Top

Journal of Materials Engineering and Performance

Published in:

12-01-2017

Effects of Laser Shock Processing on Fatigue Crack Growth in Ti-17 Titanium Alloy

Authors: Shuai Huang, Ying Zhu, Wei Guo, Peng Peng, Hongchao Qiao, Xungang Diao, Paul K. Chu

Published in: Journal of Materials Engineering and Performance | Issue 2/2017

Activate our intelligent search to find suitable subject content or patents.

search-config

AI-assisted search

Off

Abstract

The effects of laser shock processing (LSP) on the fatigue crack properties of Ti-17 titanium alloy are investigated. Surfaces on either side of a fatigue slot are subjected to LSP. The residual stress of the irradiated surface is measured by x-ray diffraction measurement and fatigue crack growth testing of the treated and untreated specimens. The fatigue fracture morphology and microstructure are examined by scanning electron microscopy and transmission electron microscopy. Proliferation and tangles of dislocations occur in the Ti-17, and the density of dislocation increases after the LSP treatment. The fine spacing of the fatigue striations indicates that LSP produces residual compressive stress on the irradiated surfaces which can delay micro-crack formation and expansion. Consequently, the fatigue propagation life of the specimen increases considerably after LSP.

previous article On the High Temperature Deformation Behaviour of 2507 Super Duplex Stainless Steel

next article Surface Modification of Textured Dielectrics and Their Wetting Behavior

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

inform now

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

inform now

W.F. Smith and J. Hashemi, Foundations of Materials Science and Engineering, 5th ed., McGraw-Hill, New York, 2011

K.-X. Wang, W.-D. Zeng, and Y.-Q. Zhao, Prediction of Dynamic Globularization of Ti-17 Titanium Alloy with Initial Microstructure During Hot Compression, Mater. Sci. Eng. A, 2010, 527, p 6193–6199CrossRef

H. Li, C. Zhang, H.-B. Liu, and M.-Q. Li, Bonding Interface Characteristic and Shear Strength of Diffusion Bonded Ti-17 Titanium Alloy, Trans. Nonferrous Met. Soc. China, 2015, 25, p 80–87CrossRef

H. Li, M.Q. Li, T. Han, and H.B. Liu, The Deformation Behavior of Isothermally Compressed Ti-17 Titanium Alloy in α+β field, Mater. Sci. Eng. A, 2012, 546, p 40–45CrossRef

X. Shi, W. Zeng, and Q. Zhao, The Effects of Lamellar Features on the Fracture Toughness of Ti-17 Titanium Alloy, Mater. Sci. Eng. A, 2015, 636, p 543–550CrossRef

A. Ebach-Stahl, C. Eilers, N. Laska, and R. Braun, Cyclic Oxidation Behaviour of the Titanium Alloys Ti-6242 and Ti-17 with Ti-Al-Cr-Y Coatings at 600 and 700 °C in Air, Surf. Coat. Technol., 2013, 223, p 24–31CrossRef

J.Z. Zhou, S. Huang, and L.D. Zou, Effects of Laser Peening on Residual Stresses and Fatigue Crack Growth Properties of Ti-6Al-4V Titanium Alloy, Opt. Lasers Eng., 2014, 52, p 189–194CrossRef

X.D. Ren, Q.B. Zhan, and H.M. Yang, The Effects of Residual Stress on Fatigue Behavior and Crack Propagation from Laser Shock Processing-Worked Hole, Mater. Des., 2013, 44, p 149–154CrossRef

A. Chahardehi, F.P. Brennan, and A. Steuwer, The Effect of Residual Stresses Arising from Laser Shock Peening on Fatigue Crack Growth, Eng. Fract. Mech., 2010, 77, p 2033–2039CrossRef

10.

D. Schnubel, M. Horstmann, and V. Ventzke, Retardation of Fatigue Crack Growth in Aircraft Aluminum Alloys via Laser Heating—Experiment Proof of Concept, Mater. Sci. Eng. A, 2012, 546, p 8–14CrossRef

11.

C. Rubio-Gonzalez, C. Felix-Martinez, and G. Gomez-Rosas, Effects of Laser Shock Processing on Fatigue Crack Growth of Duplex Stainless Steel, Mater. Sci. Eng. A, 2011, 528, p 914–919CrossRef

12.

S. Zabeen, M. Preuss, and P.J. Withers, Evolution of a Laser Shock Peened Residual Stress Field Locally with Foreign Object Damage and Subsequent Fatigue Crack Growth, Acta Mater., 2015, 83, p 216–226CrossRef

13.

