuralism:+Design,+Engineering+and+Architectural+Technologies+AD&dq=The+new+Structuralism:+Design,+Engineering+and+Architectural+Technologies+AD&hl=it&sa=X&ved=0ahUKEwjirozclondAhVMkiwKHQFfBbEQ6A

109.

Menges, A., Schwinn, T., Krieg, O.D. (eds.): Advancing Wood Architecture. Routledge, London (2017)

110.

Kaufmann, H., Nerdinger, W. (eds.): Building with Timber: Paths into the Future. Prestel Verlag, Munich (2011)

111.

Weinand, Y.: Advanced Timber Structures : Architectural Designs and Digital Dimensioning. Birkhäuser, Basel (2016)

112.

Chilton, J.C., Tang, G.: Timber Gridshells: Architecture, Structure and Craft. Routledge, London (2016)CrossRef

113.

Vierlinger, R.: Towards AI drawing agents. In: Ramsgaard Thomsen, M., Tamke, M., Gengnagel Christoph Faircloth, B.S.F. (Eds.) Modelling Behaviour, pp. 357–369. Springer International Publishing, Cham (2015). https://doi.org/10.1007/978-3-319-24208-8_30

114.

Willmann, J., Gramazio, F., Kohler, M.: New paradigms of the automatic: robotic timber construction in architecture. In: Menges, A., Schwinn, T., Krieg, O.D. (Eds.) Advancing Wood Architecture. A Computational Approach, pp. 13–28. Routledge, London (2017). https://doi.org/10.4324/9781315678825-11

Title: Digital Processes for Wood Innovation Design
Authors: Fabio Bianconi
Marco Filippucci
Giulia Pelliccia
Publisher: Springer International Publishing
Book: Architecture and Design for Industry 4.0
Print ISBN: 978-3-031-36921-6

Electronic ISBN: 978-3-031-36922-3

Copyright Year: 2024
DOI: https://doi.org/10.1007/978-3-031-36922-3_25

Springer Professional

Abstract

Please log in to get access to your license.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Springer Professional "Wirtschaft"