Top

Metal Science and Heat Treatment

Published in:

01-08-2016

Effect of Modes of Homogenization of Ingots on the Microstructure, Phase Composition and Mechanical Properties of Alloy 01570 at Elevated Temperatures

Authors: P. L. Reznik, O. A. Chikova, B. V. Ovsyannikov

Published in: Metal Science and Heat Treatment | Issue 3-4/2016

Activate our intelligent search to find suitable subject content or patents.

search-config

AI-assisted search

Off

Abstract

The effect of heat treatment of aluminum alloy 01570 on the microstructure, phase composition and mechanical properties of an ingot at elevated temperatures is studied. An optimum mode of heat treatment raising the strength properties of alloy 01570 at good ductility in the range of elevated temperatures is suggested.

previous article Theoretical and Experimental Study of the Al – Cu – Si – Sn Phase Diagram in the Range of Aluminum Alloys

next article Possibilities of Scanning and Transmission Electron Microscopy for Comparative Analysis of the Microstructure of In-Situ Nanocomposite High-Strength Conductors Based on a Copper Matrix and BCC-Metals

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

inform now

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

inform now

V. I. Elagin, “Ways to advance high-strength refractory structural aluminum alloys in the XXI century,” Metalloved. Term. Obrab. Met., No. 9, 3 – 11 (2007).

V. V. Zakharov and T. D. Rostova, “Effect of scandium, transition metals and impurities on hardening of aluminum alloys under decomposition of solid solution,” Metalloved. Term. Obrab. Met., No. 9, 12 – 19 (2007).

R. Z. Valiev and I. V. Aleksandrov, Bulk Nanostructured Metallic Materials: Fabrication, Structure and Properties [in Russian], IKTz “Akademkniga,” Moscow (2007),398 p.

N. A. Belov, Phase Composition of Commercial and Perspective Aluminum Alloys [in Russian], MISiS, Moscow (2010),511 p.

Gao Ying-jun, Ban Dong-mei, Han Yong-jian, et al., “Atomic bonding and mechanical properties of Al – Mg – Zr – Sc alloy,” Trans. Nonferr. Met. Soc. China, 14(5), 922 – 927 (2004).

C. B. Fuller, D. N. Seidman, D. C. Dunand, “Mechanical properties of Al(Sc, Zr) alloys at ambient and elevated temperatures,” Acta Mater., 51, 4803 – 4814 (2003).CrossRef

J. E. Hatch (ed.), Aluminum: Properties and Physical Metallurgy [Russian translation], Metallurgiya, Moscow (1989), 422 p.

V. S. Zolotarevskii and N. A. Belov, The Physical Metallurgy of Castable Aluminum Alloys [in Russian], MISiS, Moscow (2005), 376 p.

V. D. Belov and V. A. Semenov, “Effect of magnesium and casting temperature on the structure, mechanical and casting properties of an alloy of the Al – Mg system,” Izv. Vysh. Uchebn. Zaved., Tsvetn. Met., No. 2, 41 (2004).

10.

V. N. Perevezentsev, M. Yu. Shcherban’, M. Yu. Murashev, and R. Z. Valiev, “High-rate superplasticity of nanocrystalline aluminum alloy 1570,” Pis’ma Zh. Teor. Fiz., 33(15), 40 – 46 (2007).

11.

W. Ozgowicz, E. Kalinowska-Ozgowicz, A. Kowalski, and K. Golombek, “The structure and mechanical properties of Al – Mg – Mn alloys shaped in the process of thermomechanical treatment,” J. Achiev. Mater. Manuf. Eng., 45(2), 148 – 156 (2011).

12.

V. Radmilovic, A. Tolley, Z. Lee, and U. Dahmen, “Core-shell structures and precipitation kinetics of Al₃(Sc, Zr)Li₂ intermetallic phase in Al-rich alloy,” Metallurgija – J. Metall., 12(4), 309 – 314 (2006).

Title: Effect of Modes of Homogenization of Ingots on the Microstructure, Phase Composition and Mechanical Properties of Alloy 01570 at Elevated Temperatures
Authors: P. L. Reznik
O. A. Chikova
B. V. Ovsyannikov
Publication date: 01-08-2016
Publisher: Springer US
Published in: Metal Science and Heat Treatment / Issue 3-4/2016
Print ISSN: 0026-0673
Electronic ISSN: 1573-8973
DOI: https://doi.org/10.1007/s11041-016-9989-4

Springer Professional

Abstract

Please log in to get access to your license.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Other articles of this Issue 3-4/2016

End-Quenching Test as a Means for Assessing the Hardenability of Cast Iron

A Study of the Microstructure and Mechanical Properties of Medium-Carbon Steel 40KhGNM After Warm Swaging

Possibilities of Scanning and Transmission Electron Microscopy for Comparative Analysis of the Microstructure of In-Situ Nanocomposite High-Strength Conductors Based on a Copper Matrix and BCC-Metals

Effect of Aging on the Microstructure and Mechanical Properties of Magnesium Alloy AZ31

Simulation of the Elastoplastic Behavior of Grade-4 Ti in the ECAP-C Process

Effect of Rolling on High-Cycle Fatigue and Fracture of an Al – Mg – Sc Alloy

Premium Partners