Top

Metals and Materials International

Published in:

02-03-2024

Effects of Ultrasonic Surface Rolling Processing on the Surface Properties of 4Cr13 Stainless Steel

Authors: Xiaoshuang Luo, Dan Jia, Shengpeng Zhan, Jiesong Tu, Yinhua Li, Tian Yang, Haitao Duan

Published in: Metals and Materials International | Issue 8/2024

Activate our intelligent search to find suitable subject content or patents.

search-config

AI-assisted search

Off

Abstract

Ultrasonic surface rolling processing (USRP) was applied on 4Cr13 stainless steel. Microstructure observations of the USRP sample surface indicate that the processing can exhibit significant plastic deformation, with a maximum depth of about 253.4 μm, and refine the average surface grain to 0.5 μm. In contrast to the untreated sample, the USRP sample has a minimum surface roughness Ra of 80.1 nm, which is 93.1% lower. Tests of mechanical properties showed a 37.0% increase in the maximum surface microhardness for USRP samples. The residual compressive stress can be as high as-484.4 MPa. It has also been found that USRP can enhance tribological properties under different normal loads. Adhesion oxidation wear dominate in the process of dry-sliding friction based on the surface/interface analysis. The improvement in antifriction and wear resistance is mainly attributed to the reduction in surface roughness and the increase in mechanical properties after USRP treatment.

Graphical Abstract

previous article Effect of Solidification Cooling Rates and Subsequent Homogenization Treatment on Mn–Cr–Mo Element Segregation in Oil Casing Steels

next article Texture Analyses and Mechanical Behavior of a High-Mn Steel Subjected to Different Pass Number of Simple Shear

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

inform now

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

inform now

Z.Y. Jia, J.W. Ma, D.N. Song, F.J. Wang, W. Liu, Int. J. Mach. Tool Manuf. 125, 34–54 (2018). https://doi.org/10.1016/j.ijmachtools.2017.10.008CrossRef

A. Panda, Š Olejárová, J. Valíček, J. Valíček, M. Harničárová, Int. J. Adv. Manuf. Tech. 97, 401–411 (2018). https://doi.org/10.1007/s00170-018-1871-7CrossRef

Y.F. Li, C. Chen, J. Ranabhat, Y.F. Shen, Rare Met. 42, 1343–1352 (2023). https://doi.org/10.1007/s12598-017-0988-4CrossRef

M.T. Tsai, J.C. Huang, W.Y. Tsai, T.H. Choua, C.F. Chen, T.H. Lid, J.S.C. Jang, Intermetallics 93, 113–121 (2018). https://doi.org/10.1016/j.intermet.2017.11.018CrossRef

S. Benafia, D. Retraint, S. Yapi Brou, B. Panicauda, J.L. Grosseau Poussard, Corros. Sci. 136, 188–200 (2018). https://doi.org/10.1016/j.corsci.2018.03.007CrossRef

L. Carneiro, X.G. Wang, Y.Y. Jiang, Int. J. Fatigue 134, 105469 (2020). https://doi.org/10.1016/j.ijfatigue.2019.105469CrossRef

G.S. Dong, B. Gao, Z.B. Wang, Int. J. Fatigue 168, 107425 (2023). https://doi.org/10.1016/j.ijfatigue.2022.107425CrossRef

D. Meyer, M. Hettig, N. Mensching, J. Manuf. Mater. Process. 5, 98 (2021). https://doi.org/10.3390/jmmp5030098CrossRef

J.Y. Zhang, Y.X. Jian, X.Z. Zhao, D. Meng, F.S. Pane, Q.Y. Han, J. Magnes. Alloy. 9, 1187–1200 (2021). https://doi.org/10.1016/j.jma.2020.11.012CrossRef

10.

S. Manchoul, R. Seddik, R. Grissa, R. Ben Sghaier, R. Fathallah, Int. J. Adv. Manuf. Technol. 95, 3437–3451 (2018). https://doi.org/10.1007/s00170-017-1450-3CrossRef

11.

T. Persenot, A. Burr, E. Plancher, J.Y. Buffièrea, R. Dendievel, G. Martin, Addit. Manuf. 28, 821–830 (2019). https://doi.org/10.1016/j.addma.2019.06.014CrossRef

12.