A.K. Gujba and M. Medraj, Laser Peening Process and Its Impact on Materials Properties in Comparison with Shot Peening and Ultrasonic Impact Peening, Materials, 2014, 7, p 7925–7974CrossRef

14.

X. Hong, S. Wang, D. Guo, H. Wu, J. Wang, Y. Dai, X. Xia, and Y. Xie, Confining Medium and Absorptive Overlay: Their Effects on a Laser-Induced Shock Wave, Opt. Lasers Eng., 1989, 29, p 447–455CrossRef

15.

A. Kruusing, Underwater and Water-Assisted Laser Processing: Part 1—General Features, Steam Cleaning and Shock Processing, Opt. Lasers Eng., 2004, 41, p 307–327CrossRef

16.

X. Zhang, L. Chen, and Yu Xiaoliu, Effect of Laser Shock Processing on Fatigue Life of Fastener Hole, Trans. Nonferrous Met. Soc. China, 2014, 24, p 969–974CrossRef

17.

X.Q. Zhang, H. Li, and X.L. Yu, Investigation on Effect of Laser Shock Processing on Fatigue Crack Initiation and Its Growth in Aluminum Alloy Plate, Mater. Des., 2015, 65, p 425–431CrossRef

18.

C. Correa, L. Ruiz de Lara, and M. Diaz, Influence of Pulse Sequence and Edge Material Effect on Fatigue Life of Al2024-T351 Specimens Treated By Laser Shock Processing, Int. J. Fatigue, 2015, 70, p 196–204CrossRef

19.

F. Qi, P. Staron, and V. Ventzke, Effect of Local Laser Surfacing on the Fatigue Crack Propagation Rate of Al-Alloy 6065 and Its Laser Beam Weld, Proc. Mater. Sci., 2014, 3, p 1834–1840CrossRef

20.

S. Huang, J.Z. Zhou, and J. Sheng, Effects of Laser Energy on Fatigue Crack Growth Properties of 6061-T6 Aluminum Alloy Subjected to Multiple Laser Peening, Eng. Fract. Mech., 2013, 99, p 87–100CrossRef

21.

S. Huang, J.Z. Zhou, and J. Sheng, Effects of Laser Shock Peening with Different Coverage Areas on Fatigue Crack Growth Properties of 6061-T6 Aluminum Alloy, Int. J. Fatigue, 2013, 47, p 292–299CrossRef

22.

C.A.O. Ziwen, X.U. Haiying, and Z.O.U. Shikun, Investigation of Surface Integrity on TC17 Titanium Alloy Treated by Square-Spot Laser Shock Peening, Chin. J. Aeronaut., 2012, 25, p 650–656CrossRef

23.

S. Zou, S. Gong, and E. Guo, Surface Profile and Microstructure of Laser Peened Ti-6Al-4V, Rare Met., 2012, 31, p 430–433CrossRef

24.

B. Lin, C. Lupton, and S. Spanrad, Fatigue Crack Growth in Laser Shock Peened Ti-6Al-4V Aerofoil Specimens Due to Foreign Object Damage, Int. J. Fatigue, 2014, 59, p 23–33CrossRef

25.

C. Rubio-Gonzalez, J.L. Ocana, and G. Gomez-Rosas, Effect of Laser Shock Processing on Fatigue Crack Growth and Fracture Toughness of 6061-T6 Aluminum Alloy, Mater. Eng. A, 2004, 386, p 291–295CrossRef

26.

S. Kashef, A. Asgari, and T.B. Hilditch, Fatigue Crack Growth Behavior of Titanium Foams for Medical Applications, Mater. Sci. Eng. A, 2011, 528, p 1602–1607CrossRef

27.

C. Cellard, D. Retraint, M. Francois, E. Rouhaud, and D. Le Saunier, Laser Shock Peening of Ti-17 Titanium Alloy: Influence of Process Parameters, Mater. Sci. Eng. A, 2012, 532, p 362–372CrossRef

28.

C.H. Yang, P.D. Hougson, Q.C. Liu et al., Geometrical Effects on Residual Stresses in 7050-T7451 Aluminum Alloy Rods Subject to Laser Shock Processing, J. Mater. Process. Technol., 2008, 201, p 303–309CrossRef

29.

X.Q. Zhang, H. Li, X.L. Yu et al., Investigation on Effect of Laser Shock Processing on Fatigue Crack Initiation and Its Growth in Aluminum Alloy Plate, Mater. Des., 2015, 65, p 425–431CrossRef

30.

