Issue 3/2018
Content (75 Articles)
Bat algorithm-based back propagation approach for short-term load forecasting considering weather factors
S. Surender Reddy
Electrical properties and aquatic ecotoxicity effects of ZnS nanocrystals
Anis Fkiri, Nesrine Ben Saber, Badreddine Sellami, Aymen Selmi, Tariq Altalhi, Adil A. Gobouri, Ali Aldalbahi, Amine Mezni
Thermography and artificial intelligence in transformer fault detection
Gustavo Maciel dos Santos, Ronaldo R. B. de Aquino, Milde M. S. Lira
FPGA-in-the-loop simulation of a grid-connected photovoltaic system by using a predictive control
Marco Morales-Caporal, Jose Rangel-Magdaleno, Hayde Peregrina-Barreto, Roberto Morales-Caporal
Validation of single-phase transformer model for ferroresonance analysis
Javier A. Corea-Araujo, Juan A. Martinez-Velasco, Francisco González-Molina, Jose A. Barrado-Rodrigo, Luis Guasch-Pesquer, Ferley Castro-Aranda
Robust design of multimachine power system stabilizers based on improved non-dominated sorting genetic algorithms
T. Guesmi, A. Farah, H. Hadj Abdallah, A. Ouali
The problem of power supply for station with industrial robot in an automated welding process
Zbigniew Łukasik, Aldona Kuśmińska-Fijałkowska, Jacek Kozyra, Grzegorz Putynkowski, Krzysztof Woźny
Magnetic field generated by the flow of AC current through finite length nonmagnetic conductors (cylinders, tubes, coaxial cables)
J. M. Ferreira, Joaquim Anacleto
Backstepping control of a separately excited DC motor
Abdelkader Harrouz, Houcine Becheri, Ilhami Colak, Korhan Kayisli
Value assessment method for expansion planning of generators and transmission networks: a non-iterative approach
Neeraj Gupta, Mahdi Khosravy, Kumar Saurav, Ishwar K. Sethi, Ninoslav Marina
Control-oriented discrete-time large-signal model of phase-shift full-bridge DC–DC converter
Junaid Saeed, Ammar Hasan
HIL simulation of the DTC for a three-level inverter fed a PMSM with neutral-point balancing control based on FPGA
Omar Sandre-Hernandez, Jose Rangel-Magdaleno, Roberto Morales-Caporal, E. Bonilla-Huerta
A robust suboptimal control system design of chaotic PMSMs
Ton Duc Do, Y Nhu Do, Pham Duc Dai
Application of artificial neural network (ANN) to enhance power systems protection: a case of the Nigerian 330 kV transmission line
Obinna O. Kalu, T. C. Madueme
Phase fault attenuation in SRM based on generalized predictive control and filter design
Wellington A. Silva, Laurinda L. N. dos Reis
Evaluation of electromagnetic performance of emerging failures in electrical machines using computational simulation
Jose Rafael Guzman-Sepulveda, Rafael Guzman-Cabrera
Finite set model predictive control with on-line parameter estimation for active frond-end converters
Mohamed Abdelrahem, Christoph Michael Hackl, Ralph Kennel
Economic analysis of the energy consumption of a vending machine in a Mexican university building
Jesus Martinez-Patiño, Fernando Ireta-Moreno, Jose Merced Lozano-García, Ivan Abel Hernández-Robles, Carlos Rubio-Maya
A novel approach for determining optimal number and placement of static var compensator device to enhance the dynamic performance in power systems
Van Dai Le, Xinran Li, Peiqiang Li, Cao Quyen Le
Comments on ‘Current density in two parallel cylindrical conductors and their inductance’
J. A. Brandão Faria
Optimization of the temperature profile of a high-powered strontium bromide laser
Iliycho Petkov Iliev, Snezhana Georgieva Gocheva-Ilieva
A neural network-based estimation of the level of contamination on high-voltage porcelain and glass insulators
Luqman Maraaba, Zakariya Alhamouz, Hussain Alduwaish
Induction motor bearing faults diagnosis using Root-AR approach: simulation and experimental validation
Ameur Fethi Aimer, Ahmed Hamida Boudinar, Noureddine Benouzza, Azeddine Bendiabdellah
