Top

Published in:

01-06-2024 | STRUCTURE, PHASE TRANSFORMATIONS, AND DIFFUSION

Effect of Thermal-Kinetic Conditions of Austenite Transformation on the Structural-Phase State of Low-Carbon Steel Sheets

Authors: Yu. V. Khlebnikova, I. L. Yakovleva, L. Yu. Egorova, T. R. Suaridze, N. L. Chernenko, V. V. Ryabov, S. V. Korotovskaya, E. I. Khlusova

Published in: Physics of Metals and Metallography | Issue 6/2024

Activate our intelligent search to find suitable subject content or patents.

search-config

AI-assisted search

Off

Abstract

The structure and mechanical properties of rolled sheets with a thickness of 40 mm made of low-carbon low-alloyed steel after thermomechanical treatment of different modes are investigated. The structural factors that affect obtaining high mechanical properties are established. It is shown that a complex treatment including quenching from the rolling temperature and high-temperature tempering with a subsequent additional cycle of quenching and tempering leads to formation of rolled sheet uniform over the cross section with a fragmented bainite structure with disperse niobium carbides and carbides of cementite type. Such structure provides a yield strength of no less than 630 MPa in combination with high values of the impact energy at negative temperatures and a level of plasticity of δ ≈ 20%.

previous article Phase-Structural State of τ-MnAl(Ga) Alloys Prepared at Different Cooling Rates

next article Calculation of the Yield Strength of Polycrystalline Materials with a Hexagonal Close-Packed Lattice at a Given Texture

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

inform now

Springer Professional "Wirtschaft"

Online-Abonnement

Mit Springer Professional "Wirtschaft" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 340 Zeitschriften

aus folgenden Fachgebieten:

Bauwesen + Immobilien
Business IT + Informatik
Finance + Banking
Management + Führung
Marketing + Vertrieb
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

inform now

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

inform now

M. L. Bernshtein, V. A. Zaimovskii, and L. M. Kaputkina, Thermomechanical Treatment of Steel (Metallurgiya, Moscow, 1983).

M. V. Golubeva, O. V. Sych, E. I. Khlusova, G. D. Motovilina, E. V. Sviatysheva, S. V. Rogozhkin, and A. A. Lukyanchuk, “Structure changes of high-strength economically alloyed steel 09KhGN2MD (09CrMnNi2MoCu) when tempering,” Vopr. Materialoved., No. 1, 15–26 (2018). https://doi.org/10.22349/1994-6716-2018-93-1-15-26

T. V. Kniazyuk, N. S. Novoskoltsev, E. I. Khlusova, and A. A. Zisman, “Influence of vanadium, niobium and boron on kinetics of austenite recrystallization of steels with different strength levels under hot deformation conditions,” Vopr. Materialoved., No. 1, 5–14 (2023). https://doi.org/10.22349/1994-6716-2023-113-1-05-14

V. R. Nikitina, U. A. Pazilova, and E. I. Khlusova, “Effect of vanadium and niobium on phase transformations in chromium–nickel–molybdenum shipbuilding steel.,” Vopr. Materialoved., No. 2, 15–26 (2023). https://doi.org/10.22349/1994-6716-2023-114-2-15-26

A. A. Zisman, T. V. Soshina, and Ye. I. Khlusova, “Effects of microalloying with niobium on austenite recrystallization process in low-carbon steels,” Vopr. Materialoved., No. 1, 31–36 (2013).

A. I. Fernandez, P. Uranga, B. Lopez, and J. Rodriguezibabe, “Dynamic recrystallization behavior covering a wide austenite grain size range in Nb and Nb–Ti microalloyed steels,” Mater. Sci. Eng. A 361, 367–376 (2003). https://doi.org/10.1016/s0921-5093(03)00562-8CrossRef

O. V. Sych, A. A. Kruglova, V. M. Schastlivtsev, T. I. Tabatchikova, and I. L. Yakovleva, “Effect of vanadium on the precipitation strengthening upon tempering of a high-strength pipe steel with different initial structure,” Phys. Met. Metallogr. 117, 1270–1280 (2016). https://doi.org/10.1134/s0031918x16120152CrossRef

