Skip to main content
EXTENDED SEARCH
Log in
Top
Journal of Polymer Research
Published in:

01-02-2025 | Original Paper

Effect of surface treatment of MWCNTs on the enhancement of the thermal and mechanical properties of aramid-MWCNT composites

Author: Hawraa Sabti

Published in: Journal of Polymer Research | Issue 2/2025

Log in

Activate our intelligent search to find suitable subject content or patents.

search-config
loading …

Abstract

The article delves into the effects of surface treatment on the enhancement of thermal and mechanical properties of aramid-MWCNT composites. It introduces the use of aliphatic and aromatic silane agents for chemical bonding, which significantly improves the performance of these composites compared to physically associated systems. The study compares the impact of these silane agents on interfacial bonding, thermal stability, and mechanical strength, showcasing the superiority of aromatic silane in achieving higher thermal stability and tensile strength. The research also highlights the importance of uniform dispersion of MWCNTs in the aramid matrix and the role of silanization in enhancing interfacial interactions. Through various characterization techniques such as FTIR, XPS, and SEM, the study demonstrates the effectiveness of silanization in improving the overall properties of the composites. The findings have significant implications for the development of high-performance polymer nanocomposites in industries such as automotive and aerospace.
AI Generated

This summary of the content was generated with the help of AI.

previous article Sugarcane bagasse reinforced polymer based environmentally sustainable composites: influence of fiber content and matrix selection

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Business + Economics & Engineering + Technology"

Online-Abonnement

Springer Professional "Business + Economics & Engineering + Technology" gives you access to:

  • more than 102.000 books
  • more than 537 journals

from the following subject areas:

  • Automotive
  • Construction + Real Estate
  • Business IT + Informatics
  • Electrical Engineering + Electronics
  • Energy + Sustainability
  • Finance + Banking
  • Management + Leadership
  • Marketing + Sales
  • Mechanical Engineering + Materials
  • Insurance + Risk


Secure your knowledge advantage now!

inform now

Springer Professional "Engineering + Technology"

Online-Abonnement

Springer Professional "Engineering + Technology" gives you access to:

  • more than 67.000 books
  • more than 390 journals

from the following specialised fileds:

  • Automotive
  • Business IT + Informatics
  • Construction + Real Estate
  • Electrical Engineering + Electronics
  • Energy + Sustainability
  • Mechanical Engineering + Materials





 

Secure your knowledge advantage now!

