Skip to main content
Top
Published in: Production Engineering 2-3/2013

01-04-2013 | Machine Tool

Environment sensing for the creation of work cell models

Authors: Christian Brecher, Thomas Breitbach, Christian Ecker, Wolfram Lohse

Published in: Production Engineering | Issue 2-3/2013

Log in

Activate our intelligent search to find suitable subject content or patents.

search-config
loading …

Abstract

Since small and medium enterprises (SME) mostly produce small lot sizes, industrial robots cannot be applied profitably. This is due to the fact that the efforts for commissioning, such as expert knowledge, set-up time and know-how—compared to manual manufacturing—lead to an unbalanced cost benefit ratio. Hence, commissioning methods need to be developed, providing special commission processes within SMEs. A promising approach is the combination of the individual advantages of the online and offline commissioning in order to support untrained operators. Those hybrid commissioning methods assure the robot motion by simulation, whereby a virtual model of the work cell is required which includes exact solid models for all objects (e.g. robots, machines, fences) in the workspace of the robot. Within SMEs, those solid models are often available for a few objects only. Therefore, the required work cell model cannot be constructed using conventional modeling methods. This paper presents an approach for combining measured 3D depth data with accurate CAD models.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

  • über 102.000 Bücher
  • über 537 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Finance + Banking
  • Management + Führung
  • Marketing + Vertrieb
  • Maschinenbau + Werkstoffe
  • Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

  • über 67.000 Bücher
  • über 390 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Maschinenbau + Werkstoffe




 

Jetzt Wissensvorsprung sichern!