Sensorless control of switched reluctance drive with small DC-link capacitor for high-speed blowers
Nisai H. Fuengwarodsakul, Rik W. De Doncker
A comprehensive approach to determining the speed/torque relationships of eddy current brakes
Mehmet Onur Gulbahce, Derya Ahmet Kocabas
Emergency reserve activation considering demand-side resources and battery storage in a hybrid power system
S. Surender Reddy
Stability enhancement of PSS-UPFC installed power system by support vector regression
Mohammad Shoaib Shahriar, Md Shafiullah, Md Juel Rana
MMC-based solid-state transformer model including semiconductor losses
M. Ebrahim Adabi, Juan A. Martinez-Velasco
Impact of short-circuit impedance and tap changing method selection on the key-design parameters of core-form power transformers
Tamás Orosz, Zoltán Ádám Tamus
Adaptive direct torque control using Luenberger-sliding mode observer for online stator resistance estimation for five-phase induction motor drives
Hamdi Echeikh, Ramzi Trabelsi, Atif Iqbal, Mohamed Faouzi Mimouni
Development of a hot-spot temperature calculation method for the loss of life estimation of an ONAN distribution transformer
Ahmet Yigit Arabul, Ibrahim Senol
Optimal Sizing of Renewable Sources and Energy Storage in Low-Carbon Microgrid Nodes
Ivan Strnad, Rene Prenc
Optimal scheduling of electric vehicles considering uncertain RES generation using interval optimization
Abdelfatah Ali, David Raisz, Karar Mahmoud
Hybrid fault diagnosis algorithms for transmission lines
E. G. Silveira, H. R. Paula, S. A. Rocha, C. S. Pereira
Transient stability improvement: a review and comparison of conventional and renewable-based techniques for preventive and emergency control
Michael Pertl, Tilman Weckesser, Michel Rezkalla, Mattia Marinelli
The aspects of usage of four-layer windings in open-slot induction machines
Jan Laksar, Karel Hruska
Measurement of surface resistance of silicone rubber sheets under polluted and dry band conditions
Arshad, A. Nekahi, S. G. McMeekin, M. Farzaneh
Wave propagation effects induced in transmission pipelines by EMI from power lines
Piotr Czarnywojtek, Wojciech Machczyński
Parameter estimation of arbitrary-shape electrical cables through an image processing technique
F. A. Uribe, J. Flores
Application of technique on dual current mode control of power electronics converters
Srđan Lale, Milomir Šoja, Slobodan Lubura, Dragan Mančić
Improved teaching–learning-based optimization algorithm-based maximum power point trackers for photovoltaic system
Ahmed Fathy, Ibrahim Ziedan, Dina Amer
Soft switching passive snubber cell for family of PWM DC–DC converters
Yakup Sahin, Naim Suleyman Ting
A new brushless wound rotor synchronous machine using a special stator winding arrangement
Asif Hussain, Byung-il Kwon
Benchmarking simulation and theory of various PLLs produce orthogonal signals under abnormal electric grid conditions
M. Emin Meral, Doğan Çelik
Analytical design of Archimedean spiral coils used in inductive power transfer for electric vehicles application
Kunwar Aditya
Performance comparison of open-circuit fault-tolerant control strategies for multiphase permanent magnet machines for naval applications
Kamal Nounou, Mohamed Benbouzid, Khoudir Marouani, Jean Frédéric Charpentier, Abdelaziz Kheloui
Feasibility study on wind energy harvesting system implementation in moving trains
Venera Nurmanova, Mehdi Bagheri, Toan Phung, Sanjib Kumar Panda
Electromagnetic-based evaluation of different Halbach array topologies with gap consideration for the permanent magnet synchronous machines
Pedram Asef, Ramon Bargallo Perpina, M. R. Barzegaran, Tanushree Agarwal
Voltage distortion mitigation in a distributed generation-integrated weak utility network via a self-tuning filter-based dynamic voltage restorer
