Top

Journal of Materials Engineering and Performance

Published in:

13-09-2018

Effect of Surface Self-Nanocrystallization on Diffusion Bonding Between a Titanium Alloy and a TiAl-Based Alloy

Authors: Xuesong Fu, Xiaochen Wang, Qi Wang, Wenlong Zhou, Huiyuan Xu, Degui Liu, Zhiqiang Li, Guoqing Chen

Published in: Journal of Materials Engineering and Performance | Issue 10/2018

Activate our intelligent search to find suitable subject content or patents.

search-config

AI-assisted search

Off

Abstract

A self-nanocrystallization layer was prepared on the surface of a Ti alloy sample via shot peening to investigate its influence on the follow-up diffusion bonding between a titanium alloy and a TiAl-based alloy. The experiment results show that surface self-nanocrystallization treatment can accelerate the interface reaction between a Ti alloy and a TiAl alloy, lowering the bonding temperature of the sound joints by more than 50 K. Moreover, the thickness of the interface reaction layer plays an important role in the interfacial bonding strength. In this work, the maximum shear strength of the joint appears to have a thickness of about 1.8 μm. As a consequence, it is found that surface self-nanocrystallization treatment is helpful for optimizing the diffusion bonding process.

previous article Tension–Compression Asymmetry Improved by Cold Extrusion in Pure Magnesium

next article Microstructure, Texture, and Mechanical Properties of Ni-W Alloy After Accumulative Roll Bonding

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

inform now

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

inform now

X. Xi, W. Ding, Y. Fu, and J. Xu, Grindability Evaluation and Tool Wear During Grinding of Ti2AlNb Intermetallics, Int. J. Adv. Manuf. Technol., 2018, 94, p 1441–1450CrossRef

Y. Xia, S.D. Luo, X. Wu, G.B. Schaffer, and M. Qian, The Sintering Densification, Microstructure and Mechanical Properties of Gamma Ti-48Al-2Cr-2Nb Alloy with a Small Addition of Copper, Mater. Sci. Eng., A, 2013, 559, p 293–300CrossRef

M. Balasubramanian, Application of Box-Behnken Design for Fabrication of Titanium Alloy and 304 Stainless Steel Joints with Silver Interlayer by Diffusion Bonding, Mater. Des., 2015, 77, p 161–169CrossRef

X.R. Wang, Y.Q. Yang, X. Luo, W. Zhang, G.M. Zhao, and B. Huang, An Investigation of Ti-43Al-9 V/Ti-6Al-4V Interface by Diffusion Bonding, Intermetallics, 2013, 36, p 127–132CrossRef

W.F. Ding, J.H. Xu, M. Shen, H.H. Su, Y.C. Fu, and B. Xiao, Joining of CBN Abrasive Grains to Medium Carbon Steel with AgCu/Ti Powder Mixture as Active Brazing Alloy, Mater. Sci. Eng., A, 2006, 430, p 301–306CrossRef

Q. Miao, W. Ding, Y. Zhu, Z. Chen, and Y. Fu, Brazing of CBN Grains with Ag-Cu-Ti/TiX Composite Filler—The Effect of TiX Particles on Microstructure and Strength of Bonding Layer, Mater. Des., 2016, 98, p 243–253CrossRef

M. Holmquist, VRBP. VRBP. Tensile and Creep Properties of Diffusion Bonding Titanium Alloy IMi 843 to Gamma Titanium Aluminide IHI Alloy 01, Acta Mater., 1999, 6, p 1791–1799CrossRef

M. Holmquist, VRJO. Hot Isostatic Diffusion Bonding of Titanium Alloy Ti-6Al-4V to Gamma Titanium Aluminide IHI Alloy 01A, Scripta Mater., 1998, 6, p 1791–1799

M.M.L.X. Wang Xiu-feng, Diffusion Bonding of YTiAl Alloy to Ti-6A1-4V Alloy Under Hot Pressure, Trans. Nonferr. Metals Soc. China, 2006, 6, p 1059–1063CrossRef

10.

H. Li, C. Yang, L. Sun, and M. Li, Hot Press Bonding of γ-TiAl and TC17 at a Low Bonding Temperature by Imposing Plastic Deformation and Post Heating, Mater. Lett., 2017, 187, p 4–6CrossRef

11.

