Top

Published in:

25-11-2023

Effect of Cell Geometry and Heat Treatment on the Energy Absorption Property of AlSi10Mg Alloy Lattice Structures Produced by Laser-Based Powder Bed Fusion

Authors: Hyo Moon Joo, Woo Chul Kim, Youn Il Jung, Han Jae Kim, Seong Jin Kim, Yeong Cheol Jo, Wang Hyun Yong, Do Hyang Kim

Published in: Metals and Materials International | Issue 5/2024

Activate our intelligent search to find suitable subject content or patents.

search-config

AI-assisted search

Off

Abstract

In the present study, microstructural characteristics, compression behavior and energy absorption property of AlSi10Mg Octet Truss, FCC and Tetra lattice structures with volume fraction of 30%, 50%, and 70% produced using Laser-based powder bed fusion (L-PBF) method have been investigated. Proper selection of processing parameters for L-PBF enables high internal and surface quality even though node and strut in the lattice structure are very thin. AlSi10Mg lattice structure consists of a cellular structure composed of α-Al and intercellular eutectic Si. With heat treatment, needle shape Mg₂Si precipitates in the α-Al matrix. Octet Truss, FCC and Tetra lattice structures show similar compression fracture behavior. The maximum fracture forces for Octet Truss, FCC and Tetra lattice structures (70% volume fraction) are 22.0 kN, 23.7 kN and 23.7 kN, respectively, while the energy absorption values up to 8 mm displacement are 128.1 J, 126.0 J and 88.9 J, respectively. With heat treatment, the maximum fracture force and the absorbed energy decreased when compared to those in as-built condition. When considering application of AlSi10Mg alloy lattice structure in shock absorbing part, FCC lattice structure with 70% volume fraction exhibits the most optimum combination of mechanical property and shock absorption characteristics.

Graphical Abstract

previous article Effects of Si Addition on the Martensitic Transformation, Structural and Thermodynamic Aspects in Fe45−xMn30Cr10Co15Six High Entropy Alloys

next article Microstructure and Properties of the LDEDed Cu-Bearing Martensitic Stainless Steel After a Single-Step Tempering Treatment

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

inform now

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

inform now

Available only for authorised users

A. du Plessis, S.M.J. Razavi, M. Benedetti, S. Murchio, M. Leary, M. Watson, D. Bhate, F. Berto, Prog. Mater. Sci. 125, 100918 (2022). https://doi.org/10.1016/j.pmatsci.2021.100918CrossRef

T. Maconachie, M. Leary, B. Lozanovski, X. Zhang, M. Qian, O. Faruque, M. Brandt, Mater. Des. 183, 108137 (2019). https://doi.org/10.1016/j.matdes.2019.108137CrossRef

M. Liu, N. Takata, A. Suzuki, M. Kobashi, J. mater. sci. technol. 36, 106–117 (2020). https://doi.org/10.1016/j.jmst.2019.06.015CrossRef

Z. Dong, Y. Liu, Q. Zhang, J. Ge, S. Ji, W. Li, J. Liang, J. Alloys Compd. 833, 155071 (2020). https://doi.org/10.1016/j.jallcom.2020.155071CrossRef

M. Leary, M. Mazur, J. Elambasseril, M. McMillan, T. Chirent, Y. Sun, M. Qian, M. Easton, M. Brandt, Mater. Des. 98, 344–357 (2016). https://doi.org/10.1016/j.matdes.2016.02.127CrossRef

X. Cai, C. Pan, J. Wang, W. Zhang, Z. Fan, Y. Gao, P. Xu, H. Sun, J. Li, W. Yang, J. Alloys Compd. 897, 162933 (2022). https://doi.org/10.1016/j.jallcom.2021.162933CrossRef

D. Li, R. Qin, B. Chen, J. Zhou, Mater. Sci. Eng. A 822, 141666 (2021). https://doi.org/10.1016/j.msea.2021.141666CrossRef

M. Leary, M. Mazur, H. Williams, E. Yang, A. Alghamdi, B. Lozanovski, X. Zhang, D. Shidid, L. Farahbod-Sternahl, G. Witt, I. Kelbassa, P. Choong, M. Qian, M. Brandt, Mater. Des. 157, 179–199 (2018). https://doi.org/10.1016/j.matdes.2018.06.010CrossRef

X. Guo, J. Ding, X. Li, S. Qu, X. Song, J.Y.H. Fuh, W.F. Lu, W. Zhai, Int. J. Mech. Sci. 216, 106977 (2022). https://doi.org/10.1016/j.ijmecsci.2021.106977CrossRef

10.

