Top

Metallurgist

Published in:

25-07-2023

Efficiency Gains When Using Activated Mill Tailings in Underground Mining

Authors: V. S. Brigida, V. I. Golik, R. V. Klyuev, L. B. Sabirova, A. R. Mambetalieva, Yu. I. Karlina

Published in: Metallurgist | Issue 3-4/2023

Activate our intelligent search to find suitable subject content or patents.

search-config

AI-assisted search

Off

Abstract

Global challenges, including increased consumption of mineral raw materials, climatic changes, and the exhaustibility of reserves, increase the relevance of mineral mining problems. In the article, the issue of the comprehensive mining waste utilization is considered. The experimental results confirm the effect caused by the mechanochemical activation of metal-containing geomaterials under high-energy impacts, increasing the recovery of useful components, as considerations concerning the time-spatial flow of non-linear manifestations during goaf formation and the properties of activated binders based on recycled materials in filling mixtures.

previous article Improving the Efficiency of Refining Copper Scrap Melt Via Steam-Air Oxidation Based on Mathematical Modeling and Experimental Investigations

next article Metallurgist Volume 67, Number 4

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

inform now

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

inform now

B. Kříbek, I. Nyambe, O. Sracek, M. Mihaljevič, and I. Knésl, “Impact of mining and ore processing on soil, drainage and vegetation in the Zambian copperbelt mining districts: a review,” Minerals, 13, Art. N. 384; DOI: https://doi.org/10.3390/min13030384.

M. M. Khairutdinov, P. A. Kaung, Z. Ya. Chzho, and Yu. S. Tyulyaeva, “Providing ecological safety with the introduction of resource-renewing technologies,” Bezopasnost’ Truda v Promyshlennosti, No. 5, 57–62 (2022); DOI: https://doi.org/10.24000/0409-2961-2022-5-57-62.CrossRef

L. R. Adrianto, L. Ciacci, S. Pfister, and S. Hellweg, “Toward sustainable reprocessing and valorization of sulfidic copper tailings: Scenarios and prospective LCA,” Science of the Total Environment, 871, Art. No. 162038; DOI: https://doi.org/10.1016/j.scitotenv.2023.162038.

T. N. Aleksandrova, N. M. Litvinova, A. V. Aleksandrov, S. A. Korchevenkov, and R. V. Bogomyakov, “An analysis of noble metal losses and the rational methods of their decrease during the development of alluvial deposits,” Tsvetnye Metally, No. 5 (857), 11–15 (2014).

R. Ricky, S. Shanthakumar, and K. M. Gothandam, “A pilot-scale study of the integrated phycoremediation-photolytic ozonation based municipal solid waste leachate treatment process,” J. of Environmental Management, 323, Art. No. 116237; DOI: https://doi.org/10.1016/j.jenvman.2022.116237.

E. N. Shaforostova, O. V. Kosareva-Volod’ko, O. V. Belyankina, D. Y. Solovykh, E. S. Sazankova, E. I. Sizova, and D. A. Adigamov, “A tailing dump as industrial deposit; study of the mineralogical composition of tailing dump of the Southern Urals and the possibility of tailings re-development,” Resources, 12, 28 (2023); DOI: https://doi.org/10.3390/resources12020028.

M. K. Mensah, C. Drebenstedt, N. Hoth, I. F. Ola, P. U. Okoroafor, and E. D. Wiafe, “Artisanal gold mine spoil types within a common geological area and their variations in contaminant loads and human health risks,” Environmental Monitoring and Assessment, 195(2), Art. No. 312; DOI: https://doi.org/10.1007/s10661-023-10932-4.

D. Stumbea, “Preliminaries on pollution risk factors related to mining and ore processing in the Cu-rich polymetallic belt of Eastern Carpathians, Romania,” Environmental Science and Pollution Research, 20, 7643–7655 (2013); DOI: https://doi.org/10.1007/s11356-013-1656-3.CrossRef

M. Saunois, R. B. Jackson, P. Bousquet, B. Poulter, and J. G. Canadell, “The growing role of methane in anthropogenic climate change,” Environmental Research Letters, 11, Art. No. 120207; DOI: https://doi.org/10.1088/1748-9326/11/12/120207.

10.

