Top

Applied Composite Materials

Published in:

01-08-2016

Effects of Temperature, Oxidation and Fiber Preforms on Fatigue Life of Carbon Fiber-Reinforced Ceramic-Matrix Composites

Author: Li Longbiao

Published in: Applied Composite Materials | Issue 4/2016

Activate our intelligent search to find suitable subject content or patents.

search-config

AI-assisted search

Off

Abstract

In this paper, the effects of temperature, oxidation and fiber preforms on the fatigue life of carbon fiber-reinforced silicon carbide ceramic-matrix composites (C/SiC CMCs) have been investigated. An effective coefficient of the fiber volume fraction along the loading direction (ECFL) was introduced to describe the fiber architecture of preforms. Under cyclic fatigue loading, the fibers broken fraction was determined by combining the interface wear model and fibers statistical failure model at room temperature, and interface/fibers oxidation model, interface wear model and fibers statistical failure model at elevated temperatures in the oxidative environments. When the broken fibers fraction approaches to the critical value, the composites fatigue fracture. The fatigue life S–N curves and fatigue limits of unidirectional, cross-ply, 2D, 2.5D and 3D C/SiC composites at room temperature, 800 °C in air, 1100, 1300 and 1500 °C in vacuum conditions have been predicted.

previous article Modeling of Nonlinear Mechanical Behavior for 3D Needled C/C-SiC Composites Under Tensile Load

next article Lightning Strike Ablation Damage Characteristic Analysis for Carbon Fiber/Epoxy Composite Laminate with Fastener

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

inform now

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

inform now

Naslain, R.: Design, preparation and properties of non-oxide CMCs for application in engines and nuclear reactors: an overview. Compos Sci Technol 64, 155–170 (2004). doi:10.1016/S0266-3538(03)00230-6 CrossRef

Schmidt, S., Beyer, S., Knabe, H., Immich, H., Meistring, R., Gessler, A.: Advanced ceramic matrix composite materials for current and future propulsion system applications. Acta Astronaut 55, 409–420 (2004). doi:10.1016/j.actaastro.2004.05.052 CrossRef

DiCarlo, J.A., Van Roode, M.: Ceramic composite development for gas turbine hot section components. Proc ASME Turbo Expo Power Land Sea Air 2, 221–231 (2006)

Stephen, T.: General Electric primes CMC for turbine blades. Flight International, 2010. http://www.flightglobal.com/news/articles/general-electric-primes-cmc-for-turbine-blades-349834/

Gowayed, Y., Ojard, G., Santhosh, U., Jefferso, G.: Modeling of crack density in ceramic matrix composites. J Compos Mater 49, 2285–2294 (2015). doi:10.1177/0021998314545188 CrossRef

Li, L.B.: Fatigue hysteresis of carbon fiber-reinforced ceramic-matrix composites at room and elevated temperatures. Appl Compos Mater 23, 1–27 (2016). doi:10.1007/s10443-015-9448-1 CrossRef

Li, L.B.: Modeling fatigue hysteresis behavior of unidirectional C/SiC ceramic-matrix composite. Compos Part B 66, 466–474 (2014). doi:10.1016/j.compositesb.2014.06.014 CrossRef

Li, L.B.: Fatigue life prediction of carbon fiber-reinforced ceramic-matrix composites at room and elevated temperatures. Part I: Experimental analysis. Appl Compos Mater 23, 101–117 (2016). doi:10.1007/s10443-015-9446-3 CrossRef

Li, L.B.: Fatigue life prediction of carbon fiber-reinforced ceramic-matrix composites at room and elevated temperatures. Part II: Experimental comparisons. Appl Compos Mater 22, 961–972 (2015). doi:10.1007/s10443-015-9445-4.CrossRef

10.

Curtin, W.A., Ahn, B.K., Takeda, N.: Modeling brittle and tough stress–strain behavior in unidirectional ceramic matrix composites. Acta Mater 46, 3409–3420 (1998). doi:10.1016/S1359-6454(98)00041-X CrossRef

11.