K. Lu, Nanocrystalline Metals Crystallized from Amorphous Solids: Nanocrystallization, Structure, and Properties, Mater. Sci. Eng. R Rep., 1996, 16, p 161–221CrossRef

12.

S. Kumar, K. Chattopadhyay, G.S. Mahobia, and V. Singh, Hot Corrosion Behaviour of Ti-6Al-4V Modified by Ultrasonic Shot Peening, Mater. Des., 2016, 110, p 196–206CrossRef

13.

G. Ma, B. Xu, H. Wang, H. Si, and D. Yang, Effect of Surface Nanocrystallization on the Tribological Properties of 1Cr18Ni9Ti Stainless Steel, Mater. Lett., 2011, 65, p 1268–1271CrossRef

14.

Z.B. Wang, J. Lu, and K. Lu, Chromizing Behaviors of a Low Carbon Steel Processed by Means of Surface Mechanical Attrition Treatment, Acta Mater., 2005, 53, p 2081–2089CrossRef

15.

W.P. Tong, N.R. Tao, Z.B. Wang, J. Lu, and K. Lu, Nitriding Iron at Lower Temperatures, Science, 2003, 299, p 686–688CrossRef

16.

Y. Mai, X. Jie, L. Liu, N. Yu, and X. Zheng, Thermal Stability of Nanocrystalline Layers Fabricated by Surface Nanocrystallization, Appl. Surf. Sci., 2010, 256, p 1972–1975CrossRef

17.

D. Li, H.N. Chen, and H. Xu, The Effect of Nanostructured Surface Layer on the Fatigue Behaviors of a Carbon Steel, Appl. Surf. Sci., 2009, 255, p 3811–3816CrossRef

18.

S. Lou, Y. Li, L. Zhou, X. Nie, G. He, Y. Li et al., Surface Nanocrystallization of Metallic Alloys with Different Stacking Fault Energy Induced by Laser Shock Processing, Mater. Des., 2016, 104, p 320–326CrossRef

19.

P. Chui, K. Sun, C. Sun, C. Wu, H. Wang, and Y. Zhao, Effect of Surface Nanocrystallization Induced by Fast Multiple Rotation Rolling on Mechanical Properties of a Low Carbon Steel, Mater. Des., 2012, 35, p 754–759CrossRef

20.

A. Sandá, V. García Navas, and O. Gonzalo, Surface State of Inconel 718 Ultrasonic Shot Peened: Effect of Processing Time, Material and Quantity of Shot Balls and Distance from Radiating Surface to Sample, Mater. Des., 2011, 32, p 2213–2220CrossRef

21.

N.R.S.M.L.J. Tao, Surface Nanocrystallization of Iron Induced by Ultrasonic Shop Peening, Acta Metall., 1999, 4, p 433–440

22.

G. Liu, J. Lu, and K. Lu, Surface Nanocrystallization of 316L Stainless Steel Induced by Ultrasonic Shot Peening, Mater. Sci. Eng., A, 2000, 286, p 91–95CrossRef

23.

B.N. Mordyuk, G.I. Prokopenko, M.A. Vasylyev, and M.O. Iefimov, Effect of Structure Evolution Induced by Ultrasonic Peening on the Corrosion Behavior of AISI-321 Stainless Steel, Mater. Sci. Eng., A, 2007, 458, p 253–261CrossRef

24.

H. Li, Y. Liu, M. Li, and H. Liu, The Gradient Crystalline Structure and Microhardness in the Treated Layer of TC17 via High Energy Shot Peening, Appl. Surf. Sci., 2015, 357, p 197–203CrossRef

25.

S. Bagherifard, S. Slawik, I. Fernández-Pariente, C. Pauly, F. Mücklich, and M. Guagliano, Nanoscale Surface Modification of AISI 316L Stainless Steel by Severe Shot Peening, Mater. Des., 2016, 102, p 68–77CrossRef

26.

W. Yan, L. Fang, Z. Zheng, K. Sun, and Y. Xu, Effect of Surface Nanocrystallization on Abrasive Wear Properties in Hadfield Steel, Tribol. Int., 2009, 42, p 634–641CrossRef

27.

J.L. Liu, M. Umemoto, Y. Todaka, and K. Tsuchiya, Formation of a Nanocrystalline Surface Layer on Steels by Air Blast Shot Peening, J. Mater. Sci., 2007, 42, p 7716–7720CrossRef

28.

