European Journal of Wood and Wood Products

Editorial

The effect of acetylated particle distribution and type of resin on physical and mechanical properties of poplar particleboard

Hamideh Abdolzadeh, Kazem Doosthoseini, Ali Naghi Karimi, Ali Akbar Enayati

Cutting energy and surface roughness in medium density fiberboard rip sawing

Alfredo Aguilera

Effect of kiln drying schedule on the quality of South African grown Eucalyptus grandis poles

Paul Mugabi, Tim Rypstra, H. F. Vermaas, Daan G. Nel

Physical and mechanical properties of oriented strand lumber made from an Asian bamboo (Dendrocalamus asper Backer)

Pannipa Malanit, Marius C. Barbu, Arno Frühwald

Extractives in the cones of Pinus species

Ayben Kilic, Harzemsah Hafizoglu, Ilhami Emrah Dönmez, Ibrahim Tümen, Hüseyin Sivrikaya, Markku Reunanen, Jarl Hemming

Fire performance and decay resistance of solid wood and plywood treated with quaternary ammonia compounds and common fire retardants

Evren Terzi, S. Nami Kartal, Robert H. White, Katsumi Shinoda, Yuji Imamura

Effects of cold setting adhesives on properties of laminated veneer lumber from oil palm trunks in comparison with rubberwood

Rokiah Hashim, Siti Noorbaini Sarmin, Othman Sulaiman, Lili Hanum Md. Yusof

Phenolic extractives of cones and berries from Turkish coniferous species

A. Kilic, H. Hafizoglu, I. Tümen, I. E. Dönmez, H. Sivrikaya, J. Hemming

Suitability of auger drill sampling for the measurement of moisture content gradient in kiln-dried South African grown Eucalyptus grandis poles

P. Mugabi, T. Rypstra, H. F. Vermaas, D. G. Nel

Sawdust of lam tree (Cordia africana) as a low-cost, sustainable and easily available adsorbent for the removal of toxic metals like Pb(II) and Ni(II) from aqueous solution

Syed Muzaffar Ali Andrabi

Tensile properties of cork in axial stress and influence of porosity, density, quality and radial position in the plank

Ofélia Anjos, Helena Pereira, M. Emília Rosa

Influence of the slicing technique on mechanical properties of the produced veneer

Alexander Pfriem, Beate Buchelt

Thermal stability of glued wood joints measured by shear tests

Sebastian Clauß, Matus Joscak, Peter Niemz

Chain of custody certification: an assessment of Ghanaian timber sector

A. Attah, F. Ioras, J. Ratnasingam, I. V. Abrudan

Influence of steam pressure on physical and mechanical properties of heat-treated Mongolian pine lumber

Tao Ding, Lianbai Gu, Tao Li

Dust-generation characteristics of hardwoods during sanding processes

J. Ratnasingam, F. Scholz, V. Natthondan, M. Graham

Embedment tests perpendicular to the grain – optical measurements of deformation fields

J. C. M. (Dennis) Schoenmakers, S. Svensson

Shear strength of glued laminated timber made from European beech timber

Simon Aicher, Denny Ohnesorge

Finger jointing of green Black pine wood (Pinus nigra L.)

George Mantanis, Sotirios Karastergiou, Ioannis Barboutis

Zur Abbrandrate von Holz in Abhängigkeit der Rohdichte

A. Gilka-Bötzow, A. Heiduschke, P. Haller

Zur Herstellung von OSB aus originär dauerhaften Holzarten für die Anwendung im frei bewitterten Außenbereich

Sebastian Treml, Fritz Tröger

Potential error in density profile measurements for wood composites

Lauri Rautkari, Frederick A. Kamke, Mark Hughes