Top

Metals and Materials International

Published in:

29-02-2024

Enhanced Interfacial Joining Strength of Mg/Ti Bimetal Casting via 3D-Printed Ti-Based Lattice Material

Authors: Yuanbing Wu, Jianhua Zhao, Likun Yu, Cheng Gu

Published in: Metals and Materials International | Issue 8/2024

Activate our intelligent search to find suitable subject content or patents.

search-config

AI-assisted search

Off

Abstract

This study innovatively joins magnesium and titanium alloys by incorporating a 3D-printed lattice structure into a magnesium alloy melt via compound casting. Simulation results highlight the significant effect of the length-to-diameter ratio (l/d_s) and node-to-strut diameter ratio (d_n/d_s) on joint strength, with the inclination angle (ω) deemed negligible. X-ray microcomputed tomography reveals a minimal 0.048% porosity in the bimetal joint with a cell dimension of 9 mm, prepared at a casting temperature of 730 °C. Experimental validation affirms the optimized lattice structure yielding impressive Mg/Ti composite joining strength (95.4 MPa) and fracture energy (8987 J). This optimal structure with l/d_s, d_n/d_s, and ω of 5.8, 2.4, and 56° respectively, leverages rough surface texture from selective laser melting, promoting a serrated interface for enhanced Mg/Ti bimetallic bonding.

Graphical Abstract

previous article Effect of Solution Annealing Temperature on Liquation Cracking Susceptibility of Alloy 617M

next article Influence of Patterns on Mechanical Properties of Ultrasonically Welded Joints in Copper Substrate and Wire

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

inform now

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

inform now

Available only for authorised users

L. Raimondi, L. Tomesani, L. Donati, A. Zucchelli, Lattice material infiltration for hybrid metal-composite joints: manufacturing and static strength. Compos. Struct. 269, 114069 (2021). https://doi.org/10.1016/j.compstruct.2021.114069CrossRef

F. Hua, H. Song, T. Sun, J. Li, Inter-diffusion based analytical model for growth kinetics of IMC layers at roll bonded Cu/Al interface during annealing process. Met. Mater. Int. 26, 333–345 (2020). https://doi.org/10.1007/s12540-019-00333-zCrossRef

X. Cheng, Y. Gao, H. Fu, J. Xing, B. Bai, Microstructural characterization and properties of Al/Cu/steel diffusion bonded joints. Met. Mater. Int. 16, 649–655 (2010). https://doi.org/10.1007/s12540-010-0820-2CrossRef

J.L. Song, S.B. Lin, C.L. Yang, C.L. Fan, Effects of Si additions on intermetallic compound layer of aluminum–steel TIG welding–brazing joint. J. Alloys Compd. 488, 217–222 (2009). https://doi.org/10.1016/j.jallcom.2009.08.084CrossRef

G. Chen, G. Xu, Interfacial reaction in twin-roll cast AA1100/409L clad sheet during different sequence of cold rolling and annealing. Met. Mater. Int. 27, 3013–3025 (2021). https://doi.org/10.1007/s12540-020-00621-zCrossRef

G. Li, W. Jiang, F. Guan, Z. Zhang, J. Wang, Y. Yu, Z. Fan, Preparation, interfacial regulation and strengthening of Mg/Al bimetal fabricated by compound casting: a review. J. Magnes. Alloy. 11, 3059–3098 (2023). https://doi.org/10.1016/j.jma.2023.09.001CrossRef

G. Li, W. Jiang, F. Guan, J. Zhu, Y. Yu, Z. Fan, Microstructure evolution, mechanical properties and fracture behavior of Al-xSi/AZ91D bimetallic composites prepared by a compound casting. J. Magnes. Alloy. (2022). https://doi.org/10.1016/j.jma.2022.08.010CrossRef

S. Fan, W. Jiang, G. Li, J. Mo, Z. Fan, Fabrication and microstructure evolution of Al/Mg bimetal using a near-net forming process. Mater. Manuf. Processes 32, 1391–1397 (2017). https://doi.org/10.1080/10426914.2017.1328118CrossRef

F.J. Yao, G.Q. You, L. Wang, Q. Li, S. Zeng, Y. Ming, Design, fabrication, microstructure, and mechanical properties of interlayer-free vacuum diffusion bonding Mg/Ti composites. Vacuum 199, 110947 (2022). https://doi.org/10.1016/j.vacuum.2022.110947CrossRef

10.

