Top

Metallurgical and Materials Transactions A

Published in:

02-07-2020

Effects of Titanium Addition on the Microstructural and Mechanical Property Evolution of FeCrB Alloys

Authors: Gaopeng Xu, Kui Wang, Xianping Dong, Lei Yang, Haiyan Jiang, Qudong Wang, Wenjiang Ding

Published in: Metallurgical and Materials Transactions A | Issue 9/2020

Activate our intelligent search to find suitable subject content or patents.

search-config

AI-assisted search

Off

Abstract

Effects of Ti addition on the microstructural and mechanical property evolution of FeCrB alloys have been systematically studied through experiments and modeling. Microstructural analysis reveals that Ti addition can induce the formation of in situ nanoparticles which can be mainly divided into two categories based on their distribution types. The first are the interfacial ones accumulating on the boride surface to control their growth, while the second are the intragranular ones distributed in the matrix to reinforce the FeCrB alloys. Model predictions show that the nanoparticle-induced growth restriction is responsible for the microstructural refinement. The refined microstructure and reinforcing nanoparticles can lead to the enhanced mechanical properties of FeCrB alloys. When the Ti addition reaches 1.4 wt pct, the FeCrB alloy exhibits the most refined and homogeneous microstructure and thus the optimal performance with its microhardness, macrohardness, ultimate tensile strength, elongation, impact toughness, and the wear-resistant performance are increased by 31.9, 29.0, 39.7, 128.6, 27.3, and 350 pct, respectively, compared with the base alloy.

previous article The Influence of the Silicon Content on the Formation of Fe23B6 Metastable Phases in Fe65Co11−xB20SixZr2Hf2 Bulk Amorphous Alloys

next article Warm Deformation and Dynamic Strain Aging of a Nb-Cr Microalloyed Low-Carbon Steel

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

inform now

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

inform now

Available only for authorised users

[1] J. Xu, M.A. Bright, X.B. Liu and E. Barbero: Metall. Mater. Trans. A, 2007, vol. 38, pp. 2727-36.

[2] K. Zhang: Wear, 2003, vol. 255, pp. 545-555.

[3] R.F. Yang, P. Zhang and J.H. Wu: Mater. Sci. Eng. A, 2009, vol. 499, pp. 134-137.

[4] X.M. Zhang and W.P. Chen: Trans. Nonferrous Met. Soc. China, 2015, vol. 25, pp. 1715-31.

[5] L.F. Hou, Y.H. Wei, Y.G. Li, B.S. Liu, H.Y. Du and C.L. Guo: Eng. Failure Anal., 2013, vol. 33, pp. 457-464.

[6] B.S. Liu, Y.G. Wei, H.M. Li and L.F. Hou: Eng. Failure Anal., 2014, vol. 39, pp. 200-206.

[7] E. Yamaki, K. Ginestar and L. Martinelli: Corros. Sci., 2011, vol. 53, pp. 3075-85.

[8] J. Zhang, P. Hosemann and S. Maloy: J. Nucl. Mater., 2010, vol. 404, pp. 82-96.

[9] J. Song, X.M. Wang, T. DenOuden and Q.Y. Han: Metall. Mater. Trans. A, 2016, vol. 47, pp. 2609-15.

10.

[10] A.E. Miller and D.M. Maijer: Mater. Sci. Eng. A, 2006, vol. 435, pp. 100-111.

11.

[11] G.H. Awan and F.U. Hasan: Mater. Sci. Eng. A, 2008, vol. 472, pp. 157-165.

12.

[12] G.K. Mandal, R. Balasubramaniam and S.P. Mehrotra: Metall. Mater. Trans. A, 2009, vol. 40, pp. 637-645.

13.

[13] Y. Wang, J.D. Xing, H.G. Fu, Y.Z. Liu, K.H. Zheng, S.Q. Ma and Y.X. Jian: Corros. Sci., 2018, vol. 131, pp. 290-299.

14.

[14] Y. Wang, J.D. Xing, S.Q. Ma, B.C. Zheng, H.G. Fu and G.Z. Liu: Corros. Sci., 2016, vol. 112, pp. 25-35.

15.