D. Li, R. Qin, J. Xu, B. Chen, X. Niu, Mater Charact 187, 111882 (2022). https://doi.org/10.1016/j.matchar.2022.111882CrossRef

11.

T. DebRoy, H.L. Wei, J.S. Zuback, T. Mukherjee, J.W. Elmer, J.O. Milewski, A.M. Beese, A. Wilson-Heid, A. De, W. Zhang, Prog. Mater. Sci. 92, 112–224 (2018). https://doi.org/10.1016/j.pmatsci.2017.10.001CrossRef

12.

C. Yan, L. Hao, A. Hussein, S.L. Bubb, P. Young, D. Raymont, J. Mater. Process. Technol. 214(4), 856–864 (2014). https://doi.org/10.1016/j.jmatprotec.2013.12.004CrossRef

13.

A. Tamer Erturk, M. Enes Bulduk, G. Trakci, G. Ozer, E. Yarar, Met. Mater. Int. 28, 155–167 (2022). https://doi.org/10.1007/s12540-021-01038-yCrossRef

14.

P. Li, Y.E. Ma, W. Sun, X. Qian, W. Zhang, Z. Wang, Eng. Fract. Mech. 244, 107537 (2021). https://doi.org/10.1016/j.engfracmech.2021.107537CrossRef

15.

S. Gangireddy, M. Komarasamy, E.J. Faierson, R.S. Mishra, Mater. Sci. Eng. A 745, 231–239 (2019). https://doi.org/10.1016/j.msea.2018.12.101CrossRef

16.

J. Ge, J. Huang, Y. Lei, P. O’Reilly, M. Ahmed, C. Zhang, X. Yan, S. Yin, Surf. Coat. 403, 126419 (2020). https://doi.org/10.1016/j.surfcoat.2020.126419CrossRef

17.

M.G. Isaenkova, A.V. Yudin, A.E. Rubanov, A.V. Osintsev, L.A. Degadnikova, J. Mater. Res. Technol. 9(6), 15177–15184 (2020). https://doi.org/10.1016/j.jmrt.2020.10.089CrossRef

18.

P. Köhnen, C. Haase, J. Bültmann, S. Ziegler, J.H. Schleifenbaum, W. Bleck, Mater. Des. 145, 205–217 (2018). https://doi.org/10.1016/j.matdes.2018.02.062CrossRef

19.

T. Zhong, K. He, H. Li, L. Yang, Mater. Des. 181, 108076 (2019). https://doi.org/10.1016/j.matdes.2019.108076CrossRef

20.

S.Y. Ahn, J. Moon, Y.T. Choi, E.S. Kim, S.G. Jeong, J.M. Park, M. Kang, H. Joo, H.S. Kim, Mater. Sci. Eng. A 844, 143164 (2022). https://doi.org/10.1016/j.msea.2022.143164CrossRef

21.

H. Zhang, Y. Wang, J.J. Wang, D.R. Ni, D. Wang, B.L. Xiao, Z.Y. Ma, J. mater. sci. technol. 108, 226–235 (2022). https://doi.org/10.1016/j.jmst.2021.07.059CrossRef

22.

X. Liu, C. Zhao, X. Zhou, Z. Shen, W. Liu, Mater. Des. 168, 107677 (2019). https://doi.org/10.1016/j.matdes.2019.107677CrossRef

23.

N.T. Aboulkhair, M. Simonelli, L. Parry, I. Ashcroft, C. Tuck, R. Hague, Prog. Mater. Sci. 106, 100578 (2019). https://doi.org/10.1016/j.pmatsci.2019.100578CrossRef

24.

Z. Jiang, Y. Li, H. Luo, B. Zhou, Y. Liang, Y. Liang, Met. Mater. Int. 28, 2934–2946 (2022). https://doi.org/10.1007/s12540-022-01199-4CrossRef

25.

J.H. Martin, B.D. Yahata, J.M. Hundley, J.A. Mayer, T.A. Schaedler, T.M. Pollock, Nature 549(7672), 365–369 (2017). https://doi.org/10.1038/nature23894CrossRefPubMed

26.

J. Choe, K.T. Kim, J.H. Yu, J.M. Park, D.Y. Yang, S.H. Jung, S. Jo, H. Joo, M. Kang, S.Y. Ahn, S.G. Jeong, E.S. Kim, H. Lee, H.S. Kim, Addit. Manuf. 62, 103370 (2023). https://doi.org/10.1016/j.addma.2022.103370CrossRef

27.