Literature
1.
go back to reference Schuh G, Meier J, Wellensiek M (2005) Chance robotik. ZWF Zeitschrift für wirtschaftlichen Fabrikbetrieb 07–08:416–419 Schuh G, Meier J, Wellensiek M (2005) Chance robotik. ZWF Zeitschrift für wirtschaftlichen Fabrikbetrieb 07–08:416–419
2.
go back to reference Brecher C, Schröter B, Kürzel A, Herchel M, Matthias B (2006) Portable robot systems for machine tending tasks. In: Proceedings of the 37th international symposium on robotics, München, pp 15–17. Mai 2006 Brecher C, Schröter B, Kürzel A, Herchel M, Matthias B (2006) Portable robot systems for machine tending tasks. In: Proceedings of the 37th international symposium on robotics, München, pp 15–17. Mai 2006
3.
go back to reference Klempnow H, Steinhagen G, Bilek E, Kuhlenkötter B (2011) Innovative Fortbildung in Roboteranwendungen. wt Werkstattechnik online Jahrgang 101 (2011) H. 11/12 Klempnow H, Steinhagen G, Bilek E, Kuhlenkötter B (2011) Innovative Fortbildung in Roboteranwendungen. wt Werkstattechnik online Jahrgang 101 (2011) H. 11/12
4.
go back to reference Wenk M (2009) Virtuelle inbetriebnahme von produktionsanlagen. Automation Valley Profile 10.11.2009/2 Wenk M (2009) Virtuelle inbetriebnahme von produktionsanlagen. Automation Valley Profile 10.11.2009/2
5.
go back to reference Göbel M (2012) Verfahren zur intuitiven programmierung von industrierobotern durch demonstration. Apprimus Verlag. ISBN 978-3-86359-067-3 Göbel M (2012) Verfahren zur intuitiven programmierung von industrierobotern durch demonstration. Apprimus Verlag. ISBN 978-3-86359-067-3
6.
go back to reference Brecher C, Roßmann J, Schlette C, Herfs W, Ruf H, Göbel M (2010) Intuitive roboter-programmierung in der automatisierten montage. wt Werkstattechnik online Jahrgang 100 (2010) H. 9 Brecher C, Roßmann J, Schlette C, Herfs W, Ruf H, Göbel M (2010) Intuitive roboter-programmierung in der automatisierten montage. wt Werkstattechnik online Jahrgang 100 (2010) H. 9
7.
go back to reference Suppa M (2008) Autonomous robot work cell exploration using multisensory eye-in-hand systems. Fortschritt-Berichte, Meß-, Steuerungs- und Regelungstechnik, VDI Verlag Suppa M (2008) Autonomous robot work cell exploration using multisensory eye-in-hand systems. Fortschritt-Berichte, Meß-, Steuerungs- und Regelungstechnik, VDI Verlag
8.
go back to reference Besl P, McKay N (1992) A method for registration of 3-D shapes. IEEE Trans Pattern Anal Mach Intell 239–256 Besl P, McKay N (1992) A method for registration of 3-D shapes. IEEE Trans Pattern Anal Mach Intell 239–256
9.
go back to reference Rusinkiewicz S, Levoy M (2001) Efficient variants of the ICP algorithm. In: Proceedings the third international conference on 3-D digital imaging and modeling. IEEE Computer Society, pp 145–152. ISBN 0-7695-0984-3 Rusinkiewicz S, Levoy M (2001) Efficient variants of the ICP algorithm. In: Proceedings the third international conference on 3-D digital imaging and modeling. IEEE Computer Society, pp 145–152. ISBN 0-7695-0984-3
10.
go back to reference Simon D, Hebert M, Kanade T (1994) Real-time 3-D pose estimation using a high-speed range sensor. SIMO94. In: Proceedings of the 1994 IEEE international conference on robotics and automation. IEEE, pp 2235–2241 Simon D, Hebert M, Kanade T (1994) Real-time 3-D pose estimation using a high-speed range sensor. SIMO94. In: Proceedings of the 1994 IEEE international conference on robotics and automation. IEEE, pp 2235–2241
11.
go back to reference Schröter B (2008) Inertiale positionserfassung zur programmierung robotergestützter handhabungsaufgaben. Apprimus Verlag. ISBN 978-3-940565-18-1 Schröter B (2008) Inertiale positionserfassung zur programmierung robotergestützter handhabungsaufgaben. Apprimus Verlag. ISBN 978-3-940565-18-1
12.
go back to reference Klosowski J, Held M, Mitchell J et al (1998) Efficient collision detection using bounding volume hierarchies of k-DOPs. IEEE Trans Visual Comput Graph 4(1):21–36CrossRef Klosowski J, Held M, Mitchell J et al (1998) Efficient collision detection using bounding volume hierarchies of k-DOPs. IEEE Trans Visual Comput Graph 4(1):21–36CrossRef
13.
go back to reference Khoshelham K (2010) Accuracy analysis of the kinect depth data. GeoInform Sci 38(5/W12):1–6 Khoshelham K (2010) Accuracy analysis of the kinect depth data. GeoInform Sci 38(5/W12):1–6
14.
go back to reference Pierce J, Agrawala M, Klemmer S et al (2011) KinectFusion. In: Proceedings of the 24th annual ACM symposium on user interface software and technology—UIST ‘11. ACM Press, New York, p 559 Pierce J, Agrawala M, Klemmer S et al (2011) KinectFusion. In: Proceedings of the 24th annual ACM symposium on user interface software and technology—UIST ‘11. ACM Press, New York, p 559
15.
go back to reference Newcombe RA, Davison AJ, Izadi S et al (2011) KinectFusion: real-time dense surface mapping and tracking. In: Proceedings of the 10th IEEE international symposium on mixed and augmented reality. IEEE, pp 127–136 Newcombe RA, Davison AJ, Izadi S et al (2011) KinectFusion: real-time dense surface mapping and tracking. In: Proceedings of the 10th IEEE international symposium on mixed and augmented reality. IEEE, pp 127–136
16.
go back to reference Shaowen X, Zhenyu Y, Weiyong W (2010) Algorithm of denoising based on point cloud segmentation. SHAO10. In: Proceedings of the 5th international conference on computer science and education (ICCSE). IEEE, pp 1707–1711 Shaowen X, Zhenyu Y, Weiyong W (2010) Algorithm of denoising based on point cloud segmentation. SHAO10. In: Proceedings of the 5th international conference on computer science and education (ICCSE). IEEE, pp 1707–1711
Metadata
Title
Environment sensing for the creation of work cell models
Authors
Christian Brecher
Thomas Breitbach
Christian Ecker
Wolfram Lohse
Publication date
01-04-2013
Publisher
Springer-Verlag
Published in
Production Engineering / Issue 2-3/2013
Print ISSN: 0944-6524
Electronic ISSN: 1863-7353
DOI
https://doi.org/10.1007/s11740-013-0448-4

Other articles of this Issue 2-3/2013

Production Engineering 2-3/2013 Go to the issue

Premium Partners