Skip to main content
Top
Published in: Chinese Journal of Mechanical Engineering 4/2017

12-06-2017 | ORIGINAL ARTICLE

Effect of the Inclination of Baffles on the Power Consumption and Fluid Flows in a Vessel Stirred by a Rushton Turbine

Authors: Youcef Kamla, Mohamed Bouzit, Houari Ameur, Mohammed Ilies Arab, Abdessalam Hadjeb

Published in: Chinese Journal of Mechanical Engineering | Issue 4/2017

Log in

Activate our intelligent search to find suitable subject content or patents.

search-config
loading …

Abstract

The role of baffles in mechanically stirred tanks is to promote the stability of power drawn by the impeller and to avoid the fluid swirling, thus enhancing mixing. The present paper numerically investigates the baffles effects in a vessel stirred by a Rushton turbine. The geometric factor of interest is the baffle inclination which is varying between 25°, 32.5°, 45°, 70° and 90° at different impeller rotational speeds. The impeller rotational direction has also been varied. The vortex size and power consumption were evaluated for each geometrical configuration. It was found that the best configuration is the baffle inclination by α = 70° at a negative angular velocity.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

  • über 102.000 Bücher
  • über 537 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Finance + Banking
  • Management + Führung
  • Marketing + Vertrieb
  • Maschinenbau + Werkstoffe
  • Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

  • über 67.000 Bücher
  • über 390 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Maschinenbau + Werkstoffe




 

Jetzt Wissensvorsprung sichern!

