Skip to main content
main-content
Top

Hint

Swipe to navigate through the articles of this issue

Published in: Physics of Metals and Metallography 13/2021

10-09-2021 | STRENGTH AND PLASTICITY

Effects of ECAP with One Pass Severe Deformation on Microhardness, Texture, and Corrosion Behavior of AA1370 Aluminum Alloy Wire

Authors: Youcef Hadj Ali, Nacer Zazi, Hülya Durmus, Jean-Paul Chopart

Published in: Physics of Metals and Metallography | Issue 13/2021

Login to get access
share
SHARE

Abstract

In this paper, We investigate the effects of one pass severe deformation, obtained by equal channel angular pressing (ECAP) process, using dies with channel angles of 90° and 120°, on hardness, texture, and corrosion behavior, of AA1370 aluminum alloy wire. A severe deformation, by ECAP process, leads to athinning of several diffraction peaks and an increase of their angular values; modifies the texture of material from pseudo-texture to mix texture; reduces the microhardness; modifies a part of localized corrosion towards generalized one; shifts the corrosion potential to negative values; and increases the values of open circuit potential (OCP). The deformation by ECAP process induces fragmentation of parts of intermetallic particles, and reduction of grains size. The imprisoned air, between the channel wall of the die and the wire, creates microporosities in the deformed samples.

To get access to this content you need the following product:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

  • über 69.000 Bücher
  • über 500 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Finance + Banking
  • Management + Führung
  • Marketing + Vertrieb
  • Maschinenbau + Werkstoffe
  • Versicherung + Risiko

Testen Sie jetzt 15 Tage kostenlos.

Springer Professional "Wirtschaft"

Online-Abonnement

Mit Springer Professional "Wirtschaft" erhalten Sie Zugriff auf:

  • über 58.000 Bücher
  • über 300 Zeitschriften

aus folgenden Fachgebieten:

  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Finance + Banking
  • Management + Führung
  • Marketing + Vertrieb
  • Versicherung + Risiko




Testen Sie jetzt 15 Tage kostenlos.

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

  • über 50.000 Bücher
  • über 380 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Maschinenbau + Werkstoffe




Testen Sie jetzt 15 Tage kostenlos.