J. Zhao, L. Luo, X. Xue, T. Liu, L. Luo, B. Wang, Y. Wang, L. Wang, Y. Su, J. Guo, H. Fu, Mater. Sci. Eng. A 824, 141863 (2021). https://doi.org/10.1016/j.msea.2021.141863CrossRef

28.

H. Zhang, D. Gu, D. Dai, C. Ma, Y. Li, M. Cao, S. Li, Appl. Surf. Sci. 509, 145330 (2020). https://doi.org/10.1016/j.apsusc.2020.145330CrossRef

29.

H. Tang, Y. Geng, J. Luo, J. Xu, H. Ju, L. Yu, Met. Mater. Int. 27, 2592–2599 (2021). https://doi.org/10.1007/s12540-020-00907-2CrossRef

30.

J. Yu, Y. Geng, Z. Zhang, H. Ju, Met. Mater. Int. 29, 3235–3248 (2023). https://doi.org/10.1007/s12540-023-01449-zCrossRef

31.

U. Patakham, A. Palasay, P. Wila, R. Tongsri, Mater. Sci. Eng. A 821, 141602 (2021). https://doi.org/10.1016/j.msea.2021.141602CrossRef

32.

M. Albu, R. Krisper, J. Lammer, G. Kothleitner, J. Fiocchi, P. Bassani, Addit. Manuf. 36, 101605 (2020). https://doi.org/10.1016/j.addma.2020.101605CrossRef

33.

Y.S. Eom, J.M. Park, J.W. Choi, D.J. Seong, H. Joo, Y.C. Jo, K.T. Kim, J.H. Yu, I. Son, J. Alloys Compd. 956, 170348 (2023). https://doi.org/10.1016/j.jallcom.2023.170348CrossRef

34.

N. Tabatabaei, A. Zarei-Hanzaki, A. Moshiri, H.R. Abedi, J. Mater. Res. Technol. 23, 6039–6053 (2023). https://doi.org/10.1016/j.jmrt.2023.02.086CrossRef

35.

N. Limbasiya, A. Jain, H. Soni, G. Krolczyk, P. Sahlot, J. Mater. Res. Technol. 21, 1141–1176 (2022). https://doi.org/10.1016/j.jmrt.2022.09.092CrossRef

36.

N. Read, W. Wang, K. Essa, M.M. Attallah, Mater. Des. 1980–2015(65), 417–424 (2015). https://doi.org/10.1016/j.matdes.2014.09.044CrossRef

37.

R.F. Fernandes, J.S. Jesus, R. Branco, L.P. Borrego, J.D. Costa, J.A.M. Ferreira, Int. J. Fatigue 164, 107157 (2022). https://doi.org/10.1016/j.ijfatigue.2022.107157CrossRef

38.

R.E. Gite, V.D. Wakchaure, Mater. Today Proc. 72, 966–986 (2023). https://doi.org/10.1016/j.matpr.2022.09.100CrossRef

Title: Effect of Cell Geometry and Heat Treatment on the Energy Absorption Property of AlSi10Mg Alloy Lattice Structures Produced by Laser-Based Powder Bed Fusion
Authors: Hyo Moon Joo
Woo Chul Kim
Youn Il Jung
Han Jae Kim
Seong Jin Kim
Yeong Cheol Jo
Wang Hyun Yong
Do Hyang Kim
Publication date: 25-11-2023
Publisher: The Korean Institute of Metals and Materials
Published in: Metals and Materials International / Issue 5/2024
Print ISSN: 1598-9623
Electronic ISSN: 2005-4149
DOI: https://doi.org/10.1007/s12540-023-01567-8

Springer Professional

Abstract

Graphical Abstract

Please log in to get access to your license.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Other articles of this Issue 5/2024

Effects of the Rolling Temperature on the Microstructure Uniformities and Mechanical Properties of Large 2219 Al–Cu Alloy Rings

Fabrication and Characterization of Wire Arc Additively Manufactured Ferritic-Austenitic Bimetallic Structure

Analysis of a Full-Scale Bi–Sn Liquid Metal Model for the Continuous Casting of Steel

Repetitive Nanosecond Laser-Induced Oxidation and Phase Transformation in NiTi Alloy

Effects of Si Addition on the Martensitic Transformation, Structural and Thermodynamic Aspects in Fe45−xMn30Cr10Co15Six High Entropy Alloys

Microstructure and Crystallographic Texture Evolution of β-Solidifying γ-TiAl Alloy During Single- and Multi-track Exposure via Laser Powder Bed Fusion