[15] G.Z. Liu, J.D. Xing, S.Q. Ma, Y.L. He, H.G. Fu, Y. Gao, Y. Wang and Y.R. Wang: Metall. Mater. Trans. A, 2015, vol. 46, pp. 1900-07.

16.

[16] Z.C. Ling, W.P. Chen, T.W. Lu, B. Li and X.M. Zhang: Wear, 2019, vol. 430, pp. 81-93.

17.

[17] X.M. Zhang, W.P. Chen and H.F. Luo: Tribol. Lett., 2018, vol. 66, pp. 112.

18.

[18] S.Q. Ma, J.D. Xing, H.G. Fu, Y.M. Gao and J.J. Zhang: Acta Mater., 2012, vol. 60, pp. 831-843.

19.

[19] C. Baron, H. Springer and D. Raabe: Mater. Sci. Eng. A, 2018, vol. 724, pp. 142-147.

20.

[20] C. Baron, H. Springer and D. Raabe: Mater. Des., 2016, vol. 112, pp. 131-139.

21.

[21] S.Q. Ma, J.D. Xing, G.F. Liu, D.W. Yi, H.G. Fu, J.J. Zhang and Y.F. Li: Mater. Sci. Eng. A, 2010, vol. 527, pp. 6800-08.

22.

[22] Y.X. Jian, Z.F. Huang, J.D. Xing and Y.M. Gao: J. mater. Sci., 2018, vol. 53, pp. 5329-38.

23.

[23] J.J. Zhang, Y.M. Gao, J.D. Xing, S.Q. Ma, D.W. Yi and J.B. Yan: Tribol. Lett., 2011, vol. 44, pp. 31.

24.

[24] J. Lentz, A. Röttger, F. Großwendt and W. Theisen: Mater. Des., 2018, vol. 156, pp. 113-124.

25.

[25] Z.F. Huang, J.D. Xing and L. Lv: Mater. Charact., 2013, vol. 75, pp. 63-68.

26.

[26] Z.F. Huang, L. Chang, Z.W. Liu and Q.L. Zhang: Int. J. Mater. Res., 2017, vol. 108, pp. 424-426.

27.

[27] Y.X. Jian, Z.F. Huang, J.D. Xing and X.Z. Guo: J. Mater. Res., 2017, vol. 32, pp. 1718-26.

28.

[28] Y.X. Jian, Z.F. Huang, J.D. Xing, X.Z. Guo, Y. Wang and Z. Lv: Tribol. Lett., 2016, vol. 103, pp. 243-251.

29.

[29] B. Kowalczyk, K.J.M. Bishop, I. Lagzi, D.W. Wang, Y.H. Wei, S.B. Han and B. Grzybowski: Nat. Mater., 2012, vol. 11, pp. 227–32.

30.

[30] L.Y. Chen, J.Q. Xu, H. Choi, H. Konishi, S. Jin and X.C. Li: Nat. commun., 2014, vol. 5, pp. 1–9.

31.

[31] L.Y. Chen, J.Q. Xu and X.C. Li: Mater. Res. Lett., 2015, vol. 3, pp. 43-49.

32.

[32] E. Guo, S. Shuai, D. Kazantsev, S. Karagadde, A.B. Phillion, T. Jing, W.Z. Li and P.D. Lee: Acta Mater., 2018, vol. 152, pp. 127-137.

33.

[33] K. Wang, H.Y. Jiang, Y.W. Jia, H. Zhou, Q.D. Wang, B. Ye and W.J. Ding: Acta Mater., 2016, vol. 103, pp. 252-263.

34.

[34] K. Wang, H.Y. Jiang, Q.D. Wang, B. Ye and W.J. Ding: Metall. Mater. Trans. A, 2016, vol. 47, pp. 4788-94.

35.

[35] Y. Liu, B.H. Li, J. Li, L. He, S.J. Gao and T.G. Nieh: Mater. Lett., 2010, vol. 64, pp. 1299-1301.

36.

[36] B.H. Li, Y. Liu, J. Li and L. He: J. Mater. Process. Technol., 2010, vol. 210, pp. 91-95.

37.