C.W. Tan, X.G. Song, B. Chen, L.Q. Li, J.C. Feng, Enhanced interfacial reaction and mechanical properties of laser welded-brazed Mg/Ti joints with Al element from filler. Mater. Lett. 167, 38–42 (2016). https://doi.org/10.1016/j.matlet.2015.12.119CrossRef

11.

C.W. Tan, B. Chen, S.H. Meng, K.P. Zhang, X.G. Song, L. Zhou, J.C. Feng, Microstructure and mechanical properties of laser welded-brazed Mg/Ti joints with AZ91 Mg based filler. Mater. Des. 99, 127–134 (2016). https://doi.org/10.1016/j.matdes.2016.03.073CrossRef

12.

J.J. Shangguan, J.H. Zhao, Y. Shi, C. Gu, B.Y. Jin, J. Cheng, Y. Guo, Effects of Zn interlayer on microstructures and mechanical properties of TC4/AZ91D bimetal via solid-liquid compound casting process. Int. J. Metalcast. 16, 419–434 (2022). https://doi.org/10.1007/s40962-021-00612-9CrossRef

13.

F.L. Wen, J.H. Zhao, M.W. Yuan, J.F. Wang, D.Z. Zheng, J.Y. Zhang, K. He, J.J. Shangguan, Y. Guo, Influence of Ni interlayer on interfacial microstructure and mechanical properties of Ti-6Al-4V/AZ91D bimetals fabricated by a solid–liquid compound casting process. J. Magnesium Alloys 9, 1382–1395 (2021). https://doi.org/10.1016/j.jma.2020.05.021CrossRef

14.

F. Wen, J. Zhao, K. Feng, M. Yuan, D. Zheng, C. Gu, B. Xu, Investigation of Cu interlayer on joint formation of Ti/Mg bimetal fabricated by liquid-solid compound casting process. Met. Mater. Int. 28, 1711–1724 (2022). https://doi.org/10.1007/s12540-021-01027-1CrossRef

15.

W. Jiang, H. Jiang, G. Li, F. Guan, J. Zhu, Z. Fan, Microstructure, mechanical properties and fracture behavior of magnesium/steel bimetal using compound casting assisted with hot-dip aluminizing. Met. Mater. Int. 27, 2977–2988 (2021). https://doi.org/10.1007/s12540-019-00606-7CrossRef

16.

J. Cheng, J. Zhao, D. Zheng, K. He, Y. Guo, Effect of the vacuum heat treatment on the microstructure and mechanical properties of the galvanized-Q235/AZ91D bimetal material produced by solid-liquid compound casting. Met. Mater. Int. 27, 545–555 (2021). https://doi.org/10.1007/s12540-019-00503-zCrossRef

17.

B. Onuike, A. Bandyopadhyay, Functional bimetallic joints of Ti6Al4V to SS410. Addit. Manuf. 31, 100931 (2020). https://doi.org/10.1016/j.addma.2019.100931CrossRefPubMed

18.

A.M. Atieh, T.I. Khan, TLP bonding of Ti-6Al-4V and Mg-AZ31 alloys using pure Ni electro-deposited coats. J. Mater. Process. Technol. 214, 3158–3168 (2014). https://doi.org/10.1016/j.jmatprotec.2014.07.028CrossRef

19.

Z.Q. Zhang, C.W. Tan, G. Wang, B. Chen, X.G. Song, H.Y. Zhao, L.Q. Li, J.C. Feng, Laser welding-brazing of immiscible AZ31B Mg and Ti-6Al-4V alloys using an electrodeposited Cu interlayer. J. Mater. Eng. Perform. 27, 1414–1426 (2018). https://doi.org/10.1007/s11665-018-3196-yCrossRef

20.