Literature
1.
go back to reference N. Zazi, “Effect of heat treatments on the microstructure, hardness and corrosion behavior of nondendritic AlSi9Cu3(Fe) cast alloy,” Mater. Sci. 19, No. 3, 258–263 (2013). N. Zazi, “Effect of heat treatments on the microstructure, hardness and corrosion behavior of nondendritic AlSi9Cu3(Fe) cast alloy,” Mater. Sci. 19, No. 3, 258–263 (2013).
2.
go back to reference R. Gravina, C. Josse, B. Viguier, A. Laurino, J. Alexis, A. E. Hughes, and C. Blanc, “Corrosion behaviour of AA 1370 strands for wires: Identification of the critical metallurgical parameters,” Corros. Sci. 134, 112–121 (2018). CrossRef R. Gravina, C. Josse, B. Viguier, A. Laurino, J. Alexis, A. E. Hughes, and C. Blanc, “Corrosion behaviour of AA 1370 strands for wires: Identification of the critical metallurgical parameters,” Corros. Sci. 134, 112–121 (2018). CrossRef
3.
go back to reference G. Nurislamova, X. Sauvage, M-Y. Murashkin, R. Islamgaliev, and R. Valiev, “Nanostructure and related mechanical properties of an Al–Mg–Si alloy processed by severe plastic deformation,” Philos. Mag. Lett. 88, No. 6, 459–466 (2008). CrossRef G. Nurislamova, X. Sauvage, M-Y. Murashkin, R. Islamgaliev, and R. Valiev, “Nanostructure and related mechanical properties of an Al–Mg–Si alloy processed by severe plastic deformation,” Philos. Mag. Lett. 88, No. 6, 459–466 (2008). CrossRef
4.
go back to reference A. S. Khan and C. S. Meredith, “Thermo-mechanical response of Al 6061 with and without equal channel angular pressing (ECAP),” Int. J. Plast. 26, No. 2, 189–203 (2010). CrossRef A. S. Khan and C. S. Meredith, “Thermo-mechanical response of Al 6061 with and without equal channel angular pressing (ECAP),” Int. J. Plast. 26, No. 2, 189–203 (2010). CrossRef
5.
go back to reference S. N. Lezhnev, I. E. Vokitina, and D. V. Kuis, “Evolution of microstructure and mechanical properties of composite aluminum-based alloy during ECAP,” Phys. Met. Metallogr. 119, No. 8, 810–815 (2018). CrossRef S. N. Lezhnev, I. E. Vokitina, and D. V. Kuis, “Evolution of microstructure and mechanical properties of composite aluminum-based alloy during ECAP,” Phys. Met. Metallogr. 119, No. 8, 810–815 (2018). CrossRef
6.
go back to reference A. P. Zhilyaev, I. Shakhova, A. Belyakov, R. Kaibyshev, and T. G. Langdon, “Wear resistance and electroconductivity in copper processed by severe plastic deformation,” Wear 305, Nos. 1–2, 89–99 (2013). CrossRef A. P. Zhilyaev, I. Shakhova, A. Belyakov, R. Kaibyshev, and T. G. Langdon, “Wear resistance and electroconductivity in copper processed by severe plastic deformation,” Wear 305, Nos. 1–2, 89–99 (2013). CrossRef
7.
go back to reference C. Xu and T. G. Langdon, “Influence of a round corner die on flow homogeneity in ECA pressing,” Scr. Mater. 48, No. 1, 1–4 (2003). CrossRef C. Xu and T. G. Langdon, “Influence of a round corner die on flow homogeneity in ECA pressing,” Scr. Mater. 48, No. 1, 1–4 (2003). CrossRef
8.
go back to reference M. Yu., Murashkin, E. V. Bobruk, A. R. Kil’mametov, and R. Z. Valiev, “Structure and mechanical properties of aluminum alloy 6061 subjected to equal-channel angular pressing in parallel channels,” Phys. Met. Metallogr. 108, No. 4, 415–423 (2009). CrossRef M. Yu., Murashkin, E. V. Bobruk, A. R. Kil’mametov, and R. Z. Valiev, “Structure and mechanical properties of aluminum alloy 6061 subjected to equal-channel angular pressing in parallel channels,” Phys. Met. Metallogr. 108, No. 4, 415–423 (2009). CrossRef
9.
go back to reference K. Hajizadeh, S. Ejtemaei, B. Eghbali, and K. J. Kurzydlowski, “Microstructure and mechanical properties of 1050 aluminum after the combined processes of constrained groove pressing and cold rolling,” Phys. Met. Metallogr. 121, No. 1, 72–77 (2020). CrossRef K. Hajizadeh, S. Ejtemaei, B. Eghbali, and K. J. Kurzydlowski, “Microstructure and mechanical properties of 1050 aluminum after the combined processes of constrained groove pressing and cold rolling,” Phys. Met. Metallogr. 121, No. 1, 72–77 (2020). CrossRef
