Top

Polymer Bulletin

Published in:

31-12-2016 | Original Paper

Effect of nanoclay on carbon black reinforced blend of amorphous–semicrystalline polymers

Authors: Pankaj Sharma, Vinay Panwar, Alexander P. Kharitonov, Kaushik Pal

Published in: Polymer Bulletin | Issue 8/2017

Activate our intelligent search to find suitable subject content or patents.

search-config

AI-assisted search

Off

Abstract

In this work, the effect of nanoclay in carbon black reinforced PC-PBT has been investigated on the basis of changes in their mechanical and thermal properties. It has been believed on the basis of FESEM images that CB supports for the expansion of PBT rods and PC wraps around these expanded rods. However, the effect of reinforcing filler for improvement in mechanical properties has been found insignificant which may be due to the agglomeration of reinforcing particles. Addition of nanoclay in carbon black reinforced PC-PBT composite blend shown considerable improvement in its tensile strength (113%). This should be due to the improved dispersion of CB in polymer matrix and better linked-up structure of PBT rods after addition of NC. In addition, this combination has shown simultaneous improvement in tensile strength and ductility which is unusual and may be desirable in many structural applications.

previous article Thermal stability and thermal degradation kinetics of bio-based epoxy resins derived from cardanol by thermogravimetric analysis

next article Synthesis, characterization, and fertilizer release study of the salt and pH-sensitive NaAlg-g-poly(AA-co-AAm)/RHA superabsorbent nanocomposite

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

inform now

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

inform now

Available only for authorised users

Giannelis EM (1998) Polymer-layered silicate nanocomposites: synthesis, properties and applications. Appl Organomet Chem 12:675–680CrossRef

Zhao X, Lv L, Bingcai P, Zhang W, Zhang S, Zhang Q (2011) Polymer-supported nanocomposites for environmental application: a review. Chem Eng J 170:381–394CrossRef

Petra P, Bhattacharyya AR, Janke A (2004) Melt mixing of polycarbonate with multiwalled carbon nanotubes: microscopic studies on the state of dispersion. Eur Polym J 40:137–148CrossRef

Leszczynska A, Njuguna J, Pielichowski K, Banerjee JR (2007) Polymer/montmorillonite nanocomposites with improved thermal properties: part I. Factors influencing thermal stability and mechanisms of thermal stability improvement. Thermochim Acta 453:75–96CrossRef

Mirmohseni A, Zavareh S (2010) Preparation and characterization of an epoxy nanocomposite toughened by a combination of thermoplastic, layered and particulate nano-fillers. Mater Des 31:2699–2706CrossRef

Chen B, Evans JRG (2005) Thermoplastic starch–clay nanocomposites and their characteristics. Carbohydr Polym 61:455–463CrossRef

Hedayati M, Salehi M, Bagheri R, Panjepour M, Naeimi F (2012) Tribological and mechanical properties of amorphous and semi-crystalline PEEK/SiO₂ nanocomposite coatings deposited on the plain carbon steel by electrostatic powder spray technique. Prog Org Coat 74:50–58CrossRef

Sui G, Jana S, Zhong WH, Fuqua MA, Ulven CA (2008) Dielectric properties and conductivity of carbon nanofiber/semi-crystalline polymer composites. Acta Mater 56:2381–2388CrossRef

Santos JMRCA, Guthrie JT (2005) Polymer blends: the PC-PBT case. J Mater Chem 16:237–245CrossRef

10.

Murthy NS, Minor H (1990) General procedure for evaluating amorphous scattering crystallinity from X-ray diffraction scans of semicrystalline polymers. Polymer 31:996–1002CrossRef

11.

Powell CE, Beall GW (2006) Physical properties of polymer/clay nanocomposites. Curr Opin Solid State Mater Sci 10:73–80CrossRef

12.

Cyras VP, Manfredi LB, Ton-That MT, Vazquez A (2008) Physical and mechanical properties of thermoplastic starch/montmorillonite nanocomposite films. Carbohydr Polym 73:55–63CrossRef

13.

Marquis DM, Guillaume E, Chivas-Joly C (2011) Properties of nanofillers in polymer. In: Cuppoletti J (ed) Nanocomposites and polymers with analytical methods. InTech. doi:10.5772/21694 Available from:http://www.intechopen.com/books/nanocomposites-and-polymers-withanalytical-methods/properties-of-nanofillers-in-polymer

14.

Mishra JK, Hwang KJ, Ha CS (2005) Preparation, mechanical and rheological properties of a thermoplastic polyolefin (TPO)/organoclay nanocomposite with reference to the effect of maleic anhydride modified polypropylene as a compatibilizer. Polymer 46:1995–2002CrossRef

15.