J.J. Shangguan, J.H. Zhao, J.X. Zhang, C. Gu, Y. Shi, Y.J. Wang, Improving shear strength of Ti/Mg bimetal composites prepared by hot-dip aluminizing and solid–liquid compound casting. Adv. Eng. Mater. 24, 2200298 (2022). https://doi.org/10.1002/adem.202200298CrossRef

21.

A. AlHazaa, I. Alhoweml, M.A. Shar, M. Hezam, H.S. Abdo, H. AlBrithen, Transient liquid phase bonding of Ti-6Al-4V and Mg-AZ31 alloys using Zn coatings. Materials 12, 769 (2019). https://doi.org/10.3390/ma12050769CrossRefPubMedPubMedCentral

22.

Z. Zhang, W. Jiang, G. Li, J. Wang, F. Guan, G. Jie, Z. Fan, Effect of La on microstructure, mechanical properties and fracture behavior of Al/Mg bimetallic interface manufactured by compound casting. J. Mater. Sci. Technol. 105, 214–225 (2022). https://doi.org/10.1016/j.jmst.2021.08.011CrossRef

23.

F. Wen, J. Zhao, M. Yuan, J. Wang, D. Zheng, J. Zhang, K. He, J. Shangguan, Y. Guo, Influence of Ni interlayer on interfacial microstructure and mechanical properties of Ti-6Al-4V/AZ91D bimetals fabricated by a solid–liquid compound casting process. J. Magnes. Alloy 9, 1382–1395 (2021). https://doi.org/10.1016/j.jma.2020.05.021CrossRef

24.

M. Gao, Z.M. Wang, X.Y. Li, X.Y. Zeng, Laser keyhole welding of dissimilar Ti-6Al-4V titanium alloy to AZ31B magnesium alloy. Metall. Mater. Trans. A 43, 163–172 (2012). https://doi.org/10.1007/s11661-011-0825-6CrossRef

25.

T. Bagnato, A.R. Ravindran, A. Mirabedini, R.B. Ladani, E. Kandare, A.C. Orifici, P. Chang, J. Wang, A.P. Mouritz, Superior interfacial toughening of hybrid metal-composite structural joints using 3D printed pins. Compos. A: Appl. Sci. Manuf. 168, 107479 (2023). https://doi.org/10.1016/j.compositesa.2023.107479CrossRef

26.

N. Li, P.H. Chen, X.Y. Liu, W. Ma, X.C. Wang, A micro-macro finite element model for failure prediction of Comeld^TM joints. Compos. Sci. Technol. 117, 334–341 (2015). https://doi.org/10.1016/j.compscitech.2015.07.001CrossRef

27.

W. Xiong, B. Blackman, J.P. Dear, X. Wang, The effect of composite orientation on the mechanical properties of hybrid joints strengthened by surfi-sculpt. Compos. Struct. 134, 587–592 (2015). https://doi.org/10.1016/j.compstruct.2015.08.083CrossRef

28.

S. Ucsnik, M. Scheerer, S. Zaremba, D.H. Pahr, Experimental investigation of a novel hybrid metal–composite joining technology. Compos. A: Appl. Sci. Manuf. 41, 369–374 (2010). https://doi.org/10.1016/j.compositesa.2009.11.003CrossRef

29.

S. Heimbs, A.C. Nogueira, E. Hombergsmeier, M. May, J. Wolfrum, Failure behaviour of composite T-joints with novel metallic arrow-pin reinforcement. Compos. Struct. 110, 16–28 (2014). https://doi.org/10.1016/j.compstruct.2013.11.022CrossRef

30.

M. Grasso, B.M. Colosimo, Process defects and in situ monitoring methods in metal powder bed fusion: a review. Meas. Sci. Technol. 28, 044005 (2017). https://doi.org/10.1088/1361-6501/aa5c4fCrossRef

31.

A.T.T. Nguyen, M. Brandt, S. Feih, A.C. Orifici, Pin pull-out behaviour for hybrid metal-composite joints with integrated reinforcements. Compos. Struct. 155, 160–172 (2016). https://doi.org/10.1016/j.compstruct.2016.07.047CrossRef

32.