V. S. Brigida, V. I. Golik, Yu. V. Dmitrak, and O. Z. Gabaraev, “The impact of situational geomechanical conditions influence to improving of the drainage rock-mass caved,” Proceedings of the Tula States University-Sciences of Earth, No. 2, 279–288 (2019); WOS: 000546576800026.

11.

F. S. M. Araujo, I. Taborda-Llano, E. B. Nunes, and R. M. Santos, “Recycling and reuse of mine tailings: A review of advancements and their implications,” Geosciences, 12, Art. No. 319; DOI: https://doi.org/10.3390/geosciences12090319.

12.

M. V. Rylnikova, “Harmonious development of mining industry, science, and higher miming education — the guarantee of the stability of Russian mining regions,” Ustoichivoe Razvitie Gornykh Territorii, 12, No. 1 (43), 154–161 (2020); DOI: https://doi.org/10.21177/1998-4502-2020-12-1-154-161.CrossRef

13.

C. D. Agor, E. M. Mbadike, and G. U. Alaneme, “Evaluation of sisal fiber and aluminum waste concrete blend for sustainable construction using adaptive neuro-fuzzy inference system,” Scientific Report, 13(1), Art. No. 2814; DOI: https://doi.org/10.1038/s41598-023-30008-0.

14.

R. V. Klyuev, I. I. Bosikov, A. V. Maier, and O. A. Gavrina, “Comprehensive analysis of using effective technologies to improve the sustainable development of the natural and technical system,” Ustoichivoe Razvitie Gornykh Territorii, No. 2, 283–290 (2020); DOI: https://doi.org/10.21177/1998-45022020-12-2-283-290.CrossRef

15.

J. Rybak, M. M. Khairutdinov, Ch. B. Kongar-Syuryun, and Yu. S. Tyulyaeva, “Resource-saving technologies for the development of mineral deposits,” Ustoichivoe Razvitie Gornykh Territorii, 13, No. 3(49), 405–415 (2021); DOI: https://doi.org/10.21177/1998-4502-2021-13-3-406-415.CrossRef

16.

N. J. Adero, C. Drebenstedt, E. N. Prokofeva, and A. V. Vostrikov, “Spatial data and technologies for geomonitoring of land use under aspect of mineral resource sector development,” Eurasian Mining, No. 1, 69–74 (2020); DOI: https://doi.org/10.17580/em.2020.01.14.CrossRef

17.

B. Pradhan, R. Jena, D. Talukdar, M. Mohanty, B. K. Sahu, A. K. Raul, and K. N. Abdul Maulud, “A new method to evaluate gold mineralisation-potential mapping using deep learning and an explainable artificial intelligence (Xai) model,” Remote Sensing, 14, Art. No. 4486; DOI: https://doi.org/10.3390/rs14184486.

18.

V. Litvinenko, I. Bowbrick, I. Naumov, and Z. Zaitseva, “Global guidelines and requirements for professional competencies of natural resource extraction engineers: Implications for ESG principles and sustainable development goals,” Journal of Cleaner Production, 338, Art. No. 130530; DOI: https://doi.org/10.1016/j.jclepro.2022.130530.

19.

M. V. Griazev, N. M. Kachurin, and V. I. Spirin, “Energy efficiency technologies of integrated coal and mining waste development in the Moscow coal basin in the context of secure and sustainable supply of raw materials in Central Russia,” Eurasian Mining, 2, 15–19 (2016); DOI: https://doi.org/10.17580/em.2016.02.04.CrossRef

20.

T. N. Aleksandrova, A. V. Aleksandrov, N. V. Nikolaeva, and A. O. Romashev, “Noble and rare metals in caustobilites and prospects for their extraction,” Fiziko-Tekhnicheskie Problemy Razrabotki Poleznykh Iskopaemykh, No. 6, 189–197 (2015).

21.

A. J. Whitworth, J. Vaughan, G. Southam, A. Van der Ent, P. N. Nkrumah, X. Ma, and A. Parbhakar-Fox, “Review on metal extraction technologies suitable for critical metal recovery from mining and processing wastes,” Minerals Engineering, 1, Art. No. 107537; DOI: https://doi.org/10.1016/j.mineng.2022.107537.

22.