[37] Y.F. Yang and Q.C. Jiang: Int. J. Refract. Met. Hard Mater., 2013, vol. 38, pp. 137-139.

38.

[38] D. Wang, P. Shanthraj, H. Springer and D. Raabe: Mater. Des., 2018, vol. 160, pp. 557-571.

39.

[39] R. Aparicio-Fernández, H. Springer, A. Szczepaniak, H. Zhang and D. Raabe: Acta Mater., 2016, vol. 107, pp. 38-48.

40.

[40] L. Zhong, Y.H. Xu, M. Hojamberdiev, J.B. Wang and J. Wang: Mater. Des., 2011, vol. 32, pp. 3790-95.

41.

[41] G.P. Xu, K. Wang, X.P. Dong, H.Y. Jiang, Q.D. Wang, B. Ye and W.J. Ding: Corros. Sci., 2020, vol. 163, 108276.

42.

[42] P. Villars and L.O. Calvert: Pearson’s Handbook of Crystallographic Data for Intermetallic Phases, ASM, OH, USA, 1985.

43.

[43] B. Bramfitt: Metall. Mater. Trans. B, 1970, vol. 1, pp. 1987-95.

44.

[44] H. Men and Z. Fan: Acta Mater., 2011, vol. 59, pp. 2704–12.

45.

[45] M. Kumar, R. Sasikumar and P.K. Nair: Acta Mater., 1998, vol. 46, pp. 6291–6303.

46.

[46] M. Qian, P. Cao, M.A. Easton, S.D. McDonald and D.H. StJohn: Acta Mater., 2010, vol. 58, pp. 3262–70.

47.

[47] Z. Fan, F. Gao, L. Zhou and S.Z. Lu: Acta Mater., 2018, vol. 152, pp. 248-257.

48.

[48] I. Maxwell and A. Hellawell: Acta Metall., 1975, vol. 23, pp. 229-237.

49.

[49] C. Zener: J. appl. Phys., 1949, vol. 20, pp. 950-953.

50.

[50] W. Yang, F. Liu, G.C. Yang, Z.F. Xu, J.H. Wang and Z.T. Wang: Thermochim. Acta, 2012, vol. 527, pp. 47-51.

51.

[51] H. Baker: ASM handbook: alloy phase diagrams, ASM international, OH, USA, 1992, pp. 281.

52.

Benxi Iron & Steel Co. (1977) Boron Steel. Metallurgical Industry Press, Beijing, pp. 2.

53.

[53] N. Bizmark, M.A. Ioannidis and D.E. Henneke: Langmuir, 2014, vol. 30, pp. 710-717.

54.

[54] K. Wang, H.Y. Jiang, Y.X. Wang, Q.D. Wang, B. Ye and W.J. Ding: Mater. Des., 2016, vol. 95, pp. 545-554.

55.

[55] N. Yüksel and S. Şahin: Mater. Des., 2014, vol. 58, pp. 491-498.

Title: Effects of Titanium Addition on the Microstructural and Mechanical Property Evolution of FeCrB Alloys
Authors: Gaopeng Xu
Kui Wang
Xianping Dong
Lei Yang
Haiyan Jiang
Qudong Wang
Wenjiang Ding
Publication date: 02-07-2020
Publisher: Springer US
Published in: Metallurgical and Materials Transactions A / Issue 9/2020
Print ISSN: 1073-5623
Electronic ISSN: 1543-1940
DOI: https://doi.org/10.1007/s11661-020-05899-7

Springer Professional

Abstract

Please log in to get access to your license.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Other articles of this Issue 9/2020

Thermal–Mechanical Working of Spark Plasma Sintered Preforms Fabricated from Aluminum 2219 Powder

Enhanced Degradation in Grain Refinement of Inoculated 2024 Al Alloy in Steady Magnetic field

Processing and Properties of Medium-Mn TRIP Steel to Obtain a Two-Stage TRIP Behavior

Microstructural Evolution During Deformation of a QP980 Steel

Analysis of Martensitic Transformation Plasticity Under Various Loadings in a Low-Carbon Steel: An Elastoplastic Phase Field Study

The Ecosystem of Research, Education, and Community

Premium Partners