Zhao C, Qin H, Gong F, Feng M, Zhang S, Yang M (2005) Mechanical, thermal and flammability properties of polyethylene/clay nanocomposites. Polym Degrad Stab 87:183–189CrossRef

16.

Schmidt D, Shah D, Giannelis EP (2002) New advances in polymer/layered silicate nanocomposites. Curr Opin Solid State Mater Sci 6:205–212CrossRef

17.

Weber RP, Vecchio KS, Suarez JCM (2010) Dynamic behaviour of gamma-irradiated polycarbonate. Rev Mater 15:218–224

18.

Athreya SR, Kalaitzidou K, Das S (2011) Mechanical and microstructural properties of Nylon 12/carbon black composites: selective laser sintering versus melt compounding and injection molding. Compos Sci Technol 71:506–510CrossRef

19.

Li WD, Zeng JB, Lou XJ, Zhang JJ, Wang YZ (2012) Aromatic–aliphatic random and block copolyesters: synthesis, sequence distribution and thermal properties. Polym Chem 3:1344–1353CrossRef

20.

Yeh JM, Chang KC, Peng CW, Lai MC, Hung CB, Hsu SC, Hwang SS, Lin HR (2009) Effect of dispersion capability of organoclay on cellular structure and physical properties of PMMA/clay nanocomposite foams. Mater Chem Phys 115:774-750CrossRef

21.

Fernández-Blázquez JP, del Campo A (2012) Templateless nanostructuration of polymer surfaces. Soft Matter 8:2503–2508CrossRef

22.

DePolo WS, Baird DG (2009) Particulate reinforced PC/PBT composites. II. Effect of nano-clay particles on dimensional stability and structure–property relationships. Polym Compos 30:200–213CrossRef

23.

Esmizadeh E, Naderi G, Paran SMR (2016) Preparation and characterization of hybrid nanocomposites based on NBR/nanoclay/carbon black. Polym Compos. doi:10.1002/pc.24055

24.

Mir S, Asghar B, Khan AK, Rashid R, Shaikh AJ et al (2016) The effects of nanoclay on thermal, mechanical and rheological properties of LLDPE/chitosan blend. J Polym Eng. doi:10.1515/polyeng-2015-0350

25.

Praveen S, Chattopadhyay PK, Albert P, Dalvi VG, Chakraborty BC, Chattopadhyay S (2009) Synergistic effect of carbon black and nanoclay fillers in styrene butadiene rubber matrix: development of dual structure. Compos A 40:309–316CrossRef

26.

Hoidy WH (2013) Study of preparation for co-polymer nanocomposites using PLA/LDPE/CTAB modified clay. Iraqi Natl J Chem 49:61–72

27.

Taghizadeh E, Naderi G, Razavi-Nouri M (2011) Effects of organoclay on the mechanical properties and microstructure of PA6/ECO blend. Polym Test 30:327–334CrossRef

28.

Abdelaziz M (2013) The effects of carbon nanoparticles on thermal and dielectric properties of bisphenol A polycarbonate. J Thermoplast Compos 8:1–21

29.

Bian J, Lin HL, He FX, Wang L, Wei XW, Chang T, Sancaktar E (2013) Processing and assessment of high-performance poly(butylenes terephthalate) nanocomposites reinforced with microwave exfoliated graphite oxide nanosheets. Eur Polym J 49:1406–1423CrossRef

Title: Effect of nanoclay on carbon black reinforced blend of amorphous–semicrystalline polymers
Authors: Pankaj Sharma
Vinay Panwar
Alexander P. Kharitonov
Kaushik Pal
Publication date: 31-12-2016
Publisher: Springer Berlin Heidelberg
Published in: Polymer Bulletin / Issue 8/2017
Print ISSN: 0170-0839
Electronic ISSN: 1436-2449
DOI: https://doi.org/10.1007/s00289-016-1887-9

Springer Professional

Abstract

Please log in to get access to your license.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Other articles of this Issue 8/2017

Photoisomerization of waterborne polyurethane with side-chained phenylazonaphthalene group

Preparation, antimicrobial and antioxidant evaluation of indole-3-acetic acid-based pH-responsive bio-nanocomposites

One-step synthesis of hybrid magnetic material based on polyphenoxazine and bimetallic Co–Fe nanoparticles

The role of exfoliated kaolinite on crystallinity, ion conductivity, thermal and mechanical properties of poly(ethylene oxide)/kaolinite composites

Studies of different techniques of aminolysis of poly(ethylene terephthalate) with ethylenediamine

Synthesis, characterization, and fertilizer release study of the salt and pH-sensitive NaAlg-g-poly(AA-co-AAm)/RHA superabsorbent nanocomposite

Premium Partners