10.
go back to reference M. Š. Musa and Z. Schauperl, “ECAP–New consolidation method for production of aluminium matrix composites with ceramic reinforcement,” Process. Appl. Ceram. 7, No. 2, 63–68 (2013). CrossRef M. Š. Musa and Z. Schauperl, “ECAP–New consolidation method for production of aluminium matrix composites with ceramic reinforcement,” Process. Appl. Ceram. 7, No. 2, 63–68 (2013). CrossRef
11.
go back to reference J. R. Davis, Corrosion of Aluminum and Aluminum Alloys (ASM International, Ohio, 1999). CrossRef J. R. Davis, Corrosion of Aluminum and Aluminum Alloys (ASM International, Ohio, 1999). CrossRef
12.
go back to reference D. Song, A-b. Ma., J-H. Jiang, P-H. Lin, and D.‑H. Yang, “Corrosion behavior of ultra-fine grained industrial pure Al fabricated by ECAP,” Trans. Nonferrous Met. Soc. China 19, No. 5, 1065–1070 (2009). CrossRef D. Song, A-b. Ma., J-H. Jiang, P-H. Lin, and D.‑H. Yang, “Corrosion behavior of ultra-fine grained industrial pure Al fabricated by ECAP,” Trans. Nonferrous Met. Soc. China 19, No. 5, 1065–1070 (2009). CrossRef
13.
go back to reference K. Gopala Krishna, K. Sivaprasad, T. S. N. Sankara Narayanan, and K. C. Hari Kumar, “Localized corrosion of an ultrafine grained Al–4Zn–2Mg alloy produced by cryorolling,” Corros. Sci. 60, 82–89 (2012). CrossRef K. Gopala Krishna, K. Sivaprasad, T. S. N. Sankara Narayanan, and K. C. Hari Kumar, “Localized corrosion of an ultrafine grained Al–4Zn–2Mg alloy produced by cryorolling,” Corros. Sci. 60, 82–89 (2012). CrossRef
14.
go back to reference K. D. Ralston, N. Birbilis, and C. H. J. Davies, “Revealing the relationship between grain size and corrosion rate of metals,” Scr. Mater. 63, No. 12, 1201–1204 (2010). CrossRef K. D. Ralston, N. Birbilis, and C. H. J. Davies, “Revealing the relationship between grain size and corrosion rate of metals,” Scr. Mater. 63, No. 12, 1201–1204 (2010). CrossRef
15.
go back to reference Z. Horita, T. Fujinami, M. Nemoto, and T. G. Langdon, “Equal-channel angular pressing of commercial aluminum alloys: grain refinement, thermal stability and tensile properties,” Metall. Mater. Trans. A 31, No. 3, 691–701 (2000). CrossRef Z. Horita, T. Fujinami, M. Nemoto, and T. G. Langdon, “Equal-channel angular pressing of commercial aluminum alloys: grain refinement, thermal stability and tensile properties,” Metall. Mater. Trans. A 31, No. 3, 691–701 (2000). CrossRef
16.
go back to reference J.G. Brunner, N. Birbilis, K. D. Ralston, and S. C. Virtanen, “Impact of ultrafine-grained microstructure on the corrosion of aluminium alloy AA2024,” Corros. Sci. 57, 209–214 (2012). CrossRef J.G. Brunner, N. Birbilis, K. D. Ralston, and S. C. Virtanen, “Impact of ultrafine-grained microstructure on the corrosion of aluminium alloy AA2024,” Corros. Sci. 57, 209–214 (2012). CrossRef
17.
go back to reference I-J. Son, H. Nakano, S. Oue, S. Kobayashi, H. Fukushima, and Z. Horita, “Effect of equal-channel angular pressing on pitting corrosion resistance of anodized aluminum-copper alloy,” Trans. Nonferrous Met. Soc. China 19, No. 4, 904–908 (2009). CrossRef I-J. Son, H. Nakano, S. Oue, S. Kobayashi, H. Fukushima, and Z. Horita, “Effect of equal-channel angular pressing on pitting corrosion resistance of anodized aluminum-copper alloy,” Trans. Nonferrous Met. Soc. China 19, No. 4, 904–908 (2009). CrossRef
18.
go back to reference C. Banjongprasert, A. Jak-Ra, C. Domrong, U. Patakham, W. Pongsaksawad, and T. Chairuangsri, “Characterization of an equal channel angular pressed Al–Zn–In alloy,” Arch. Metall. Mater. 60, No. 2, 887–890 (2015). CrossRef C. Banjongprasert, A. Jak-Ra, C. Domrong, U. Patakham, W. Pongsaksawad, and T. Chairuangsri, “Characterization of an equal channel angular pressed Al–Zn–In alloy,” Arch. Metall. Mater. 60, No. 2, 887–890 (2015). CrossRef