Evans, A.G., Zok, F.W., McMeeking, R.M.: Fatigue of ceramic matrix composites. Acta Metall Mater 43, 859–875 (1995). doi:10.1016/0956-7151(94)00304-Z CrossRef

12.

Lee, S.S., Stinchcomb, W.W.: Damage mechanisms of cross-ply Nicalon/CAS-II laminate under cyclic tension. Ceram Eng Sci Proc 15, 40–48 (1994). doi:10.1002/9780470314500.ch5 CrossRef

13.

Lara-Curzio, E.: Analysis of oxidation-assisted stress-rupture of continuous fiber-reinforced ceramic matrix composites at intermediate temperatures. Compos Part A 30, 549–554 (1999). doi:10.1016/S1359-835X(98)00148-1 CrossRef

14.

Casas, L., Martinez-Esnaola, J.M.: Modelling the effect of oxidation on the creep behavior of fiber-reinforced ceramic matrix composites. Acta Mater 51, 3745–3757 (2003). doi:10.1016/S1359-6454(03)00189-7 CrossRef

15.

Li, L.B.: Fatigue damage models and life prediction of long-fiber-reinforced ceramic matrix composites. PhD Thesis, Nanjing University of Aeronautics and Astronautics, Nanjing, China, 2010.

16.

Shuler, S.F., Holmes, J.W., Wu, X.: Influence of loading frequency on the room-temperature fatigue of a carbon-fiber/SiC-matrix composite. J Am Ceram Soc 76, 2327–2336 (1993). doi:10.1111/j.1151-2916.1993.tb07772.x CrossRef

17.

Mall, S., Engesser, J.M.: Effects of frequency on fatigue behavior of CVI C/SiC at elevated temperature. Compos Sci Technol 66, 863–874 (2006). doi:10.1016/j.compscitech.2005.06.020 CrossRef

18.

Zhang, C.Y., Wang, X.W., Liu, Y.S., Wang, B., Han, D.: Tensile fatigue of a 2.5D-C/SiC composite at room temperature and 900°C. Mater. Design 49, 814–819 (2013). doi:10.1016/j.matdes.2013.01.076

19.

Yang, F.S.: Research on fatigue behavior of 2.5d woven ceramic matrix composites. Master Thesis, Nanjing: Nanjing University of Aeronautics and Astronautics, 2011.

20.

Du, S.M., Qiao, S.R., Ji, G.C., Han, D.: Tension-tension fatigue behavior of 3D-C/SiC composite at room temperature and 1300°C. J Mater Eng 9, 22–25 (2002)

21.

Liu, X.F.: Tension-tension fatigue behavior of 3D-C/SiC composite at elevated temperature. Master Thesis, Northwestern Polytechnic University 2003.

22.

Du, S.M., Qiao, S.R.: Tension-tension fatigue behavior of 3D-C/SiC composite at 1500°C. J Mater Eng 5, 34–36 (2011)

Title: Effects of Temperature, Oxidation and Fiber Preforms on Fatigue Life of Carbon Fiber-Reinforced Ceramic-Matrix Composites
Author: Li Longbiao
Publication date: 01-08-2016
Publisher: Springer Netherlands
Published in: Applied Composite Materials / Issue 4/2016
Print ISSN: 0929-189X
Electronic ISSN: 1573-4897
DOI: https://doi.org/10.1007/s10443-016-9486-3

Springer Professional

Abstract

Please log in to get access to your license.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Other articles of this Issue 4/2016

Meso-Scale Modeling to Characterize Moisture Absorption of 3D Woven Composite

Tension-Compression Fatigue of a Nextel™720/alumina Composite at 1200 °C in Air and in Steam

Forming Simulation of Thick AFP Laminates and Comparison with Live CT Imaging

Simulation of High Velocity Impact on Composite Structures - Model Implementation and Validation

A New Frangible Composite Canister Cover with the Function of Specified Direction Separation

Modeling the Effect of Multiple Matrix Cracking Modes on Cyclic Hysteresis Loops of 2D Woven Ceramic-Matrix Composites

Premium Partners