Top

Published in:

2025 | OriginalPaper | Chapter

Effect of Post-treatment Process on the Mechanical Properties of 3D Printed Natural Fiber Composite Materials

Authors : Marco Russo, Pietro Russo, Maria Rosaria Ricciardi, Ilaria Papa, Francesco Napolitano, Valentina Lopresto, Antonio Langella

Published in: Dynamic Response and Failure of Composite Materials

Publisher: Springer Nature Switzerland

Activate our intelligent search to find suitable subject content or patents.

search-config

AI-assisted search

Off

Excerpt

In recent years, composites based on renewable reserves have increased involvement to reduce the environmental impact and petroleum utilisation. Among the biobased polymers, polylactic acid (PLA) is important thanks to its high versatility and different cheap commercial grades. However, its intrinsic characteristics often reduce its practice in principal applications and some strategies, such as using additives, are adopted to improve some mechanical features [1, 2]. …

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

inform now

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

inform now

previous chapter Design and Virtual Testing of Interconnecting Titanium-Almed Flanges For CFRP Grid Structure

next chapter Mechanical Performance Assessment of Vacuum-Assisted Resin-Infused Hybrid Biocomposites

Stelzer, P.S., Cakmak, U., Eisner, L., Doppelbauer, L.K., Kállai, I.: Experimental feasibility and environmental impacts of compression molded discontinuous carbon fiber composites with opportunities for circular economy. Compos. Part B 234(December 2021), 109638 (2022). https://doi.org/10.1016/j.compositesb.2022.109638

Landolfi, L., et al.: Energy-saving approach for mechanical properties enhancement of recycled PET additively manufactured by MEX. Sustain. Mater. Technol. 41(April), e01038 (2024). https://doi.org/10.1016/j.susmat.2024.e01038

Seggiani, M., et al.: Development of Fibres-Reinforced Biodegradable Composites 43, 1813–1818 (2015). https://doi.org/10.3303/CET1543303

Chaudhary, V., Bajpai, P.K., Maheshwari, S.: An Investigation on Wear and Dynamic Mechanical behavior of Jute/Hemp/Flax Reinforced Composites and Its Hybrids for Tribological Applications 19(2), 403–415 (2018). https://doi.org/10.1007/s12221-018-7759-6

Chaudhary, V., Bajpai, P.K., Maheshwari, S.: Studies on mechanical and morphological characterization of developed jute/hemp/flax reinforced hybrid composites for structural applications studies on mechanical and morphological characterization of developed jute/hemp/flax reinforced hybrid composites for structural applications. J. Nat. Fibers 00(00), 1–18 (2017). https://doi.org/10.1080/15440478.2017.1320260CrossRef

Murali, B., Yogesh, P., Karthickeyan, N.K., Chandramohan, D.: Materials Today: Proceedings Multi-potency of bast fibers (flax, hemp and jute ) as composite materials and their mechanical properties: a review. Mater. Today Proc. 62, 1839–1843 (2022). https://doi.org/10.1016/j.matpr.2022.01.001CrossRef

Vitiello Libera, R.P., Ilaria, P., Valentina, L., Davide, M., Giovanni, F.: Manufacturing of bio-polyamide 11/basalt thermoplastic laminates by hot compaction: The key-role of matrix rheology. J. Thermoplast. Compos. Mater. 36(5), 1877 (2023)

Zuccarello, B., Zingales, M.: Toward high performance renewable agave reinforced biocomposites: optimization of fi ber performance and fi ber-matrix adhesion analysis. Compos. Part B 122, 109–120 (2017). https://doi.org/10.1016/j.compositesb.2017.04.011CrossRef

Mary, S.K., et al.: Adhesion in Biocomposites: A Critical Review 6,. 531–557. https://doi.org/10.7569/RAA.2020.097312

10.

Papa I, R.P., Langella, A., Napolitano, F.: Comparison of FDMed and compression molded biocomposites in polylactic acid and food flour waste. J. Compos. Mater. 57(29), 452 (2023). https://doi.org/10.1177/00219983231211994

11.

Calì, M., Pascoletti, G., Gaeta, M., Milazzo, G., Ambu, R.: New filaments with natural fillers for FDM 3D printing and their applications in biomedical field. Procedia Manuf. 51(2019), 698–703 (2021). https://doi.org/10.1016/j.promfg.2020.10.098CrossRef

12.

Angelopoulos, P.M., Samouhos, M., Taxiarchou, M.: Functional fillers in composite filaments for fused filament fabrication; a review. Mater. Today Proc. 37, 4031–4043 (2021). https://doi.org/10.1016/j.matpr.2020.07.069CrossRef

13.

Cozzolino, E., Napolitano, F., Papa, I., Squillace, A., Astarita, A.: Influence of the heated-bed material on PLA mechanical properties and energy consumption in the FDM process. Arab. J. Sci. Eng. (2024). https://doi.org/10.1007/s13369-024-09170-8CrossRef

14.

Tolochyna, O., Zgalat-lozynska, N., Podrezov, Y.¸ Verbylo, D.: The role of flexible polymer composite materials properties in energy absorption of three-dimensional auxetic lattice structures. Mater. Today Commun. 37(July), 107370 (2023). https://doi.org/10.1016/j.mtcomm.2023.107370

15.

Napolitano, F., Cozzolino, E., Papa, I., Astarita, A., Squillace, A.: Experimental integrated approach for mechanical characteristic optimization of FDM-printed PLA in an energy-saving perspective. Int. J. Adv. Manuf. Technol. 3551–3565 (2022). https://doi.org/10.1007/s00170-022-09535-z

16.