19.
go back to reference C. M. Allena, Kaq. O’Reilly, B. Canto, and P. V. Evans, “Intermetallic phase selection in 1XXX Al alloys,” Prog. Mater. Sci. 43, No. 2, 89–170 (1998). CrossRef C. M. Allena, Kaq. O’Reilly, B. Canto, and P. V. Evans, “Intermetallic phase selection in 1XXX Al alloys,” Prog. Mater. Sci. 43, No. 2, 89–170 (1998). CrossRef
20.
go back to reference B. Sundman, I. Ohnuma, N. Dupin, U. R. Kattner, and S. G. Fries, “An assessment of the entire Al–Fe system including D03 ordering,” Acta Mater. 57, No. 10, 2896–2908 (2009). CrossRef B. Sundman, I. Ohnuma, N. Dupin, U. R. Kattner, and S. G. Fries, “An assessment of the entire Al–Fe system including D03 ordering,” Acta Mater. 57, No. 10, 2896–2908 (2009). CrossRef
21.
go back to reference Z. Szklarska-Smialowska, ”Pitting corrosion of aluminum,” Corros. Sci. 41, No. 9, 1743–1767 (1999). CrossRef Z. Szklarska-Smialowska, ”Pitting corrosion of aluminum,” Corros. Sci. 41, No. 9, 1743–1767 (1999). CrossRef
22.
go back to reference W.R. Osório, L. C. Peixoto, P. R. Goulart, and A. Garcia, “Electrochemical corrosion parameters of as-cast Al–Fe alloys in a NaCl solution,” Corros. Sci. 52, No. 9, 2979–2993 (2010). CrossRef W.R. Osório, L. C. Peixoto, P. R. Goulart, and A. Garcia, “Electrochemical corrosion parameters of as-cast Al–Fe alloys in a NaCl solution,” Corros. Sci. 52, No. 9, 2979–2993 (2010). CrossRef
23.
go back to reference I. C. Noyan and J. B. Cohen, “Residual stress–measurement by diffraction and interpretation, Book Review, ” Cryst. Res. Technol. 24, No. 2, K37 (1989). CrossRef I. C. Noyan and J. B. Cohen, “Residual stress–measurement by diffraction and interpretation, Book Review, ” Cryst. Res. Technol. 24, No. 2, K37 (1989). CrossRef
24.
go back to reference U. Welzel, J. Ligot, P. Lamparter, A. C. Vermeulen, and E. J. Mittemeijer, “Stress analysis of polycrystalline thin films and surface regions by X-ray diffraction,” J. Appl. Crystallogr. 38, No. 1, 1–29 (2005). CrossRef U. Welzel, J. Ligot, P. Lamparter, A. C. Vermeulen, and E. J. Mittemeijer, “Stress analysis of polycrystalline thin films and surface regions by X-ray diffraction,” J. Appl. Crystallogr. 38, No. 1, 1–29 (2005). CrossRef
25.
go back to reference A. Baczmanski, P. Lipinski, A. Tidu, K. Wierzbanowski, and B. Pathiraj, “Quantitative estimation of incompatibility stresses and elastic energy stored in ferritic steel,” J. Appl. Crystallogr. 41, No. 5, 854–867 (2008). CrossRef A. Baczmanski, P. Lipinski, A. Tidu, K. Wierzbanowski, and B. Pathiraj, “Quantitative estimation of incompatibility stresses and elastic energy stored in ferritic steel,” J. Appl. Crystallogr. 41, No. 5, 854–867 (2008). CrossRef
26.
go back to reference T. H. De Keijser, J. I. Langford, E. J. Mittemeijer, and A. B. P. Vogels, “Use of the Voigt function in a single-line method for the analysis of X-ray diffraction line broadening,” J. Appl. Crystallogr. 15, No. 3, 308–314 (1982). CrossRef T. H. De Keijser, J. I. Langford, E. J. Mittemeijer, and A. B. P. Vogels, “Use of the Voigt function in a single-line method for the analysis of X-ray diffraction line broadening,” J. Appl. Crystallogr. 15, No. 3, 308–314 (1982). CrossRef
27.
go back to reference M. Marciszko, A. Baczmański, K. Wierzbanowski, M. Wrobel, C. Braham, J.-P. Chopart, A. Lodini, J. Bonarski, L. Tarkowski, and N. Zazi, “Application of multireflection grazing incidence method for stress measurements in polished Al–Mg alloy and CrN coating,” Appl. Surf. Sci. 266, 256–267 (2013). CrossRef M. Marciszko, A. Baczmański, K. Wierzbanowski, M. Wrobel, C. Braham, J.-P. Chopart, A. Lodini, J. Bonarski, L. Tarkowski, and N. Zazi, “Application of multireflection grazing incidence method for stress measurements in polished Al–Mg alloy and CrN coating,” Appl. Surf. Sci. 266, 256–267 (2013). CrossRef
