Issue 6/2012
Content (20 Articles)
Mechanical properties of thermally modified beech timber for structural purposes
Robert Widmann, José L. Fernandez-Cabo, René Steiger
Inverse determination of effective mechanical properties of adhesive bondlines
Philipp Hass, Falk K. Wittel, Miller Mendoza, Hans J. Herrmann, Peter Niemz
Nondestructive assessment of glued joints in timber applying vibration-based methods
Mehran Roohnia, Mostafa Kohantorabi, Ahmad Jahan-Latibari, Ajang Tajdini, Mohammadreza Ghaznavi
Compressive strength of spruce glulam
Matthias Frese, Markus Enders-Comberg, Hans Joachim Blaß, Peter Glos
Potential for utilizing waste corrugated paper containers into wood composites using UF and PMDI resin systems
Charalampos Lykidis, Chrysanthi Parnavela, Nikolaos Goulounis, Athanasios Grigoriou
On the influence of binder content in particleboards bonded with resins of high and low molar ratio on the formaldehyde release measured by the perforator method
E. Roffael, C. Behn
Study of thermal properties of wood plastic composite reinforced with cellulose micro fibril and nano inorganic fiber filler
Z. Farhadinejad, M. Ehsani, B. Khosravian, G. Ebrahimi
Detection of UF resin on wood particles and in particleboards: potential of selected methods for practice-oriented offline detection
Martin Riegler, Wolfgang Gindl-Altmutter, Markus Hauptmann, Ulrich Müller
Modelling of the mechanical properties of Castanea sativa Mill. structural timber by a combination of non-destructive variables and visual grading parameters
Abel Vega, Andrés Dieste, Manuel Guaita, Juan Majada, Vanessa Baño
XRF examination of matrix uniqueness in chosen deciduous wood species
T. Zielenkiewicz, A. Radomski, J. Zawadzki
Analysing orthotropy in the core layer of wood based panels by means of fracture mechanics
Jörn Rathke, Gerhard Sinn, Martin Weigl, Ulrich Müller
Kinetic studies of the acetylation reaction of small Pinus radiata blocks
Elizabeth A. Dunningham
Macroscopic and microscopic monitoring of swelling of beech wood after impregnation with furfuryl alcohol
Beate Buchelt, Tobias Dietrich, André Wagenführ
Assessment of phenomenological failure criteria for wood
J. M. Cabrero, C. Blanco, K. G. Gebremedhin, A. Martin-Meizoso
Determination of settings in combined strength, stiffness and density grading of timber
Alpo Ranta-Maunus
Correlation between brown rot decay and Pilodyn measurements
Nejc Thaler, Boštjan Lesar, Miha Humar
Adhesive bonding of beech wood modified with a phenol formaldehyde compound
Stergios Adamopoulos, Alireza Bastani, Patricia Gascón-Garrido, Holger Militz, Carsten Mai
The significance of lap-shear testing of wood adhesive bonds by means of Volkersen’s shear lag model
W. Gindl-Altmutter, U. Müller, J. Konnerth
FTIR examination of preservative retention in beech wood (Fagus sylvatica L.)
T. Gołofit, T. Zielenkiewicz, J. Gawron
On the formaldehyde release of wood particles
E. Roffael, C. Behn, B. Dix