Tiwari, J., Cozzolino, E., Devadula, S., Astarita, A.: Determination of process parameters for selective laser melting of inconel 718 alloy through evolutionary multi-objective optimization. Mater. Manuf. Process. 39(8), 1019–1028 (2024). https://doi.org/10.1080/10426914.2024.2304837CrossRef

17.

Cozzolino, E., Tiley, A.J., Ramirez, A.J., Astarita, A., Herderick, E.D.: Energy efficiency of Gaussian and ring profiles for LPBF of nickel alloy 718. Int. J. Adv. Manuf. Technol. 3093–3104 (2024). https://doi.org/10.1007/s00170-024-13511-0

18.

Cozzolino, E., Astarita, A., De Luca, M., Sinagra, C.: Life cycle assessment of the rolling process of thin aluminum sheets. Mater. Manuf. Process. 00(00), 1–16 (2024). https://doi.org/10.1080/10426914.2024.2395004CrossRef

19.

Cozzolino, E., Astarita, A., Prisco, U.: FSW of AA2024: effects of tool wear on energy consumption. Mater. Manuf. Process. 00(00), 1–8 (2024). https://doi.org/10.1080/10426914.2024.2395009CrossRef

20.

Cozzolino, E., Lopresto, V., Borrelli, D., Caraviello, A., Astarita, A.: An integrated approach to investigate the energy consumption for manufacturing and surface finishing 3D printed Inconel 718 parts. J. Manuf. Process. 79(December 2021), 193–205 (2022). https://doi.org/10.1016/j.jmapro.2022.04.045

21.

Cozzolino, E., Franchitti, S., Borrelli, R., Pirozzi, C., Astarita, A.: Energy consumption assessment in manufacturing Ti6Al4V electron beam melted parts post ‑ processed by machining. Int. J. Adv. Manuf. Technol. 1289–1303 (2023). https://doi.org/10.1007/s00170-022-10794-z

22.

Cozzolino, E., Astarita, A.: Energy saving in milling of electron beam – melted Ti6Al4V parts: influence of process parameters. Int. J. Adv. Manuf. Technol. 179–194 (2023). https://doi.org/10.1007/s00170-023-11502-1

23.

Cozzolino, E., Franchitti, S., Borrelli, R., Astarita, A.: Sustainability assessment of electron beam melted Ti6Al4V machining: energy consumption and lubricant use. Mater. Manuf. Process. 39(9), 1247–1259 (2024). https://doi.org/10.1080/10426914.2024.2311395CrossRef

24.

Manco, E., Cozzolino, E., Astarita, A.: Laser polishing of additively manufactured metal parts: a review. Surf. Eng. 38(3), 217–233 (2022). https://doi.org/10.1080/02670844.2022.2072080CrossRef

25.

El-hadi, A.M.: Correlation between degree of crystallinity, morphology, glass temperature, mechanical properties and biodegradation of poly (3-hydroxyalkanoate) PHAs and their blends (2018). https://doi.org/10.1016/S0142-9418(01)00142-8

26.

Ivey, M., et al.: Characterizing short-fiber-reinforced composites produced using additive manufacturing. Adv. Manuf. Polym. Compos. Sci. 0340, 1–11 (2017). https://doi.org/10.1080/20550340.2017.1341125CrossRef

27.

Wach, R.A., Wolszczak, P., Adamus-wlodarczyk, A.: Enhancement of Mechanical Properties of FDM-PLA Parts via Thermal Annealing 1800169, 1–9 (2018). https://doi.org/10.1002/mame.201800169

28.

Jayanth, N., Jaswanthraj, K., Sandeep, S., Mallaya, N.H., Siddharth, S.R.: Effect of heat treatment on mechanical properties of 3D printed PLA. J. Mech. Behav. Biomed. Mater. 123(June), 104764 (2021). https://doi.org/10.1016/j.jmbbm.2021.104764

29.

Letters, M.P., et al.: Improvement of flexural strength and compressive strength by heat treatment of PLA filament for 3D-printing 33, 3–7 (2019). https://doi.org/10.1142/S0217984919400256

30.

Hasan, M.S., Ivanov, T., Kovacevic, A.: Impact of aging effect and heat treatment on the tensile properties of PLA (Poly Lactic Acid) Printed Parts (October) (2020). https://doi.org/10.37358/MP.20.3.5389

31.

ASTM International. Standard test methods for flexural properties of unreinforced and reinforced plastics (ASTM D790)

32.

ISO 179-1:2010, Plastics — Determination of Charpy impact properties — Part 1: Non-instrumented impact test, International Organization for Standardization (2010)

33.

Ho, A.L.P.I.e.P.N.H.K.-L.G.: Effects of temperature and relative humidity on polylactic acid plastic degradation. J. Environ. Polym. Degrad. 7, 83–99 (1999)

34.

Kumar, S.J.R., Sadeghi, K., Jang, J.: Mechanical, chemical, and bio-recycling of biodegradable plastics: a review. Sci Total Environ. (2023). https://doi.org/10.1016/j.scitotenv.2023.163446

Title: Effect of Post-treatment Process on the Mechanical Properties of 3D Printed Natural Fiber Composite Materials
Authors: Marco Russo
Pietro Russo
Maria Rosaria Ricciardi
Ilaria Papa
Francesco Napolitano
Valentina Lopresto
Antonio Langella
Publisher: Springer Nature Switzerland
Book: Dynamic Response and Failure of Composite Materials
Print ISBN: 978-3-031-77696-0

Electronic ISBN: 978-3-031-77697-7

Copyright Year: 2025
DOI: https://doi.org/10.1007/978-3-031-77697-7_31