inform now
Literature
1.
Nasser J et al (2019) Enhanced interfacial strength of aramid fiber reinforced composites through adsorbed aramid nanofiber coatings. Compos Sci Technol 174:125–133CrossRef
2.
3.
Masuelli MA (2013) Introduction of fibre-reinforced polymers-polymers and composites: concepts, properties and processes. In: Masuelli MA (ed) Fiber reinforced polymers the technology applied for concrete repair. IntechOpen, pp 3–38
4.
Balakrishnan P et al (2016) 12 - Natural fibre and polymer matrix composites and their applications in aerospace engineering. In Rana S and Fangueiro R (eds) Advanced Composite Materials for Aerospace Engineering, Woodhead Publishing, pp 365–383
5.
Friedrich K, and Almajid A (2012)  Manufacturing aspects of advanced polymer composites for automotive applications. Appl Compos Mater 20
6.
Saba N, Jawaid M (2018) A review on thermomechanical properties of polymers and fibers reinforced polymer composites. J Ind Eng Chem 67:1–11CrossRef
7.
Abbas N et al (2016) Inexpensive sol-gel synthesis of multiwalled carbon nanotube-TiO2 hybrids for high performance antibacterial materials. Mater Sci Eng, C 68:780–788CrossRef
8.
Hull D and Clyne TW (1996) An introduction to composite materials. 2nd edn. Cambridge Solid State Science Series, Cambridge: Cambridge University Press.
9.
DeArmitt C and Rothon R (2014) Particulate fillers, selection, and use in polymer composites. In Palsule S (ed) Encyclopedia of Polymers and Composites, Springer Berlin Heidelberg: Berlin, Heidelberg, pp 1–19
10.
11.
Aqel A et al (2012) Carbon nanotubes, science and technology part (I) structure, synthesis and characterisation. Arab J Chem 5(1):1–23CrossRef
12.
13.
Verma R, Rathod MJ, Goyal RK (2020) A review on the effect of processing techniques and functionalization of filler on mechanical properties of polymer nanocomposites. IOP Conf Ser: Mater Sci Eng 798:012031CrossRef
14.
Sapiai N et al (2020) Effect of MWCNT Surface functionalisation and distribution on compressive properties of kenaf and hybrid kenaf/glass fibres reinforced polymer composites. Polymers 12>
15.
Wang Y et al (2019) Itaconic acid–doped polyaniline/MWCNTs nanocomposites for microwave absorbing materials. High Perform Polym 31(8):928–934CrossRef
16.
Yang G et al (2020) Understanding the transport enhancement of poly (vinyl alcohol) based hybrid membranes with dispersed nanochannels for pervaporation application. J Membr Sci 603:118005CrossRef
17.
Pötschke P et al (2019) Melt-mixed PP/MWCNT composites: influence of CNT incorporation strategy and matrix viscosity on filler dispersion and electrical resistivity. Polymers (Basel) 11(2)
18.
Azizi-Lalabadi M et al (2020) Carbon nanomaterials against pathogens; the antimicrobial activity of carbon nanotubes, graphene/graphene oxide, fullerenes, and their nanocomposites. Adv Coll Interface Sci 284:102250CrossRef
19.
Yaghoubi A and Alavi Nikje MM (2018) Silanization of multi-walled carbon nanotubes and the study of its effects on the properties of polyurethane rigid foam nanocomposites. Compos Part A: Appl Sci and Manuf 109:338–344
20.
Aslam MM-A et al (2021) Functionalized carbon nanotubes (CNTs) for water and wastewater treatment: preparation to application. Sustainability 13(10):5717CrossRef
21.
Stevens J et al (2003) Sidewall amino-functionalization of single-walled carbon nanotubes through fluorination and subsequent reactions with terminal diamines. Nano Letters - NANO LETT 3
22.
Gimenes Benega MA et al (2021) Improvements in thermal and mechanical properties of composites based on epoxy-carbon nanomaterials - a brief landscape. Polym Testing 98:107180CrossRef
23.
Hameed A et al (2015) Thermal and mechanical properties of carbon nanotube/epoxy nanocomposites reinforced with pristine and functionalized multiwalled carbon nanotubes. Polym Compos 36(10):1891–1898CrossRef
24.
Meng H et al (2009) Friction and wear behavior of carbon nanotubes reinforced polyamide 6 composites under dry sliding and water lubricated condition. Compos Sci Technol 69(5):606–611CrossRef
25.
Socher R et al (2011) Melt mixed nano composites of PA12 with MWNTs: Influence of MWNT and matrix properties on macrodispersion and electrical properties. CCompos Sci Technol- COMPOS SCI TECHNOL 71:306–314CrossRef
26.
Ryu J, Han M (2014) Improvement of the mechanical and electrical properties of polyamide 6 nanocomposites by non-covalent functionalization of multi-walled carbon nanotubes. Compos Sci Technol 102:169–175CrossRef
27.
Bai J et al (2014) Influence of carbon nanotubes on the rheology and dynamic mechanical properties of polyamide-12 for laser sintering. Polymer Testing 36
28.
Versavaud S et al (2014) Influence of injection molding on the electrical properties of polyamide 12 filled with multi-walled carbon nanotubes. Polymer 55(26):6811–6818CrossRef
29.
Otaegi I et al (2019) The effect of the preparation method and the dispersion and aspect ratio of CNTs on the mechanical and electrical properties of bio-based polyamide-4, 10/CNT nanocomposites. Polymers 11(12):2059CrossRefPubMedPubMedCentral
30.
Ahmad Z, Al-Sagheer F, Shiju J (2016) Aramid–multiwalled carbon nanotube nanocomposites: effect of compatibilization through oligomer wrapping of the nanotubes. Polym Int 65(10):1204–1213CrossRef
31.
32.
Kwan YCG, Ng GM, Huan CHA (2015) Identification of functional groups and determination of carboxyl formation temperature in graphene oxide using the XPS O 1s spectrum. Thin Solid Films 590:40–48CrossRef