Samet Biricik, Shafiuzzaman K. Khadem, Soydan Redif, Malabika Basu
Torque and current enhancement based on dual open-end stator winding IM at fed by two 2-level cascaded inverters
Sami Guizani, Faouzi Ben Ammar
Lifetime analysis of semiconductor switch of MPPT for different photovoltaic technologies considering ambient conditions
Hakan Akca, Ramazan Ayaz, Ali Durusu
Modeling of distance protection logic for out-of-step condition in power system
Ali M. Eltamaly, Amer Nasr Abd Elghaffar
A mathematical model for the loadability analysis of a simultaneous AC–DC power transmission system
Mohammad Tawhidul Alam, Q. Ahsan
Modular high-gain DC–DC converter for renewable energy microgrids
B. Sri Revathi, Prabhakar Mahalingam
Using of four-switch three-phase converter in the structure DPC of DFIG under unbalanced grid voltage condition
Ali Izanlo, S. Asghar Gholamian, Mohammad Verij Kazemi
Integration of storage systems in distribution networks through multiobjective optimization
V. Fernão Pires, Rui Lopes, Dulce Costa
Influence of surface roughness of additive manufacturing polymer on surface flashover voltage
Shinya Iwata, Ryota Kitani
Broken rotor bar detection via four-band wavelet packet decomposition of motor current
Yalcin Cekic, Levent Eren
Analysis of thermophoresis and Brownian motion effect in heat transfer for nanofluid immersed distribution transformer
Anu Kumar Das, Saibal Chatterjee
A new capacitive rotary encoder based on analog synchronous demodulation
M. Karali, A. T. Karasahin, O. Keles, M. Kocak, M. A. Erismis
Short-term electrical load forecasting using radial basis function neural networks considering weather factors
Surender Reddy Salkuti
A new fault detection approach for nonlinear Lipschitz systems with optimal disturbance attenuation level and Lipschitz constant
Mohammad Ghasem Kazemi, Mohsen Montazeri
Controller design for integrating processes with inverse response and dead time based on standard forms
Ibrahim Kaya
Application of bacteria foraging algorithm for modular multilevel converter-based microgrid with effect of wind power
Suresh Govindugari Venkata, V. Ganesh, Sreedhar Madichetty
Improved adaptive notch filter-based active damping method for shunt active power filter with LCL-filter
Mehmet Büyük, Adnan Tan, Mehmet Tümay
Simulation and testing of single-supply back-to-back high-power synchronous machines
A. Campeanu, I. Vlad, S. Enache, T. Cimpeanu
LVCI approach for optimal allocation of distributed generations and capacitor banks in distribution grids based on moth–flame optimization algorithm
Mohamed A. Tolba, Ahmed A. Zaki Diab, Vladimir N. Tulsky, Almoataz Y. Abdelaziz
Unified power flow analysis of string current diverters
Matthias Kasper, Dominik Bortis, Johann W. Kolar
Analysis of influence of third spatial harmonic on currents and torque of multi-phase synchronous machine with permanent magnets
L. Schreier, J. Bendl, M. Chomat
Solving power transmission line routing problem using improved genetic and artificial bee colony algorithms
Hasan Eroğlu, Musa Aydin
Analysis of faults in active distribution network with and without synchronous generator using instantaneous symmetrical components in time domain
Vladica Mijailović, Dragan Ćetenović, Aleksandar Ranković, Predrag Petrović, Dimitrije Rozgić
Behavior of nine levels NPC three-phase inverter topology interfacing photovoltaic system to the medium electric grid under variable irradiance
Rabiaa Mechouma, Hamza Mebarki, Boubekeur Azoui
Mechanism research on active power fluctuation caused by steam turbine valve test
Jiasheng Wang, Qinfeng Ma, Jingliang Zhong, Xiaolong Gou
Comparison of properties of two basic variants of combined star-delta stator winding of induction machines
L. Schreier, J. Bendl, M. Chomat