Top

Journal of Polymer Research

Published in:

01-02-2019 | ORIGINAL PAPER

Effect of soft segment content of Pebax® Rnew on the properties of Nylon-6/SMA/PEBA blends

Authors: Wei-Ming Chen, Ming-Chien Yang, Shinn-Gwo Hong, Yi-Shen Hsieh

Published in: Journal of Polymer Research | Issue 2/2019

Activate our intelligent search to find suitable subject content or patents.

search-config

AI-assisted search

Off

Abstract

To improve the impact property of Nylon 6 at temperature below 0°C, Nylon 6 was toughened by the blending of Pebax® Rnew (PEBA) and compatibilized with poly(styrene-co-maleic anhydride) (SMA). The effect of the content of soft segment of PEBA, polytetramethylene oxide (PTMO), on the toughening properties was investigated. The impact properties of the resulting blends were measured at 23°C and − 20°C. With the increase of PTMO content, the impact strength increased, whereas the tensile and flexural properties decreased. The thermal stability of these blends was not affected significantly. Rheological properties revealed that these blends exhibited predominantly viscous behavior at 240°C. Furthermore, higher PTMO content led to higher storage modulus (G’), lower loss modulus (G”) and complex viscosity (η*). The higher PTMO content of PEBA also improved the toughness more. The DSC results showed that the glass transition temperature (T_g) of Nylon 6 decreased with the increase of PTMO content. The crystallization temperature and the rate of crystallization of the blends were not much affected by the PTMO content, yet the relative amounts of α and γ crystals formed were affected by the type of PEBA added. Based on the Avrami model, the non-isothermal crystallization of Nylon 6 in the blends was a diffusion-controlled crystallization.

previous article Preparation and antibacterial properties of nano biocomposite Poly(ε-caprolactone)-SiO2 films with nanosilver

next article Light emitting self-healable hydrogel with bio-degradability prepared form pectin and Tetraphenylethylene bearing polymer

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

inform now

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

inform now

Yu Z, Ou Y, Qi Z, Hu G (1998). J Polym Sci B Polym Phys 36:1987–1994CrossRef

Li QF, Kim DF, Wu DZ, Lu K, Jin RG (2001). Polym Eng Sci 41:2155–2161CrossRef

Wang X, Feng W, Li H, Jin R (2003). J Appl Polym Sci 88:3110–3116CrossRef

Huang JJ, Paul DR (2006). Polymer 47:3505–3519CrossRef

Kim JG, Lee J, Son Y (2014). Mater Lett 126:43–47CrossRef

Yu ZZ, Ke YC, Ou YC, Hu GH (2000). J Appl Polym Sci 76:1285–1295CrossRef

Premphet-Sirisinha K, Chalearmthitipa S (2003). Polym Eng Sci 43:317–328CrossRef

Borggreve RJM, Gaymans RJ, Schuijer J, Housz JFI (1987). Polymer 28:1489–1496CrossRef

Wu D, Wang X, Jin R (2004). Eur Polym J 40:1223–1232CrossRef

10.

Okada O, Keskkula H, Paul DR (2004). J Polym Sci B Polym Phys 42:1739–1758CrossRef

11.

Wang BB, Wei LX, Hu GS (2008). J Appl Polym Sci 110:1344–1350CrossRef

12.

Wang Y, Wang W, Peng F, Liu M, Zhao Q, Fu PF (2009). Polym Int 58:190–197CrossRef

13.

Kumar S, Ramanaiah BV, Maiti SN (2007). Soft Mater 4:85–100CrossRef

14.

Gonzhlez-Montiel A, Keskkula H, Paul DR (1995). Polymer 36:4621–4637CrossRef

15.

Lu M, Keskkula H, Paul DR (1995). J Appl Polym Sci 58:1175–1188CrossRef

16.

Corté L, Beaume F, Leibler L (2005). Polymer 46:2748–2757CrossRef

17.

Ahn Y, Paul DR (2006). Polymer 47:2830–2838CrossRef

18.

Tanrattanakul V, Sungthong N, Raksa P (2008). Polym Test 27:794–800CrossRef

19.

Carone Jr E, Kopacak U, Goncalves MC, Nunes SP (2000). Polymer 41:5929–5935CrossRef

20.

Banerjee SS, Bhowmick AK (2013). Polymer 54:6561–6571CrossRef

21.

Kayano Y, Keskkula H, Paul DR (1997). Polymer 38:1885–1902CrossRef

22.

Wu D, Wang X, Jin R (2006). J Appl Polym Sci 99:3336–3343CrossRef

23.

Xie T, Yang G (2004). J Appl Polym Sci 93:1446–1453CrossRef

24.

Huang JJ, Keskkula H, Paul DR (2006). Polymer 47:639–651CrossRef

25.

Yu H, Zhang Y, Ren W (2009). J Polym Sci B Polym Phys 47:877–887CrossRef

26.

Liu H, Xie T, Hou L, Ou Y, Yang G (2006). J Appl Polym Sci 99:3300–3307CrossRef

27.

Yu H, Zhang Y, Ren W, Hoch M, Guo S (2011). J Appl Polym Sci 121:3340–3346CrossRef

28.

Xu C, Ma J, Li G, Wang N, Zhang Q, Grami ME, Qu X (2017). J Polym Res 24:147CrossRef

29.