S.P. Chenakin, V.S. Filatova, I.N. Makeeva, M.A. Vasylyev, Appl. Surf. Sci. 408, 11–20 (2017). https://doi.org/10.1016/j.apsusc.2017.03.004CrossRef

13.

S.P. Chenakin, B.N. Mordyuk, N.I. Khripta, Appl. Surf. Sci. 470, 44–55 (2019). https://doi.org/10.1016/j.apsusc.2018.11.116CrossRef

14.

D.A. Polonyankin, A.A. Fedorov, A.I. Blesman, S.N. Nesov, Opt. Laser Technol. 150, 107948 (2022). https://doi.org/10.1016/j.optlastec.2022.107948CrossRef

15.

B.K. Pant, A.H.V. Pavan, R.V. Prakash, M. Kamaraj, Int. J. Fatigue 93, 38–50 (2016). https://doi.org/10.1016/j.ijfatigue.2016.08.005CrossRef

16.

S.J. Liu, Y. Kim, J.S. Jung, S. Bae, S. Jeong, K. Shin, Materials 16, 1802 (2023). https://doi.org/10.3390/ma16051802CrossRefPubMedPubMedCentral

17.

H. Soyama, C. Kuji, Y.L. Liao, J. Magnes. Alloys 11, 1592–1607 (2023). https://doi.org/10.1016/j.jma.2023.04.004CrossRef

18.

Y. Efe, I. Karademir, F. Husem, E. Maleki, R. Karimbaev, A. Amanov, O. Unal, Appl. Surf. Sci. 528, 146922 (2020). https://doi.org/10.1016/j.apsusc.2020.146922CrossRef

19.

X. Luo, X.P. Ren, Q. Jin, H.T. Qu, H.L. Hou, J. Mater. Res. Technol. 13, 1586–1598 (2021). https://doi.org/10.1016/j.jmrt.2021.05.065CrossRef

20.

Y.K. Jo, Y.W. Gil, D.S. Shim, Y.S. Pyun, S.H. Park, Int. J. Pr. Eng. Man-GT. 8, 533–546 (2021). https://doi.org/10.1007/s40684-020-00303-6CrossRef

21.

L. Tan, D.H. Zhang, C.F. Yao, J.X. Ren, J. Mater. Eng. Perform. 28, 6736–6745 (2019). https://doi.org/10.1007/s11665-019-04418-zCrossRef

22.

M.K. Khan, M.E. Fitzpatrick, Q.Y. Wang, Y.S. Pyoun, A. Amanov, Fatigue Fract. Eng. Mater. Struct. 41, 844–855 (2018). https://doi.org/10.1111/ffe.12732CrossRef

23.

A. Kishore, M. John, A.M. Ralls, S.A. Jose, U.B. Kuruveri, P.L. Menezes, Nanomaterials 12, 1415 (2022). https://doi.org/10.3390/nano12091415CrossRefPubMedPubMedCentral

24.

M. John, A.M. Ralls, S.C. Dooley, A.K.V. Thazhathidathil, A.K. Perka, U.B. Kuruveri, P.L. Menezes, Appl. Sci. 11, 10986 (2021). https://doi.org/10.3390/app112210986CrossRef

25.

X.X. Li, X. Wang, B.Q. Chen, M.Y. Gao, C. Jiang, H.X. Yuan, X.H. Zhang, T.X. Liang, Vacuum 209, 111819 (2023). https://doi.org/10.1016/j.vacuum.2023.111819CrossRef

26.

G. Li, F. Meng, W. Zhang, JOM 75, 1739–1749 (2023). https://doi.org/10.1007/s11837-023-05776-9CrossRef

27.

P.T. Liu, R. Wang, X.D. Liu, R.M. Ren, Mater. Eng. Perform. 30, 1270–1279 (2021). https://doi.org/10.1007/s11665-020-05444-yCrossRef

28.

G.B. Li, J. Chen, D.L. Guan, Tribol. Int. 43, 2216–2221 (2010). https://doi.org/10.1016/j.triboint.2010.07.004CrossRef

29.