Literature
1.
go back to reference M S Moeini, J M Khodadadi. Energy efficiency improvement and fuel savings in water heaters using baffles. Applied Energy, 2013, 102: 520–533. M S Moeini, J M Khodadadi. Energy efficiency improvement and fuel savings in water heaters using baffles. Applied Energy, 2013, 102: 520–533.
2.
go back to reference V B Gawande, A S Dhoble, D B Zodpe, et al. Experimental and CFD investigation of convection heat transfer in solar air heater with reverse L-shaped ribs. Solar Energy, 2016, 131: 275–295. V B Gawande, A S Dhoble, D B Zodpe, et al. Experimental and CFD investigation of convection heat transfer in solar air heater with reverse L-shaped ribs. Solar Energy, 2016, 131: 275–295.
4.
go back to reference H Ameur, M Bouzit. Power consumption for stirring shear thinning fluids by two-blade impeller. Energy, 2013, 50: 326-332. H Ameur, M Bouzit. Power consumption for stirring shear thinning fluids by two-blade impeller. Energy, 2013, 50: 326-332.
5.
go back to reference J P TorrÉ, F David, Fletcher, et al. An experimental and computational study of the vortex shape in a partially baffled agitated vessel. Chemical Engineering Science, 2007, 2007, 62: 1915–1926. J P TorrÉ, F David, Fletcher, et al. An experimental and computational study of the vortex shape in a partially baffled agitated vessel. Chemical Engineering Science, 2007, 2007, 62: 1915–1926.
6.
go back to reference M Ciofalo. Turbulent flow in closed and free-surface unbaffled tanks stirred by radial impellers. Chemical Engineering Science, 1996, 51: 3557–3573. M Ciofalo. Turbulent flow in closed and free-surface unbaffled tanks stirred by radial impellers. Chemical Engineering Science, 1996, 51: 3557–3573.
7.
go back to reference S Nagata. Mixing: Principle and applications. Wiley, New York, 1975. S Nagata. Mixing: Principle and applications. Wiley, New York, 1975.
8.
go back to reference H Ameur, M Bouzit, M Helmaoui. Hydrodynamic study involving a Maxblend impeller with yield stress fluids. Journal of Mechanical Science and Technology, 2012, 26: 1523–1530. H Ameur, M Bouzit, M Helmaoui. Hydrodynamic study involving a Maxblend impeller with yield stress fluids. Journal of Mechanical Science and Technology, 2012, 26: 1523–1530.
9.
go back to reference H Ameur, M Bouzit, A Ghenaim. Hydrodynamics in a vessel stirred by simple and double helical ribbon impellers. Central European Journal of Engineering, 2013, 3: 87–98. H Ameur, M Bouzit, A Ghenaim. Hydrodynamics in a vessel stirred by simple and double helical ribbon impellers. Central European Journal of Engineering, 2013, 3: 87–98.
10.
go back to reference G B Tatterson. Fluid mixing and gas dispersion in agitated tanks. McGraw-Hill, New York, 1991. G B Tatterson. Fluid mixing and gas dispersion in agitated tanks. McGraw-Hill, New York, 1991.
11.
go back to reference M Assirelli, W Bujalski, A Eaglesham, et al. Macro and micromixing studies in an unbaffled vessel agitated by a Rushton turbine. Chemical Engineering Science, 2008, 63: 35–46. M Assirelli, W Bujalski, A Eaglesham, et al. Macro and micromixing studies in an unbaffled vessel agitated by a Rushton turbine. Chemical Engineering Science, 2008, 63: 35–46.
12.
go back to reference H Ameur, M Bouzit, M Helmaoui. Numerical study of fluid flow and power consumption in a stirred vessel with a Scaba 6SRGT impeller. Chemical and Process Engineering, 2011, 32: 351–366. H Ameur, M Bouzit, M Helmaoui. Numerical study of fluid flow and power consumption in a stirred vessel with a Scaba 6SRGT impeller. Chemical and Process Engineering, 2011, 32: 351–366.
13.
go back to reference A Iranshahia, C Devalsa, M Henichea, et al. Hydrodynamics characterization of the Maxblend impeller. Chemical Engineering Science, 2007, 62: 3641–3653. A Iranshahia, C Devalsa, M Henichea, et al. Hydrodynamics characterization of the Maxblend impeller. Chemical Engineering Science, 2007, 62: 3641–3653.
14.
go back to reference F Strek, J Karcz. Experimental studies of power consumption for agitated vessels equipped with non-standard baffles and high-speed agitator. Chemical Engineering and Processing: Process Intensification, 1993, 32: 349–357. F Strek, J Karcz. Experimental studies of power consumption for agitated vessels equipped with non-standard baffles and high-speed agitator. Chemical Engineering and Processing: Process Intensification, 1993, 32: 349–357.
15.
go back to reference W M Lu, H Z Wu, M Y Ju. Effects of baffle design on the liquid mixing in an aerated stirred tank with standard Rushton turbine impellers. Chemical Engineering Science, 1997, 52(21–22): 3843–3851. W M Lu, H Z Wu, M Y Ju. Effects of baffle design on the liquid mixing in an aerated stirred tank with standard Rushton turbine impellers. Chemical Engineering Science, 1997, 52(21–22): 3843–3851.
16.