V. I. Komashchenko, E. D. Vorob’ev, and Yu. I. Razorenov, “Concepts of metal recovery during the ore concentration waste disposal,” Izv. Tomskogo Politekhnicheskogo Un-ta. Inzhiniring Georesursov, 328(10), 18–24 (2017); URL: http://earchive.tpu.ru/handle/11683/43364.

23.

V. I. Golik, A. N. Doolin, M. A. Komissarova, and R. A. Doolin, “Evaluating the effectiveness of utilization of mining waste,” Intern. EUR Business Management, 9, No. 6, 1119–1123 (2015).

24.

G. Chen, J. Chen, and J. Peng, “Effect of mechanical activation on structural and microwave absorbing characteristics of high titanium slag,” Powder Technology, 286, 218–222 (2015); DOI: https://doi.org/10.1016/j.powtec.2015.08.021.CrossRef

25.

U. Kologrieva, A. Volkov, D. Zinoveev, I. Krasnyanskaya, P. Stulov, and D. Wainstein, “Investigation of vanadium containing sludge oxidation roasting process for vanadium extraction,” Metals, 11, Art. No. 100; DOI: https://doi.org/10.3390/met11010100.

26.

I. M. Gembitskaya and M. V. Gvozdetskaya, “Transformation of technological raw material grains during the production of fine powders,” Zapiski Gornogo Instituta, 249, 401–407 (2021); DOI: https://doi.org/10.31897/PMI.2021.3.9.CrossRef

27.

T. S. Yusupov, E. A. Kirillova, L. G. Shumskaya, V. P. Isupov, and N. Z. Lyakhov, “Improvement of flotation concentration of copper-nickel ores on the basis of selective destruction of mineral intergrowths by high-energy impact effects,” Khimiya v Interesakh Ustoichivogo Razvitiya, 4, 457–464 (2017); DOI: https://doi.org/10.15372/CSD20170413.CrossRef

28.

O. V. Yushkova, A. S. Yasinskiy, P. V. Polyakov, and V. V. Yushkov, “Use of mechanical activation to improve the performance of anode cover material,” Tsvetnye Metally, 1(925), Art. No. 5459; DOI: https://doi.org/10.17580/tsm.2020.01.08.

29.

V. I. Golik, Yu. V. Dmitrak, V. I. Komashchenko, and Yu. I. Razorenov, “Ecological aspects of storing ore concentration tailings in a mountainous region,” Ekologiya i Promyshlennost’ Rossii, 22, No. 6, 35–39 (2018); DOI: https://doi.org/10.18412/1816-03952018-6-35-39.CrossRef

30.

G. Tiu, Y. Ghorbani, N. Jansson, C. Wanhainen, and N.-J. Bolin, “Ore mineral characteristics as rate-limiting factors in sphalerite flotation: Comparison of the mineral chemistry (iron and manganese content), grain size, and liberation,” Minerals Engineering, 185, Art. No. 107705; DOI: https://doi.org/10.1016/j.mineng.2022.107705.

31.

T. I. Yushina, I. O. Krylov, V. S. Valavin, and V. V. Toan, “Old iron-bearing waste treatment technology,” Eurasian Mining, No. 1, 16–21 (2018); DOI: https://doi.org/10.17580/em.2018.01.04.CrossRef

32.

A. V. Rasskazova, A. G. Sekisov, M. S. Kirilchuk, and Y. A. Vasyanov, “Stage-activation leaching of oxidized copper-gold ore: Theory and technology,” Eurasian Mining, No. 1, 52–55 (2020); DOI: https://doi.org/10.17580/em.2020.01.10CrossRef

33.

D. Valeev, A. Shoppert, D. Dogadkin, T. Kuz’mina, and C. Salazar-Concha, “Extraction of Al and rare earth elements via high pressure leaching of boehmite-kaolinite bauxite using NH₄HSO₄ and H₂SO₄,” Hydrometallurgy, 215, Art. No. 105994 (2023); DOI: https://doi.org/10.1016/j.hydromet.2022.105994.

34.

V. I. Golik, Yu. V. Dmitrak, and V. S. Brigida, “Impact of duration of mechanochemical activation on enhancement of zinc leaching from polymetallic ore tailings,” Naukovyi Visnyk Natsionalnoho Hirnychoho Universytetu, 5, 47–54 (2020); DOI: https://doi.org/10.33271/NVNGU/2020-5/047.CrossRef

35.