S. V. Korotovskaya, O. V. Sych, E. I. Khlusova, and E. V. Zabavicheva, “Influence of the content of chromium in low-carbon bainitic-martensitic steels on the efficiency,” Vopr. Materialoved., No. 2, 36–47 (2023). https://doi.org/10.22349/1994-6716-2023-114-2-36-47

S. N. Sergeev, I. M. Safarov, A. P. Zhilyaev, R. M. Galeev, S. V. Gladkovskii, and D. A. Dvoinikov, “Effect of deformation-thermal processing on the microstructure and mechanical properties of low-carbon structural steel,” Phys. Met. Metallogr. 122, 621–627 (2021). https://doi.org/10.1134/s0031918x21060090CrossRef

10.

A. A. Zisman, T. V. Soshina, and Ye. I. Khlusova, “Structural changes’ maps in austenite low-carbon steel 09KhN2MDF at hot deformation formed and used for technological optimization,” Vopr. Materialoved., No. 1, 37–48 (2013).

11.

P. V. Shilyaev, D. I. Bogach, M. L. Krasnov, V. L. Kornilov, P. A. Stekanov, V. M. Schastlivtsev, I. L. Yakovleva, V. N. Urtsev, D. M. Khabibulin, and A. V. Shmakov, “Mechanical properties and structural state of rolled sheets from high-strength wear-resistant weldable steel H500 Magstrong^®,” Met. Sci. Heat Treat. 62, 664–668 (2020). https://doi.org/10.1007/s11041-021-00620-wCrossRef

12.

I. Yu. Pyshmintsev, A. N. Boryakova, and M. A. Smirnov, “Effect of cooling rate on the structure and properties of low-carbon tube steel,” Metallurgist 52, 464–469 (2008). https://doi.org/10.1007/s11015-008-9081-4CrossRef

13.

V. M. Schastlivtsev, T. I. Tabatchikova, I. L. Yakovleva, S. Yu. Del’gado Reina, S. A. Golosienko, U. A. Pazilova, and E. I. Khlusova, “Effect of thermomechanical treatment on the resistance of low-carbon low-alloy steel to brittle fracture,” Phys. Met. Metallogr. 116, 189–199 (2015). https://doi.org/10.1134/s0031918x15020106CrossRef

14.

M. V. Golubeva, O. V. Sych, E. I. Khlusova, and G. V. Motovilina, “Study of mechanical properties and fracture mode of new sparingly alloyed cold-resistant steel with yield strength not less than 690 MPa,” Aviats. Mater. Tekhnol., No. 4, 19–24 (2017). https://doi.org/10.18577/2071-9140-2017-0-4-19-24

15.

L. I. Efron, Metallurgy in Big Metallurgy: Tube Steels (Metallurgizdat, Moscow, 2012).

16.

I. Yu. Pyshmintsev and M. A. Smirnov, Structure and Properties of Steel for Mainstream Pipelines (Ural. Politekh. Inst., Ekaterinburg, 2019).

17.

D. Wang, Q. Zhong, J. Yang, and Sh. Zhang, “Effects of Cr and Ni on the microstructure and corrosion resistance of high-strength low alloy steel,” J. Mater. Res. Technol. 23, 36–52 (2023). https://doi.org/10.1016/j.jmrt.2022.12.191CrossRef

18.

M. Soleimani, H. Mirzadeh, and Ch. Dehghanian, “Effect of grain size on the corrosion resistance of low carbon steel,” Mater. Res. Express 7, 016522 (2020). https://doi.org/10.1088/2053-1591/ab62faCrossRef

19.

P. Wang, L. Ma, X. Cheng, and X. Li, “Effect of grain size and crystallographic orientation on the corrosion behaviors of low alloy steel,” J. Alloys Compd. 857, 158258 (2021). https://doi.org/10.1016/j.jallcom.2020.158258CrossRef

20.

I. I. Gorbachev, E. I. Korzunova, V. V. Popov, D. M. Khabibulin, and N. V. Urtsev, “Simulation of austenite grain growth in low-alloyed steels upon austenitization,” Phys. Met. Metallogr. 124, 290–295 (2023). https://doi.org/10.1134/s0031918x23600100CrossRef

21.

22.