A. Chahardehi, F.P. Brennan, and A. Steuwer, The Effect of Residual Stresses Arising from LSP on Fatigue Crack Growth, Eng. Fract. Mech., 2010, 77, p 2033–2039CrossRef

31.

S. Huang, J.Z. Zhou, J. Sheng, K.Y. Luo et al., Effects of Laser Peening with Different Coverage Areas on Fatigue Crack Growth Properties of 6061-T6 Aluminum Alloy, Int. J. Fatigue, 2013, 47, p 292–299CrossRef

32.

J.Z. Lu, K.Y. Luo, Y.K. Zhang et al., Grain Refinement Mechanism of Multiple Laser Shock Processing Impacts on ANSI, 304 Stainless Steel, Acta Mater., 2010, 58, p 5354–5362CrossRef

33.

X. Chen, J. Yan, and A.M. Karlsson, On the Determination of Residual Stress and Mechanical Properties by Indentation, Mater. Sci. Eng. A, 2006, 416, p 139–149CrossRef

34.

S. Carlsson and P.L. Larsson, On the Determination of Residual Stress and Strain Fields by Sharp Indentation Testing. Part I: Theoretical and Numerical Analysis, Acta Mater., 2001, 49, p 2179–2191CrossRef

35.

C. Motz, O. Friedl, and R. Pippan, Fatigue Crack Propagation in Cellular Metals, Int. J. Fatigue, 2005, 27, p 1571–1581CrossRef

36.

O. Hatamleh, A Comprehensive Investigation on the Effects of Laser and Shot Peening on Fatigue Crack Growth in Friction Stir Welded AA 2195 Joints, Int. J. Fatigue, 2009, 31, p 974–988CrossRef

37.

G. Bussu and P.E. Irving, The Role of Residual Stress and Heat Affected Zone Properties on Fatigue Crack Propagation in Friction Stir Welded 2024-T351 Aluminium Joints, Int. J. Fatigue, 2003, 25, p 77–88CrossRef

38.

E. Maawad, Y. Sano, L. Wagner, and H.C. Brokmeier, Investigation of Laser Shock Peening on Residual Stress and Fatigue Performance of Titanium Alloys, Mater. Sci. Eng. A, 2012, 36, p 82–91CrossRef

39.

P. Li, S. Huang, and X. Haifeng, Numerical Simulation and Experiments of Titanium Alloy Engine Blades Based on Laser Shock Processing, Aerosp. Sci. Technol., 2015, 40, p 164–170CrossRef

40.

J.Z. Lu, K.Y. Luo, and Y.K. Zhang, Grain Refinement of LY2 Aluminum Alloy Induced by Ultra-High Plastic Strain During Multiple Laser Shock Processing Impacts, Acta Mater., 2010, 58, p 3984–3994CrossRef

41.

H. Li, Y. Liu, and M. Li, The Gradient Crystalline Structure and Microhardness in the Treated Layer of TC17 Via High Energy Shot Peening, Appl. Surf. Sci., 2015, 357, p 197–203CrossRef

42.

U. Trdan, M. Skarba, and J. Grum, Laser Shock Peening Effect on the Dislocation Transitions and Grain Refinement of Al-Mg-Si Alloy, Mater. Charact., 2014, 97, p 57–68CrossRef

Title: Effects of Laser Shock Processing on Fatigue Crack Growth in Ti-17 Titanium Alloy
Authors: Shuai Huang
Ying Zhu
Wei Guo
Peng Peng
Hongchao Qiao
Xungang Diao
Paul K. Chu
Publication date: 12-01-2017
Publisher: Springer US
Published in: Journal of Materials Engineering and Performance / Issue 2/2017
Print ISSN: 1059-9495
Electronic ISSN: 1544-1024
DOI: https://doi.org/10.1007/s11665-017-2507-z

Springer Professional

Abstract

Please log in to get access to your license.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Other articles of this Issue 2/2017

Microstructural and Mechanical Characterization of a Dissimilar Friction Stir-Welded AA5083-AA7B04 Butt Joint

A Study on Deformation Behavior of 304L Stainless Steel During and After Plate Rolling at Elevated Temperatures

Stress Relaxation in Tensile Deformation of 304 Stainless Steel

Effect of Multipass Friction Stir Processing on Mechanical and Corrosion Behavior of 2507 Super Duplex Stainless Steel

On the High Temperature Deformation Behaviour of 2507 Super Duplex Stainless Steel

New and Green Multi-component Scaling and Corrosion Inhibitor for the Cooling Water of Central Air Conditioners

Premium Partners