J. Rybak, A. Adigamov, C. Kongar-Syuryun, M. Khayrutdinov, and Y. Tyulyaeva, “Renewable-resource technologies in mining and metallurgical enterprises providing environmental safety,” Minerals, 11-10, 1145 (2021); DOI: https://doi.org/10.3390/min11101145.CrossRef

36.

A. F. Al-Shawabkeh, M. O. Thalji, and T. M. Al-Rousan, “Using recycled plastic waste to improve the performance of hotmix asphalt,” Proc. of Institution of Civil Engineers: Waste and Resource Management (2022); DOI:https://doi.org/10.1680/jwarm.21.00013.

37.

H. Nikhade, R. RL. Birali, K. Ansari, M. A. Khan, H. M. Najm, S. M. Anas, M. Mursaleen, M. A. Hasan, and S. Islam, “Behavior of geomaterial composite using sugar cane bagasse ash under compressive and flexural loading,” Frontiers in Materials, 10, Art. No. 1108717; DOI: https://doi.org/10.3389/fmats.2023.1108717.

38.

D. Valeev and A. Kondratiev, “Current state of coal fly ash utilization: characterization and application,” Materials, 16, 27 (2023); DOI: https://doi.org/10.3390/ma16010027.CrossRef

39.

A. Elbendary, T. Aleksandrova, and N. Nikolaeva, “Influence of operating parameters on the flotation of the Khibiny apatitenepheline deposits,” J. of Materials Research and Technology, 8(6), 5080–5090 (2019); DOI: https://doi.org/10.1016/j.jmrt.2019.08.027.CrossRef

40.

A. Soleymani, M. A. Najafgholipour, and A. Johari, “An experimental study on the mechanical properties of solid clay brick masonry with traditional mortars,” J. of Building Engineering, 58, Art. No. 105057 (2022); DOI: https://doi.org/10.1016/j.jobe.2022.105057.

41.

N. S. Naveen, P. S. Kishore, S. Pujari, M. D. Silas Kumar, and K. Jogi, “Optimization through Taguchi and Artificial Neural Networks on thermal performance of a radiator using graphene based coolant,” Proc. of the Inst. of Mechanical Engineers A. Part J. of Power and Energy, 236(8), 1680–1693 (2022); DOI: https://doi.org/10.1177/09576509221097476.

42.

S. E. Zhang, G. T. Nwaila, J. E. Bourdeau, Y. Ghorbani, and E. J. M. Carranza, “Machine learning-based delineation of geodomain boundaries: A proof-of-concept study using data from the Witwatersrand Goldfields,” Natural Resources Research, (2023); DOI: https://doi.org/10.1007/s11053-023-10159-7.CrossRef

43.

V. Khosravi, A. Gholizadeh, P. C. Agyeman, F. D. Ardejani, S. Yousefi, and M. Saberioon, “Further to quantification of content, can reflectance spectroscopy determine the speciation of cobalt and nickel on a mine waste dump surface?,” Science of the Total Environment, 872, Art. No. 161996 (2023); DOI: https://doi.org/10.1016/j.scitotenv.2023.161996.

44.

X. Liu and C. Aldrich, “Assessing the influence of operational variables on process performance in metallurgical plants by use of Shapley value regression,” Metals, 12, Art. No. 1777, (2022); DOI: https://doi.org/10.3390/met12111777.

45.

X. Liu and C. Aldrich, “Explaining anomalies in coal proximity and coal processing data with Shapley and tree-based models,” Fuel, 335, Art. No. 126891 (2023); DOI: https://doi.org/10.1016/j.fuel.2022.126891.

46.

T. Trzepieciński, “Polynomial multiple regression analysis of the lubrication effectiveness of deep drawing quality steel sheets by eco-friendly vegetable oils,” Materials, 15, Art. No. 1151 (2022); DOI: https://doi.org/10.3390/ma15031151.

47.

S. Puchlerska, K. Żaba, J. Pyzik, T. Pieja, and T. Trzepieciński, “Statistical analysis and optimization of data for the design and evaluation of the shear spinning process,” Materials, 14, Art. No. 6099 (2021); DOI: https://doi.org/10.3390/ma14206099.