H.P. Yang, X.C. Wu, Y.A. Min, T.R. Wu, and J.Z. Gui, Plasma Boriding of High Strength Alloy Steel with Nanostructured Surface Layer at Low Temperature Assisted by Air Blast Shot Peening, Surf. Coat. Technol., 2013, 228, p 229–233CrossRef

29.

Y.G. Liu, H.M. Li, and M.Q. Li, Characterization of Surface Layer in TC17 Alloy Treated by Air Blast Shot Peening, Mater. Des., 2015, 65, p 120–126CrossRef

30.

Y.G. Liu, M.Q. Li, and H.J. Liu, Surface Nanocrystallization and Gradient Structure Developed in the Bulk TC4 Alloy Processed by Shot Peening, J. Alloy. Compd., 2016, 685, p 186–193CrossRef

31.

H. Li, M.Q. Li, and P.J. Kang, Void Shrinking Process and Mechanisms of the Diffusion Bonded Ti-6Al-4V Alloy with Different Surface Roughness, Appl. Phys. A, 2016, 122, p 18–26CrossRef

32.

C. Herzig, T. Przeorski, and Y. Mishin, Self-diffusion in γ-TiAl: An Experimental Study and Atomistic Calculations, Intermetallics, 1999, 7, p 389–404CrossRef

33.

J. Han, G.M. Sheng, and X.L. Zhou, Diffusion Bonding of Surface Self-nanocrystallized Ti-4Al-2V and 0Cr18Ni9Ti by Means of High Energy Shot Peening, ISIJ Int., 2008, 48, p 1238–1245CrossRef

34.

X. Zhao, G. Xue, and Y. Liu, Gradient Crystalline Structure Induced by Ultrasonic Impacting and Rolling and its Effect on Fatigue Behavior of TC11 Titanium Alloy, Results Phys., 2017, 7, p 1845–1851CrossRef

35.

H. Jiang, S. Tian, W. Guo, G. Zhang, and S. Zeng, Hot Deformation Behavior and Deformation Mechanism of Two TiAl-Mo Alloys During Hot Compression, Mater. Sci. Eng., A, 2018, 719, p 104–111CrossRef

36.

C. Velmurugan, V. Senthilkumar, S. Sarala, and J. Arivarasan, Low Temperature Diffusion Bonding of Ti-6Al-4V and Duplex Stainless Steel, J. Mater. Process. Technol., 2016, 234, p 272–279CrossRef

37.

S. Kundu and S. Chatterjee, Microstructure and Mechanical Properties of Diffusion Bonded Joints Between Titanium and Stainless Steel with Copper Interlayer, Sci. Technol. Weld. Join., 2007, 12, p 572–578CrossRef

38.

G. Çam, U. Özdemir, V. Ventzke, and M. Koçak, Microstructural and Mechanical Characterization of Diffusion Bonded Hybrid Joints, J. Mater. Sci., 2008, 43, p 3491–3499CrossRef

Title: Effect of Surface Self-Nanocrystallization on Diffusion Bonding Between a Titanium Alloy and a TiAl-Based Alloy
Authors: Xuesong Fu
Xiaochen Wang
Qi Wang
Wenlong Zhou
Huiyuan Xu
Degui Liu
Zhiqiang Li
Guoqing Chen
Publication date: 13-09-2018
Publisher: Springer US
Published in: Journal of Materials Engineering and Performance / Issue 10/2018
Print ISSN: 1059-9495
Electronic ISSN: 1544-1024
DOI: https://doi.org/10.1007/s11665-018-3638-6

Springer Professional

Abstract

Please log in to get access to your license.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Other articles of this Issue 10/2018

Integrated System of Thermal/Dimensional Analysis for Quality Control of Metallic Melt and Ductile Iron Casting Solidification

Experimental Investigation of the System Nonmetallic Inclusion-Molten Steel-Refractory System at High Temperatures

Effect of the Soldering Atmosphere on the Wettability Between Sn4.0Ag0.5Cu (in wt.%) Lead-Free Solder Paste and Various Substrates

Diffusion Bonding of TiAl to Ti6Al4V Using Nanolayers

In Situ Apparatus to Study Gas–Metal Reactions and Wettability at High Temperatures for Hot-Dip Galvanizing Applications

Optimized Gating System for Steel Castings

Premium Partners