Issue 1/2016
Content (20 Articles)
Editorial
Fumed silica as a filler for MUPF resin in the process of manufacturing water-resistant plywood
Dorota Dukarska, Rafał Czarnecki
Using of expandable fillers to produce low density particleboard
Ali Shalbafan, Olaf Tackmann, Johannes Welling
The effects of wood flour content and coupling agent on the dynamic mechanical and relaxation properties of wood-plastic composites
Feng-Cheng Chang, John F. Kadla, Frank Lam
Describing the sticking phenomenon of aminoplastic resins: dependency on temperature and relative humidity
Alexandra Himsel, Hendrikus W. G. van Herwijnen, Johann Moser, Wolfgang Kantner, Roland Mitter, Jürgen Gießwein, Ulrich Müller
Decay and termite resistance of pine blocks impregnated with different additives and subjected to heat treatment
Solafa Salman, Anélie Pétrissans, Marie France Thévenon, Stéphane Dumarçay, Philippe Gérardin
Thermal modification of European beech at relatively mild temperatures for the use in electric bass guitars
Mario Zauer, Anne Kowalewski, Robert Sproßmann, Holger Stonjek, André Wagenführ
Needle fir wood modified by surface densification and thermal post-treatment: hygroscopicity and swelling behavior
Jian-feng Zhan, Stavros Avramidis
Manufacture and properties of citric acid-bonded particleboard made from bamboo materials
Ragil Widyorini, Kenji Umemura, Ramadhanu Isnan, Dian Rahma Putra, Ali Awaludin, Tibertius Agus Prayitno
Quality assessment of glued ash wood for construction engineering
Samuel Ammann, Sven Schlegel, Mario Beyer, Karsten Aehlig, Martin Lehmann, Heiko Jung, Peter Niemz
Vibro-dynamic compression processing of low-density wood-cement composites
Carlos Frederico Alice Parchen, Setsuo Iwakiri, Florian Zeller, José Guilherme Prata
Mechanical properties of Papua New Guinea balsa wood
Nathan J. Kotlarewski, Benoit Belleville, Benson K. Gusamo, Barbara Ozarska
Bending strength and stiffness of loblolly pine lumber from intensively managed stands located on the Georgia Lower Coastal Plain
Mark Alexander Butler, Joseph Dahlen, Richard F. Daniels, Thomas L. Eberhardt, Finto Antony
The effect of eucalypt tree overaging on pulping and paper properties
Jorge Gominho, Ana Lourenço, Duarte Neiva, Luís Fernandes, Maria Amaral, Ana Paula Duarte, Rogério Simões, Helena Pereira
Barriers for wood processing companies to enter foreign markets: a case study in Slovakia
Vladislav Kaputa, Hubert Paluš, Richard Vlosky
Use of wood powder and adhesive as a mixture for 3D printing
Mirko Kariz, Milan Sernek, Manja Kitek Kuzman
Hybrid silane-crosslinking polymers: a potential alternative to polyurethane wood adhesives? A preliminary investigation by TMA
M. Zanetti, D. Marini, E. Pasqualini, E. Masetto, R. Cavalli
Effects of slow pyrolysis derived birch distillate on the properties of wood-plastic composites
Taneli Väisänen, Laura Tomppo, Mikko Selenius, Reijo Lappalainen
Effect of heat-treatment of flakes on physical and mechanical properties of flakeboard
Jin H. Kwon, Nadir Ayrilmis
Characterization of commercially important Asian bamboo species
Perminder Jit Kaur, Vikas Kardam, K. K. Pant, S. N. Naik, Santosh Satya