V. M. Schastlivtsev, T. I. Tabatchikova, I. L. Yakovleva, S. Yu. Klyueva, A. A. Kruglova, E. I. Khlusova, and V. V. Orlov, “Microstructure and properties of low-carbon weld steel after thermomechanical strengthening,” Phys. Met. Metallogr. 113, 480–488 (2012). https://doi.org/10.1134/s0031918x12050067CrossRef

23.

V. M. Schastlivtsev, T. I. Tabatchikova, I. L. Yakovleva, S. Yu. Klyueva, A. A. Kruglova, E. I. Khlusova, and V. V. Orlov, “Effect of austenite-decomposition temperature on bainite morphology and properties of low-carbon steel after thermomechanical treatment,” Phys. Met. Metallogr. 114, 419–429 (2013). https://doi.org/10.1134/s0031918x13050086CrossRef

24.

I. L. Yakovleva, N. A. Tereshchenko, and N. V. Urtsev, “Observation of the martensitic-austenitic component in the structure of low-carbon low-alloy pipe steel,” Phys. Met. Metallogr. 121, 352–358 (2020). https://doi.org/10.1134/s0031918x20040171CrossRef

25.

G. Krauss and S. W. Thompson, “Ferritic microstructures in continuously cooled low- and ultralow-carbon steels,” ISIJ Int. 35, 937–945 (1995). https://doi.org/10.2355/isijinternational.35.937CrossRef

26.

A. S. Oryshchenko, S. A. Golosienko, E. I. Khlusova, O. V. Sych, S. V. Korotovskaya, V. V. Ryabov, E. A. Shumilov, E. A. Yashina, A. D. Vladimirov, A. G. Popkov, G. E. Khadeev, and G. D. Gelever, “Rolled sheet made from high-strength steel,” RF Patent No. 2726056 C1.

Title: Effect of Thermal-Kinetic Conditions of Austenite Transformation on the Structural-Phase State of Low-Carbon Steel Sheets
Authors: Yu. V. Khlebnikova
I. L. Yakovleva
L. Yu. Egorova
T. R. Suaridze
N. L. Chernenko
V. V. Ryabov
S. V. Korotovskaya
E. I. Khlusova
Publication date: 01-06-2024
Publisher: Pleiades Publishing
Published in: Physics of Metals and Metallography / Issue 6/2024
Print ISSN: 0031-918X
Electronic ISSN: 1555-6190
DOI: https://doi.org/10.1134/S0031918X24600647

Calculation of the Yield Strength of Polycrystalline Materials with a Hexagonal Close-Packed Lattice at a Given Texture

STRENGTH AND PLASTICITY

Electro-Optic Effect in Hexagonal Compounds RFeO3

ELECTRICAL AND MAGNETIC PROPERTIES

Electrophysical Properties of Stainless Chromium–Nickel Steel at High Pressures and Temperatures at Stepwise Shock Compression

ELECTRICAL AND MAGNETIC PROPERTIES

On the Effect of Heating of Two-Phase Alloyed Brasses on Morphological Peculiarities of Intermetallic Inclusions

STRUCTURE, PHASE TRANSFORMATIONS, AND DIFFUSION

Microstructure of Fracture Surfaces after Radial Compression of Annular Specimens Made of Cladding Austenitic Steel Exposed to Damaging Dose above 100 dpa

STRENGTH AND PLASTICITY

Influence of Magnetic Field on Phase Transitions in the Antiferromagnetic Potts Model

ELECTRICAL AND MAGNETIC PROPERTIES

Springer Professional

Abstract

Please log in to get access to your license.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Wirtschaft"

Springer Professional "Technik"

Calculation of the Yield Strength of Polycrystalline Materials with a Hexagonal Close-Packed Lattice at a Given Texture

Electro-Optic Effect in Hexagonal Compounds RFeO3

Electrophysical Properties of Stainless Chromium–Nickel Steel at High Pressures and Temperatures at Stepwise Shock Compression

On the Effect of Heating of Two-Phase Alloyed Brasses on Morphological Peculiarities of Intermetallic Inclusions

Microstructure of Fracture Surfaces after Radial Compression of Annular Specimens Made of Cladding Austenitic Steel Exposed to Damaging Dose above 100 dpa

Influence of Magnetic Field on Phase Transitions in the Antiferromagnetic Potts Model