48.

V. I. Golik, Yu. I. Razorenov, V. S. Brigida, and O. G. Burdzieva, “Mechanochemical technology of metal recovery from mill tailings,” Izv. Tomskogo Politekhnicheskogo Un-ta. Inzhiniring Georesursov, 331(6), 175–183 (2020); DOI: https://doi.org/10.18799/24131830/2020/6/2687.CrossRef

49.

V. S. Morkun, N. V. Morkun, V. V. Tron’, S. N. Grishchenko, A. I. Suvorov, D. I. Paranyuk, and A. Yu. Serdyuk, “Reduction in the dimensionality of the spatial-temporal models of nonlinear dynamic processes of the ore concentration,” Izv. Tomskogo Politekhnicheskogo Un-ta. Inzhiniring Georesursov, 330(12), 151–167 (2019); DOI: https://doi.org/10.18799/24131830/2019/12/2416.

50.

51.

E. Iakovleva, M. Belova, A. Soares, and A. Rassõlkin, “On the issues of spatial modeling of non-standard profiles by the example of electromagnetic emission measurement data,” Sustainability (Switzerland), 14, Art. N. 574 (2022); DOI: https://doi.org/10.3390/su14010574.

52.

S. Palaniandy, “Impact of mechanochemical effect on chalcopyrite leaching,” Intern. J. of Mineral Processing, 136, 56–65 (2015); DOI: https://doi.org/10.1016/j.minpro.2014.10.005.CrossRef

53.

M. Minagawa, S. Hisatomi, T. Kato, G. Granata, and Ch. Tokoro, “Enhancement of copper dissolution by mechanochemical activation of copper ores: Correlation between leaching experiments and DEM simulations,” Advanced Powder Technology, 29(3), 471– 478 (2018); DOI: https://doi.org/10.1016/j.apt.2017.11.03.CrossRef

54.

H. Basturkcu, M. Achimovičová, M. Kaňuchová, and N. Acarkan, “Mechanochemical pretreatment of lateritic nickel ore with sulfur followed by atmospheric leaching,” Hydrometallurgy, 181, 43–52 (2018); DOI: https://doi.org/10.1016/j.hydromet.2018.08.016.CrossRef

55.

G. Bumanisa and D. Bajarea, “Compressive strength of cement mortar affected by sand micro filler obtained with collision milling in disintegrator,” Procedia Engineering, 172, 149–156 (2017); DOI: https://doi.org/10.1016/j.proeng.2017.02.037.CrossRef

56.

K. Dvořák, D. Dolák, D. Paloušek, L. Čelko, and D. Jech, “The effect of the wear of rotor pins on grinding efficiency in a highspeed disintegrator,” Materials Sci., 24(1), 29–34 (2018); DOI: https://doi.org/10.5755/j01.ms.24.1.17737.CrossRef

Title: Efficiency Gains When Using Activated Mill Tailings in Underground Mining
Authors: V. S. Brigida
V. I. Golik
R. V. Klyuev
L. B. Sabirova
A. R. Mambetalieva
Yu. I. Karlina
Publication date: 25-07-2023
Publisher: Springer US
Published in: Metallurgist / Issue 3-4/2023
Print ISSN: 0026-0894
Electronic ISSN: 1573-8892
DOI: https://doi.org/10.1007/s11015-023-01526-z

Springer Professional

Abstract

Please log in to get access to your license.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Other articles of this Issue 3-4/2023

Alloys Based on Orthorhombic Intermetallic Ti2AlNb: Phase Composition, Alloying, Structure, Properties

Additive Manufacturing of Titanium Aluminide Alloy Ti–Al–V–Nb–Cr–Gd by Selective Electron Beam Melting

Physical and Mechanical Properties of a Tungsten-Titanium-Cobalt Alloy Produced by Spark Plasma Sintering of Hard-Alloy Electroerosive Powders Produced in Kerosene

Behavior of Copper and Sulfur During High-Temperature Sulfurization Of Copper-Smelting Slags with Elemental Sulfur

Effect of Microstructure Parameters on Mechanical Properties of Cold-Rolled, Niobium-Microalloyed Steels after Continuous Annealing

Study of the Behavior of Phosphorus in the Production of Manganese Alloys Using Ores with a Low Manganese Content