33.
Slot TK et al (2018) Surface oxidation of Ti3C2Tx enhances the catalytic activity of supported platinum nanoparticles in ammonia borane hydrolysis. 2D Mater 8(1): 015001
34.
Clichici S et al (2014) Short-term splenic impact of single-strand DNA functionalized multi-walled carbon nanotubes intraperitoneally injected in rats. J Appl Toxicol 34(4):332–344CrossRefPubMed
35.
Bello H, Coelho RL, Becker D (2017) Role of chemical funcionalization of carbon nanoparticles in epoxy matrices. J Compos Mater 52:002199831770908
36.
37.
Velasco-Santos C et al (2011) Influence of silanization treatment on thermomechanical properties of multiwalled carbon nanotubes: poly(methylmethacrylate) nanocomposites. J Nanomater 2011(1):928659
38.
Atif R, Inam F (2016) Reasons and remedies for the agglomeration of multilayered graphene and carbon nanotubes in polymers. Beilstein J Nanotechnol 7:1174–1196CrossRefPubMedPubMedCentral
39.
Vasil’ev SG et al (2013) A solid-state NMR investigation of MQ silicone copolymers. Appl Magn Reson 44(9): 1015–1025
40.
Hsu YW et al (2017) Synthesis and properties of carbon nanotube-grafted silica nanoarchitecture-reinforced poly(Lactic Acid). Materials (Basel) 10(7)
41.
Tariq F, Shifa M, Baloch RA (2018) Mechanical and thermal properties of multi-scale carbon nanotubes-carbon fiber–epoxy composite. Arab J Sci Eng 43(11):5937–5948CrossRef
42.
Shiju J et al (2018) In-situ preparation of aramid-multiwalled CNT nano-composites: morphology, thermal mechanical and electric properties. Nanomaterials (Basel) 8(5)
43.
Hoepfner J, Pezzin S (2016) Functionalization of carbon nanotubes with (3-glycidyloxypropyl)-trimethoxysilane: effect of wrapping on epoxy matrix nanocomposites. J Appl Polym Sci 133(47):44245
44.
Avilés EC, Wilson NH, Stoeckli ET (2013) Sonic hedgehog and Wnt: antagonists in morphogenesis but collaborators in axon guidance. Front Cell Neurosci 7:86CrossRefPubMedPubMedCentral
45.
Lee J, Rhee K, Park S (2010) The tensile and thermal properties of modified CNT reinforced basalt/epoxy composites. Mater Sci Eng A 527(26):6838-6843
46.
Kim JS et al (2010) Determination of cytotoxicity attributed to multiwall carbon nanotubes (MWCNT) in normal human embryonic lung cell (WI-38) line. J Toxicol Environ Health A 73(21–22):1521–1529CrossRefPubMed
47.
Bahramnia H et al (2021) Epoxy/polyurethane hybrid nanocomposite coatings reinforced with MWCNTs and SiO2 nanoparticles: Processing, mechanical properties and wear behavior. Surf Coat Technol 415:127121CrossRef
48.
Gao J et al (2022) Effective dispersion of oxidized multi-walled carbon nanotubes using a water-soluble N, O-carboxymethyl chitosan via non-covalent interaction. RSC Adv 12(36):23754–23761CrossRefPubMedPubMedCentral
49.
Sezgin H et al (2022) Thermal and thermo-mechanical characterization of MWCNTs integrated E-glass/carbon fabric reinforced composites. J Ind Text 51(5_suppl):8845S-8864S
50.
Yoti J, Singh BP, Arya AK, Dhakate S (2016) Dynamic mechanical properties of multiwall carbon nanotube reinforced ABS composites and their correlation with entanglement density, adhesion, reinforcement and C factor. RSC Adv. https://​doi.​org/​10.​1039/​C5RA25561A
51.
Arunkumar T et al (2020) Synthesis and characterisation of multi-walled carbon nanotubes (MWCNTs). Int J Ambient Energy 41(4):452–456CrossRef
52.
Neto JSS et al (2023) Effect of multi-walled carbon nanotubes on the mechanical and thermal properties of curauá natural-fiber-reinforced composites. C 9(4):102
53.
Islam MR, Beg MDH (2019) Thermo-mechanical properties of glass fiber and functionalized multi-walled carbon nanotubes filled polyester composites. Polym Compos 40(S2):E1235–E1242CrossRef
54.
Kang S et al (2020) Multiwalled carbon nanotube pretreatment to enhance tensile properties, process stability, and filler dispersion of polyamide 66 nanocomposites. Compos B Eng 198:108204CrossRef
55.
Taraghi I, Fereidoon A, Mohyeddin A (2014) The effect of MWCNTs on the mechanical properties of woven Kevlar/epoxy composites. Steel Compos Struct 17:825–834CrossRef
Metadata
Title
Effect of surface treatment of MWCNTs on the enhancement of the thermal and mechanical properties of aramid-MWCNT composites
Author
Hawraa Sabti
Publication date
01-02-2025
Publisher
Springer Netherlands
Published in
Journal of Polymer Research / Issue 2/2025
Print ISSN: 1022-9760
Electronic ISSN: 1572-8935
DOI
https://doi.org/10.1007/s10965-025-04286-3

Other articles of this Issue 2/2025

Investigation of a constitutive law for the prediction of the mechanical behavior of WEEE recycled polymer blends

  • Open Access
  • Original Paper

Optimization of the poloxamer 407-conjugated gelatin to synthesize pH-sensitive nanocarriers for controlled paclitaxel delivery

  • Open Access
  • Original Paper

Conformation and thermoresponsiveness of a graft copolymer at poly-2-isopropyl-2-oxazoline side chains and an aromatic polyester main chain with a short alkylene spacer

  • Original Paper

Synthesis and characterization of an injectable, self-healing hydrogel based on succinyl chitosan, oxidized pectin, and cellulose nanofiber for biomedical applications

  • Original Paper

A novel synthesis route for waterborne polyisocyanate crosslinkers

  • Original Paper

Chain transfer to monomer – the main chain-growth termination reaction in radical ring-opening polymerization of ketene acetals

  • Original Paper

Premium Partners

    Image Credits