28.
go back to reference L. Muresan, L. Oniciu, M. Froment, and G. Maurin, “Inhibition of lead electrocrystallization by organic additives,” Electrochim. Acta 37, No. 12, 2249–2254 (1992). CrossRef L. Muresan, L. Oniciu, M. Froment, and G. Maurin, “Inhibition of lead electrocrystallization by organic additives,” Electrochim. Acta 37, No. 12, 2249–2254 (1992). CrossRef
29.
go back to reference N. Zazi, J. P. Chopart, and A. Bilek, “Corrosion behavior and the weak-magnetic-field effect of aluminum packaging paper,” Mater. Technol. 50, No. 2, 165–173 (2016). N. Zazi, J. P. Chopart, and A. Bilek, “Corrosion behavior and the weak-magnetic-field effect of aluminum packaging paper,” Mater. Technol. 50, No. 2, 165–173 (2016).
30.
go back to reference A. Urrutia, S. Tumminello, D. G. Lamas, and S. Sommadossi, “X-Ray Characterization of Intermetallic Phases in Al/Ni Multilayer System,” International Congress of Science and Technology of Metallurgy and Materials, SAM—CONAMET 2013, Procedia Mater. Sci., No. 8, 1150 (2015). A. Urrutia, S. Tumminello, D. G. Lamas, and S. Sommadossi, “X-Ray Characterization of Intermetallic Phases in Al/Ni Multilayer System,” International Congress of Science and Technology of Metallurgy and Materials, SAM—CONAMET 2013, Procedia Mater. Sci., No. 8, 1150 (2015).
31.
go back to reference R. Ambat, A. J. Davenport, G. M. Scamans, and A. Afseth, “Effect of iron-containing intermetallic particles on the corrosion behaviour of aluminium,” Corros. Sci. 48, No. 11, 3455–3471 (2006). CrossRef R. Ambat, A. J. Davenport, G. M. Scamans, and A. Afseth, “Effect of iron-containing intermetallic particles on the corrosion behaviour of aluminium,” Corros. Sci. 48, No. 11, 3455–3471 (2006). CrossRef
32.
go back to reference J. O. Park, C.-H. Paik, and R. C. Alkire, “Scanning microsensors for measurement of local pH distributions at the microscale,” J. Electrochem. Soc. 143, No. 8, 174 (1996). CrossRef J. O. Park, C.-H. Paik, and R. C. Alkire, “Scanning microsensors for measurement of local pH distributions at the microscale,” J. Electrochem. Soc. 143, No. 8, 174 (1996). CrossRef
33.
go back to reference O. Seri and M. Imaizumi, “The dissolution of FeAl 3 intermetallic compound and deposition on aluminum in AlCl 3 solution,” Corros. Sci. 30, No. 11, 1121–1131 (1990). CrossRef O. Seri and M. Imaizumi, “The dissolution of FeAl 3 intermetallic compound and deposition on aluminum in AlCl 3 solution,” Corros. Sci. 30, No. 11, 1121–1131 (1990). CrossRef
34.
go back to reference M. Murayama, Z. Horita, and K. Hono, “Microstructure of two-phase Al–1.7 at % Cu all y deformed by equal-channel angular pressing,” Acta Mater. 49, No. 1, 21–29 (2001). CrossRef M. Murayama, Z. Horita, and K. Hono, “Microstructure of two-phase Al–1.7 at % Cu all y deformed by equal-channel angular pressing,” Acta Mater. 49, No. 1, 21–29 (2001). CrossRef
35.
go back to reference Z. Horita, K. Oh-ishi, and K. Kaneko, “Microstructure control using severe plastic deformation,” Sci. Technol. Adv. Mater. 7, No. 7, 649–654 (2006). CrossRef Z. Horita, K. Oh-ishi, and K. Kaneko, “Microstructure control using severe plastic deformation,” Sci. Technol. Adv. Mater. 7, No. 7, 649–654 (2006). CrossRef
Metadata
Title
Effects of ECAP with One Pass Severe Deformation on Microhardness, Texture, and Corrosion Behavior of AA1370 Aluminum Alloy Wire
Authors
Youcef Hadj Ali
Nacer Zazi
Hülya Durmus
Jean-Paul Chopart
Publication date
10-09-2021
Publisher
Pleiades Publishing
Published in
Physics of Metals and Metallography / Issue 13/2021
Print ISSN: 0031-918X
Electronic ISSN: 1555-6190
DOI
https://doi.org/10.1134/S0031918X20140021