go back to reference S Youcefi, M Bouzit, H Ameur, et al. Effect of some design parameters on the flow fields and power consumption in a vessel stirred by a Rushton turbine. Chemical and Process Engineering, 2013, 34: 293-307. S Youcefi, M Bouzit, H Ameur, et al. Effect of some design parameters on the flow fields and power consumption in a vessel stirred by a Rushton turbine. Chemical and Process Engineering, 2013, 34: 293-307.
17.
go back to reference H Ameur, M Bouzit, A Ghenaim. Numerical study of the performance of multistage Scaba 6SRGT impellers for the agitation of yield stress fluids in cylindrical tanks. Journal of Hydrodynamics, 2015, 27: 436-442. H Ameur, M Bouzit, A Ghenaim. Numerical study of the performance of multistage Scaba 6SRGT impellers for the agitation of yield stress fluids in cylindrical tanks. Journal of Hydrodynamics, 2015, 27: 436-442.
18.
go back to reference I Naude. Direct simulations of impellers in a stirred tank. Contribution to the optimization of the choice of an agitator. Ph.D. Thesis, INPT, France, 1998. I Naude. Direct simulations of impellers in a stirred tank. Contribution to the optimization of the choice of an agitator. Ph.D. Thesis, INPT, France, 1998.
19.
go back to reference J Y Luo, A D Gosman, R I Issa, et al. Full flow field computation of mixing in baffled stirred vessels. Chemical Engineering Research and Design, 1993, 71: 342–344. J Y Luo, A D Gosman, R I Issa, et al. Full flow field computation of mixing in baffled stirred vessels. Chemical Engineering Research and Design, 1993, 71: 342–344.
20.
go back to reference D A Deglon, C J Meyer. CFD modelling of stirred tanks: Numerical considerations. Minerals Engineering, 2006, 19: 1059–1068. D A Deglon, C J Meyer. CFD modelling of stirred tanks: Numerical considerations. Minerals Engineering, 2006, 19: 1059–1068.
21.
go back to reference J N Haque, T Mahmud, K Roberts. Modeling turbulent flows with free surface in unbaffled agitated vessels. Industrial and Engineering Chemistry Research, 2006, 45: 2881–2891. J N Haque, T Mahmud, K Roberts. Modeling turbulent flows with free surface in unbaffled agitated vessels. Industrial and Engineering Chemistry Research, 2006, 45: 2881–2891.
22.
go back to reference H Wu, G K Patterson. Laser-Doppler measurements of turbulent-flow parameters in a stirred mixer. Chemical Engineering Science, 1989, 44: 2207–2221. H Wu, G K Patterson. Laser-Doppler measurements of turbulent-flow parameters in a stirred mixer. Chemical Engineering Science, 1989, 44: 2207–2221.
23.
go back to reference C Galleti, E Brunazzi. On the main flow features and instabilities in an unbaffled vessel agitated with an eccentrically located impeller. Chemical Engineering Science, 2008, 63: 4494–4505. C Galleti, E Brunazzi. On the main flow features and instabilities in an unbaffled vessel agitated with an eccentrically located impeller. Chemical Engineering Science, 2008, 63: 4494–4505.
24.
go back to reference J Karcz, M Major. An effect of a baffle length on the power consumption in an agitated vessel. Chemical Engineering and Processing: Process Intensification, 1998, 37: 249–56. J Karcz, M Major. An effect of a baffle length on the power consumption in an agitated vessel. Chemical Engineering and Processing: Process Intensification, 1998, 37: 249–56.
25.
go back to reference M Ammar, Z Driss, W Chtourou, et al. Effects of baffle length on turbulent flows generated in stirred vessels. Central European Journal of Engineering, 2011, 1: 401–412. M Ammar, Z Driss, W Chtourou, et al. Effects of baffle length on turbulent flows generated in stirred vessels. Central European Journal of Engineering, 2011, 1: 401–412.
26.
go back to reference F Strek, J Karcz. Experimental determination of the optimal geometry of baffles for heat transfer in an agitated. Chemical Engineering and Processing: Process Intensification, 1991, 29: 165-172. F Strek, J Karcz. Experimental determination of the optimal geometry of baffles for heat transfer in an agitated. Chemical Engineering and Processing: Process Intensification, 1991, 29: 165-172.
27.
go back to reference C Dan Taca, M Paunescu. Power input in closed stirred vessels. Chemical Engineering Science, 2001, 56: 4445–4450. C Dan Taca, M Paunescu. Power input in closed stirred vessels. Chemical Engineering Science, 2001, 56: 4445–4450.
Metadata
Title
Effect of the Inclination of Baffles on the Power Consumption and Fluid Flows in a Vessel Stirred by a Rushton Turbine
Authors
Youcef Kamla
Mohamed Bouzit
Houari Ameur
Mohammed Ilies Arab
Abdessalam Hadjeb
Publication date
12-06-2017
Publisher
Chinese Mechanical Engineering Society
Published in
Chinese Journal of Mechanical Engineering / Issue 4/2017
Print ISSN: 1000-9345
Electronic ISSN: 2192-8258
DOI
https://doi.org/10.1007/s10033-017-0158-5

Other articles of this Issue 4/2017

Chinese Journal of Mechanical Engineering 4/2017 Go to the issue

Premium Partners