A.T.T. Nguyen, C.K. Amarasinghe, M. Brandt, S. Feih, A.C. Orifici, Loading, support and geometry effects for pin-reinforced hybrid metal-composite joints. Compos. A: Appl. Sci. Manuf. 98, 192–206 (2017). https://doi.org/10.1016/j.compositesa.2017.03.019CrossRef

33.

A.T.T. Nguyen, N. Pichitdej, M. Brandt, S. Feih, A.C. Orifici, Failure modelling and characterisation for pin-reinforced metal-composite joints. Compos. Struct. 188, 185–196 (2018). https://doi.org/10.1016/j.compstruct.2017.12.043CrossRef

34.

T. Maconachie, M. Leary, B. Lozanovski, X. Zhang, M. Qian, O. Faruque, M. Brandt, SLM lattice structures: properties, performance, applications and challenges. Mater. Des. 183, 108137 (2019). https://doi.org/10.1016/j.matdes.2019.108137CrossRef

35.

H. Lei, C. Li, J. Meng, H. Zhou, Y. Liu, X. Zhang, P. Wang, D. Fang, Evaluation of compressive properties of SLM-fabricated multi-layer lattice structures by experimental test and μ-CT-based finite element analysis. Mater. Des. 169, 107685 (2019). https://doi.org/10.1016/j.matdes.2019.107685CrossRef

36.

S. McKown, Y. Shen, W.K. Brookes, C.J. Sutcliffe, W.J. Cantwell, G.S. Langdon, G.N. Nurick, M.D. Theobald, The quasi-static and blast loading response of lattice structures. Int. J. Impact Eng 35, 795–810 (2008). https://doi.org/10.1016/j.ijimpeng.2007.10.005CrossRef

37.

M. Mazur, M. Leary, S. Sun, M. Vcelka, D. Shidid, M. Brandt, Deformation and failure behaviour of Ti-6Al-4V lattice structures manufactured by selective laser melting (SLM). Int. J. Adv. Manuf. Technol. 84, 1391–1411 (2016). https://doi.org/10.1007/s00170-015-7655-4CrossRef

38.

A. Alghamdi, T. Maconachie, D. Downing, M. Brandt, M. Qian, M. Leary, Effect of additive manufactured lattice defects on mechanical properties: an automated method for the enhancement of lattice geometry. Int. J. Adv. Manuf. Technol. 108, 957–971 (2020). https://doi.org/10.1007/s00170-020-05394-8CrossRef

39.

T. Hasegawa, K. Okazaki, Analysis of strain rate dependence of tensile elongation for a mechanical milling Al–1.1Mg–1.2Cu alloy tested at 748 K from a dislocation dynamics viewpoint. Mater. Sci. Eng. A 260, 294–300 (1999). https://doi.org/10.1016/S0921-5093(98)00961-7CrossRef

40.

F. Zhao, Y.L. Li, T. Suo, W.D. Huang, J.R. Liu, Compressive deformation behavior of AZ31 magnesium alloy under quasi-static and dynamic loading. Trans. Nonferr. Metal. Soc. China 20, 1316–1320 (2010). https://doi.org/10.1016/S1003-6326(09)60297-1CrossRef

41.

N. Tahreen, D.L. Chen, M. Nouri, D.Y. Li, Effects of aluminum content and strain rate on strain hardening behavior of cast magnesium alloys during compression. Mater. Sci. Eng. A 594, 235–245 (2014). https://doi.org/10.1016/j.msea.2013.11.078CrossRef

42.

Y. Liu, J.H. Meng, L. Zhu, H.Y. Chen, Z.G. Li, S.X. Li, D. Wang, Y.G. Wang, K. Kosiba, Dynamic compressive properties and underlying failure mechanisms of selective laser melted Ti-6Al-4V alloy under high temperature and strain rate conditions. Addit. Manuf. 54, 102772 (2022). https://doi.org/10.1016/j.addma.2022.102772CrossRef

43.

I.R. Ahmad, D.W. Shu, Tensile properties of die-cast magnesium alloy AZ91D at high strain rates in the range between 300 s(-1) and 1500 s(-1). Appl. Mech. Mater. VII 24, 325–330 (2010). https://doi.org/10.4028/www.scientific.net/AMM.24-25.325CrossRef

44.