X.S. Luo, H.T. Duan, J. Li, S.P. Zhan, D. Jia, J.S. Tu, Y.H. Li, Y.P. Chen, Met. Mater. Int. 28, 988–997 (2022). https://doi.org/10.1007/s12540-020-00937-wCrossRef

30.

A. Amanov, I.S. Cho, Y.S. Pyun, Appl. Surf. Sci. 388, 185–195 (2016). https://doi.org/10.1016/j.apsusc.2016.01.237CrossRef

31.

X.C. Xu, D.X. Liu, X.H. Zhang, C.S. Liu, D. Liu, J. Mater. Sci. Technol. 40, 88–98 (2020). https://doi.org/10.1016/j.jmst.2019.08.030CrossRef

32.

X.F. Teng, Y.F. Jia, C.Y. Gong, C.C. Zhang, X.C. Zhang, S.T. Tu, Sci. Rep. 11, 17840 (2021). https://doi.org/10.1038/s41598-021-97255-xCrossRefPubMedPubMedCentral

33.

T. Inoue, Z. Horita, H. Somekawa, K. Ogawa, Acta Mater. 56, 6291–6303 (2008). https://doi.org/10.1016/j.actamat.2008.08.042CrossRef

34.

A. Amanov, I.S. Cho, Y.S. Pyoun, C.S. Lee, I.G. Park, Wear 286–287, 136–144 (2012). https://doi.org/10.1016/j.wear.2011.06.001CrossRef

35.

C. Ye, A. Telang, A.S. Gill, S. Sergey, I. Yaakov, Z. Kai, M.K.W. Jörg, Z. Zhong, Q. Dong, R.M. Seetha, V.K. Vijay, Mat. Sci. Eng. A 613, 274–288 (2014). https://doi.org/10.1016/j.msea.2014.06.114CrossRef

36.

Z.Y. Zhou, Q.Y. Zheng, C. Ding, J.Y. Yan, G.J. Peng, Z.Y. Piao, J. Mater. Res. Technol. 13, 1068–1082 (2021). https://doi.org/10.1016/j.jmrt.2021.05.038CrossRef

37.

W. Guo, R.J. Sun, B.W. Song, Z.G. Che, B. Li, C. Guo, L. Liu, P. Peng, Surf. Coat. Tech. 349, 503–510 (2018). https://doi.org/10.1016/j.surfcoat.2018.06.020CrossRef

38.

C.H. Ma, J.H. Huang, H. Chen, Thin Solid Films 418, 73–78 (2002). https://doi.org/10.1016/S0040-6090(02)00680-6CrossRef

39.

Y. Zou, J.K. Li, X. Liu, T.T. He, J.S. Lu, D.L. Li, Y. Li, Surf. Coat. Tech. 412, 127012 (2021). https://doi.org/10.1016/j.surfcoat.2021.127012CrossRef

Title: Effects of Ultrasonic Surface Rolling Processing on the Surface Properties of 4Cr13 Stainless Steel
Authors: Xiaoshuang Luo
Dan Jia
Shengpeng Zhan
Jiesong Tu
Yinhua Li
Tian Yang
Haitao Duan
Publication date: 02-03-2024
Publisher: The Korean Institute of Metals and Materials
Published in: Metals and Materials International / Issue 8/2024
Print ISSN: 1598-9623
Electronic ISSN: 2005-4149
DOI: https://doi.org/10.1007/s12540-024-01642-8

Springer Professional

Abstract

Graphical Abstract

Please log in to get access to your license.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Other articles of this Issue 8/2024

Effects of Carbon Nanotubes and Nickel-Plated Carbon Nanotubes on the Microstructure and Mechanical Properties of AlCoCrFeNiCu High Entropy Alloy

High Temperature Melt Viscosity Prediction Model Based on BP Neural Network

Change in Failure Behavior and Fatigue Life of Single-Crystal Ni-Based Superalloys Under Thermomechanical Fatigue Loading

Effect of Solution Annealing Temperature on Liquation Cracking Susceptibility of Alloy 617M

Effect of Silicide and α2 Phase on the Creep Behavior of TC25G Alloy at High Temperature

A Practical Inverse Identification of Johnson–Cook Parameters at Intermediate Strain Rates Using Split Hopkinson Pressure Bar Test