Issue 1/2014
Content (21 Articles)
Editorial
Editorial
Application of high-frequency densitometry to detect changes in early- and latewood density of oak (Quercus robur L.) due to thermal modification
Roman Shchupakivskyy, Lothar Clauder, Nicole Linke, Alexander Pfriem
Enhancing the applicability of near infrared spectroscopy for estimating specific gravity of green timber from Eucalyptus tereticornis by developing composite calibration using both radial and tangential face of wood
Vimal Kothiyal, Aasheesh Raturi, Jaideep, Y. M. Dubey
Load-carrying capacity of timber-to-timber joints of fast-growing Argentinean Eucalyptus grandis with nails of small diameter laterally loaded in double shear: analysis according to the criterion adopted by European standards
M. A. Sosa Zitto, J. Köhler, J. C. Piter
Mechanical and physical properties of thermally modified Scots pine wood in high pressure reactor under saturated steam at 120, 150 and 180 °C
Lauri Rautkari, Juhani Honkanen, Callum A. S. Hill, Daniel Ridley-Ellis, Mark Hughes
Full-field moisture induced deformation in Norway spruce: intra-ring variation of transverse swelling
Christian Lanvermann, Falk K. Wittel, Peter Niemz
Comparison between heat treated sapwood and heartwood from Pinus pinaster
Bruno Esteves, Lina Nunes, Idalina Domingos, Helena Pereira
Some physical and mechanical properties of thermally modified juvenile and mature black pine wood
Bekir Cihad Bal
Influence of different extraction temperatures and methanol solvent percentages on the total phenols and total flavonoids from the heartwood and bark of Acacia auriculiformis
Mun Wai Tham, Kang Chiang Liew
The effect of carbon fibers, glass fibers and nanoclay on wood flour-polypropylene composite properties
Irina Turku, Timo Kärki
Color variation of stained wood products in association to near infrared spectroscopy scans
Ciprian Lazarescu, Kosmas Panagiotidis, Stavros Avramidis
Roundwood pre-grading with longitudinal acoustic waves for production of structural boards
Andreas Rais, Hans Pretzsch, Jan-Willem G. van de Kuilen
Sorption and thermodynamic properties of Terminalia superba Engl. & Diels and Triplochiton scleroxylon K. Schum. through the 15, 35 and 50 °C sorption isotherms
Francisco G. Fernández, Luis G. Esteban, Paloma de Palacios, Cristina Simón, Alberto García-Iruela, Javier de la Fuente
Effects of cutting parameters on cutting forces and surface quality of black spruce cants
Roger E. Hernández, Angela M. Llavé, Ahmed Koubaa
The influence of scavengers on VOC emissions in particleboards made from pine and poplar
N. A. Costa, M. Ohlmeyer, J. Ferra, Fernão D. Magalhães, A. Mendes, L. Carvalho
Temperature charts of Hevea brasiliensis during log steaming and its effect on the board cracks
M. M. A. Pelozzi, E. T. D. Severo, P. L. M. Rodrigues, F. W. Calonego
Wood natural durability testing under laboratory conditions: results from a round-robin test
Christian Brischke, Christian R. Welzbacher, Antje Gellerich, Susanne Bollmus, Miha Humar, Katharina Plaschkies, Wolfram Scheiding, Gry Alfredsen, Joris Van Acker, Imke De Windt
Effects of pre-steaming on the drying quality of Rubberwood
Jegatheswaran Ratnasingam, Rainer Grohmann, Frieder Scholz
Evaluation of termiticidal activity of coconut shell oil and its comparison to commercial wood preservatives
K. S. Shiny, O. K. Remadevi
Effect of end pressure on performance of structural finger-joined lumber fabricated using a short joint profile
Shuzhan Rao, Meng Gong, Y. H. Chui, Mohammad Mohammad