Y. Shimizu, S. Miki, T. Soga, I. Itoh, H. Todoroki, T. Hosono, K. Sakaki, T. Hayashi, Y.A. Kim, M. Endo, S. Morimoto, A. Koide, Multi-walled carbon nanotube-reinforced magnesium alloy composites. Scr. Mater. 58, 267–270 (2008). https://doi.org/10.1016/j.scriptamat.2007.10.014CrossRef

45.

X. Yang, W. Ma, Z. Zhang, S. Liu, H. Tang, Ultra-high specific strength Ti6Al4V alloy lattice material manufactured via selective laser melting. Mater. Sci. Eng. A 840, 142956 (2022). https://doi.org/10.1016/j.msea.2022.142956CrossRef

46.

Q.X. Feng, Q. Tang, Y. Liu, R. Setchi, S. Soe, S. Ma, L. Bai, Quasi-static analysis of mechanical properties of Ti6Al4V lattice structures manufactured using selective laser melting. Int. J. Adv. Manuf. Technol. 94, 2301–2313 (2018). https://doi.org/10.1007/s00170-017-0932-7CrossRef

47.

A. Santos, E. Córdoba, Z. Ramírez, C. Sierra, Y. Ortega, Determination of the coefficient of dynamic friction between coatings of alumina and metallic materials. in Journal of Physics: Conference Series 935, 012042 (2017). https://doi.org/10.1088/1742-6596/935/1/012042

48.

SIMULIA, Abaqus/CAE 6.14 User’s Manual, (Dassault Systémes Inc, Provid. RI, USA, 2014), pp. 1–1146. https://www.scopus.com/inward/record.uri?eid=2-s2.0-85089823156&partnerID=40&md5=a05a511616dc358e75723ebf30084b49

49.

T.E.D. Belytschko, The finite element method: linear static and dynamic finite element analysis—Thomas J. R. Hughes. Comput. Aided Civ. Infrastruct. Eng. 4, 245–246 (1989). https://doi.org/10.1111/j.1467-8667.1989.tb00025.xCrossRef

50.

Y. Huang, Y. Xue, X. Wang, F. Han, Mechanical behavior of three-dimensional pyramidal aluminum lattice materials. Mater. Sci. Eng. A 696, 520–528 (2017). https://doi.org/10.1016/j.msea.2017.04.053CrossRef

51.

R. Guo, L. Liu, Preparation and experimental study on anti-penetration capability of the interlocking lattice sandwich plate filled with ceramic rods and hybrid fillers. J. Sandwich Struct. Mater. 20, 153–168 (2018). https://doi.org/10.1177/1099636216643426CrossRef

52.

R. Gümrük, R.A.W. Mines, Compressive behaviour of stainless steel micro-lattice structures. Int. J. Mech. Sci. 68, 125–139 (2013). https://doi.org/10.1016/j.ijmecsci.2013.01.006CrossRef

53.

K. Ushijima, W.J. Cantwell, R.A.W. Mines, S. Tsopanos, M. Smith, An investigation into the compressive properties of stainless steel micro-lattice structures. J. Sandwich Struct. Mater. 13, 303–329 (2010). https://doi.org/10.1177/1099636210380997CrossRef

54.

M. Simonelli, Y.Y. Tse, C. Tuck, Effect of the build orientation on the mechanical properties and fracture modes of SLM Ti–6Al–4V. Mater. Sci. Eng. A 616, 1–11 (2014). https://doi.org/10.1016/j.msea.2014.07.086CrossRef

55.

J. Schukraft, D. Horny, K. Schulz, K.A. Weidenmann, 3D modeling and experimental investigation on the damage behavior of an interpenetrating metal ceramic composite (IMCC) under compression. Mater. Sci. Eng. A 844, 143147 (2022). https://doi.org/10.1016/j.msea.2022.143147CrossRef

56.

M. Balasubramanian, Application of Box–Behnken design for fabrication of titanium alloy and 304 stainless steel joints with silver interlayer by diffusion bonding. Mater. Des. 77, 161–169 (2015). https://doi.org/10.1016/j.matdes.2015.04.003CrossRef

57.