Utracki LA (2003) Polymer Blends Handbook. Kluwer Academic Publishers, DordrechtCrossRef

30.

Newman S, Paul DR (1978) Polymer blends: volumes I and II. Academic Press, New York

31.

Ponnamma D, Sadasivuni KK, Wan C, Thomas S, Alma’adeed MA (2015) Flexible and stretchable electronic composites: electronic applications of polyamide elastomers and its composites. Springer Verlag, Berlin

32.

Hoffendahl C, Fontaine G, Bourbigot S (2013). Polym Degrad Stabil 98:1247–1255CrossRef

33.

Todros S, Natali AN, Piga M, Giffin GA, Pace G, Noto VD (2013). Polym Degrad Stabil 98:1126–1137CrossRef

34.

Chen WM, Yang MC, Hong SG, Hsieh YS (2017). J Polym Res 24:40CrossRef

35.

Rinawa K, Maiti SN, Sonnier R, Lopez Cuesta JM (2015). Bull Mater Sci 38:1315–1327CrossRef

36.

Wu S (1985). Polymer 26:1885CrossRef

37.

Angola JC, Fujita Y, Sakai T, Inoue T (1988). J Polym Sci B Polym Phys 26:807–816CrossRef

38.

Margolin A, Wu S (1988). Polymer 29:2170CrossRef

39.

Wu S, Margolin A (1990) Reply to comments. Polymer 31:972–974CrossRef

40.

Sjooerdsma SD (1989). Polym Commun 30:106

41.

Kim BK, Park SJ (1991). J Appl Polym Sci 43:357–363CrossRef

42.

Nouparvar H, Hassan A, Mohamad Z, Wahit MU (2014). J Elastom Plast 46:269–283CrossRef

43.

Navid N, Mat UW, Azman H, Shaya M (2011). Key Eng Mater 471-472:518–523CrossRef

44.

Ogunsona EO, Misra M, Mohanty AK (2017). RSC Adv 7:8727–8739CrossRef

45.

Thanakkasaranee S, Kim D, Seo J (2018). Polymers 10:225CrossRef

46.

Lehrle RS, Parsons IW, Rollinson M (2000). Polym Degrad Stabil 67:21–33CrossRef

47.

Macosko CW (1994) Rheology-principles, measurements, and applications. Wiley-VCH

48.

Pang H, Liao B, Huang Y, Cong G (2002). J Appl Polym Sci 86:2140–2144CrossRef

49.

Li X, Ai X, Pan H, Yang J, Gao G, Zhang H, Yang H, Dong L (2018). Polym Advan Technol 29:1706–1717CrossRef

50.

Latko P, Kolbuk D, Kozera R, Boczkowska A (2016). J Mater Eng Perform 25:68–75CrossRef

51.

Bourmaud A, Duigou AL, Gourier C, Baley C (2016). Ind Crop Prod 84:151–165CrossRef

52.

Qi F, Chen N, Wang Q (2017). Mater Des 131:135–143CrossRef

53.

Ma YL, Hu GS, Ren XL, Wang BB (2007). Mat Sci Eng A-Struct 460-461:611–618CrossRef

54.

Fornes TD, Paul DR (2003). Polymer 44:3945–3961CrossRef

55.

Illers KH (1978). Makromol Chem 179(2):497–507CrossRef

56.

Ren X, Wu G, Zhang X (2011) 2011 2nd international conference on chemistry and chemical engineering. IPCBEE 14:125–129

57.

Liu T, Tjiu WC, He C, Na SS, Chung TS (2004). Polym Int 53:392–399CrossRef

58.

Dasgupta S, Hammond WB, Goddard III WA (1996). J Am Chem Soc 118:12291–12301CrossRef

59.

Liu Y, Cui L, Guan F, Gao Y, Hedin NE, Zhu L, Fong H (2007). Macromolecules 40(17):6283–6290PubMedPubMedCentralCrossRef

60.

Katoh Y, Okamoto M (2009). Polymer 50:4718–4726CrossRef

61.

Lam RSH, Rogers MA (2011). Cryst Eng Comm 13:866–875CrossRef

Title: Effect of soft segment content of Pebax® Rnew on the properties of Nylon-6/SMA/PEBA blends
Authors: Wei-Ming Chen
Ming-Chien Yang
Shinn-Gwo Hong
Yi-Shen Hsieh
Publication date: 01-02-2019
Publisher: Springer Netherlands
Published in: Journal of Polymer Research / Issue 2/2019
Print ISSN: 1022-9760
Electronic ISSN: 1572-8935
DOI: https://doi.org/10.1007/s10965-018-1684-2

Springer Professional

Abstract

Please log in to get access to your license.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Other articles of this Issue 2/2019

Synthesis of water-soluble conjugated polymer, poly(N-3-sulfopropylaniline) and the study of its glucose sensing property

Synthesis of o-aminophenol-m-phenylenediamine copolymer: an eco-friendly approach

Synthesis, evaluation and aqueous solution behavior of the cationic fluorinated hydrophobically associating polyacrylamide

Investigation of non-adhesive behaviour of waterborne polyurethane dispersions

Synthesis of rGO/TiO2/PEDOT nanocomposites, supercapacitor device performances and equivalent electrical circuit models

Fluorinated functionalization of graphene oxide and its role as a reinforcement in epoxy composites

Premium Partners