K. Yetilmezsoy, A. Saral, Stochastic modeling approaches based on neural network and linear–nonlinear regression techniques for the determination of single droplet collection efficiency of countercurrent spray towers. Environ. Model. Assess. 12, 13–26 (2007). https://doi.org/10.1007/s10666-006-9048-4CrossRef

58.

Q. Zhao, Z.B. Shao, Q.C. Leng, X.D. Zhang, C.J. Liu, B.K. Li, M.F. Jiang, Preparation of Cu-Cr alloy powder by heat mechanical alloying and Box–Behnken design based optimization. Powder Technol. 321, 326–335 (2017). https://doi.org/10.1016/j.powtec.2017.08.039CrossRef

59.

R.K. Tayal, S. Kumar, V. Singh, R. Garg, Characterization and microhardness evaluation of A356/Mg joint produced by vacuum-assisted sand mold compound casting process. Int. J. Metalcast. 13, 392–406 (2019). https://doi.org/10.1007/s40962-018-0264-xCrossRef

60.

A. Balasundaram, A.M. Gokhale, Quantitative characterization of spatial arrangement of shrinkage and gas (air) pores in cast magnesium alloys. Mater Charact 46, 419–426 (2001). https://doi.org/10.1016/S1044-5803(01)00141-3CrossRef

61.

D.L. Prakash, B. Prasanna, D. Regener, Computational microstructure analyzing technique for quantitative characterization of shrinkage and gas pores in pressure die cast AZ91 magnesium alloys. Comput. Mater. Sci. 32, 480–488 (2005). https://doi.org/10.1016/j.commatsci.2004.09.017CrossRef

62.

Y. Li, H. Yang, X. Lin, W. Huang, J. Li, Y. Zhou, The influences of processing parameters on forming characterizations during laser rapid forming. Mater. Sci. Eng. A 360, 18–25 (2003). https://doi.org/10.1016/S0921-5093(03)00435-0CrossRef

63.

J.J. Ding, Q.W. Qin, S.M. Hao, X.T. Wang, G.L. Chen, Partial phase diagram of the Ti-Al binary system. J. Phase Equilib. 17, 117–120 (1996). https://doi.org/10.1007/BF02665786CrossRef

64.

H. Zhang, Y. Chen, A.A. Luo, A novel aluminum surface treatment for improved bonding in magnesium/aluminum bimetallic castings. Scr. Mater. 86, 52–55 (2014). https://doi.org/10.1016/j.scriptamat.2014.05.007CrossRef

Title: Enhanced Interfacial Joining Strength of Mg/Ti Bimetal Casting via 3D-Printed Ti-Based Lattice Material
Authors: Yuanbing Wu
Jianhua Zhao
Likun Yu
Cheng Gu
Publication date: 29-02-2024
Publisher: The Korean Institute of Metals and Materials
Published in: Metals and Materials International / Issue 8/2024
Print ISSN: 1598-9623
Electronic ISSN: 2005-4149
DOI: https://doi.org/10.1007/s12540-024-01640-w

Springer Professional

Abstract

Graphical Abstract

Please log in to get access to your license.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Other articles of this Issue 8/2024

Effect of Solution Annealing Temperature on Liquation Cracking Susceptibility of Alloy 617M

Effect of Initial Microstructures on Planar Tensile Anisotropy and Fatigue Crack Growth of Creep Age Formed 2050 Al–Li Alloy

Utilization of Hot Deformation to Trigger Strain-Induced Boundary Migration, Particle-Stimulated Nucleation, and Influence of Nano-Precipitates on Mechanical Properties in High-Alloyed Al–Zn–Mg–Cu Alloys

Melting Properties and Phase Composition Transformation of Ti-Bearing Electric Furnace Slags in CaO–SiO2–MgO–Al2O3–50%TiO2 System

A Practical Inverse Identification of Johnson–Cook Parameters at Intermediate Strain Rates Using Split Hopkinson Pressure Bar Test

Microstructure Evolution and Property of Spray-Formed Cu-10 wt% Fe Alloy During Cold Rolling